Kodo Millet PPT made by Ghanshyam bairwa college of Agriculture kumher bhara...
Diuretics screening models
1. Screening models for
diuretic agents
Presented by: Ms. Hiran Suthar
M.Pharm Sem 1 department of pharmacology
LMCP
11/11/17
2. Diuretics
• Elimination of excess urine (more than normal levels) is
termed as diuresis and the drugs that facilitate this process
are called diuretics
• Urine consists of metabolic waste materials, water and some
electrolytes.
• Saluretics are agents that facilitate the removal of salt or
especially sodium ion.
3. Types of diuretics
CLASS OF DRUG LOCATION EXAMPLE
Carbonic anhydrase
inhibitors
Proximal tubule Acetazolamide
Loop diuretics Loop of Henle Furosemide/bumetamid
e
Thiazide diuretics Distal tubule Hydrochlorthiazide/bend
roflumethiazide
Potassium sparring
diuretics
Collecting duct Spironolactone/triampte
rene/amiloride
Osmotic diuretics Lumen of nephron Mannitol
4. Evaluation models
1. In vitro:
isolated tubule preparation
carbonic anhydrase inhibition
patch clamp technique
2. In vivo :
Lipschitz test
saluretic activity in rats
stop flow technique
clearance method
micropuncture technique
5. Isolated tubule preparation
PRINCIPLE :
Measurement of change in concentration of solutes in
perfusion fluid
PROCEDURE :
This technique has been used in the kidney segments of
several species like rat, mouse, hamster, rabbit etc.
The thin (<1 mm ) tubule segments are dissected from kidney
slices
Segment is transferred into perfusion chamber
6. OIL
Suction
Perfusion Pipette
Perfusion Fluid
Accumulated
Fluid
Narrow Pipette
For Sampling
To perfuse a suitable tubule, one end of the tubule is holded by
micropipette
A perfusion pipette is inserted into tubule lumen
The other end of the tubule is sucked into collecting pipette
The oil inside the collecting pipette prevents the evaporation
All the accumulated fluid is collected at periodic intervals by
inserting a narrow calibrated pipette in the collecting pipette
To approximate the in vivo situation, an isotonic rabbit serum is
perfused while the tubule is immersed in a bath of rabbit serum
7. EVALUTION :
The absolute volume of reabsorption is determined from
the change in the concentration of an impermeable
marker like (3H) inulin, (125I) isothalamate in the
collecting fluid
Leaks around the perfusion pipette is detected from the
appearance of the marker in the external bath
9. PROCEDURE:
Here the reaction vessel is used
CO2 flow rate is adjusted to 30-45 ml/min.
Reaction vessel
Phenol Red
CA enzyme
(from Dog blood)
Water/ Water +
Drug
HCO3
- buffer
10. Following parameters are determined.
Tu = Time for color change in absence of enzyme
Te = Time for color change in presence of enzyme
Tu – Te = Enzyme rate
Ti = Enzyme rate in presence of inhibitor
% Inhibition = 1 –
(Tu
_Te) - (Ti -Te)
Tu – Te
X 100
EVALUATION :
11. PATCH CLAMPTECHNIQUE
PRINCIPLE :
This technique allows the study of single-ion channels as well as
whole-cell ion channel currents
It requires a patch electrode with a relatively large tip (>1 mm)
that has a smooth surface
12. PROCEDURE :
The patch-clamp electrode is
pressed against a cell
membrane and suction is
applied to pull the cell
membrane inside the electrode
tip
The suction causes the cell to
form a tight, high-resistance
seal with the rim of the
electrode, usually greater than
10 giga Ohms, which is called
a gigaseal
Over 1 μm
Rseal≥10 GΩ
Gigaseal
Amplifier
13. Cell-attached, cell-excised,whole-cellmode of this techniqueallow
investigation of ion channels
Cell-attached mode :
With this mode, the patch
electrode remains sealed to
the cell membrane,
permitting the recording of
currents through single-ion
channels from the patch of
membrane surrounded by
the tip of the electrode
Glass pipette
Cell
attached
Electrode
14. Whole-cell mode :
From the initial cell-attached configuration, additional suction
is applied to rupture the cell membrane, thus providing access to
the intracellular space of the cell.
