Projeto de pesquisa em VoIP Peering:Interconexão de redes VoIP utilizandomapeamento eletrônico de númerosCPqD – UFU - Algar
A Mudança
CPqD
Do Projeto para a AcademiaDocenteDiscentesRecursos
• Construção da Proposta• Motivação e Justificativas• Trabalhos correlatos• Pesquisa• Desenvolvimento – Aplicações• Artigo...
Sistemas Elétricos de PotênciaTelecomunicaçõesEngenharia da ComputaçãoControle e AutomaçãoEngenharia Biomédica
Programa de Pós Eng. Elétrica• 200 discentes• 2012: 48 mestres, 13 doutores• 53 periódicos• Mais de 200 publicações em Con...
Projeto Intervoip - ObjetivosDesenvolver um sistema utilizando a tecnologia DNS-ENUM visando:- Promover a interconexão mul...
Projeto de pesquisa em VoIP Peering: Interconexão de redes VoIP utilizando mapeamento eletrônico de números - I Workshop C...
Próximos SlideShares
Carregando em…5
×

Projeto de pesquisa em VoIP Peering: Interconexão de redes VoIP utilizando mapeamento eletrônico de números - I Workshop CPqD de Inovação Tecnológica em VoIP Peering

595 visualizações

Publicada em

Publicada em: Tecnologia
0 comentários
0 gostaram
Estatísticas
Notas
  • Seja o primeiro a comentar

  • Seja a primeira pessoa a gostar disto

Sem downloads
Visualizações
Visualizações totais
595
No SlideShare
0
A partir de incorporações
0
Número de incorporações
9
Ações
Compartilhamentos
0
Downloads
2
Comentários
0
Gostaram
0
Incorporações 0
Nenhuma incorporação

Nenhuma nota no slide
  • Custom animation effects: tipping scales(Difficult)To reproduce the shape effects on this slide, do the following:On the Home tab, in theSlides group, click Layout, and then click Blank.On the Home tab, in the Drawing group, click Shapes, and under BasicShapes select Oval (first row, second option from the left). Press and hold SHIFT and on the slide, drag to draw a circle.Select the oval. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter2.16”.In the ShapeWidth box, enter2.16”.With the oval still selected, on the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane, do the following:Select Solidfill.Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 25% (fourth row, first option from the left).Also in the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane, click Noline.Also in the FormatShape dialog box, click 3-DFormat in the left pane, and in the 3-DFormat pane, do the following:Under Bevel, in the Top list, under Bevel, select Angle (second row, first option from the left).Next to the Top list, in the Width box, enter 5.5 pt, and in the Height box, enter 9.5 pt. Under Depth, in the Depth box, enter 3.5 pt.Also in the FormatShape dialog box, click 3-DRotation in the left pane, and in the 3-DRotation pane, under Rotation, do the following:In the X box, enter 297.8°. In the Y box, enter 298.9°. In the Z box, enter 65.2°.Also in the Format Shape dialog box, click Shadow in the left pane, and in the Shadow pane, do the following:In the Transparency box, enter 60%.In the Size box, enter 105%. In the Blur box, enter 15 pt. In the Angle box, enter 120°. In the Distance box, enter 9 pt.Drag the circle to the bottom of the slide. On the Home tab, in the Drawing group, click Arrange, point to Align and then select AlignCenter. On the Home tab, in the Drawing group, click Shapes, and under Rectangles select RoundedRectangle (second option from the left). On the slide, drag to draw a rounded rectangle.Drag the yellow diamond adjustment handle to the right to create a rounded top.Select the rectangle. Under DrawingTools, on the Format tab, in the Size group, in the ShapeHeight box, enter 4.2”, and in the ShapeWidth box, enter 0.18”.On the Home tab, in the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, in the left pane, click Fill, and in the Fill pane, do the following:Click Solidfill. In the Color list, under ThemeColors, select White, Background 1, Darker 15% (third row, first option from the left).Also in the FormatShape dialog box, in the left pane, click LineColor, and in the LineColor pane, click Noline.Also in the FormatShape dialog box, in the left pane, click 3-DFormat, and in the 3-DFormat pane, do the following:Under Bevel, in the Top list, under Bevel, select Circle (first row, first option from the left). Next to the Top list, in the Width box, enter 10 pt,and in the Height box, enter 10 pt. Position the bottom of rectangle so that it slightly overlaps the oval.Select the rounded rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select AlignCenter. With the rounded rectangle still selected, on the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.Select the second rounded rectangle. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter4.35”.In the ShapeWidth box, enter0.13”.With the second rounded rectangle still selected, on the Home tab, in the Drawing group, click Arrange, point to Rotate, and select RotateLeft 90°. Position the second (horizontal) round rectangle so that it slightly overlaps the top of the first, vertical round rectangle.Select the second (horizontal) round rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select AlignCenter. Select the first (vertical) round rectangle. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.Select the third (vertical) rounded rectangle. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter0.32”.In the ShapeWidth box, enter0.32”.Position the third, smaller round rectangle at the intersection at the top of the first (vertical) and second (horizontal) round rectangles.Select the third, smaller round rectangle. On the Home tab, in the Drawing group, click Arrange, point to Align, and select AlignCenter. Press and hold SHIFT and select the second (horizontal) and third (smaller) round rectangles. On the Home tab, in the Drawing group, click Arrange, and select Group.Select the oval. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate.Select the second oval. Under DrawingTools, on the Format tab, in theSize group, do the following:In the ShapeHeight box, enter1.93”.In the ShapeWidth box, enter1.93”.On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, and in the Fill pane do the following:Click Solidfill.Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 15% (third row, first option from the left).Also in the FormatShape dialog box, click Shadow in the left pane, and in the Shadow pane, in the Presets list, select NoShadow. Also in the FormatShape dialog box, click 3-DFormat in the left pane, and in the 3-DFormat pane, do the following:Under Bevel, in the Top list, under Bevel, select Slope (second row, fourth option from the left).Next to the Top list, in the Width box, enter 5.5 pt,and in the Height box, enter 5 pt. Under Bevel, in the Bottom list, under Bevel, select Angle (second row, first option from the left). Next to the Bottom list, in the Width box, enter 11 pt,and in the Height box, enter 5 pt.Also in the FormatShape dialog box, click 3-DRotation in the left pane, and in the 3-DRotation pane, under Rotation, do the following:In the X box, enter 287.8°.In the Y box, enter 297.1°.In the Z box, enter 74.1°.Position this oval (or dish) on the left side of the slide, approximately 2.5 inches below the horizontal round rectangleOn the Home tab, in the Drawing group, click Shapes, and under Lines select Line (first option from the left). On the slide, drag to draw a line from the left edge of the horizontal rectangle to the bottom left edge of the dish.Select the line. On the Home tab, in bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane do the following:Click Solidline. Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 25% (fourth row, first option from the left).Also in the FormatShape dialog box, click LineStyle in the left pane, and in the LineStyle pane do the following:In the Width box, enter 3.75 pt. In the Dashtype list, select Round Dot (second option). In the Captype list, select Round. In the Jointype list, select Round. Select the line. On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate. Select the second line. On the Home tab, in the Drawing group, click Arrange, point to Rotate, and select FlipHorizontal. Position the duplicate line so the top point is at the same position as the top point on the first line. Position the endpoint on the right edge of the dish.On the Home tab, in the Drawing group, click Arrange, and then select Send to Back. Press and hold CTRL and select both lines and the dish. On the Home tab, in the Drawing group, click Arrange, and select Group. Select the group (the two dotted lines and the dish). On the Home tab, in the Clipboard group, click the arrow below Paste and select Duplicate. Position the second group on the right side of the slide.Press and hold CTRL and select both left and right groups. On the Home tab, in the Drawing group, click Arrange, and then do the following:Point to Align, and select AlignSelectedObjects.Point to Align, and select AlignTop.Select Send to Back.To reproduce the animation effects on this slide, do the following:Select top horizontal bar group. On the Animations tab, in the Animations group, click CustomAnimations.In the CustomAnimation task pane, click AddEffect, point to Emphasis and select MoreEffects. In the AddEmphasisEffect dialog box, under Basic, select Spin, and then click OK.In the CustomAnimation task pane, select the animation effect, and then under Modify: Spin,do the following:In the Start list, select WithPrevious.In the Amount list, in the Custom box, enter 10, and then press ENTER. Also in the Amount list, select Clockwise.In the Speed list, select Fast.Click OK.Select the left dish group. In