Fil-Trek Corporation is fundamentally a manufacturing based filtration company. Their goal is to become the industry's most reliable and competitive supplier with a complete line of products at the cutting edge of filtration. For more information, visit http://www.fil-trek.com/. They are located at 70 Fleming Dr Cambridge, ON N1T 2B1 (519) 623-7448.

1. How to Keep Industrial
Filters Clean

2. Industrial filters are an integral part of many
different manufacturing processes. Without
them, safety and quality would suffer to the
point that businesses would no longer be able
to operate.
It’s also important that industrial filters are clean
for maximum efficiency and effectiveness. Here
is some information on how to keep your
industrial filters clean and working well.

3. Read All the Information
It is possible to clean and re-use certain types of
industrial filters, but it’s important to to know if the types
you have can be cleaned. Certain elements, such as
high efficiency filter elements, coalescing filter elements
or filters with special filtration media usually can’t be
cleaned.
Take the time to read all the information that’s provided
with your filters so you know exactly what you can and
can’t do.

4. When to Clean Your Filters
If you have industrial filters that you can clean, you
should watch for signs that it is time for a cleaning.
Watch for things like:
• A noticeable reduction in air flow
• A drop in the air pressure
• Reduced performance
• A reduction in product quality
• Your maintenance schedule says it’s time

5. Hand Cleaning
One method of cleaning industrial filters is by basic
hand cleaning. For this type ofcleaning:
• Remove the filter from the housing
• Hold it out vertically with one hand
• Run your fingers over the fins like strumming a guitar
• Most of the dirt and dust will be dislodged from this
motion

6. Compressed Air Cleaning
Compressed air works great for cleaning many different
materials, and industrial filters are on that list. Start by
settiing up the compressor to blow about 100 psi of
pressure.
Then, blow the dirt and debris off the inside of the filter
element, then the outside of the cartridge and then the
inside again.
This should give you a relatively clean filter, but if you
still see dirt, try again until it is clean.

7. Washing the Filter
If you’ve tried the hand cleaning method and/or
compressed air method and the dust and dirt is still on
there, you may want to try washing the filter.
Wash off the filter or soak it in a mild soap or detergent
and water until the dirt is removed. Afterwards, use the
compressed air like before to get rid off any excess
moisture.
Don’t bake the filter or expose it to high heat to try and
dry it, because you may cause permanent damage.

8. Professional Cleaning
If you run a fast-paced operation or just don’t have the
time to clean your industrial filters yourself, you can
send them out for professional cleaning.
A professional cleaning service will unplug the filter and
perform a quality check before sending the filter back.
Once you find a reliable cleaning service, you will save
money because you will be able to re-use your filters
several times before buying new.

9. Significance
The significance of having clean industrial filters as part
of your operation shouldn’t be overlooked. Clean filter
mean efficient filters,and the efficiency of the filters can
affect:
• Product safety
• Product quality
• Meeting legislation and regulations
• Marketing strategy
• Company reputation

10. Industrial Filter Applications
Industrial filters are used in many different industries
and for many different applications. Here are some of
the most common:
• Pharmaceutical
• Food and Beverage
• Oil and Gas
• Pulp and Paper
• Chemicals
• Electronics

11. Advice
• Fil-Trek Corporation is fundamentally a manufacturing based
filtration company. Their goal is to become the industry's most
reliable and competitive supplier with a complete line of
products at the cutting edge of filtration. For more information,
visit http://www.fil-trek.com/. They are located at 70 Fleming Dr
Cambridge, ON N1T 2B1 (519) 623-7448.