MikroTik newsletters from #60 to #67

NEWSLETTER, ISSUE #67 - SEPTEMBER 2015 1
NEWSLETTER, ISSUE #67 - SEPTEMBER 2015
• CHR and network simulation instructions
• DynaDish 5
• quickMOUNT PRO
• Recent MUMs
• Upcoming MUM events
• New wAP Access Points
• New software release strategy
• hAP
• hap lite - new case
• hEX
New software release strategy
We have introduced a new software release strategy, where bug fixes will be separated from new features. Now, you will be able to
upgrade RouterOS without adding any new features, just the most important fixes.
Starting from v6.31 you are able to select a release “branch” in the quickset upgrae menu and web download site. The choices are
“Bugfix only”, “Current” and “Release candidate”. Bugfix only will only contain verified fixes, and no new features. Any version can be
chosen to be a bugfix version, it is not indicated by the version number, but RouterOS will show the version type (starting v6.33).
The Current release contains the same fixes but also new features and other improvements, sometimes also less critical fixes than in
Bugfix. And finally the Release Candidate is more likely to a nightly build. We will not do intensive testing before publishing these, only
check if the upgrade can be done and if most features work fine.
The graphic illustrates an example release flow in all these branches.
New wAP Access Points
The wAP (wall access point) is a small weatherproof wireless access point
for your mobile devices, perfect for installation outside your house, in the
garden, on your porch or anywhere else where you need wireless access
from your phone or computer.
It can be mounted on a ceiling, wall or a pole, as you prefer. Everything is
included - drill template, plastic ties, screws and screw anchors. The cable
can be routed through the wall through the breakout on the back of the
case, to make your installation look clean and inconspicuous.
The wAP can also be securely closed, so that only the installer
can open it using the provided special screwdriver. Since the
unit is attached from the inside of the case, this makes your
device safe to use in public locations.
The device has one 10/100 Ethernet port and can be mounted
on a wall to provide basic internet access in any location. It
looks unobtrusive and sleek, available in two colours - black
(RBwAP2nD-BE) or white (RBwAP2nD).
$45
24V 0.38A
Power adapter
Wall board
mounting kit
• Passive PoE and 802.3af/at with unshielded cable
• Weather proof indoor/outdoor install
• CAPsMAN ready
• Ceiling or wall, or polemount
• Full corner to corner room coverage
PoE injector 2x plastic
polemount
straps
Ceiling droppanel
mount base
View product online
Break out

We are releasing a test version of an exciting new feature - Cloud Hosted Router (CHR).
It is a Virtual Machine image of RouterOS that has full functionality of RouterOS without any kind of conventional RouterOS license, with
the limitation of 1Mbit per interface, in future, we will offer unlimited speed with a perpetual license or subscription. This allows you to use
RouterOS in training classes, for testing, for experimentation or any other purpose, without the need for a 24h trial or a Demo license.
Download and usage instructions
http://forum.mikrotik.com/viewtopic.php?f=21&t=98981
hAP lite - new case!
hEX
hAP lite new case: The beloved hAP has received a makeover!
Improved looks and home friendly colours will make it easy to use in
any location. The hAP is now truly a home access point and will look
great on your bookshelf or on the table next to your TV.
The hEX is a small five port Gigabit ethernet router in a nice plastic
case for managing your wired SOHO network.
The unit is equipped with a powerful 720MHz CPU, 64MB RAM, five
Gigabit Ethernet ports and a RouterOS L4 license. The device supports
6-30V input voltage and passive PoE input.
5V 0.7A power adapter
This small home access point is the perfect device for homes
or small offices where all you need is a wireless AP and a few
wired devices connected. Based on our popular
RB951-2n, the new hAP is an improvement in many areas.
The device can be powered from the power jack or with passive
PoE from a PoE injector. The power adapter is included.
The hAP is preconfigured, so all you need to do, is plug in
the internet cable, the power, and start using the internet by
connecting to the MikroTik network.
hAP
View product online
$21.95
$45
12V 1A power adapter View product online
$59.95
CHR and network simulation instructions
Virtual lab setup example with GNS3
http://forum.mikrotik.com/viewtopic.php?f=2&t=99658
View product online

