Mais conteúdo relacionado
Semelhante a Umbilicals Design with UmbiliCAD and Helica (20)
Mais de João Henrique Volpini Mattos (20)
Umbilicals Design with UmbiliCAD and Helica
- 1. Umbilical Design Using UmbiliCAD and Helica
Fan Joe Zhang
Sesam Business Development Manager – DNV Software / Houston
Agosto de 2012
- 2. Introduction to UmbiliCAD
UmbiliCAD® by UltraDeep
- A cross-section design, drawing and modeling tool
- Drawing contains all material properties
- Calculates mass, weights, axial, bending and torsion stiffness
- Stress capacity calculation
- Analythical methodolgy for stiffness and stress capacity calculation
- Tube sizing according to DNV-OS-F101 and ISO 13628-5
- Module for reel capacity calculation
- Module for bill of material
- DXF export to other CAD tools
- Module for Helica calculations
- Plugin capability
© Det Norske Veritas Ltda. Todos os direitos reservados. 2
- 3. UmbiliCAD
Power cable/umbilical Steel tube umbilical Control umbilical
© Det Norske Veritas Ltda. Todos os direitos reservados. 3
- 4. Why UmbiliCAD?
No need to be an advanced draftsman
Early cross section analysis – first results within hours in stead of days
- Linear analysis with no stick/slip
Capacity Curve
1200
100% Utilisation
1100 80% Utilisation
1000
900
800
Tension [kN]
700
600
500
400
300
200
100
0.0
0.0 0.04 0.08 0.12 0.16 0.2 0.24 0.28
Curvature [1/m]
© Det Norske Veritas Ltda. Todos os direitos reservados. 4
- 5. Introduction to Helica
Helica™ by DNV
- A cross-section stress analysis tool
- Short-term fatigue analysis
- Long-term fatigue analysis
- a tailor-made software for cross-sectional analysis of flexible pipes and umbilicals
- Load-sharing between elements considering axis-symmetric analysis
- Calculation of cross-sectional stiffness properties (axial, torsion and bending
stiffness)
- Helix element bending performance analysis to describe stresses in helix elements
during bending considering stick/slip behaviour due to interlayer frictional forces.
© Det Norske Veritas Ltda. Todos os direitos reservados. 5
- 6. Helica
Cross-sectional load sharing analysis
- Load-sharing between elements considering axis-symmetric analysis
- Calculation of cross-sectional stiffness properties (axial, torsional and bending
stiffness)
- Helix element bending performance analysis to describe stresses in helix elements
during bending considering stick/slip behaviour due to interlayer frictional forces
Short-term fatigue analysis
- To assess the fatigue damage in a stationary short-term environmental condition
considering fatigue loading in terms of time-series of simultaneous bi-axial
curvature and effective tension produced by global dynamic response analysis
- Helica uses results from DeepC as the response database for time domain global
dynamic analysis as loading
Long-term fatigue analysis
- To assess the long-term fatigue damage by accumulation of all short-term
conditions
© Det Norske Veritas Ltda. Todos os direitos reservados. 6
- 7. Helica
Cross-sectional bending characteristics
- Relative motion between layers/components
- Friction, stick/slip behaviour (Tension dependent)
- Moment/curvature hysteresis
- Non-linear amplitude dependent
- Above effects automatically accounted for
Moment
Curvature
© Det Norske Veritas Ltda. Todos os direitos reservados. 7
- 8. UmbiliCAD and Helica Bundle
UmbiliCAD and Helica is a bundeled software UmbiliCAD exports cross
section geometry and material properties to Helica, set up load cases, and
build the model
for analysis.
Helica can be run from UmbiliCAD and results and plots can be presented in
UmbiliCAD
The Helica model can also be exported and run manually in Helica for batch
processing.
