Alpha Park
•
0 gostou•1,313 visualizações
A parceria entre a Helbor e EBM começou em 1998 e resultou em 24 empreendimentos com 2.942 unidades, a maioria já concluída. O Alpha Park é o mais recente projeto, lançado em 2007, com 168 unidades divididas em duas torres de 13 andares cada na Avenida Alpha em Salvador. O empreendimento conta com diversas áreas comuns como piscina, cinema e academia.
Denunciar
Compartilhar
Denunciar
Compartilhar
Baixar para ler offline
Recomendados
TOPAZ ACLIMAÇÃO
TOPAZ ACLIMAÇÃO
Área do terreno: 2.402m2
Área privativa unidade: 213 m² (tipo) / 364 (cobertura duplex)
Número de torres: 01
Planta: 4 suítes
Produto: Residencial
Número total de pavimentos: 27 tipos + 1 cobertura duplex
Número total por andar: 1 UNIDADES POR ANDAR
Número total de unidades: 28
Vagas: 3 e 4 vagas p/ tipo e 5 vagas p/ cobertura
Elevadores: 1 social e 1 serviço
LAZER
Playground, Piscina com raia de 25m, Piscina infantil, Salão de festas, Fitness, Sauna com descanso e ducha, Solarium, Quadra de Tênis e Brinquedoteca.
Rubcrete
In this paper, the authors have discussed about the replacement of aggregates by discarded tyre rubber. This type of concrete is known as “Rubcrete”. It will cover the problems with the natural aggregate and also the reasons behind the use of rubber. The types of tyre rubber that are used, influence of size and content of rubber on concrete, effect of surface texture are discussed. Change in the properties of rubcrete over the conventional concrete, in hardened and fresh state such as slump, unit weight, air content, plastic shrinkage, mechanical strength been discussed. Paper covers the mechanisms behind the strength change, impact resistance, heat and sound insulation, freezing and thawing resistance of rubcrete. At the last, discussion on applications of rubcrete.
26678635 is-code-1343-for-pre-stressed-concrete
This document is the Indian Standard Code of Practice for Prestressed Concrete (First Revision). It provides guidelines for the structural use of prestressed concrete, covering both on-site work and precast prestressed concrete units. The code contains four sections dealing with general provisions, materials/workmanship/testing, general design requirements, and structural design using the limit state method. It incorporates changes from the previous version to unify prestressed and reinforced concrete provisions and introduce limit state design concepts.
Mini projects for_civil_engineering_(3)_(1) (1) (1)
This document lists 163 potential mini project topics for civil engineering students in their second, third, or fourth year. The topics cover a wide range of areas related to civil engineering, including air and water pollution monitoring, use of industrial waste materials in construction, soil testing and stabilization, traffic studies, structural analysis, and municipal infrastructure design. The mini projects are intended to provide hands-on learning opportunities for students in their undergraduate studies.
Section 400
The document discusses specifications for granular sub-base materials and construction. It describes four gradings for granular sub-base materials, with gradings I and II being well-graded and gradings III and IV being gap-graded to address drainage requirements. The specifications provide details on material quality tests, construction procedures for spreading, compacting, and finishing the sub-base, and requirements for quality control. Lime treatment of soil for improved sub-grade or sub-base is also covered, including allowable soil and lime materials and determining the appropriate quantity of lime to add.
Performance studies on reclaimed asphalt SMA 2014
The document discusses the use of recycled asphalt pavement (RAP) in stone matrix asphalt mixes, with RAP replacements of 10%, 30%, and 50% tested. Laboratory tests such as the Marshall test and indirect tensile strength test were conducted on specimens to evaluate the performance of mixes with different RAP contents. The results of the tests were analyzed to determine the optimum RAP percentage for stone matrix asphalt based on strength and economic considerations.
Practical Application of GI Technique Rev 0 HAKI pdf
Ground improvement techniques are used to strengthen weak soils and improve the performance of structures. The document discusses several techniques:
Consolidation techniques like prefabricated vertical drains and vacuum consolidation accelerate drainage and reduce voids in soil. Inclusion techniques like vibro stone columns and soil-cement mixing introduce elements to reinforce soil. Compaction techniques like vibro compaction and dynamic compaction densify soil. Selection of a technique depends on soil type, project needs, and costs. The document provides examples of applying techniques for liquefaction mitigation, infrastructure projects, and describes Bauer's vibro equipment and quality control methods.
Underwater Tunnels
1. Underwater tunnels are transport routes that are partly or wholly constructed under bodies of water, with different types including soft ground tunnels dug below the ocean bed, immersed tunnels made on the ocean floor, and floating submerged tunnels that float due to attached tethers.
2. Constructing underwater tunnels presents significant engineering challenges due to the tremendous water pressure from above and squeezing pressure from soft ground. Different tunnel construction methods are used depending on the material and conditions.
3. A proposed transatlantic underwater tunnel would connect North America and Europe, but presents massive challenges including the scales of resources, time, and extreme working conditions required that make completion effectively impossible with current technology.
Recomendados
TOPAZ ACLIMAÇÃO
TOPAZ ACLIMAÇÃO
Área do terreno: 2.402m2
Área privativa unidade: 213 m² (tipo) / 364 (cobertura duplex)
Número de torres: 01
Planta: 4 suítes
Produto: Residencial
Número total de pavimentos: 27 tipos + 1 cobertura duplex
Número total por andar: 1 UNIDADES POR ANDAR
Número total de unidades: 28
Vagas: 3 e 4 vagas p/ tipo e 5 vagas p/ cobertura
Elevadores: 1 social e 1 serviço
LAZER
Playground, Piscina com raia de 25m, Piscina infantil, Salão de festas, Fitness, Sauna com descanso e ducha, Solarium, Quadra de Tênis e Brinquedoteca.