The soluble contents of the cell will slowly be replaced by the
contents of the electrode
Whole-cell mode records currents through all channels from the
entire cell membrane at once
Electrode
Glass pipette
Cell
attached
Whole-cell
configurationSuction
15. Inside-out mode :
From the cell-attached configuration, the electrode is quickly
pulled out from the cell
This leaves the patch of membrane attached to the electrode
exposing the intracellular surface of the membrane to the external
environment, allowing pharmacological manipulations to the
intracellular side of the ion channels.
Electrode
Glass pipette
Cell
attached
Inside-out
patch
Discard
cell
Suction
16. Outside-out mode :
After achieving cell-attached configuration, the electrode is slowly
withdrawn from the cell, allowing a membrane patch to be Excised
Which will then reorganize on the edge of the electrode with the original
interior of the cell membrane facing inside the electrode solution
This mode allows researchers To examine ion channel properties,
studying effects of membrane non permeable molecules on the
intracellular part of the channel
Glass pipette
Cell
attached
Electrode Outside-out
patch
Discard
cell
Suction
17. EVALUTION :
Concentration response curve of the drugs which inhibit ion
channels can be obtained
Single ion channel events studied by cell-attached &
cell-excised technique
Co transport system only studied by whole cell patch clamp
technique as transport rate of single event is too small to detect
18. PRINCIPLE : Based on water & Na+ excretion in test animal &
compared to rats treated with std. drug
PROCEDURE:
Male Wistar rats weighing 100-200 g are used & placed
in Metabolic cages
Metabolic cages :
Wire mesh at bottom
Funnel to collect urine
Stainless-still sieves are placed into the funnel
to retain feces and to allow the urine to pass
Rats are fed with std diet & water
15 hr. before the experiment, food & water are withdrawn
LIPSCHITZ TEST
19. Urine excretion recorded up to 5 hr & 24 hr.
Na+ content of urine estimated by flame photometer & Urine
vol. excreted calculated for each group
Test
2 group(6 rats)
Std
2 group(6 rats)
Animals are divided as treated with test and standard drug
Conti….
20. EVALUATION :
Results expressed in LIPSCHITZ value for both urine
excretion & for electrolyte
LIPSCHITZ value = Urine output in test animal
Urine output in std. drug treated animal
Lipschitz value ≥ 1 indicates positive effect
Lipschitz value ≥ 2 potent diuretic activity
For studying prolonged effect, 24 hr urine sample collected &
analyzed
For Saluretic drugs
Hydrochlorothiazide = 1.8
For loop diuretics ≥ 4
21. SALURETICACTIVITYIN RATS
PRINCIPLE :
Excretion of electrolytes is important for the treatment of
peripheral edema, CHF, hypertension
so, need to develop diuretic with saluretic & K+ sparing
effect
Diuresis test in rats is designed to determine Na+ ,K+ , Cl-
, water content & osmolarity of urine
Ratio b/w electrolytes can be calculated indicating
carbonic anhydrase inhibition or K+ sparing effect
22. PROCEDURE:
Male Wistar Rats weighing 100-200 g are fed with std diet &
water
15 hrs prior to experiment food is withdrawn but not water
3 animals placed in one metabolic cage
Urine excretion measured every hr up to 5 hr & collected urine
is analyzed for Na+ ,K+ & Cl-
2 groups, each of 3 rats used for test & std drug
Furosemide, HCT, triamterene & amiloride are used as
standards
23. EVALUATION:
For Saluretic activity :
Na+ + Cl- excretion calculated
For Natriuretic activity : Na+ is calculated
K+
Natriuretc effects > 2
Potassium sparing effect > 10
For estimating CA inhibition :
Cl- is calculated
Na+ +K+
Inhibition can be excluded at ratio between 1 to 0.8 with