DynaDish 5
quickMOUNT PRO
The DynaDish 5 is a new 802.11ac outdoor device with an integrated antenna. Compact
in it’s design, it is a simple and completely integrated product with everything you need
to quickly install a reliable point to point link.
The DynaDish 5 is powered by a new 720MHz CPU from Qualcomm.
The quickMOUNT pro is a advanced wall mount adapter for small point to point and sector
antennas. You can mount it on the wall or use it as an adapter from large diameter pole to
small size antenna mounting clip ensuring reliable fitment.
The quickMOUNT pro gives the possibility to turn antenna within 140° both in a horizontal
and vertical plane. With the quickMOUNT pro it is possible to perfectly set antenna alignment
using integrated graduated scale.
You can use the quickMOUNT pro with any pole mountable device or Mikrotiks small
mounting clip with weight less than 1.5 kg.
• It’s simple and low cost.
• Supports SXT, Omnitik, BaseBox or any other pole mountable device.
The adapter is very durable due to it’s special plastic material composite - anvilNITE (TM).
New 802.11ac outdoor device
• ideal for long distance point-to-point links
• 5GHz dual chain board integrated into 25dBi dish antenna with 8 degree beam width
• 720Mhz CPU 300MHz DDR2
• one Gigabit Ethernet port
The antenna is a 8 degree 25dBi dish, and it includes a precise
alignment mount, ideal for long range point to point wireless links.
24V 0.8A Power
adapter
Precision mount U kit Gigabit PoE injector
View product online
$179
Product code QMP
Dimensions 95x88x112mm
Tube diameter 35 mm
Max tube diameter to which mount can be
attached
65 mm
Maximum antenna weight 1.5 kg
Maximum wind load 100 N
Turn angle for Mikrotik products 140°
Compatible devices
SXT series, Omnitik, 3rd party antennas that are designed to be
pole mounted
Material anvilNITE™
$9.50

Recent MUMs
MUM Ecuador 2015
MUM Colombia 2015
We had two great events in South America recently, the MUM in Ecuador gathered 600 participants and MUM Colombia had 400.
You can watch the recordings of the presentations on our Youtube channel.
Go to Image Gallery
Go to Image Gallery
Watch presentations on Youtube
Watch presentations on Youtube
Upcoming MUM events
India in New Delhi
August 28
Turkey in Istanbul
October 6
Thailand in Bangkok
August 31
Indonesia in Yogyakarta
October 9 - 10
Kyrgizstan in Bishkek
September 22
Brazil in Florianopolis
November 5 - 6
Russia in Moscow
September 24
Myanmar in Yangon
October 1
Japan in Tokyo
September 27
Argentina in Buenos Aires
November 9 - 10

NEWSLETTER, ISSUE #66 - JULY 2015 1
NEWSLETTER, ISSUE #66 - JULY 2015
• RBGPOE-CON-HP
• PowerBox updated
• RB850Gx2 with Hardware Encryption Acceleration
• Upcoming MUMs
• SXT HG5 ac
• QRT 5 ac
• CRS112-8G-4S-IN
• quickMOUNT
• New SFP modules
SXT HG5 ac
QRT 5 ac
CRS112-8G-4S-IN
Introducing the new High Gain version of our popular SXT G 802.11ac
model, equipped with an improved 5GHz 17dBi 24 degree antenna, Gigabit
Ethernet port and RouterOS L4 license. Like all our SXT units, this is a neat
and compact outdoor device that comes with all necessary accessories
included. Use it as a wireless AP, for point to point, or as a CPE unit.
New QRT 5 ac unit brings together advantages of 802.11ac technology and
our popular High Gain 24dBi QRT 5GHz antenna. Unit is equipped with
RouterOS L4 license, that makes it ideal for Long-Distance AP, Backbone or
CPE.
Cloud Router Switch 112-8G-4S-IN is new addition to our CRS product line. It’s equipped with eight Gigabit Ethernet ports,
four SFP cages and desktop case. Product supports 10-57V and comes with 24v 0.8A power supply.
Gigabit
PoE injector
24V 0.8A
power adapter
Metal ring Pole mounting
bracket
$119
$199
$139
Gigabit
PoE injector
24V 0.8A
power adapter
QRT antenna
mount
U mast clampU bolts K-QRT screw kit

quickMOUNT New SFP modules
RBGPOE-CON-HP
PowerBox updated
We are glad to introduce quickMOUNT - a basic wall mount
adapter for small point to point and sector antennas.
You can mount it on the wall or use it as an adapter from
large diameter pole to small size antenna mounting clip
ensuring reliable fitment. The quickMOUNT gives possibility
to turn antenna within 190°. With the quickMOUNT it is
possible to simultaneously mount two SXTs, thus creating a
repeater access point or creating large sector coverage.
You can use the quickMOUNT with any pole mountable
device with weight less than 1.5 Kg.
We are adding bidirectional SFP+ 10G modules to our
portfolio. Kit (product code S+2332LC10D) contains
two SFP+ modules that can be used as pair to achieve
operating data rate up to 10.3Gbps for distances up to
10km on single optical cable.
We are glad to introduce our new 48 to 24V Gigabit
PoE Converter (product code RBGPOE-CON-HP),
that replaces our previous model RBPOE-CON-HP.
In comparison with the previous model, RBGPOE-
CON-HP supports 10/100/1000Mbps instead of only
10/100Mbps.
PowerBox units are now shipped with a new, faster
QCA9531 650MHz CPU. New product code is
RB750P-PBr2.
$5.50
$349
$24.95
$69
Metal ring K-41 screw kit
IEC cord DIN mount
(K-27)
24V 2.5A power
adapter
PoE injectorMetal ring Plastic zip tie