Rubcrete
In this paper, the authors have discussed about the replacement of aggregates by discarded tyre rubber. This type of concrete is known as “Rubcrete”. It will cover the problems with the natural aggregate and also the reasons behind the use of rubber. The types of tyre rubber that are used, influence of size and content of rubber on concrete, effect of surface texture are discussed. Change in the properties of rubcrete over the conventional concrete, in hardened and fresh state such as slump, unit weight, air content, plastic shrinkage, mechanical strength been discussed. Paper covers the mechanisms behind the strength change, impact resistance, heat and sound insulation, freezing and thawing resistance of rubcrete. At the last, discussion on applications of rubcrete.
26678635 is-code-1343-for-pre-stressed-concrete
This document is the Indian Standard Code of Practice for Prestressed Concrete (First Revision). It provides guidelines for the structural use of prestressed concrete, covering both on-site work and precast prestressed concrete units. The code contains four sections dealing with general provisions, materials/workmanship/testing, general design requirements, and structural design using the limit state method. It incorporates changes from the previous version to unify prestressed and reinforced concrete provisions and introduce limit state design concepts.
Mini projects for_civil_engineering_(3)_(1) (1) (1)
This document lists 163 potential mini project topics for civil engineering students in their second, third, or fourth year. The topics cover a wide range of areas related to civil engineering, including air and water pollution monitoring, use of industrial waste materials in construction, soil testing and stabilization, traffic studies, structural analysis, and municipal infrastructure design. The mini projects are intended to provide hands-on learning opportunities for students in their undergraduate studies.
Section 400
The document discusses specifications for granular sub-base materials and construction. It describes four gradings for granular sub-base materials, with gradings I and II being well-graded and gradings III and IV being gap-graded to address drainage requirements. The specifications provide details on material quality tests, construction procedures for spreading, compacting, and finishing the sub-base, and requirements for quality control. Lime treatment of soil for improved sub-grade or sub-base is also covered, including allowable soil and lime materials and determining the appropriate quantity of lime to add.
Performance studies on reclaimed asphalt SMA 2014
The document discusses the use of recycled asphalt pavement (RAP) in stone matrix asphalt mixes, with RAP replacements of 10%, 30%, and 50% tested. Laboratory tests such as the Marshall test and indirect tensile strength test were conducted on specimens to evaluate the performance of mixes with different RAP contents. The results of the tests were analyzed to determine the optimum RAP percentage for stone matrix asphalt based on strength and economic considerations.
Practical Application of GI Technique Rev 0 HAKI pdf
Ground improvement techniques are used to strengthen weak soils and improve the performance of structures. The document discusses several techniques:
Consolidation techniques like prefabricated vertical drains and vacuum consolidation accelerate drainage and reduce voids in soil. Inclusion techniques like vibro stone columns and soil-cement mixing introduce elements to reinforce soil. Compaction techniques like vibro compaction and dynamic compaction densify soil. Selection of a technique depends on soil type, project needs, and costs. The document provides examples of applying techniques for liquefaction mitigation, infrastructure projects, and describes Bauer's vibro equipment and quality control methods.
Underwater Tunnels
1. Underwater tunnels are transport routes that are partly or wholly constructed under bodies of water, with different types including soft ground tunnels dug below the ocean bed, immersed tunnels made on the ocean floor, and floating submerged tunnels that float due to attached tethers.
2. Constructing underwater tunnels presents significant engineering challenges due to the tremendous water pressure from above and squeezing pressure from soft ground. Different tunnel construction methods are used depending on the material and conditions.
3. A proposed transatlantic underwater tunnel would connect North America and Europe, but presents massive challenges including the scales of resources, time, and extreme working conditions required that make completion effectively impossible with current technology.
precast driven pile 450x450-350x350
The document contains a table that lists the safe load carrying capacities of piles in kilonewtons (kN) based on their size. Piles with a size of 350x350mm have a vertical safe load of 400kN, pull-out/tension safe load of 100kN, and lateral/horizontal safe load of 50kN. Piles sized 450x450mm have vertical, pull-out/tension, and lateral/horizontal safe loads of 850kN, 250kN, and 70kN respectively. The document also includes drawings of pre-cast driven reinforced concrete piles, noting dimensions, reinforcement details, and testing requirements.
Using tyres wastes as aggregates in concrete to form rubcrete – mix for engin...
Abstract This paper presents the results, obtained after replacement of fine and coarse aggregates, in concrete mix, with tyre rubber. The tyre rubber, which has been used in the present study, is obtained after the mechanical trituration process of post – consumed tyres from trucks. Researchers have investigated, over the years, the use of recycled tyre rubber waste as a replacement for aggregate in concrete and its effectiveness. “Rubcrete-Mix” which would result from such replacement is found to have many engineering applications and holds promise in future. Rubcrete also possesses good mechanical properties and is considered to be one of the best and economical ways of recycling the used tyres. The present experimental study has the aim of arriving at the optimum quantity of the replacement material for the aggregates in concrete mixtures, for various engineering applications. For achieving a proper bond with the surrounding concrete paste, the recycled aggregates have been designed with respect to their size, shape and gradation. With the water – cement ratio being kept constant fine and coarse aggregate has been replaced with tyre rubber powder and chipped rubber and also cement has been replaced with silica fume. In preparing the concrete, Portland slag cement has been used along with super plasticizer less than 1% by weight of cement to achieve required workability of the resulting concrete. Furthermore, durability studies have been conducted and mixes have been designed for M30 grade concrete. Keywords: Concrete Mix, Mechanical Properties, Rubber Powder, Chipped Rubber, Silica fume.
