configuration of Access Point router by yourself

1. Configuration any Wi-Fi router
using LAN cble
Dlink-1360

2. Requirements
• LAN cable (exist in the box)Else make sure the
cable is straight
• Browser (Chrome ,Firefox ,I-explorer ,safari)

3. Configuring LAN cable
• Unbox the D-link device
• Turn on the device using power socket
• Put the LAN cable in the router and another
end in PC,laptop network port
• You can see the default network name as
showing like dlink…. Its because i am using the
dlink

4. • Open network and sharing center
• Clink on Local Area connection
• Properties then click TCP/IPv4
• Put the IP address same class as showing on back
side of D-link like 192.168.0.50
• Put the following ip address in your PC or laptop
• 192.168.0.55
• Subnet 255.255.255.0
• Gateway will the device IP address (192.168.0.50)

5. • Open internet web browser and type the device IP
(192.168.0.50) will show the webpage of the device
user name Admin and password blank(empty)
• Click launch Wireless Setup Wizard
• Click on next
• Choose Access Point click next
• Select Manual option
• Put the Network name as you want to
• Put the password as showing on network key tap
• Wait 30 to 45 second until restart the device itself

6. • Unplug the LAN cable
• Put the internet LAN cable in the d-link LAN
port as provided your ISP(internet service
provider)
• Choose the wifi name as you assign the device
Enjoy
&
Thanks