RB850Gx2 with Hardware Encryption Acceleration
Upcoming MUM events in 2015
The RB850Gx2 devices are now shipped with a CPU that features Hardware Encryption Acceleration (serial numbers that
start with “5”). Combined with up to date RouterOS version (6.28 or above), you will now be able to reach 500Mbps with
AES128 encryption on this device.
$129
India in New Delhi
August 28
Turkey in Istanbul
October 6
Thailand in Bangkok
August 31
Indonesia in Yogyakarta
October 9 - 10
Ecuador in Guayaquil
August 7
Kyrgizstan in Bishkek
September 22
Brazil in Florianopolis
November 5 - 6
Colombia in Bogota
August 11
Russia in Moscow
September 24
Myanmar in Yangon
October 1
Japan in Tokyo
September 27
Argentina in Buenos Aires
November 9 - 10

NEWSLETTER, ISSUE #65 - JUNE 2015 1
NEWSLETTER, ISSUE #65 - JUNE 2015
• WPS button
• FastTrack
• hEX lite
• RoMON
• EoIP
hEX lite (RB750r2)
WPS button
The familiar and popular RB750 just got a whole lot better, bringing improved design, more RAM,
faster CPU and better throughput at the same affordable price and a new name - hEX lite!
Its price is lower than the RouterOS license alone - there simply is no choice when it comes to
managing your wired home network, the hEX lite has it all.
Not only it’s affordable, small, good looking and easy to use - It’s probably the most affordable
MPLS capable router on the market! Combined with our latest RouterOS version it will provide
unprecedented 850MHz CPU with ability to overclock it up to 1GHz. No more compromise between
price and features - hEX lite has both. With its compact design and clean looks, it will fit perfectly into
any SOHO environment.
Box contains: hEX lite in a plastic case and power supply.
Starting from RouterOS v6.25 you can now use WPS (WiFi protected setup) in your RouterBOARD
device for convenient guest access. The next time your guests attempt to connect to your AP, just ask
them to select the WPS option, and click “WPS accept” in Quickset, or push the Reset button on the
device.
Since RouterOS only supports the WPS “button mode”, this is a secure and simple way to allow any
wireless device to connect, without the need to type anything. Just push the button and the client will
be granted access.
WPS is supported by most operating
systems, including Android on your
phone. The wireless-cm2 package
is required for the WPS mode
functionality.
View product online
12V 0.5A
power adapter
$39.95

RoMON
EoIP 15th anniversary and a new encryption feature
RoMON, or Router Management Overlay Network, is a new feature that we have added to RouterOS v6.xx. This feature
allows to discover devices over multiple hops, similar to how MikroTik Neighbor Discovery works.
The RoMON network operates independent from L2 or L3 forwarding configuration, so you can discover what RouterOS
devices are located inside networks that previously were not
directly accessible. By enabling RoMON on all your RouterOS
devices, you can manage devices no matter what the routing
configuration is in your network.
You can not only discover these devices, you can also ping them,
SSH to them, and connect to them with Winbox - without the
need for tunnels, NAT or special routing rules.
RoMON uses a MikroTik Proprietary protocol and supports only
Wireless and Ethernet like interfaces.
RoMON enabled devices establishes a independent MAC layer
peer discovery and data forwarding protocol. Communication
is based on the RoMON ID which is taken from the first MAC
address of the board, this ID can also be changed. For security, a
special “secret” can be set.
To start discovering RouterOS devices beyond your network,
simply enable RoMON in all RouterOS devices - this is done in
the “tool romon” menu. Then, use Winbox v3 to connect to your nearest RoMON router and start discovering.
Read more: http://wiki.mikrotik.com/wiki/Manual:RoMON
One of the most popular protocols made by Mikrotik - EoIP (Ethernet over IP) was created by Mikrotik fifteen years ago this
year. First publicly released in September 2000 with RouterOS v2.1 beta, this protocol was created to simplify bridging of
Ethernet networks and connecting remote locations into a single network, by creating a tunnel on top of an IP connection.
When the bridging function of the router is enabled, all Ethernet frames (all Ethernet protocols) will be bridged just as if
there were a physical Ethernet interface and cable between the two routers (with bridging enabled). This protocol makes
multiple network schemes possible.
The EoIP protocol encapsulates Ethernet frames in GRE (IP protocol number 47) packets (just like PPTP) and sends them
to the remote side of the EoIP tunnel.
The first EoIP documentation page was created a little later in January, 2000. EoIP is still very popular today, and is
supported by all RouterBOARD devices by default.
To celebrate the 15th anniversary of EoIP, Mikrotik is adding keyphrase encryption support. Simply add a keyphrase to
the configuration of each EoIP interface and all traffic over the tunnel will be encrypted using IPsec. With the addition of
encryption, the protocol is still simple, robust, and easy to use.
Links and history EoIP type protocols
Current Mikrotik wiki page about EoIP
http://wiki.mikrotik.com/wiki/Manual:Interface/EoIP
A Linux version of this protocol
https://code.google.com/p/linux-eoip/
Discussion on a list about a kind of Ethernet over IP made by
Xerox in the early 1990s (XET -- Xerox Ethernet Tunnel)
http://marc.info/?l=linux-netdev&m=110605301018013&w=2
An RFC about a similar protocol made two years
after Mikrotik released EoIP.
https://tools.ietf.org/html/rfc3378