A PROJECT REPORT WATER ABSORBING PAVEMENTS BY USING POROUS CONCRETE
This document is a project report on water absorbing pavements using porous concrete. It was submitted by Chintha Narayana Swamy to the Civil Engineering department of A.P. IIIT, R.K. Valley in partial fulfillment of the requirements for a Bachelor of Technology degree. The report discusses the materials and experimental work conducted to study the compressive strength and infiltration rate of porous concrete mixes. Cubic specimens were cast with different fine aggregate contents and tested after 7 and 28 days. The report aims to evaluate porous concrete as a sustainable pavement material for applications like recharging groundwater, managing stormwater runoff, and improving soil conditions for agriculture.
Crumb rubber modified bitumen
This document discusses crumb rubber modified bitumen (CRMB), which is a modified bitumen produced by mixing crumb rubber from shredded waste tires with conventional bitumen. The summary is as follows:
(1) CRMB was developed in the 1960s as a way to improve the performance of bituminous pavements and address issues like susceptibility to heat and water damage. (2) Crumb rubber is obtained from shredded truck and automobile tires and is mixed with bitumen using either a dry or wet process. (3) Compared to conventional bitumens, CRMB has benefits like lower temperature susceptibility, higher resistance to deformation, better adhesion between aggregates and binder, and improved performance under heavy traffic. However,
GGBS PPT
This document summarizes a study on the effects of Ground Granulated Blast Furnace Slag (GGBS) on the geotechnical properties of black cotton soil. The study involved testing black cotton soil mixed with varying percentages of GGBS. Tests showed that adding GGBS increased the maximum dry density and decreased the optimum moisture content of the soil. It also significantly reduced swelling, and increased the unconfined compressive strength and California bearing ratio of the soil. Using 30% GGBS improved the engineering properties of the black cotton soil to meet specifications. Therefore, GGBS can effectively stabilize black cotton soil.
Horizontal curve- IRC 38
The document discusses the geometric design of roads, specifically horizontal curves. It covers key elements of geometric design like alignment, profile, and cross-section. Horizontal curve design is an important part that influences safety and efficiency. Parameters like design speed, superelevation, extra widening, and minimum radius are discussed in detail according to Indian Road Congress standards. Methods for building superelevation and effecting widening on curves are also summarized.
Aashto design
This document provides an overview of pavement design methods and the 1993 AASHTO Guide for pavement design of both flexible and rigid pavements. It summarizes:
- The objectives and inputs considered in pavement design
- The empirical and mechanistic-empirical approaches used in the AASHTO Guide
- The key equations, parameters, and design process for both flexible and rigid pavement structures
It describes how the AASHTO Guide is based on predicting the decrease in serviceability over time under traffic loading using reliability concepts. The design process involves calculating the structural number for flexible pavements or slab thickness for rigid pavements based on traffic, materials properties, and reliability factors.
Concrete filled steel tubes
This document provides an overview of concrete filled steel tubes (CFT). It discusses the history and components of CFT, how steel tubes confine concrete and improve its properties. Comparisons are made between CFT and steel or reinforced concrete columns. Applications discussed include tall buildings, bridges and the Canton Tower. Advantages of CFT include increased strength and ductility over steel or concrete alone. Limitations relate to limited knowledge of CFT behavior and determining combined properties.
cfst columns
The document discusses concrete filled steel tube (CFST) columns under axial compressive loads. It summarizes that CFST columns have higher load capacity than hollow steel tubes due to the composite action between steel and concrete. Experimental tests were conducted on circular and square CFST columns with varying concrete grades and heights. The results showed that square CFST columns had higher load capacity than circular columns. Ultimate load also increased with higher concrete grade. Failure modes included local and overall buckling. CFST columns provide advantages like increased strength, reduced construction costs, and improved fire resistance compared to reinforced concrete columns.
TUBERIAS ADS
O documento descreve a linha de produtos de sistemas de saneamento da Tigre-ADS, incluindo tubos corrugados de dupla parede N-12 feitos de polietileno de alta densidade. Os tubos N-12 oferecem alta resistência, impermeabilidade, eficiência hidráulica e longa vida útil. A Tigre-ADS fornece soluções completas para sistemas de saneamento, drenagem e tratamento de água.
Rubber concrete
This document studied the effect of adding waste rubber to concrete. It conducted tests with concrete mixtures replacing the coarse aggregates with 5%, 10%, 15%, 20%, 25%, 30%, 50% and 100% rubber by volume. The results showed that as the percentage of rubber replacement increased, the compressive strength, slump, and density of the concrete decreased. However, adding rubber improves the concrete's elasticity and deformation properties while providing an environmentally friendly way to dispose of waste tires. The study concluded that rubberized concrete is most suitable for applications not requiring high strength, such as concrete pavements.
Rigid pavement
This document provides an overview of road and pavement systems. It discusses the history of road development from ancient footpaths and animal trails to modern roads incorporating asphalt and concrete. The key components of a pavement system including the embankment, subgrade, base, and pavement layers are described. Modern pavements are classified as either flexible (asphalt) or rigid (concrete), and their characteristics such as material properties, stress distribution, cracking behavior, and construction practices are compared.
fiber reinforced concrete
Ch. Gopi Chand presented on fiber reinforced concrete at Sri Venkateswara Engineering College. Fiber reinforced concrete was developed as a replacement for asbestos fibers in concrete. It involves adding short discrete fibers uniformly throughout a concrete mix. These fibers increase the tensile strength and cracking resistance of concrete. Fiber reinforced concrete has applications in thin sheets, pipes, precast elements, and transparent panels and partitions due to its improved strength and durability properties.