decreasing ratio slight to strong carbonic anhydrase inhibition
can be assumed
24. STOPFLOWTECHNIQUE
PRINCIPLE :
Useful in localization of transport process along the length of nephron
During clamping of ureter, GFR is grossly reduced
Contact time for tubular fluid in respective nephron segment increases &
conc. of constituents of tubular fluid approximate the static head situation
After releasing clamp, rapid passage of tubular fluid modify composition of
fluid only slightly
Urine is sampled sequentially
25. PROCEDURE :
This method can be Performed in different animals during
anesthesia
Ureter of animal is clamped allowing static column of urine to
remain in contact with tubular segments for longer than usual
time period
Clamp released & urine is sampled sequentially
Substances examined are administered along with inulin
before the application of occlusion
EVALUTION :
Concentration of inulin and substance under study is measured
Fractional excretion of substance & inulin are plotted against
cumulative urine volume
26. CLEARANCE METHOD
PRINCIPLE :
Method for evaluation of renal function & provide information
about site of action of diuretics
Where,
CH2O : Clearance of solute free water during water diuresis
TCH2O : Reabsorption of solute free water during water restriction
Drug acting on CH2O & TCH2O
PCT Increase Both CH2O & TCH2O
LOH Impaire both CH2O & TCH2O
DCT Reduce CH2O But Not TCH2O
27. PROCEDURE :
Test may be performed in species from which urine and
plasma can be readily collected.
Low level changes in concentration may be more readily
reflect in rat than in dog
(1) water diuresis :
Rat :
Administration of oral dose of water by gavage representing 5%
of the rat body weight
Placed in Metabolic cage
Urine samples (every 30 mins. For 2 hrs.)
28. Dog :
Oral administration 50ml water /kg. body weight
Maintained by continuous infusion into jugular vein of 2.5 %
glucose soln.+ 0.58 % NaCL soln. at 0.5 ml/min/kg.body
weight
Urine sample by urethral catheter
29. On the day of experiment 20 mU/kg vasopressin injected i.v.
followed by infusion of 50 mU/kg vasopressin
To obtain constant urine flow 5% NaCl solution infused up
to i.v. dose of test compound
Withdrawing water 48 hr before experiment &
0.5 U/kg vasopressin in oil injected i.m. before 24 hr
Urine & blood sample collected
2) Hydropenia:
30. EVALUTION :
Following parameters are determined & results of test drug
compared with std drug
Water and electrolyte excretion
Glomerular filtration rate : Inulin is used
Renal plasma flow : Para amino hyppurate is used
CH2O & TCH2O
Free water clearance ( cH2o ):
Amount of the urine excreted in excess that needed to clear
salt
CH2O = V – Cosm
31. Free water reabsorption ( Tch2o ) :
In the presence of ADH urine is concentrated at that time
V < Cosm.
TCH2O = Cosm – V
Osmolar clearance (cosm) :
Volume of urine containing the solute at the osmolal conc.
equal to that of plasma (Posm)
Cosm = V(Uosm / Posm)
where,
V : Urine flow (ml/min.)
Uosm : Urine osmolarity (mosm/kg.body weight)
Posm : Plasma osmolarity (mosm/kg.body weight)
33. Animals :
LOCATION ANIMALS TO BE USED
Bowman’s space Rat
Loop of Henle Rat
Proximal tubule Dog and rat
Distal tubule Dog and rat
Collecting duct Rat and hamsters
According to the site where micropuncture is going to be
performed, appropriate animal model is chosen.
Anesthesia :
Thiobarbital and Pentobarbital is injected via i.p. route
34. Surgical preparation :
Rat fasted for 12-18 hrs & anaesthetized by pentobarbital
Tracheotomy is performed
Jugular vein cannulation for infusion
Femoral artery is catheterized for obtaining blood
One ureter & bladder is catheterized to collect urine
Bolus injection of inulin 3H given, followed by 0.85% NaCl
solution.