FastTrack -- Up to 890Mb/s NAT on RB2011 WAN
New fasttrack feature supports single stream tcp up to 900Mb/s NAT/mangle on WAN port
FastTrack is implemented as a new action for
firewall filter/mangle - “fasttrack-connection”. This
provides the flexibility necessary for users to combine
any existing firewall implementation with the new
FastTrack feature.
The “action=fasttrack-connection” works similar to
“action=mark-connection” - it flags connection tracking entries so that
following packets from these entries can be “FastTracked”.
In current implementation FastTrack can work with IPv4/TCP and
IPv4/UDP connection tracking entries.
Even in the “FastTracked” connections some packets will still go the
regular path to maintain connection tracking table integrity (to refresh
timeouts, update connection states and more), but as you can see
in the picture on the right - it is only a few percent of total number of
packets
Real-life example
Board: RB2011UiAS-2HnD
Configuration: factory default (Home AP mode in QuickSet with firewall and masquerade)
Traffic: With any TCP/UDP traffic (test below performed with single TCP stream)
Before FastTrack
• 360Mbps throughput and CPU @100%
• 44% of CPU time was taken by firewall
After FastTrack
• 890Mbps throughput and CPU @86%
• 6% of CPU time was taken by firewall
In this example FastTrack allows us to use all firewall features, but at ~1/20 of CPU resource cost, leaving you with free
CPU resources to get more throughput or use elsewhere in configuration.
We do plan to add FastTrack to factory-default configuration for devices that come with NAT and firewall.
Connection Tracking support
View online

NEWSLETTER, ISSUE #64 - FEBRUARY 2015 1
NEWSLETTER, ISSUE #64 - FEBRUARY 2015
• CCR1009 passive cooling
• Protected RouterBOOT
• European MUM
• hAP lite
• PoE out features
• PowerBOX
• Quickmount
hAP lite
PoE out features
The home Access Point lite (hAP lite) is an ideal little device for your apartment, house or office.
It supports button triggered WPS, for the convenience of not typing a complicated password when
somebody wants to have wireless internet access, and can also be told to change to cAP mode and
join a CAPsMAN centrally managed network by the push of a button.
Of course, the device runs RouterOS with all the features,
bandwidth shaping, firewall, user access control
and many others.
The hAP lite is equipped with a powerful 650MHz CPU,
32MB RAM, dual chain 2.4GHz onboard wireless,
four Fast Ethernet ports and
a RouterOS L4 license.
USB power supply is included.
$21.95View product online
Open documentation
USB style 5V 0.7A
power adapter
Many new RouterBOARD devices are equipped
with PoE out support on at least one of the
Ethernet ports. This is indicaded by the “i” letter
in the product name, for example “RB2011Ui”
has PoE out on the last port.
This feature is for providing power to another
RouterBOARD. For example, you can power
a SXT device that is used to connect to your
ISP wirelessly. If for some reason you need
to power cycle the device, RouterOS offers
some new features, like power monitoring and
power cycle for any number of seconds. This
is to avoid you being disconnected, if you are
connected over the PoE out port.
To read more about the PoE out feature, visit
our documentation.

PowerBOX
QuickMount (price coming soon)
The PowerBOX is an outdoor five Ethernet port router with PoE output
on four ports. You can use this device to supply power to four PoE
capable devices such as our SXT or others. Since the device has
a waterproof outdoor case, you can mount it on a tower, or in other
outdoor locations, the PowerBOX is pole-mountable with the included
metal ring or mounting loops.
The unit has five shielded Ethernet ports, four of which can power other
PoE capable devices with the same voltage as applied to the unit (max
current out is 1A per port, max total out is 2A).
Less power adapters and cables to worry about!
quickMOUNT is a basic wall mount for small point to point and
sector antennas.
It can be mounted on the wall or can be used as an adapter
from a large diameter pole to a small size antenna mounting
clip, ensuring reliable fitting. quickMOUNT gives possibility to
turn antenna within a 190° arc.
You can use it to simultaneously mount two SXTs, creating a
repeater access point or creating large sector coverage.
You can also use the quickMount to mount any other pole
mountable MikroTik (or third party) antenna with a weight of less
than 1.5kg.
IEC CordPOE injector Metal ring24V 2.5A power adapter Mounting loopDIN mount
$69
View product online
The adapter is very durable due to it’s special
material composite - anvilNITE (TM)