Sums on Rigid Pavement Design
This document provides examples of calculations related to rigid pavement design, including:
1) Calculating the spacing between contraction joints for plain and reinforced concrete slabs of varying thickness and reinforcement.
2) Computing the radius of relative stiffness for concrete slabs over subgrade, given slab properties and subgrade modulus.
3) Determining wheel load stresses, dowel bar sizing and spacing, equivalent resisting section radius, and contraction joint tensile stress.
4) Summarizing the process for designing a rigid pavement using Westergaard wheel load and wrapping stress equations at the slab edge.
soil nailing technique using gfrp
soil nailing technique is used for improvement of the ground.here it is illustrated with a case study.also the relative merits of gfrp and steel nails are compared.
PREPARE RATE ANALYSIS OF PAINTING WORK USING OBD , PLASTIC EMULSION OIL PAINT...
This document provides details of a micro project analyzing rates for preparing an 8 km WBM road. It includes an introduction, factors affecting rate analysis, elements of rate analysis, why it is required, an analysis of rates example, and references. The project was completed by 3 students and certified by their professor for their Civil Engineering program. Key points covered include labor costs, material costs, transportation costs, contractor overhead and profit, and how rate analysis is used for tendering, project planning, and disputes.
Indian standard: IS808 DIMENSIONS FOR HOT ROLLED STEEL
This document is the Indian Standard IS 808 from 1989 on dimensions for hot rolled steel beam, column, channel and angle sections. It provides the classification, designation, dimensions, mass, tolerances and sectional properties of different structural sections. The standard covers nominal dimensions and properties of beams, columns, channels and equal/unequal leg angles. It specifies dimensions for Indian Standard junior, light, medium and heavy sections for beams, columns and channels in tables.
Waste material concrete ppt
This document discusses types of waste materials that can be used to produce waste material based concrete, including organic waste like rice husk, inorganic waste like broken concrete and glass, and industrial wastes like blast furnace slag, coal ash, and red mud. Rice husk can be used to produce lightweight concrete, while broken concrete and glass can produce concrete of sufficient strength. Blast furnace slag and coal ash can partially replace cement and improve properties like chemical resistance. Silica fume can significantly increase strength and allow high water-cement ratios. Using these wastes can reduce costs and environmental impacts of concrete production.
Siteinvestigation
This document provides an overview of site investigation procedures for determining subsurface soil conditions. It discusses the purposes of site investigations, which include selecting foundation types, evaluating load capacity, estimating settlements, and determining potential foundation problems. The exploration program aims to determine soil stratification and engineering properties through borings, samples, and field tests. Standard procedures are outlined for boring depth and spacing, soil and rock sampling methods, groundwater level determination, and field strength tests like SPT, CPT, and PLT.
Polymer Modified Binders presentation for CalAPA Tech meeting
Polymer Modified Binders presentation for CalAPA Tech meetingCalifornia Asphalt Pavement Association
This document discusses polymer modified asphalt binders. It provides background on Kraton Corporation, a leading producer of styrenic block copolymers used in polymer modification. It then covers topics including asphalt binders, polymer modification and its effects on mechanical properties, and performance benefits including increased pavement life. Case studies are presented demonstrating longer lasting pavements with polymer modified asphalt in various locations.Viver Parque das Árvores
O Projeto Viver Parque das Árvores é um empreendimento residencial localizado na Zona Sul de Porto Alegre com 423 unidades, oferecendo lazer completo e localização estratégica próxima a comércios e serviços. O projeto arquitetônico prioriza a iluminação e ventilação naturais com diferentes tipologias de unidades de 43 a 53m2 distribuídas em 9 torres.
Empreendimentos Elias Victor Nigri
A Construtora Elias Victor Nigri atua há mais de 30 anos no mercado imobiliário de São Paulo, construindo empreendimentos nobres e valorizados. A empresa se destaca pela escolha criteriosa de terrenos, projetos de qualidade, uso de materiais premium e atendimento personalizado. Suas obras incluem condomínios de alto padrão com áreas comuns sofisticadas em bairros desejados como Higienópolis.
Mais conteúdo relacionado
Mais procurados
precast driven pile 450x450-350x350
The document contains a table that lists the safe load carrying capacities of piles in kilonewtons (kN) based on their size. Piles with a size of 350x350mm have a vertical safe load of 400kN, pull-out/tension safe load of 100kN, and lateral/horizontal safe load of 50kN. Piles sized 450x450mm have vertical, pull-out/tension, and lateral/horizontal safe loads of 850kN, 250kN, and 70kN respectively. The document also includes drawings of pre-cast driven reinforced concrete piles, noting dimensions, reinforcement details, and testing requirements.
Using tyres wastes as aggregates in concrete to form rubcrete – mix for engin...
Abstract This paper presents the results, obtained after replacement of fine and coarse aggregates, in concrete mix, with tyre rubber. The tyre rubber, which has been used in the present study, is obtained after the mechanical trituration process of post – consumed tyres from trucks. Researchers have investigated, over the years, the use of recycled tyre rubber waste as a replacement for aggregate in concrete and its effectiveness. “Rubcrete-Mix” which would result from such replacement is found to have many engineering applications and holds promise in future. Rubcrete also possesses good mechanical properties and is considered to be one of the best and economical ways of recycling the used tyres. The present experimental study has the aim of arriving at the optimum quantity of the replacement material for the aggregates in concrete mixtures, for various engineering applications. For achieving a proper bond with the surrounding concrete paste, the recycled aggregates have been designed with respect to their size, shape and gradation. With the water – cement ratio being kept constant fine and coarse aggregate has been replaced with tyre rubber powder and chipped rubber and also cement has been replaced with silica fume. In preparing the concrete, Portland slag cement has been used along with super plasticizer less than 1% by weight of cement to achieve required workability of the resulting concrete. Furthermore, durability studies have been conducted and mixes have been designed for M30 grade concrete. Keywords: Concrete Mix, Mechanical Properties, Rubber Powder, Chipped Rubber, Silica fume.
