O documento fornece instruções para montar e usar vários acessórios para um kit de jato d'água C38, incluindo como adicionar anéis de centralização de 100 mm, 150 mm e 225 mm para melhorar o desempenho de corte. O documento também explica como montar um kit de tampão C38 usando peças do kit inicial C38.
O Catálogo Giacon 2020 apresenta produtos da linha hidráulica para construção civil.
No entanto, disponibilizamos produtos para diversos tipos de lojas como: Oficinas, Bazares, Supermercados, Vendas, Papelaria, Agropecuária, Posto de Gasolina, dentre outros.
Pesquise com carinho que você encontrará produtos para sua loja!
Também distribuímos para todo o interior de São Paulo e Capital. Frota Própria para entregas.
O Catálogo Giacon 2020 apresenta produtos da linha hidráulica para construção civil.
No entanto, disponibilizamos produtos para diversos tipos de lojas como: Oficinas, Bazares, Supermercados, Vendas, Papelaria, Agropecuária, Posto de Gasolina, dentre outros.
Pesquise com carinho que você encontrará produtos para sua loja!
Também distribuímos para todo o interior de São Paulo e Capital. Frota Própria para entregas.
Its specialty is to penetrate, unblock and cut through extreme tree roots, hard grease around bends or dropping into a shaft, with its front turbo nozzle
Can be used in 100 - 450 mm (4-18") lines.
Travels through 100 mm (4") bends and drops into a 100 mm (4") shaft when travelling downstream
Cutting Turbo Nozzle for 100 mm to 300 mm (4-12") lines (DC38)DirectHitNozzles
The DC38 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43t to be used in lines from 90 mm to 225 mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC38 can cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Extreme Big Cutter (DC43) for 150 mm to 300 mm (6-12") linesDirectHitNozzles
The DC43 sewer nozzle assembly is to be used with all jetters under 31 litres per minute.
We recommend the DC43 to be used in lines from 100 mm to 300mm to cut roots and bigger lines to flush out debris. The C38rs can work in 90 mm lines without bends.
The DC43 cut through roots, grease, ice and blast through sand.
You will have the choice and flexibility to cut backwards with the most advance turbo nozzle technology in the world. The turbo nozzles that we use have tungsten carbide seats and can last up to 5 times longer than a ceramic seat.
Due to the laminar water that the turbo nozzles produce you will be able to use the assembly in all blocked drain scenarios. Cutting roots quickly will be very easy to do now.
You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 82 C.
Speciality Long Penetrator (C43r) - Forward Clearing Of Blocked DrainsDirectHitNozzles
Ideal weight to work in mains with front rings to cut, clean and flush down stream.
“Penetrate, unblock, cut tree roots, hard grease and flush out lines forwardly from 150 - 450 mm (6-18") lines.
Travels through 100 mm (4") bends and drops into a 150 mm (6")shaft when travelling downstream
Minimum hose size to be used with is 3/8".
Add a different size ring to increase its power.
2. PCT/AU2012/000326
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Front view
Note: the C38 carriage only has a o ring on each side
Back viewSide view
From your C38 Stater Kit take the carriage
10. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Place the assembly in the pipe
11. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Turn the water on
19. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
Add on no: 2 and make a C38r
150 MM 225 MM
Place the assembly in the pipe and turn water on
20. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
Add on no: 2 and make a C38r
150 MM 225 MM
Using the 100mm ring you centralise the front nozzle water cone in the 100mm pipe
36. PCT/AU2012/000326
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
To make the C38 Cap Kit take the C38 Carriage from you Starter Kit
40. PCT/AU2012/000326
PCT/AU2012/000326
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Add the Back nozzle from the Cap Kit
41. PCT/AU2012/000326
PCT/AU2012/000326
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Screw them together with spanners provided in the starter kit
44. PCT/AU2012/000326
PCT/AU2012/000326
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Place assembly in the pipe and turn water on
49. PCT/AU2012/000326
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
50. PCT/AU2012/000326
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
51. PCT/AU2012/000326
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
24º
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
52. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
To make the C38r assembly take your C38r carriage
PCT/AU2012/000326
Front view Back view Side view
53. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
From your Starter kit take the front nozzle
PCT/AU2012/000326
54. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Screw them together with spanners provided in the starter kit
55. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Advantage: Min access is 40 mm (basin-kitchen sink-laundry tub-vent)
Disadvantage: Low thrust (recommended to be used down stream only into the blockage)
56. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Place assembly down a 40 or 50mm PVC pipe
57. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Place assembly down a 40 or 50mm PVC pipe
58. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Push assembly in the pipe
59. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Turn the water on
60. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Turn the water of
61. 24º
PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Take of the front nozzle
62. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
63. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Take the cap from your Cap kit
64. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Screw them together with spanners provided in the starter kit
65. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Place assembly in the pipe
66. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
1. Turn down the revs on your engine
2. Turn water on
67. PCT/AU2012/000326
24º
C38 Starter Kit Add on no:1 and make a Cap Kit Add on no: 3 are the rings
24º
PCT/AU2012/000326
24º
Add on no: 2 and make a C38r
100 MM 150 MM 225 MM
Turn the water of