CCR1009-8G-1S-1S+PC
Our popular 9-core Cloud Core Router is now available in a new passive cooling enclosure.
This CCR1009 unit is equipped with two heat-pipes and a specially designed heat-sink, so its completely silent.
The unit is powered by an external 24v 2.5A AC/DC adapter and supports power redundancy if you also power
it from the PoE input port.
The device comes with a desktop enclosure, but special rackmount brackets are also included, so it can be
used either on desk or in rack.
$495
View product online
Rackmount ears USB OTG cable IEC Cord 24V 2.5A power adapter
Protected RouterBOOT
Starting from RouterOS v6.26, we are now offering a new feature for securing your RouterBOARD device.
What this feature does is it disables the reset button and jumper on your RouterBOARD, and also turns off the
console access, so the booting mode can no longer be changed to Ethernet, or run Netinstall.
The only way you will be able to change routerboot configuration is through RouterOS. If you forget the
password, complete reformat of the NAND and RAM will be required, initiated by a special procedure. This is to
ensure that even if somebody gains physical addess to your device, he can’t access the device by serial cable
or by changing boot mode with the button.
To read more about this new feature, visit our documentation:
http://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected_bootloader

European MUM (March 27-28)
Can you believe that this spring we will have the 10th Anniversary of the MikroTik User Meeting Europe? To
celebrate our 10th Grand European MUM, we are returning to the location of the first MikroTik User Meeting - to
Prague, Czech Republic!
The MUM will take place on March 27-28
(Friday - Saturday).
• largest WISP conference in Europe
• more than 1,200 participants from 70 countries
• more than 50 Exhibitors
• new REVOLUTIONARY product announcements
• two days of workshops and presentations
• FREE hardware gifts from MikroTik and Exhibitors
• raffle at the end of MUM with great prizes
• meet n’ greet on March 26 from 6PM with
FREE beer, wine and soft drinks
Also this year we have announced several regional MUM events:
Hanoi, Vietnam - April 17 Phnom Penh, Cambodia - April 21 Miami, FL, USA - April 23 - 24
Melbourne, Australia - May 15 Wellington, New Zealand - May 18
Register NOW!

NEWSLETTER, ISSUE #63 - JANUARY 2015 1
NEWSLETTER, ISSUE #63 - JANUARY 2015
• MUM Indonesia
• CRS210-8G-2S+IN
• CRS212-1G-10S-1S+IN
• CCR1072 testing
MUM in Indonesia 2014 - nearly 2000 participants!
We have concluded the year 2014 with a giant conference
in Yogyakarta, Indonesia - nearly 2000 participants attended
this MikroTik User Meeting, the largest MUM ever!
• Presentation videos
• Presentation slides
• MUM photo gallery
We are happy to have met all of you, we have heard your
suggestions and feature requests and in year 2015 we will
be working hard to make as much of them possible as we
can.
We will continue to make MikroTik User Meetings around
the world this year, so if you didn’t make it to Indonesia —
don’t worry, we might be coming to your country next!
See you in the MUM

Winbox 3 release candidate
Due to popular demand we are introducing a big
upgrade to our GUI configuration method - Winbox. The
new version includes some long requested features
and even new ones.
The new Winbox can now remember all of your settings
and layouts in each router, or use your favorite layout
for other routers too - you only need to see Firewall
Filter with a specific set of columns? No problem, save
this session and then use it whenever connecting to
any router.
Another great feature is the ability to group saved
routers into groups by location or list (as you prefer). You can also sort them by address, username,
session, group, note and even model name. If your list is huge - search and filter are also available.
And what would such management possibilities be without ability to have this on multiple computers?
This file is easily transferable and can even be used in Dropbox, so you can have synchronized router
lists in all your computers.
We have also added a global “inline comments” setting, so that all rule lists can have the comments
inside it’s own column, not under each rule. This also makes it possible to sort by comment. And of
course, this setting is remembered between sessions.
Winbox 3 is also very secure. To protect your router list, you can set up a “Master password” which will
encrypt the winbox database file.
• Remembers all layout details between
sessions
• Inline comments global setting
• Winbox loader can self upgrade
• Choose any of the saved sessions
when connecting to a router
• Group, filter and sort saved routers
• Set up master password to encrypt
router database
• Move database to Dropbox or copy to a
different PC
• Import or export database to Winbox 2
format
• Select multiple routers from the saved
list, and “Connect to all”
Download Winbox 3 RC here:
http://download2.mikrotik.com/routeros/
winbox/3.0rc1/winbox.exe