A PROJECT REPORT WATER ABSORBING PAVEMENTS BY USING POROUS CONCRETE
This document is a project report on water absorbing pavements using porous concrete. It was submitted by Chintha Narayana Swamy to the Civil Engineering department of A.P. IIIT, R.K. Valley in partial fulfillment of the requirements for a Bachelor of Technology degree. The report discusses the materials and experimental work conducted to study the compressive strength and infiltration rate of porous concrete mixes. Cubic specimens were cast with different fine aggregate contents and tested after 7 and 28 days. The report aims to evaluate porous concrete as a sustainable pavement material for applications like recharging groundwater, managing stormwater runoff, and improving soil conditions for agriculture.
Crumb rubber modified bitumen
This document discusses crumb rubber modified bitumen (CRMB), which is a modified bitumen produced by mixing crumb rubber from shredded waste tires with conventional bitumen. The summary is as follows:
(1) CRMB was developed in the 1960s as a way to improve the performance of bituminous pavements and address issues like susceptibility to heat and water damage. (2) Crumb rubber is obtained from shredded truck and automobile tires and is mixed with bitumen using either a dry or wet process. (3) Compared to conventional bitumens, CRMB has benefits like lower temperature susceptibility, higher resistance to deformation, better adhesion between aggregates and binder, and improved performance under heavy traffic. However,
GGBS PPT
This document summarizes a study on the effects of Ground Granulated Blast Furnace Slag (GGBS) on the geotechnical properties of black cotton soil. The study involved testing black cotton soil mixed with varying percentages of GGBS. Tests showed that adding GGBS increased the maximum dry density and decreased the optimum moisture content of the soil. It also significantly reduced swelling, and increased the unconfined compressive strength and California bearing ratio of the soil. Using 30% GGBS improved the engineering properties of the black cotton soil to meet specifications. Therefore, GGBS can effectively stabilize black cotton soil.
Horizontal curve- IRC 38
The document discusses the geometric design of roads, specifically horizontal curves. It covers key elements of geometric design like alignment, profile, and cross-section. Horizontal curve design is an important part that influences safety and efficiency. Parameters like design speed, superelevation, extra widening, and minimum radius are discussed in detail according to Indian Road Congress standards. Methods for building superelevation and effecting widening on curves are also summarized.
Aashto design
This document provides an overview of pavement design methods and the 1993 AASHTO Guide for pavement design of both flexible and rigid pavements. It summarizes:
- The objectives and inputs considered in pavement design
- The empirical and mechanistic-empirical approaches used in the AASHTO Guide
- The key equations, parameters, and design process for both flexible and rigid pavement structures
It describes how the AASHTO Guide is based on predicting the decrease in serviceability over time under traffic loading using reliability concepts. The design process involves calculating the structural number for flexible pavements or slab thickness for rigid pavements based on traffic, materials properties, and reliability factors.
Concrete filled steel tubes
This document provides an overview of concrete filled steel tubes (CFT). It discusses the history and components of CFT, how steel tubes confine concrete and improve its properties. Comparisons are made between CFT and steel or reinforced concrete columns. Applications discussed include tall buildings, bridges and the Canton Tower. Advantages of CFT include increased strength and ductility over steel or concrete alone. Limitations relate to limited knowledge of CFT behavior and determining combined properties.
cfst columns
The document discusses concrete filled steel tube (CFST) columns under axial compressive loads. It summarizes that CFST columns have higher load capacity than hollow steel tubes due to the composite action between steel and concrete. Experimental tests were conducted on circular and square CFST columns with varying concrete grades and heights. The results showed that square CFST columns had higher load capacity than circular columns. Ultimate load also increased with higher concrete grade. Failure modes included local and overall buckling. CFST columns provide advantages like increased strength, reduced construction costs, and improved fire resistance compared to reinforced concrete columns.
TUBERIAS ADS
O documento descreve a linha de produtos de sistemas de saneamento da Tigre-ADS, incluindo tubos corrugados de dupla parede N-12 feitos de polietileno de alta densidade. Os tubos N-12 oferecem alta resistência, impermeabilidade, eficiência hidráulica e longa vida útil. A Tigre-ADS fornece soluções completas para sistemas de saneamento, drenagem e tratamento de água.
Rubber concrete
This document studied the effect of adding waste rubber to concrete. It conducted tests with concrete mixtures replacing the coarse aggregates with 5%, 10%, 15%, 20%, 25%, 30%, 50% and 100% rubber by volume. The results showed that as the percentage of rubber replacement increased, the compressive strength, slump, and density of the concrete decreased. However, adding rubber improves the concrete's elasticity and deformation properties while providing an environmentally friendly way to dispose of waste tires. The study concluded that rubberized concrete is most suitable for applications not requiring high strength, such as concrete pavements.