the CustomAnimation task pane, click AddEffect, point to MotionPaths, and select Up.In the CustomAnimation task pane, select the Up motion path, and then under Modify: Up,do the following:In the Start list, select WithPrevious. In the Speed list, select Fast. Click OK.In the CustomAnimation task pane, select the Up motion path effect. On the slide, press and hold the SHIFT key and drag the endpoint (red arrow) down to shorten the motion path to approximately .33” in length. (Note: If needed, zoom in to see the objects. On the View tab, in the Zoom group, click Zoom, and in the Zoom dialog box, in the Percent box enter 200%. After editing, on the View tab, in the Zoom group, click Fit to Window to return to the slide to its original size.)In the CustomAnimation task pane, click the arrow to the right of the Up motion path and select EffectOptions. In the Up dialog box, on the Effect tab, under Settings, clear both SmoothStart and SmoothEnd and then click OK.Select right dish group. In the CustomAnimation task pane, click the arrow next to AddEffect, point to MotionPaths, and select Down.In the CustomAnimation task pane, select the Down motion path, and then under Modify: Down, do the following:In the Start list, select WithPrevious. In the Speed list, select Fast.Click OK. In the CustomAnimation task pane, select the Down motion path. On the slide, press and hold SHIFT and drag the endpoint (red arrow) up to shorten the path to approximately .33” in length.In the CustomAnimation task pane, click the arrow next to the Down motion path and select EffectOptions. In the Down dialog box, on the Effect tab, under Settings, clear SmoothStart, clear SmoothEnd, and then click OK.Select the top horizontal bar group. In the CustomAnimation task pane, click the arrow next to AddEffect, point to Emphasis, and select MoreEffects. In the AddEmphasisEffect dialog box, under Basic, select Spin,and then click OK.In the CustomAnimation task pane, select the second Spin animation effect, and then under Modify: Spin do the following:In the Start list, select OnClick. In the Amount list, in the Custom box, enter 20°, and then press ENTER. Also in the Amount list, select Counterclockwise. In the Speed list, select Fast. Click OK.Select the left dish group. In the CustomAnimation task pane, click AddEffect, point to MotionPaths, and select Down. In the CustomAnimation task pane, select the Down motion path, and then under Modify: Down, do the following:In the Start list, select WithPrevious. In the Speed list, select Fast. Click OK.In the CustomAnimation task pane, select the Down motion path for the right dish. On the slide, press and hold SHIFT and drag the starting point (green arrow) to meet the endpoint (red arrow) from the first up motion path. (Note: If needed, zoom in to see the objects. On the View tab, in the Zoom group, click Zoom, and in the Zoom dialog box, in the Percent box, enter 200%. After editing, on the View tab, in the Zoom group, click Fit to Window to return to the slide to its original size.)On the slide, select the down motion path for the left dish and then drag the endpoint (red arrow) up to shorten the path to approximately .66” in length.In the CustomAnimation task pane, click the arrow next to the down motion path for the left dish, and then select EffectOptions. In the Down dialog box, on the Effect tab, under Settings, clear SmoothStart and SmoothEnd,and then click OK.Select the right dish group. In the CustomAnimation task pane, click AddEffect, point to MotionPath, and select Up.In the CustomAnimation task pane, select the Up motion path for the right dish, and then under Modify: Up,do the following:In the Start list, select WithPrevious.In the Speed list, select Fast.Click OK.In the CustomAnimation task pane, select the Up motion path for the right dish. On the slide, press and hold SHIFT and drag the starting point (green arrow) to meet the endpoint (red arrow) from the first down motion path.On the slide, select the upmotion path for the right dish, and then drag the endpoint (red arrow) up to shorten the path to approximately .66” in length.In the CustomAnimation task pane, click the arrow next to the upmotion path for the right dish and select EffectOptions. In the Up dialog box, on the Effect tab, under Settings, clear SmoothStart and SmoothEnd,and then click OK.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the right pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 65%.Click the button next to Color, and then click underThemeColors select White, Background 1 (first row, the first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 96%.Click the button next to Color, and then click underThemeColors select Black, Text 1, Lighter 50%(second row, the second option from the left).
