Maker Education can help kids to enjoy learning Science, Technology, Engineering and Maths (STEM). We at Fun2Do Labs - Open Education Project have published this presentation so that teachers can help their students to learn basics of science using project based activities. In this presentation we teach how you how to make a toy car.

1. Making Education OPEN and FUN!
Building a Toy Car
Fun Do Labs
TM
2
fun2dolabs.org

2. Requirements - 1
Cell 9vChasis Tyres
Fun Do Labs2

3. Cell 9v
Geared Motor Dummy WheelSwitch
Fun Do Labs2
Requirements - 2

4. Chasis
Chasis is a frame which is used to connect the internal parts
like motor, tyres etc.
Fun Do Labs2

5. Tyres
Tyres are used for moving the car
Fun Do Labs2

6. Battery
Battery is used to power the circuit
Fun Do Labs2

7. Switch
Switch is used for making and breaking flow of current in circuits
Fun Do Labs2

8. Geared Motor
Geared motor is used for moving the tyres
Fun Do Labs2

9. Dummy Motor
Dummy motor can be attached to tyres
Fun Do Labs2

10. Fun Do Labs2
Step - 1
Attach dummy motors in chasis

11. Step - 2
Attach geared motors in chasis
Fun Do Labs2

12. Step - 3
Insert screw in geared motor hole
Fun Do Labs2

13. Step - 4
Tighten the screws with nuts
Fun Do Labs2

14. Step - 5
Attach tyres to shafts of geared motors
Fun Do Labs2

15. Step - 6
Attach tyres to shafts of dummy motors
Fun Do Labs2

16. Step - 7
Fix battery & switch using double tape or some adhesive
Fun Do Labs2

17. Step - 8
Attach left motor grey wire with right motor white wire
Attach left motor white wire with right motor grey wire
(Refer to connection diagram)
Fun Do Labs2

18. Step - 9
Attach one of the switch wire to any wire of the motor
(Refer to connection diagram)
Fun Do Labs2

19. Step - 10
Switch on/off to control the car
Fun Do Labs2

20. Battery
-+
Switch
Motor1Motor2
Connection Diagram

21. saurabh@fun2dolabs.org
@skjsaurabh | @fun2dolabs
Fun Do Labs
TM
2
fun2dolabs.org