Rigid pavement
This document provides an overview of road and pavement systems. It discusses the history of road development from ancient footpaths and animal trails to modern roads incorporating asphalt and concrete. The key components of a pavement system including the embankment, subgrade, base, and pavement layers are described. Modern pavements are classified as either flexible (asphalt) or rigid (concrete), and their characteristics such as material properties, stress distribution, cracking behavior, and construction practices are compared.
fiber reinforced concrete
Ch. Gopi Chand presented on fiber reinforced concrete at Sri Venkateswara Engineering College. Fiber reinforced concrete was developed as a replacement for asbestos fibers in concrete. It involves adding short discrete fibers uniformly throughout a concrete mix. These fibers increase the tensile strength and cracking resistance of concrete. Fiber reinforced concrete has applications in thin sheets, pipes, precast elements, and transparent panels and partitions due to its improved strength and durability properties.
Sums on Rigid Pavement Design
This document provides examples of calculations related to rigid pavement design, including:
1) Calculating the spacing between contraction joints for plain and reinforced concrete slabs of varying thickness and reinforcement.
2) Computing the radius of relative stiffness for concrete slabs over subgrade, given slab properties and subgrade modulus.
3) Determining wheel load stresses, dowel bar sizing and spacing, equivalent resisting section radius, and contraction joint tensile stress.
4) Summarizing the process for designing a rigid pavement using Westergaard wheel load and wrapping stress equations at the slab edge.
soil nailing technique using gfrp
soil nailing technique is used for improvement of the ground.here it is illustrated with a case study.also the relative merits of gfrp and steel nails are compared.
PREPARE RATE ANALYSIS OF PAINTING WORK USING OBD , PLASTIC EMULSION OIL PAINT...
This document provides details of a micro project analyzing rates for preparing an 8 km WBM road. It includes an introduction, factors affecting rate analysis, elements of rate analysis, why it is required, an analysis of rates example, and references. The project was completed by 3 students and certified by their professor for their Civil Engineering program. Key points covered include labor costs, material costs, transportation costs, contractor overhead and profit, and how rate analysis is used for tendering, project planning, and disputes.
Indian standard: IS808 DIMENSIONS FOR HOT ROLLED STEEL
This document is the Indian Standard IS 808 from 1989 on dimensions for hot rolled steel beam, column, channel and angle sections. It provides the classification, designation, dimensions, mass, tolerances and sectional properties of different structural sections. The standard covers nominal dimensions and properties of beams, columns, channels and equal/unequal leg angles. It specifies dimensions for Indian Standard junior, light, medium and heavy sections for beams, columns and channels in tables.
Waste material concrete ppt
This document discusses types of waste materials that can be used to produce waste material based concrete, including organic waste like rice husk, inorganic waste like broken concrete and glass, and industrial wastes like blast furnace slag, coal ash, and red mud. Rice husk can be used to produce lightweight concrete, while broken concrete and glass can produce concrete of sufficient strength. Blast furnace slag and coal ash can partially replace cement and improve properties like chemical resistance. Silica fume can significantly increase strength and allow high water-cement ratios. Using these wastes can reduce costs and environmental impacts of concrete production.
Siteinvestigation
This document provides an overview of site investigation procedures for determining subsurface soil conditions. It discusses the purposes of site investigations, which include selecting foundation types, evaluating load capacity, estimating settlements, and determining potential foundation problems. The exploration program aims to determine soil stratification and engineering properties through borings, samples, and field tests. Standard procedures are outlined for boring depth and spacing, soil and rock sampling methods, groundwater level determination, and field strength tests like SPT, CPT, and PLT.
Polymer Modified Binders presentation for CalAPA Tech meeting
Polymer Modified Binders presentation for CalAPA Tech meetingCalifornia Asphalt Pavement Association
This document discusses polymer modified asphalt binders. It provides background on Kraton Corporation, a leading producer of styrenic block copolymers used in polymer modification. It then covers topics including asphalt binders, polymer modification and its effects on mechanical properties, and performance benefits including increased pavement life. Case studies are presented demonstrating longer lasting pavements with polymer modified asphalt in various locations.Mais procurados (20)
Using tyres wastes as aggregates in concrete to form rubcrete – mix for engin...
Using tyres wastes as aggregates in concrete to form rubcrete – mix for engin...
A PROJECT REPORT WATER ABSORBING PAVEMENTS BY USING POROUS CONCRETE
A PROJECT REPORT WATER ABSORBING PAVEMENTS BY USING POROUS CONCRETE
PREPARE RATE ANALYSIS OF PAINTING WORK USING OBD , PLASTIC EMULSION OIL PAINT...
PREPARE RATE ANALYSIS OF PAINTING WORK USING OBD , PLASTIC EMULSION OIL PAINT...
Indian standard: IS808 DIMENSIONS FOR HOT ROLLED STEEL
Indian standard: IS808 DIMENSIONS FOR HOT ROLLED STEEL
Polymer Modified Binders presentation for CalAPA Tech meeting
Polymer Modified Binders presentation for CalAPA Tech meeting
Semelhante a Alpha Park
Viver Parque das Árvores
O Projeto Viver Parque das Árvores é um empreendimento residencial localizado na Zona Sul de Porto Alegre com 423 unidades, oferecendo lazer completo e localização estratégica próxima a comércios e serviços. O projeto arquitetônico prioriza a iluminação e ventilação naturais com diferentes tipologias de unidades de 43 a 53m2 distribuídas em 9 torres.
Empreendimentos Elias Victor Nigri
A Construtora Elias Victor Nigri atua há mais de 30 anos no mercado imobiliário de São Paulo, construindo empreendimentos nobres e valorizados. A empresa se destaca pela escolha criteriosa de terrenos, projetos de qualidade, uso de materiais premium e atendimento personalizado. Suas obras incluem condomínios de alto padrão com áreas comuns sofisticadas em bairros desejados como Higienópolis.
