Parte 1 relatório do comportamentode usinagem em brocas helicoidais de aço rápido na usinagem dos materiais aço inox 304e 304 usifac

•

0 gostou•51 visualizações

Ciências

Mais conteúdo relacionado

Mais de Lepuufu

Chip flow and notch wear mechanisms during the machining of high austenitic s...

Lepuufu

Analytical prediction of flank wear of carbide tools in turning plain carbon ...

Lepuufu

An investigation of adhering layer formation during tool wear progression in ...

Lepuufu

Wear performance of ceramic cutting tool materials when cutting steel

Lepuufu

Computer aided simulation and experimental studies of chip flow and tool wear...

Lepuufu

Tool wear and inclusion behaviour during turning of a calcium treated quenc...

Lepuufu

The formation of a protective oxide layer in machining resulphurized free cut...

Lepuufu

Properties of calcium treated plastic mould steels

Lepuufu

Machining characteristics of microalloyed forging steels

Lepuufu

Parte 2 relatório do comportamentode usinagem em brocas helicoidais de aço rá...

Lepuufu

The behaviour of materials in machining the influence of small tellurium ad...

Lepuufu

Relation of microstructure to the machinability of wrought steels and cast irons

Lepuufu

Specific reduction of toxic side effectsof adriamycin by induction of metallo...

Lepuufu

Inclusion modification of steels the theory

Lepuufu

Improvement of chipdisposability of ferritic steels by containing martensitic...

Lepuufu

High performance turning steel

Lepuufu

Effect of machining on high strength low-alloy steels

Lepuufu

Bismuth alloyed steels with improved machinability

Lepuufu

About bismuth in incut 200 a new series of free-machining steels

Lepuufu

Historical analysis of metal cutting shows that metal removal rates have been increasing in the course of the century, predicated by the advancement in tool materials but the steel design has lagged behind. This paper examines the mechanisms of chip formation and tool wear as a function of cutting speed in metal cutting. Chemical wear is identified as the dominant mechanism of tool wear at high cutting speeds caused by temperature rise due to shear localisation in the primary and secondary shear zones of chip. Shear localisation in the primary shear zone is shown to be influenced by both microstructural parameters, i.e. matrix hardening and second phase particles, and metal cutting variables, i.e. cutting speed (strain rate) and feed (pressure).

Design of steels for high speed machining

Lepuufu

Mais de Lepuufu (20)

Chip flow and notch wear mechanisms during the machining of high austenitic s...

Analytical prediction of flank wear of carbide tools in turning plain carbon ...

An investigation of adhering layer formation during tool wear progression in ...

Wear performance of ceramic cutting tool materials when cutting steel

Computer aided simulation and experimental studies of chip flow and tool wear...

Tool wear and inclusion behaviour during turning of a calcium treated quenc...

The formation of a protective oxide layer in machining resulphurized free cut...

Properties of calcium treated plastic mould steels

Machining characteristics of microalloyed forging steels

Parte 2 relatório do comportamentode usinagem em brocas helicoidais de aço rá...

The behaviour of materials in machining the influence of small tellurium ad...

Relation of microstructure to the machinability of wrought steels and cast irons

Specific reduction of toxic side effectsof adriamycin by induction of metallo...

Inclusion modification of steels the theory

Improvement of chipdisposability of ferritic steels by containing martensitic...

High performance turning steel

Effect of machining on high strength low-alloy steels

Bismuth alloyed steels with improved machinability

About bismuth in incut 200 a new series of free-machining steels

Design of steels for high speed machining

Parte 1 relatório do comportamentode usinagem em brocas helicoidais de aço rápido na usinagem dos materiais aço inox 304e 304 usifac

Recomendados

Recomendados

Mais conteúdo relacionado

Mais de Lepuufu

Mais de Lepuufu (20)