CRS210-8G-2S+IN
CRS212-1G-10S-1S+IN
It comes with eight Gigabit Ethernet ports and two SFP+ cages for 10G connectivity (first port supports
1.25G/10G modules, second port only 10G modules). Product supports 10-57V DC.
Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the
familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you
want, ports can be removed from the switch configuration, and used for routing purposes.
It comes with one Gigabit Ethernet RJ45 port, ten SFP cages and one 10G SFP+ cage, as well as LCD panel
and serial port (RJ45). Product includes indoor desktop case and power supply.
Our CRS series combines the best features of a fully functional router and a Layer 3 switch, is powered by the
familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you
want, ports can be removed from the switch configuration, and used for routing purposes.
$229
View product online
View product online
24V 0.8A power
adapter
Rackmount ears
24V 1.2A power
adapter
$219

CCR1072 undergoing final testing procedures
Our fastest Cloud Core Router ever is undergoing the final testing stages before going to mass production. The
new CCR1072 uses a state of the art Tilera CPU with 72 CPU cores, together with 16GB of RAM it will provide
throughput and processing power, never before possible. The device features eight SFP+ 10Gbit capable ports,
a copper Ethernet port, a console port, a smart card slot and for the first time - hot swap power supplies.
The new device will be available soon, so keep following our newsletters and our website www.routerboard.com

NEWSLETTER, ISSUE #62 - OCTOBER 2014 1
NEWSLETTER, ISSUE #62 - OCTOBER 2014
• FTC
• RB911G-5HPacD
• MUM
• cAP 2n
• RB850Gx2
• Radome for mANT
Introducing our first MikroTik Ceiling AP- cAP 2n!
RouterBOARD cAP-2n (ceiling Access Point) is our first 2.4GHz ceiling AP. Inconspicuously designed, it blends
into the environment, perfect for hospitality business like hotels, airports, shopping malls etc.
cAP-2n supports 802.11b/g/n and can be powered by PoE. It’s a perfect companion for the MikroTik CAPsMAN
(controlled AP system manager), allowing you to control all your AP devices from one central location.
Unlike traditional controller software, which requires a separate PC/Mac to run, our CAPsMAN runs on any
existing RouterBOARD device in your network. No need for a separate controller machine.
Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws
and screw anchors.
$49.95
Ceiling mount base24V 0.38A power
adapter
Ceiling mount
attachment
PoE injector
Included
• Indoor ceiling AP
• 2.4GHz
• Looks like a smoke detector
• Unobstructive and inconspicuous
• RouterOS L4 included
The CAPsMAN controller then manages
all cAP access points from a single
location - no need to connect
to each one, just one
click and all settings
are updated.
cAP usage example
View product online

RB850Gx2
Radome for mANT
FTC
RB911G-5HPacD
The RB850Gx2 is a five port Gigabit ethernet router. Comparing
to the RB450G, the RB850Gx2 is much faster, with a dual core
CPU, yet it still retains the same form factor, and will fit into the
same enclosures.
The device is powered by a 500MHz dual core P1023 PPC CPU,
and also includes a temperature sensor and voltage monitor.
The radome Cover Kit is now available for our mANT 30dBi parabolic
antennas!
It reduces wind load, protects reflector surfaces from harsh
environment, protects the antenna feed from falling objects, as well
as positively affect the antenna sustainability and operational life. It’s
made from a special material that has a low dielectric constant that
does not reduce signal gain. A wide range of temperature and direct
sunlight won’t affect it.
The FTC is a Fiber to Copper converter. Unlike many other
media converters available on market, the FTC has an outdoor
waterproof case with a lock screw for ease of installation. Unit
has 12-57V PoE with 802.3af/at support. Comes with PoE injector
and power supply.
The RouterBOARD 911G-5HPacD is our low-cost small form factor
CPE board with 802.11ac support. It’s perfect for building low-cost
802.11ac CPE devices, as the list price is only $79. Yet, the device
is very powerful - it’s equipped with 720MHz CPU, 128MB RAM,
Gigabit Ethernet port, power jack, and a 1300mW 802.11ac 5GHz
Dual Chain wireless onboard. It comes with a RouterOS L3 license.
$129
$39
$39
$79
View product online
View product online
View product online
View product online
x2 cores

MUM
Upcoming events
MikroTik is coming to visit you! We have very busy end of the year, with six MUM conferences scheduled. See
our latest products, meet MikroTik staff in person, and learn the latest in networking technology.
The MikroTik User Meeting (MUM) is a conference on MikroTik RouterOS software and RouterBoard hardware.
Listen to presentations, ask questions, talk with specialists and see interesting technology demos by MikroTik
and the users themselves - all here, at the MUM.
Register now, FREE ONLINE REGISTRATION without lunch and RouterOS license, or PAID entry that includes
T-shirt, Lunch and a RouterOS License.
This is your chance to also show YOUR experience and tell others about your company. Sign up as a Visitor,
Presenter, or for a Technology demo table space (email us). There is no minimum requirement for attending, it
doesn’t matter if you are an experienced MikroTik user, or just heard about us - people from all around the world
are coming to the MUM. See you there!
Indonesia -Yogyakarta
(December 05-06)
Belarus, Minsk
(October 29)
Bulgaria, Sofia
(November 06)
Bolivia, Santa Cruz
(November 12-13)
Brazil, Fortaleza
(November 17-18)
Philippines, Manila
(December 02)
Register here!
Register NOW at mum.mikrotik.com!
• meet’n’greet and network with FREE beverages
• RAFFLE prizes