Apresentação Cheverny
O documento descreve um empreendimento residencial planejado com 768 unidades, áreas de lazer como piscinas e quadra, e localização próxima a obras como parque e shopping. Apresenta detalhes técnicos dos apartamentos de 2 e 3 quartos, plantas baixas e fachadas, além de plano de lançamento e marketing da segunda fase.
Zéfiro Curitiba CENTRO Lançamento Studios 1 e 2 Quartos Vendas (41) 9609-7986...
O documento descreve um residencial de 66 unidades localizado no centro de Curitiba. O residencial terá 16 pavimentos com 5 apartamentos por andar, além de 2 subsolos. Serão oferecidos estúdios de 30m2, apartamentos de 1 e 2 quartos e 2 duplex de 103m2. A previsão de conclusão é dezembro de 2017.
Helbor Trend - Vila da Serra - www.ronaldocorretor.com.br
www.ronaldocorretor.com.br - Verifique opções de revenda neste empreendimento
Apartamentos de 2 e 3 quartos no Vila da Serra. Linda vista definitiva para as montanhas. 31 9994-2839
QUER TRABALHAR COMO CORRETOR DE IMÓVEIS NA EQUIPE DO RONALDO ROSCOE EM BH? Envie seu currículo para ronaldo.roscoe@gmail.com
Helbor 110317132804-phpapp02
O documento descreve os resultados comerciais e residenciais de vários empreendimentos da Helbor no Brasil, como unidades vendidas rapidamente. Também lista prêmios recebidos pela Helbor e apresenta detalhes sobre o novo empreendimento Helbor Trend Vila da Serra, como localização, ficha técnica, fachadas e plantas.
Breeze Jd. Goias
Bons ventos trazem Breeze LifeStyle para você. Com uma fachada contemporânea formada por texturas e molduras que trazem ao empreendimento modernidade marcante. Folhas de vidro e traços que destacam a fachada compõem a imponência do Residencial. Localizado no Jardim Goiás, você sente no ar um sopro de qualidade de vida, conforto e modernidade. Breeze Lifestyle é o que te faz viver pertinho do recanto de pureza que é o Parque Flamboyant. São apartamentos de 125 m² com 4 Quartos.
Perfeito para você - case de comunicação integrada [marketing imobiliário]
Este documento descreve uma campanha de comunicação integrada realizada pelo consórcio ARC/Agra para o mercado imobiliário em Salvador entre outubro e dezembro de 2008. A campanha "Perfeito para Você" promoveu sete empreendimentos imobiliários com mix diversificado de produtos visando diferentes perfis de compradores. A estratégia integrou diferentes mídias como site, impressos, TV, marketing direto e ações promocionais para gerar contatos e manter as vendas em meio à crise econôm
Semelhante a Alpha Park (8)
Zéfiro Curitiba CENTRO Lançamento Studios 1 e 2 Quartos Vendas (41) 9609-7986...
Zéfiro Curitiba CENTRO Lançamento Studios 1 e 2 Quartos Vendas (41) 9609-7986...
Helbor Trend - Vila da Serra - www.ronaldocorretor.com.br
Helbor Trend - Vila da Serra - www.ronaldocorretor.com.br
Perfeito para você - case de comunicação integrada [marketing imobiliário]
Perfeito para você - case de comunicação integrada [marketing imobiliário]
Mais de Brasil Brokers BA
Vela Branca Boulevard pdf
O documento descreve um empreendimento imobiliário com 88 apartamentos de 2 a 4 quartos localizado na Pituba, Salvador. O empreendimento oferece áreas comuns como playground, salão de festas, academia e brinquedoteca. Os apartamentos possuem entre 65 a 67 m2 e são descritos com plantas baixas e especificações técnicas.
Atlântico Ville
O documento descreve um empreendimento imobiliário com 104 apartamentos localizado em uma área privilegiada perto da praia. O empreendimento oferece apartamentos de 2 e 3 quartos, ampla infraestrutura de lazer, e é da Construtora Sol, com 40 anos de experiência.
Prestige Garcia
El documento presenta los planos de un proyecto inmobiliario que incluye varias áreas comunes como una piscina, cancha de fútbol, salón de fiestas y gimnasio. También muestra cuatro tipos de unidades residenciales de entre 63 y 83 metros cuadrados con de 1 a 3 habitaciones. Cada sección proporciona información sobre las ventas.
Supremo Family Club
O documento apresenta três empresas do setor imobiliário brasileiro: PETRAM, com 20 anos de atuação na Bahia, Rio de Janeiro e São Paulo; HABITACON, construtora paulista de 20 anos conhecida por sua inovação; e TECNISA, uma das maiores do setor com 20 anos e em processo de expansão regional após lançar ações no Novo Mercado.
Bosque Patamares
O condomínio Bosque Patamares possui 180 apartamentos em duas torres de 15 pavimentos, com 364 vagas de garagem. Inclui piscinas, quadra esportiva, salão de festas, brinquedoteca e diversas outras instalações de lazer e conveniência.
Atlântico Porto
O empreendimento Viva Mais, Curta Mais oferece unidades modernas com diversas comodidades como piscina, spa, academia e salão de festas em localização privilegiada na orla de Salvador. O projeto une tradição e inovação da Construtora Pablo com o conceito de home stay para proporcionar conforto e segurança aos moradores.
Terrazo Caminho das Árvores
As vendas da empresa aumentaram 10% no último trimestre, principalmente devido ao lançamento de um novo produto. Apesar disso, as margens de lucro diminuíram ligeiramente devido ao aumento dos custos de matérias-primas. A equipe de vendas continua focada em aumentar as vendas e margens no próximo trimestre.
