![Série CM ,[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recomendados
Mais conteúdo relacionado
Mais procurados
Mais procurados (12)
Semelhante a Pro Tec Apresentação B&W Novo Produtos
Semelhante a Pro Tec Apresentação B&W Novo Produtos (20)
Mais de protecaudioevideo
Pro Tec Apresentação B&W Novo Produtos
Notas do Editor
- Munich 25th April 2008 B&W Group Presentation The XT2 is versatile in the different ways it can be mounted.
- Munich 25th April 2008 B&W Group Presentation Two views of the speaker on its wall bracket bracket – left & right. This is to emphasise that the bracket is not symmetrical (the 2 bumps are different heights. The reason why will become clear with the XTC. The speaker will only swivel in the direction of the smaller bump in the bracket. To swivel the other way you turn the bracket the other way up. The wavy bit is the only part that you turn upside down. The plate you screw into the wall remains the same way up, but users are warned that it is not on the centre line of the speaker. The wall bracket is supplied with speaker and there is a mounting template.
- Munich 25th April 2008 B&W Group Presentation The floor stand is an optional extra. There is neat cable management. The rear section of the stand's pillar houses the cable, which goes straight into a hole in the base of the speaker through to the terminals. It does not have to loop out at the top of the stand. The front section of the extruded pillar may be filled with sand if desired.
- Munich 25th April 2008 B&W Group Presentation Features of XT2. Aluminium extrusions of the cabinet are identical across all 3 speakers in the range.
- Munich 25th April 2008 B&W Group Presentation This shows how the wave bracket is used to support the centre speaker's curved profile. The top surface of the bracket is rubber for friction. Now you see why the wave is asymmetrical. To tilt up, put the larger bump to the front as shown here. To tilt down have the larger bump at the back.
- Munich 25th April 2008 B&W Group Presentation The bracket can also mount the XTC on the wall. This time you need to orient it according to whether you want it to tilt up or down. Note that this bracket always slides on to the wall plate from the top, so is always secure in all orientations of the speaker.
- Munich 25th April 2008 B&W Group Presentation Front view of the XTC The feature set is like the other two speakers, except that the tweeter is mounted on the main baffle, as constrained by the horizontal orientation.