  • 3-D cyclical shapes(Difficult)Tip: Some shape effects on this slide are created with the Combine Shapes commands. To access this command, you must add it to the Quick Access Toolbar, located above the File tab. To customize the Quick Access Toolbar, do the following:Click the arrow next to the Quick Access Toolbar, and then under CustomizeQuickAccessToolbar click MoreCommands.In the PowerPointOptions dialog box, in the Choose commands from list, select All Commands. In the list of commands, click CombineShapes, and then click Add.To reproduce the first shape on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then click Blank.Also on the Home tab, in the Drawing group, click Shapes, and then under BasicShapes click Oval (first row).On the slide, drag to draw an oval.Select the oval. Under DrawingTools, on the Format tab, in the Size group, enter 4.25” into the Height box and 4.25” into the Width box.Also on the Format tab, in the ShapeStyles group, click ShapeFill, and then click NoFill.On the Home tab, in the Drawing group, click Shapes, and then under BasicShapes click Pie (second row).On the slide, drag to draw a pie.Select the pie shape. Under DrawingTools, on the Format tab, in the Size group, enter 4” into the Height box and 4” into the Width box.Press and hold CTRL, and select the oval and the pie. Also on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Center.Click Align MiddleSelect the pie shape. Drag the yellow diamond adjustment handles to create a half-circle shape, with the rounded edge facing the top of the slide.On the Home tab, in the Drawing group, click Shapes, and then under BasicShapes click Oval (first row)On the slide, drag to draw an oval.Select the second oval. Under DrawingTools, on the Format tab, in the Size group, enter 3” into the Height box and 3” into the Width box.Move the second oval to the center of the first oval.Press and hold CTRL, and select the pie and the second oval. Also on the Format tab, in the Arrange group, click Align, and then do the following:Click AlignSelectedObjects.Click AlignRight.Click AlignMiddle.Press and hold CTRL, select the pie, and then select the second oval. On the Quick Access Toolbar, click Combine Shapes, and then click ShapeSubtract.Also on the Home tab, in the Drawing group, click Shapes, and under BasicShapes click Oval.On the slide, drag to draw an oval.Select the new oval. Under Drawing Tools, on the Format tab, in the Size group, enter 1” into the Height box and 1” into the Width box.Select the new oval.Also on the Format tab, in the Arrange group, do the following:Click Align to Slide.Click Align Middle.Click Align Center.Press and hold CTRL, and select the new oval and the freeform shape. Also on the Format tab, in the Arrange group, do the following:Click Align Selected Objects.Click Align left.Press and hold CTRL, and select the new oval and the freeform shape. On the Quick Access Toolbar, click Combine Shapes, and then click ShapeUnion.To reproduce the second and third curved freeform shapes, do the following:Press and hold CTRL, and select the freeform shape and the oval. Also on the Format tab, in the Arrange group, click Group, and the click Group.Select the group of shapes. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Select the duplicate group of shapes. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 120°.Press and hold CTRL, and select both groups of shapes. Also on the Format tab, in the Arrange group, do the following:Click Align to Slide.Click Align Middle.Click Align Center.Select the first group of shapes. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.Select the duplicate group of shapes. On the Home tab, in the Drawing group, click Arrange, and then click Ungroup.Press and hold CTRL, select the first freeform shape, and then the duplicate freeform shape. On the Quick Access Toolbar, click Combine Shapes, and then click ShapeSubtract.Press and hold CTRL, and select the freeform shape and an oval. On the Home tab, in the Drawing group, click Arrange, and then click Group. Select the group. On the Home tab, in the Clipboard group, click the arrow to the right of Copy, and then click Duplicate. Repeat this process until there is a total of three groups.Select a group. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 120°.Select another group. Under Drawing Tools, on the Format tab, in the Size group, click the Size and Position dialog box launcher. In the Format Shape dialog box, click Size in the left pane, and in the Size pane, under Size and rotate, in the Rotation box enter 240°.Press and hold CTRL, and select all three groups of shapes. Also on the Format tab, in the Arrange group, do the following:Click Align to Slide.Click Align Middle.Click Align Center.Select a group. Under DrawingTools, on the Format tab, in the Arrange group, click Ungroup. Repeat this process for each of the groups.Select an oval and then press DELETE to delete the oval. Repeat the process for each oval.Select the top, left freeform shape. Under DrawingTools, on the Format tab, in the ShapeStyles group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click Fill in the left pane, in the Fill pane, select Solidfill, and then click the button next to Color, under ThemeColors, click OliveGreen, Accent 3, Darker 25%.Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, do the following:Under Bevel, click the button next to Top, and then click Slope.Next to Top, in the Width box, enter 10 pt.Next to Top, in the Height box, enter 5 pt.Under Depth, click the button next to Color and then click OliveGreen, Accent 3, Darker 25%.Also under Depth, in the Depth box, enter 36 pt.Select the bottom freeform shape. Under DrawingTools, on the Format tab, in the ShapeStyles group, click ShapeFill, point to Gradients, and then click MoreGradients. In the Format Shape dialog box, click Fill in the left pane, in the Fill pane , click Gradient fill, and then do the following:In the Type list, click Linear.In the Angle box, enter 0°.Under Gradientstops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, select Rotate with shape.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 129, Green: 84, and Blue: 25.In the Transparency box, enter 0%. Select the next stop in the slider, and then do the following: In the Position box, enter 20%.Click the button next to Color, click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 204, Green: 151, and Blue: 0.In the Transparency box, enter 0%.Select the last stop in the slider, and then do the following: In the Position box, enter 81%.Click the button next to Color, click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 255, Green: 236, and Blue: 93.In the Transparency box, enter 0%.Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, do the following:Under Bevel, click the button next to Top, and then click Slope.Next to Top, in the Width box, enter 10 pt.Next to Top, in the Height box, enter 5 pt.Under Depth, click the button next to click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 129, Green: 84, and Blue: 25.Also under Depth, in the Depth box, enter 36 pt.Select the right freeform shape. Under DrawingTools, on the Format tab, in the ShapeStyles group, click ShapeFill, point to Gradients, and then click MoreGradients. In the FormatShape dialog box, click Fill in the left pane, in the Fill pane , click Gradientfill, and then do the following:In the Type list, click Linear.In the Angle box, enter 0.Under Gradient stops, click Add gradient stops or Remove gradient stops until three stops appear in the slider.Also under Gradient stops, select Rotate with shape.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 117, Green: 21, and Blue: 21.In the Transparency box, enter 0%. Select the next stop in the slider, and then do the following: In the Position box, enter 30%.Click the button next to Color, click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 194, Green: 40, and Blue: 14.In the Transparency box, enter 0%.Select the last stop in the slider, and then do the following: In the Position box, enter 74%.Click the button next to Color, click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 243, Green: 72, and Blue: 3.In the Transparency box, enter 0%.Also in the FormatShape dialog box, click 3-D Format in the left pane, and in the 3-D Format pane, do the following:Under Bevel, click the button next to Top, and then click Slope.Next to Top, in the Width box, enter 10 pt.Next to Top, in the Height box, enter 5 pt.Under Depth, click the button next to click MoreColors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 117, Green: 21, and Blue: 21.Also under Depth, in the Depth box, enter 36 pt.Press and hold CTRL, and select all three freeform shapes. On the Home tab, in the Drawing group, click Arrange, and then click Group.Select the group. Also on the Home tab, in the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click 3-DRotation in the left pane, in the 3-DRotation pane, click the button next to Presets, and then under Perspective, click PerspectiveRelaxed Moderately.Also in the FormatShape dialog box, click Shadow in the left pane, and in the Shadow pane, do the following:Click the button next to Presets, under Perspective, click Below.In the Transparency box, enter 70%.In the Size box, enter 90%.In the Blur box, enter 26 pt.In the Angle box, enter 90°.In the Distance box, enter 0 pt. To reproduce the background effects on this slide, do the following:On the Design tab, in the Background group, click BackgroundStyles, and then click FormatBackground. In the FormatBackground dialog box, click Fill in the left pane, in the Fill pane, click Gradientfill, and then do the following:In the Type list, click Linear.In the Angle box, enter 90°.Under Gradient stops, click Add gradient stops or Remove gradient stops until two stops appear in the slider.Also under Gradient stops, customize the gradient stops as follows:Select the first stop in the slider, and then do the following: In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row).Select the next stop in the slider, and then do the following: In the Position box, enter 19%.Click the button next to Color, and then under Theme Colors click Black, Text 1, Lighter 35% (third row).Select the final stop in the slider, and then do the following: In the Position box, enter 62%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 15% (first row, first option from the left).