Mar Azul Boulevard
Boulevard é um lugar com muitas atrações para entretenimento e diversão, proporcionando uma vida com variedade de opções de lazer e atividades em um ambiente agradável.
DUO
O documento descreve as características e amenidades do empreendimento residencial Aquarius em três frases:
1) O Aquarius é um bairro sofisticado e exclusivo localizado próximo a diversas facilidades como restaurantes, escolas e shopping centers.
2) O Aquarius oferece uma praça central de 7 mil metros quadrados para lazer das famílias.
3) O lançamento DUO Residence no Aquarius apresenta apartamentos de 272 metros quadrados com 4 suítes de alto padrão.
Duo
O documento descreve um empreendimento imobiliário de luxo chamado DUO Residence localizado no bairro Aquarius em Salvador, Bahia. O projeto consiste em uma torre com 30 apartamentos de alto padrão, cada um com 271m2 e 4 suítes. O condomínio oferece diversas áreas de lazer e comodidades.
Capri
O documento descreve o empreendimento residencial Aquarius em Salvador, Bahia. O empreendimento oferece um estilo de vida sofisticado e exclusivo com diversas opções de lazer e conveniência, como uma grande praça, shopping, hospital e escolas próximos. O condomínio Capri, localizado no Aquarius, é destacado, com suas 4 suítes de 222m2 projetadas pelo arquiteto Sidney Quintela com vista para a praça e oferecendo luxo, requinte e lazer na piscina, spa e outros espaços.
Seasons Residence
O documento descreve o empreendimento residencial Seasons Residence localizado no bairro de Aquarius em Salvador, Bahia. O projeto oferece apartamentos de 3 e 4 suítes com áreas de lazer como piscina, quadra, spa e salão de festas. O Seasons Residence tem como objetivo proporcionar qualidade de vida e bem-estar aos moradores.
Solar Morro Ipiranga
A empresa de tecnologia anunciou um novo smartphone com câmera aprimorada, maior tela e bateria de longa duração. O dispositivo também possui processador mais rápido e armazenamento expansível. O novo modelo será lançado em outubro por um preço inicial de US$799.
Volare Imbuí
O documento descreve um empreendimento imobiliário no bairro do Imbuí em Salvador composto por duas torres com apartamentos de 2 e 3 quartos. O empreendimento contará com diversas áreas comuns e lazer e previsão de entrega para fevereiro de 2014.
Floratta Alamedas Residenciais
1) O documento apresenta o projeto de implantação de um condomínio residencial chamado Vilas do Atlântico localizado na Praia de Buraquinho.
2) O condomínio contará com diversas estruturas de lazer e conveniência como piscinas, quadra, salão de festas, academia e brinquedoteca.
3) Também apresenta perspectivas ilustradas dos apartamentos, estruturas do clube e da implantação geral do empreendimento.
Art Residence
Este condomínio oferece piscina com raia e infantil, quadra de esportes, salões de festas adulto e infantil, portaria de acesso e caminho arborizado.
Pátio Arvoredo
As vendas estão aumentando. O relatório mostra que as vendas estão crescendo consistentemente a cada mês. As estratégias de marketing estão funcionando bem para impulsionar as vendas.
Mar de Itapuã
Uma excelente opção de moradia, um condomínio prático em Itapuã, comercializado pela Brasil Brokers Triumphe Imóveis.
Le Duc
O documento descreve um projeto de horto florestal com áreas recreativas e de lazer, incluindo: uma guarita de acesso, estacionamento, parque infantil, salão de festas, piscinas adulta e infantil, espaço gourmet e opções de plantas residenciais com suítes.
Mais de Brasil Brokers BA (20)
Alpha Park
- 2. Realização • A parceria da Helbor com a EBM foi iniciada em 1998. • São Paulo, Mogi das Cruzes, Goiânia, Uberlândia, Brasília e Salvador • 24 empreendimentos (2.942 unidades, sendo 1.668 já concluídas e 1274 em construção). •Prêmio Máster Imobiliário: 2005 Helbor Home Flex Premium e 2006 Aton Business Style
- 4. LOCALIZAÇÃO : Avenida Alpha, Lote 02 quadra C4,Loteamento Alphaville – Salvador
- 5. ALPHA PARK – FICHA TÉCNICA FICHA TÉCNICA Área total do terreno: 3.813,91 m² Projeto de Arquitetura: Isabel Jacomo Projeto de Paisagismo: Benedito Abud Apartamento Decorado: Cristiane Pepe e Edilson Campelo Data de Lançamento: Outubro 2007 Previsão de entrega: Março de 2010 Numero de torres: 2 Numero de unidades por andar: 6 por bloco Numero de pavimentos: 3 subsolos, térreo, 13 pavimentos tipo, 14 cobertura Numero total de unidades: 168 (156 tipos e 12 coberturas) Area Privativa Tipo: 78m2 nas pontas e 64 apto no centro
- 7. IMPLANTAÇÃO
- 10. PLAY
- 11. CHURRASQUEIRA
- 12. CINEMA
- 13. SALÃO DE FESTAS
- 14. SALÃO DE FESTAS INFANTIL
- 15. FITTNES
- 16. SPA
- 17. LOOBY
- 18. IMPLANTAÇÃO
- 19. PLANTAS
- 22. SUGESTÃO DE PERSONALIZAÇÃO - DECORADO Apartamento Decorado Cristiane PePe e Edilson Campelo
- 23. COBERTURA DUPLEX - LATERAL
- 24. COBERTURA DUPLEX - CENTRO