NEWSLETTER, ISSUE #61 - AUGUST 2014
• R11e-5HacD
• RB922UAGS-5HPacD
• CRS 8 port series
• Our 802.11ac product test results
• NetMetal 5
• mANT30 series
• SXT ac series
• NetBox 5
• mAP 2n
The NetMetal 802.11ac outdoor unit combined with our
professional mANT 30dBi dish antenna is a whole new
category of professional wireless systems. Reach even
farther, at a higher speed!
netMETAL 5 and mANT30

NEWSLETTER, ISSUE #61- AUGUST 2014 2
NetMetal 5
mANT30 series
Supporting the 802.11ac wireless standard, the NetMetal allows to use radio
datarates of up to 866Mbps (for D models) and 256-QAM modulation, and
20/40/80MHz channels. With it’s huge speed improvements, 802.11ac opens
up new possibilities. NetMetal5 - high power for long links!
The NetMetal is a completely new product in a waterproof enclosure. Its
rugged design is made to withstand the toughest conditions, but at the same
time is easy to use and can be opened and closed with one hand. The solid
die cast aluminium enclosure also works as a reliable heatsink for it’s high
output power radio.
Two of the models have a miniPCI-e
slot for an additional wireless card.
All parts are included for pole mounting or mANT30
parabolic dish antenna mounting!
Two antennas are available, with a standard type mount
(MTAD-5G-30D3), and with a precision alignment mount
(MTAD-5G-30D3-PA). The antennas come packaged with all
necessary accessories and cables.
mANT30 is a professional class 5 GHz 30dBi dish antenna, made
to the highest industry standards. Built to seamlessly accomodate
our Netmetal, Netbox and Basebox series products, but can be
used for any pole mounted wireless device due to the adequate
length of the included FlexGuide cable.
24V 1.2A Adapter
DIN mount miniPCI screws
Mounting loops
Gigabit PoE
injector
Metal ring
FlexGuide
Included View product online
$149
$119
View product online

The new AC standard is here, with up to 866Mbit over the air
datarate, 256-QAM modulation and 20/40/80MHz channels.
802.11ac opens up new possibilities and speeds never possible
before.
The SXT ac is a new member in our 802.11ac product lineup,
currently two models are available — with regular 28 degree
antenna, and the SA model with a 90 wide beam-width sector
antenna. Also supports 802.11a/n mode and is compatible with
all legacy RouterBOARD devices, including Nstream and Nv2
protocols. Both devices come with Gigabit Ethernet.
• Up to 1300mW RF output
• Extended temperature range -30C to +80C
• Up to 540Mbps throughput
• Low latency Point to Point
• Supports passive PoE and 802.3af/at PoE input (15-60V)
The NetBox 5 is a dual chain outdoor AP/CPE/Point-to-Point
device with RP-SMA connectors for antennas, and a cable
hood for protection against moisture. This device supports the
new 802.11ac standard for increased wireless speed (866Mbit
datarate, and 20/40/80MHz channels).
The case can be opened with one hand, and is protected against
the elements. Ethernet and a Grounding wire exits are provided
on the bottom, behind a protective door.
Comes with a mounting loop for tower/pole mounting, and a
separate DIN rail mount is also provided. Package also includes
a PoE injector and power supply unit.
View product online
SXT ac series
NetBox 5
RBSXTG-5HPacD RBSXTG-5HPacD-SA
24V 0.8A Adapter Mounting Ring Pole mounting
bracket
PoE injector
Included
Included
DIN mountMounting loops Gigabit PoE injectorMetal ring
View product online
$109
$109

mAP 2n
The mAP is a tiny size wireless Access Point with full RouterOS capabilities. It is very portable, since it accepts
power from a wide variety of sources - USB, Passive or Active PoE (802.3af and 802.3at) and power jack.
In addition to using this device as a small and portable AP, it also works as a PoE injector - the second Ethernet
port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.
• PoE in 10-57V
• Built in 2GHz AP
• microUSB for a 3G/4G modem
(includes adapter to standard USB), or for power input
• Station or AP mode wireless
• Any type PoE input 802.3af and 802.3at
• Passive PoE output (same as input voltage)
24V 0.8A AdapterUSB Adapter
$45
The first port of the mAP is
connected to the Internet
router. The second provides
connectivity and power to a
SXT unit outside the building.
The phone is connected
to the wireless Internet
provided by the mAP.
The SXT provides Internet to the
neighbours across the street or
connects to WISP for Internet.
mAP usage example
View product online