  • AnimatedSmartArt chevron list(Basic)To reproduce the SmartArt on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Chevron List (seventh row, second option from the left), and then click OK to insert the graphic into the slide.To create a fourth chevron, select the third chevron at the bottom of the graphic, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and select AddShapeAfter.To add bullets for the fourth chevron, select the fourth chevron, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet.To enter text, select the SmartArt graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text for each level. (Note: In the example slide, the first-level text are the chevrons with “One,” “Two,” and “Three.” The second-level text are the “Supporting Text” lines.)On the slide, select the SmartArt graphic and drag the right center sizing handle to the right edge of the slide.With the SmartArt graphic still selected, on the DesignTab, in the Themes group, click Colors, and then under Built-In select Median. (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the background style will be applied to all of the slides.)With the SmartArt graphic still selected, under SmartArtTools, on the Design tab, in the SmartArtStyles group, click the More arrow, and then under 3-D select Inset (first row, second option from the left). Also under SmartArtTools, on the Design tab, in the SmartArtStyles group, click ChangeColors, and then under Colorful select ColorfulAccentColors (first option from the left). To reproduce the chevron effects on this slide, do the following:Press and hold CTRL, and select all four chevrons in the SmartArt graphic. On the Home tab, in the Font group, in the Font list select Franklin Gothic Medium Cond, and then in the FontSize box select 28 pt.On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click TextBox in the left pane, and in the TextBox pane do the following:Under Textlayout, in the Verticalalignment list select Bottom.Under Internalmargin, do the following: In the Left box enter 0”. In the Right box enter 0”. In the Bottom box enter 0”. In the Top box enter 0.6”.To reproduce the rectangle effects on this slide, do the following:Press and hold CTRL, and the four rectangles (with bulleted text). On the Home tab, in the Font group, do the following:In the Font list, select FranklinGothicBook.In the FontSize box, enter 21 pt.In the FontColor list, underThemeColors select White, Background 1 (first row, first option from the left).On the Home tab, in the bottom right corner of the Drawing group, click the Format Shapedialog box launcher. In the Format Shape dialog box, click Fill in the left pane, and in the Fill pane do the following:ClickGradientfill.In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows:Select the first stop in the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under ThemeColors select Black, Text 1 (first row, second option from the left).In the Transparency box, enter 100%. Select the last stop in the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under ThemeColors select Black, Text 1 (first row, second option from the left).In the Transparency box, enter 45%. Also in the FormatShape dialog box, click Shadow in the left pane, and in the Shadow pane, in the Presets list select NoShadow.Also in the FormatShape dialog box, click 3-DFormat in the left pane, and in the 3-DFormat pane, underBevel, in the Top list select NoBevel.Select the first from the top rectangle with bulleted text, and then do the following:On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane do the following:ClickGradientfill.In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add or Remove until two stops appear on the slider. Customize the gradient stops as follows:Select Stop 1 on the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).In the Transparency box, enter 100%. Select Stop 2 on the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under ThemeColors select Orange, Accent 2 (first row, sixth option from the left).In the Transparency box, enter 0%. Select the second from the top rectangle with bulleted text, and then do the following:On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane do the following:ClickGradientfill.In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows:Select the first stop on the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under ThemeColors select Olive Green, Accent 3 (first row, sixth option from the left).In the Transparency box, enter 100%. Select the last stop on the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under ThemeColors select Olive Green, Accent 3 (first row, sixth option from the left).In the Transparency box, enter 0%.Select the third from the top rectangle with bulleted text, and then do the following:On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane do the following:ClickGradientfill.In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows:Select the first stop on the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under ThemeColors select Gold, Accent 4 (first row, seventh option from the left).In the Transparency box, enter 100%. Select the last stop on the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under ThemeColors select Gold, Accent 4 (first row, seventh option from the left).In the Transparency box, enter 