Lepuufu

1 Seguidor

tool wear machinability machining design of steels for high speed machining high hardening and volume fraction of inclusions.5 free cutting steels coating inclusion engineering diffusional wear cermet tool carbide tool turning belag free-machining steel tool geometry free machining steels simulation tellurium addition steel drilling microalloyed steel automotive industry minimum quantity lubrication (mql) aço para molde desoxidação por cálcio. usinabilidade hard cutting quality of work cutting tool chip removal machine alumina x-ray diffraction stainless steel surface residual stress turning tool wear surface roughness coconut oil

Ver mais

Apresentações
Documentos
Infográficos

Mais recentes Mais populares

Computer aided simulation and experimental studies of chip flow and tool wear in the turning of low alloy steels by cemented carbide tools

Há 7 anos • 230 Visualizações

Tool wear and inclusion behaviour during turning of a calcium treated quenched and tempered steel using coated cemented carbide tools

Há 7 anos • 233 Visualizações

The formation of a protective oxide layer in machining resulphurized free cutting steels and cast irons

Há 7 anos • 257 Visualizações

Properties of calcium treated plastic mould steels

Há 7 anos • 153 Visualizações

Parte 1 relatório do comportamentode usinagem em brocas helicoidais de aço rápido na usinagem dos materiais aço inox 304e 304 usifac

Há 7 anos • 51 Visualizações

Parte 2 relatório do comportamentode usinagem em brocas helicoidais de aço rápido na usinagem dos materiais aço inox 304e 304 usifac

Há 7 anos • 66 Visualizações

Lepuufu

Chip flow and notch wear mechanisms during the machining of high austenitic stainless steeis

Analytical prediction of flank wear of carbide tools in turning plain carbon steels (part 1)

An investigation of adhering layer formation during tool wear progression in turning of free cutting stainless steel

Wear performance of ceramic cutting tool materials when cutting steel

Computer aided simulation and experimental studies of chip flow and tool wear in the turning of low alloy steels by cemented carbide tools

Tool wear and inclusion behaviour during turning of a calcium treated quenched and tempered steel using coated cemented carbide tools

The formation of a protective oxide layer in machining resulphurized free cutting steels and cast irons

Properties of calcium treated plastic mould steels

Parte 1 relatório do comportamentode usinagem em brocas helicoidais de aço rápido na usinagem dos materiais aço inox 304e 304 usifac

Parte 2 relatório do comportamentode usinagem em brocas helicoidais de aço rápido na usinagem dos materiais aço inox 304e 304 usifac

The behaviour of materials in machining the influence of small tellurium additions on the microstructure and machining

Relation of microstructure to the machinability of wrought steels and cast irons

Specific reduction of toxic side effectsof adriamycin by induction of metallothionein in mice

Inclusion modification of steels the theory

High performance turning steel

Effect of machining on high strength low-alloy steels

Bismuth alloyed steels with improved machinability

About bismuth in incut 200 a new series of free-machining steels

Design of steels for high speed machining

Influence of tellurium addition on drilling of microalloyed steel (din 38mns6)