R11e-5HacD
RB922UAGS-5HPacD
The new AC standard is here, with up to 866Mbit datarate
and 256-QAM modulation and 80MHz channels. 802.11ac
opens up new possibilities and speeds never possible
before.
R11e-5HacD is our new 802.11ac card in miniPCIe format,
perfect for any RoutrBOARD with miniPCIe slot, such
as RB953, RB912, RB922 RB800 or x86 devices with
RouterOS.
The card features built-in LED indicators for wireless mode,
connection status (connected, searching, disabled), TX and
RX activity and wireless signal strength - just looking at the
card will help with installation and alignment.
The RB922 is a very versatile wireless router, perfect for assembling your own solution. It supports the new
802.11ac standard for high speed wireless (up to 866Mbit datarate and 20/40/80MHz channels). The device
has ports and slots for many uses: 1x SFP cage, miniPCIe slot with SIM for 3G/4G modem, USB port, Gigabit
Ethernet port and two MMCX connectors for the built in 802.11ac radio.
$49
$99
View product online
View product online

CRS 8 port series
Our 802.11ac product test results
CRS109 has eight Gigabit ports and one SFP port, it also has a built in Wireless Access Point. Our CRS
series combines the best features of a fully functional router and a Layer 3 switch, is powered by the familiar
RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want,
ports can be removed from the switch configuration, and used for routing purposes
• Full wire speed switching
• Configure ports as switch, or for routing
• If required, full RouterOS routing power right there
• Built in 802.11b/g/n Wireless AP 1000mW
• Desktop case
• Color touchscreen LCD
Here is a video from our SXT ac test, which we performed in our anechoic wireless test chamber, to rule out all
outside influence factors. This shows the capabilities of the 802.11ac technology in the SXT units. The test was
done on default configuration, with 80MHz ac channels, on a distance of 5 meters. Since the signal was too
strong, the result could even be slightly better at bigger distances.
microUSB cable24V 0.8A Adapter
$149
View product online

• 802.11ac
• Winbox 3
• New Design site
• Home VPN

HomeVPN
Starting from RouterOS v6.16 you can easily enable a VPN
server for your HomeAP device in the QuickSet page in
Webfig. Access your local network or use your router as a
secure gateway for Internet access. PPTP or IPsec will be used,
depending on the client config. Some of the benefits
are outlined below.
Mobile device configuration example
Private Surfing
Protect your constitutional rights to privacy,
don’t get tracked and logged by your
workplace or hotspots
Wi-Fi security
HomeVPN encrypts all traffic that goes
over wireless even if the AP is not set to do
encryption
Malware protection
With HomeVPN, no man-in-the-middle-attack
will take control of your device
Bypass Internet Censorship
HomeVPN lets you go where you want to go,
Unblock YouTube, unblock Facebook, unblock
Twitter
Secure browsing
Honeypot open APs can not snoop your
passwords and identity when using HomeVPN
Freedom to travel
Now you can access of the region restricted
media when traveling abroad (music, movie, TV,
sports websites)
Works with
Mac OS X
(all versions)
iOS (iPhone/Ipad)
Android (all versions) Windows (all versions)
Limited Internet
access with a lot
of restrictions
Company or
Government’s
firewall
Your router with
HomeVPN server
Unlimited Internet
access
The new QuikSet VPN menu is truly simple - just copy the “VPN access” address and
paste into your computer or phone VPN settings
Limited Internet
access
Secure VPN access

DESIGNS.MIKROTIK.COM
We have created a new webpage where you can
download files for making your own T-shirts with
MikroTik logo, slogans, product images and more. We will
be updating the site with new designs all the time.
This allows to choose your own shirt material and color,
without big shipping charges — simply download the
artwork and order a shirt locally, in any screen printing
shop.
In another section you will be able to download MikroTik
themed wallapers for your computer screen.
And for all other purposes, a third section is devoted to
the MikroTik and RouterBOARD logo. This will allow you
to create your own flyers, brochures, pens, advertising
materials and more.
Winbox 3
We have released a new Winbox version with many long
requested features. Currently the new Winbox is still in
Beta, but it works very well, and can be used alongside
the old Winbox, without disturbing the operation of the
router, or the old Winbox. You can download it on the
mikrotik.com download page
Some of the highlights in Winbox 3:
• Group saved routers and keep big lists of them
• Sort by IP address, MAC, version etc.
• Filter and search in Saved or Neighbors
• Ability to keep Loader open when connecting
• Winbox can now self-upgrade
• If connection is lost, it will offer to reconnect later
• Log can be sorted, and now has columns
Reconnect is now possible
Main loader windowSortable Log

MikroTik newsletters from #60 to #67

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Destaque

Destaque (18)

Semelhante a MikroTik newsletters from #60 to #67

Semelhante a MikroTik newsletters from #60 to #67 (20)

Último

Último (20)

MikroTik newsletters from #60 to #67