Left kidney exposed by flank incision in which 3 cm cut made at left
subcostal margin & cavity filled with oil at 37°C.
35. After 45 mins. the control puncture of tubules is performed
Micropipette is used to collect tubular fluid sample
Control period followed by the test period & after equilibration of
30 min with test compound micropuncture is performed and
tubular fluid collected
Microscope :
A stereo microscope and light source are required with
magnification range (10X100).
Zoom optic – most convenient for changing
magnification.
36. Micropipette : Diameter from 6 nm to 12 nm
Micro perfusion Pump : Delivery rates – 1 to 40 nl/min
Temp control : Perfusing oil is kept at 37
o
C by heating coil
Tubule blockage :
Done by castor oil stained with sudan black and filtered. It doesn’t
penetrate into Tubular epithelial cells
37. ADVANTAGE:
Allow localization & analysis of renal transport in vivo
DISADVANTAGE:
Require anesthesia & extensive surgery
Exposure of nephron may alter its function
Increase in luminal pressure lead to decrease in glomerular
function
39. PROCEDURE :
After identification of segment micropipette is advanced
at 10º-30º angle
An oil drop is introduced
Collection is done by gentle suction in such a way that
oil block remains in its place
Reference point for proximal tubule : Glomerulus
for distal tubule : Macula densa
FREE FLOW MICROPUNCTURE
40. Absolute reabsorptive rate ( C ) is calculated by.
C = ( VO – VC ) / L
Where VO = Single nephron filtration rate.
VC = Collection rate (nl/min)
L = Length of tubule
EVALUATION :
41. Conti…..
Measurement of Single nephron filtration rate :
GFR (ml/min) = V (ml/min) · ( U / P ) In
SNGFR (nl/min) = Vtf (nl/min) · ( tf / P ) In
Where,
GFR = Filtration rate for kidney or inulin clearance
SNGFR = Filtration rate for single nephron
( tf / P ) In = Conc. of inulin in tubular fluid / Conc. of inulin in plasma
(tf / P)In is an index of volume reabsorption at the point of
micropuncture
Vtf = Flow rate of tubule fluid
It is obtained by a timed quantitative collection of the tubule fluid.
42. • Similar to free flow tech. but limited to collecting system
• An oil filled catheter is fixed to a heatable platinum loop
• Catheter is advanced into a collecting duct at a tip of
papilla
• Pressure in the catheter is lowered and urine collection is
started
MICROCATHETERISATION
43. MICROINJECTIONAND MICROINFUSION
MICROINJECTION :
Small fluid volume containing 3H and 14C labeled inulin and
labeled tracer of the substance is injected into the segments of
superficial nephron
After introduction of pipette, 30 nl of tracer containing solution
is injected over a period of 15 - 30 sec.
Urine is collected at every 30 sec and tracer is estimated by
scintillation counting.
EVALUTION :
Urinary recovery of the substance and inulin are compared which
allows the estimation of fractional reabsorption of given substance.
44. In this method pipette is mounted on a micro infusion pump.
With help of this pump micro infusion is made at a very low flow
rate for several minutes.
After completion of micro infusion period, the pipette is left in
the place so that fluid cannot escape from the hole. It prevents loss
of tracer from hole.
During micro infusion and for 20 additional minutes, urine is
collected at every 2 min.
EVALUTION :
Cumulative recovery of the substance and inulin are compared
which allows the estimation of fractional reabsorption of given
substance.
MICROINFUSION :
45. MICROPURFUSION
It involves perfusion of tubule segment. The decrease or
increase in the concentration of substances under study
indicates influx or out flux
Water reabsorption is monitored through labeled inulin.
46. An oil filled pipette is injected
into proximal tubule
The micro perfusion pipette is
introduced in one of the
successive loop and the collecting
pipette is inserted in the last
accessible loop
MICROPURFUSION OF PROXIMAL CONVOLUTED TUBULE :
47. The proximal and distal oil
block is inserted
Micro perfusion is initiated
after insertion of oil blocks
Samples are collected
Conti…..