0%.Select the fourth from the top rectangle with bulleted text, and then do the following:On the Home tab, in the bottom right corner of the Drawing group, click the FormatShape dialog box launcher. In the FormatShape dialog box, click LineColor in the left pane, and in the LineColor pane do the following:ClickGradientfill.In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows:Select the first stop on the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under ThemeColors select Green, Accent 5 (first row, 8th option from the left).In the Transparency box, enter 100%. Select the last stop on the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under ThemeColors select Green, Accent 5 (first row, 8th option from the left).In the Transparency box, enter 0%.To reproduce the animation effects on this slide, do the following: On the Animations tab, in the Advanced Animation group, click Animation Pane.Select the SmartArt graphic, and then on the Animations tab, in the Animation group, click the More arrow on the Effects Gallery and under Entrance, click Grow & Turn.In the Animation group, click Effect Options, and under Sequence, click One by one.In the Timing group, in the Duration list, enter 01.00.In the Animation Pane, click the double arrow to expand the contents of the list. Press and hold CTRL, and select the second, fourth, sixth, and eighth effects (bullets’ grow & turn entrance effects), and then do the following:In the Animation group, click the More arrow on the Effects Gallery and then click More Entrance Effects. Under Basic, clickPeekIn, and then click OK.With the four peek in entrance effects still selected, in the Timing group,do the following:In the Start list, select WithPrevious.In the Duration list, select 01.00.Select the first grow & turn entrance effect in the list, and in the Timing group, in the Start list, clickWithPrevious.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Center (third option from the left). Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider. Customize the gradient stops as follows:Select the first stop on the slider, and then do the following:In the Position box, enter 20%.Click the button next to Color, and then under ThemeColors select White, Background 1, Darker 25% (fourth row, first option from the left). Select the second stop on the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under ThemeColors select Black, Text 1 (first row, second option from the left).
  • Animated vertical list merging with pictures(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, double-click Vertical Picture List (fifth row, first option from the left) to insert the graphic into the slide. To create a fourth shape in the graphic, select the third shape from the top, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and then click AddShapeBefore. Repeat this process to create a fifth shape.Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 6.38”.In the Width box, enter 7.91”.Under SmartArt Tools, on the Format tab, in the Arrange group, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, click each of the second-level bullets and then press DELETE until there are only three first-level bullets remaining (one for each shape). Enter text for each shape into the first-level bullets.On the slide, select the graphic. On the Home tab, in the Font group, select 14 from the Font Size list.Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click More,and then under Best Match for Document click Moderate Effect (fourth option from the left). On the Design tab (the regular Design tab, not that under the SmartArt Tools contextual tab), in the Themes group, click Colors, and then click Civic. (Note: If this action is taken in a PowerPoint presentation containing more than one slide, the theme colors will be applied to all of the slides.) Under SmartArtTools, on the Design tab, in the SmartArtStyles group, click Change Colors, and then under Colorful click Colorful Range – Accent Colors 3 to 4 (third option from the left). Click each of the five picture placeholders in the graphic, and then in the Insert Picture dialog box, select a picture and click Insert.Press and hold CTRL, and then select all five of the pictures on the slide. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles clickRoundDiagonalCornerRectangle (ninth option from the left).Under SmartArtTools, on the Format tab, in the Shape Styles group, click Shape Effects, point to Glow, and then do the following:Under Glow Variations, select 5 pt glow, Accent color 1, (first row, first option from the left).Point to More Glow Colors, and then under Theme Colors click White, Background 1 (first row, first option from the left).Press and hold CTRL, and then select all of the larger rounded rectangles. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles clickRoundDiagonalCornerRectangle (ninth option from the left). To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Advanced Animations group, click Animation Pane.On the slide, select the graphic. On the Animations tab, in the Animation group, click the More arrow at the Effects Gallery, and under Entrance, click Fade.In the Timing group, in the Duration list, enter 01.00.In the Advanced Animations group, click Add Animation, and under Motion Paths, clickLines, then do the following:In the Animation group, click Effect Options and then click Right.In the Timing group, in the Start list, selectWith Previous.Also in the Timing group, in the Duration list, select 01.00. On the slide, right-click the right motion path and then click ReversePathDirection.Press and hold CTRL, and then select the two animationeffects in the Animation Pane. In the Animation group, clickEffect Options and under Sequence, select One by One.Also in the Animation Pane, click the double arrows under each effect to expand the list of effects. Select the first animation effect (fade effect for the first rectangle). On the Animations tab, in the Timing group, in the Start list, select With Previous.Also in the Animation Pane, select the 11th animation effect (motion path for the first picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT to constrain the path to a straight horizontal line, and then drag the starting point to the left of the endpoint (red arrow). Also in the Animation Pane, do the following:Drag the 11th effect until it is second in the list of effects. Drag the 12th effect (motion path for the first large rectangle) until it is fourth in the list of effects. Also in the Animation Pane, select the 13th animation effect (motion path for the second picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the green arrow for the first picture motion path. Also in the Animation Pane, do the following:Drag the 13th animationeffect until it is sixth in the list of effects. On the Animations tab, in the Timing group, in the Start list, select With Previous.Drag the 14th animation effect (motion path for the second large rectangle) until it is eighth in the list of effects. In the Animation Pane, select the 15th animation effect (motion path for the third picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Also in the Animation Pane, do the following:Drag the 15th animation effect until it is 10th in the list of effects. On the Animations tab, in the Timing group, in the Start list, select With Previous.Drag the 16th animation effect (motion path for the third large rectangle) until it is 12th in the list of effects. Select the 17th animation effect (motion path for the fourth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path. Also in the Animation Pane, do the following:Dragthe 17th animation effect until it is 14th in the list of effects. On the Animations tab, in the Timing group, in the Start list, select With Previous.Drag the 18th animation effect (motion path for the fourth large rectangle) until it is 16th in the list of effects.Select the 19th animation effect (motion path for the fifth picture). On the slide, point to the starting point (green arrow) of the selected motion path until the cursor becomes a two-headed arrow. Press and hold SHIFT, and then drag the starting point to the left of the endpoint (red arrow), into the same position as the starting point for the first picture motion path.Also in the Animation Pane, drag the 19th animation effect until it is 18th in the list of effects. On the Animations tab, in the Timing group, in the Start list, select With Previous.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Radial.Click the button next to Direction, and then click From Top Left Corner (fifth option from the left)in the drop-down list.Under Gradient stops, click Add gradient stop or Remove gradient stop until two stops appear on the slider, then customize the gradient stops as follows:Select the first stop on the slider, and then do the following:In the Position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select the last stop on the slider, and then do the following: In the Position box, enter 100%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 25%(fourth row, first option from the left).
  • Projeto de pesquisa em VoIP Peering: Interconexão de redes VoIP utilizando mapeamento eletrônico de números - I Workshop CPqD de Inovação Tecnológica em VoIP Peering

    1. 1. Projeto de pesquisa em VoIP Peering:Interconexão de redes VoIP utilizandomapeamento eletrônico de númerosCPqD – UFU - Algar
    2. 2. A Mudança
    3. 3. CPqD
    4. 4. Do Projeto para a AcademiaDocenteDiscentesRecursos
    5. 5. • Construção da Proposta• Motivação e Justificativas• Trabalhos correlatos• Pesquisa• Desenvolvimento – Aplicações• Artigos Científicos - Apresentações• RelatóriosDa Academia para o Projeto
    6. 6. Sistemas Elétricos de PotênciaTelecomunicaçõesEngenharia da ComputaçãoControle e AutomaçãoEngenharia Biomédica
    7. 7. Programa de Pós Eng. Elétrica• 200 discentes• 2012: 48 mestres, 13 doutores• 53 periódicos• Mais de 200 publicações em Congressos
    8. 8. Projeto Intervoip - ObjetivosDesenvolver um sistema utilizando a tecnologia DNS-ENUM visando:- Promover a interconexão multilateral das redes ("ilhas") VoIP, permitindoque chamadas entre usuários VoIP de redes diferentes sejam realizadas totalmente noambiente IP, ao invés de serem direcionadas via rede tradicional STFC (PSTN).- Ampliar a possibilidade de utilização do serviço VoIP entre usuários dediferentes redes VoIP.- Contribuir para a redução do custo das chamadas, eliminando o custo deuso da STFC no caso de chamadas puramente VoIP(origem e destino).- Inserir o Brasil no contexto de utilização do protocolo ENUM como soluçãoemergente de interconexão.

    ×