48. Insertion of pipette filled with
Lissamine green
An oil filled pipette is inserted into
next loop
Oil block is introduced with
pipette
Perfusion pipette is introduced
To keep the oil block at its place,
tubular fluid proximal to the oil
block is collected by pipette
containing Lissamine green collects.
MICROPERFUSION OF LOOP OF HENLE :
49. Oil filled pipette is
withdrawn and is reinserted
in distal tubule. Distal oil
block is injected
Sampling is done by
using collecting pipette
Conti….
50. A large drop of stained castor oil is
injected into the proximal tubule
through one barrel of the double
barreled pipette
A drop of saline injected through the
other barrel of the pipette so the drop
of castor oil is splitted
As saline drop is reabsorbed by
tubule epithelium, drops of castor oil
approach each other and saline drop
shrinkage occurs. The rate of
shrinkage of the saline drop is
measured by sequence photography
SHRINKING DROPLET METHOD
51. EVALUTION :
The time for reabsorption of one half of the volume of the
saline drop (t1/2) and tubule radius (r) is measured.
Absolute reabsorptive rate (C) is determined by
following equation.
C = ( 0.693 π r 2 / t1/2 ) ·10-3
52. STATIONARYMICROPERFUSION
PRINCIPLE :
It includes the collection and analysis of the injected fluid
droplet
Fluid reabsorption is retarded or prevented by addition of
solute which cannot be reabsorbed
Alteration in the concentration of substance under study is
used as an indicator of tubule transport
53. An oil filled pipette , Pipette with
test fluid , Additional oil filled
pipette are introduced in proximal
tubule
An oil column is inserted from
first pipette
Conti…..
54. Splitting of oil column is done by
injection of test fluid from the
second pipette. Fluid droplet is
exposed to tubule epithelium
Further oil is introduced from
pipette to push fluid downstream.
Collection of fluid is done using
third oil pipette
Conti…..
55. Peritubular capillary puncture is best performed at
vasa recta in rat or in large capillaries of dog
ADVANTAGES :
To determine protein conc. in afferent arteriole
To determine PH
and CO2 conc. in kidney papilla
LIMITATIONS :
Handling of small samples is difficult
Damage of blood cells causes considerable errors
MICROPUNCTURE OFPERITUBULAR
CAPILLARIES
56. PERITUBULAR MICROINJECTION :
Similar to intratubular microinjection
Test substance is injected into vasa recta capillaries and
radioactive labeled substance is monitored in urine
LIMITATION : Short contact with tubular epithelium
57. PERITUBULAR MICROPERFUSION :
Pipette is inserted into superficial capillaries
ADVANTAGE : Damage to cell is less likely
LIMITATIONS :
High pressure is required to push the blood
58. IN VITRO METHODS
Isolated tubule preparation : Measurement of change in
concentration of solutes in perfusion fluid
Carbonic anhydrase inhibition : Inhibition of carbonic
anhydrase enzyme
Patch clamp technique : Measurement of the current
across the ion channel
SUMMARY
59. Lipschitz Test : Measurement of urine volume and sodium
excretion
Saluretic activity in rats : Measurement of electrolytes
excretion
Stop flow technique : Allow urine to remain in nephron for
long period and then collection of urine
Clearance Method : Measurement of Water and electrolyte
excretion, GFR, Renal plasma flow, CH2O & TCH2O
Micropuncture Techniques :Measure the Changes in tubular
fluid reabsorptive rates and electrolyte concentration
INVIVO METHODS
60. References
1) Drug discovery and evaluation: pharmacological assays 2nd edition, by Gerhard
vogel.
2) RANG and DALE’S Pharmacology Sixth Edition by H.P. RANG, M.M. DALE, J.M.
RITTER, R.J. FLOWER
3) Powerpoint presentation acknowledgement : Mr. vijay patel LMCP