© Det Norske Veritas Ltda. Todos os direitos reservados. 8
- 9. Demo Case
Umbilical Component and
Cross-section Design
© Det Norske Veritas Ltda. Todos os direitos reservados. 9
- 10. Cross-section
Parameter Valu e Un it
Ou ter Diameter 1 4 3 .1 [mm]
Mass Emp ty 3 0 .8 [k g /m]
Mass Filled 3 2 .6 [k g /m]
Mass Filled An d Flo o d ed 3 5 .2 [k g /m]
Su b merg ed Weig h t Emp ty 1 4 .3 [k g f/m]
Su b merg ed Weig h t Filled 1 6 .1 [k g f/m]
Su b merg ed Weig h t Filled An d Flo o d ed 1 8 .7 [k g f/m]
Sp ecific Weig h t Ratio 2 .1 [-]
Su b m. Weig h t. Dia. Ratio 1 3 0 .8 [k g f/m^2 ]
Ax ial Stiffn ess 4 3 1 .5 [MN]
Ben d in g Stiffn ess 2 4 .9 [k Nm^2 ]
Ben d in g Stiffn ess (frictio n free) 1 5 .0 [k Nm^2 ]
To rsio n Stiffn ess 1 4 8 .6 [k Nm^2 ]
Ten sio n /To rsio n Facto r -0 .0 2 [d eg /m/k N]
© Det Norske Veritas Ltda. Todos os direitos reservados. 10
- 12. CLIENT
Function.list
Functional Requirements Cross-section
Component Design
Standards and Codes drawing
(UmbiliCAD)
(ISO 13628-5)
Mechanical
Cross-section Design Properties
(UmbiliCAD & Helica)
Capacity Curves
Local Analysis
(Helica)
Global Design and
Analysis
(DeepC Riflex)
Global Analysis Global Extreme Analysis Global Fatigue Analysis Global Fatigue
Report (e.g. 100 year hurricane (Full scatter diagram Analysis Report
DeepC Riflex) DeepC Riflex)
Local Fatigue Analysis Local Fatigue
(e.g. in BS, sag, hog etc. Analysis Report
Helica)
© Det Norske Veritas Ltda. Todos os direitos reservados. 12
- 14. Local Analysis
Using Helica
- Compute cross sectional properties
Parameter Valu e Un it
Ou ter Diameter 1 3 3 .2 [mm]
Mass Emp ty 3 5 .9 [k g /m]
Mass Filled 3 9 .4 [k g /m]
Mass Filled An d Flo o d ed 4 2 .4 [k g /m]
Su b merg ed Weig h t Emp ty 2 1 .6 [k g f/m]
Su b merg ed Weig h t Filled 2 5 .1 [k g f/m]
Su b merg ed Weig h t Filled An d Flo o d ed 2 8 .1 [k g f/m]
Sp ecific Weig h t Ratio 3 .0 [-]
Su b m. Weig h t. Dia. Ratio 2 1 0 .8 [k g f/m^2 ]
Ax ial Stiffn ess 6 7 7 .3 [MN]
Ben d in g Stiffn ess 2 1 .3 [k Nm^2 ]
Ben d in g Stiffn ess (frictio n free) 1 6 .7 [k Nm^2 ]
To rsio n Stiffn ess 2 7 .5 [k Nm^2 ]
Ten sio n /To rsio n Facto r 0 .0 0 [d eg /m/k N]
Capacity Curve
Helix position : 270.0000 500
100% Utilisation
600 450 80% Utilisation
400
500
350
Total helix stress
400
Tension [kN]
300
250
300
200
200 150
100
100
50
0 0.0
-0.0004 -0.0003 -0.0002 -0.0001 0 0.0001 0.0002 0.0003 0.0004 0.0 0.04 0.08 0.12 0.16 0.2 0.24 0.28 0.32
Curvature Curvature [1/m]
© Det Norske Veritas Ltda. Todos os direitos reservados. 14
- 15. Global Design and Analysis
Using DeepC Riflex
- Coupled or de-coupled analysis
Wave loading Forced floater motions
Non-linear load model
Non-linear structure
© Det Norske Veritas Ltda. Todos os direitos reservados. 15
- 16. Global Analysis
Using Helica to get capacity curve
- The capacity curve presents all load
combinations that result in the
specified maximum allowable
equivalent stress due to:
- Tension
- Pressure
- Bending
- Torsion
- All cross-section members are
considered
Bend stiffener region
© Det Norske Veritas Ltda. Todos os direitos reservados. 16
- 17. Local Fatigue Analysis
Using Helica
Load sharing analysis
- Axi-symmetrical analysis to establish
tension in each element
- Bending analysis including the
hysteretic, friction induced stick/slip
behavior of the helix elements
© Det Norske Veritas Ltda. Todos os direitos reservados. 17
- 18. Local Fatigue Analysis – Short-term Fatigue Analysis
Purpose of the analysis is assessment of fatigue damage in a stationary short-
term environmental condition
Specification of:
- Helix element
- Longitudinal locations
- Helix positions/hot-spots
- SN-curve
Helix stresses calculated: σ (t ) - Fatigue stress time series
Fatigue stress
- Stick/slip friction due to
bending
Time
Stress range
- Bending about local axis
- Stresses due to tension
(from axisymmetrical analysis)
Rainflow cycle counting
Fatigue damage calculation
© Det Norske Veritas Ltda. Todos os direitos reservados. 18
- 19. Local Fatigue Analysis – Long-term Fatigue Analysis
Purpose of the analysis is to assess the
long-term fatigue damage by
accumulation of all short-term
conditions
Required input:
- Fatigue results for all short-term
conditions
- Probability of each short-term condition
© Det Norske Veritas Ltda. Todos os direitos reservados. 19
- 20. Size of problem – numerical performance
270 TD simulations with 1 hour duration (20.000 time steps)
Rectangular tensile armours, 4 hot-spots
12 helix locations
Fatigue damage calculated at 76 locations along riser (including bend
stiffener area)
Total of 985.000 1 hour stress time series generated by cross-sectional
y
analysis yl
xl
Computation time – standard single core lap-top
Model Total Per case
φ
Tube, no friction 0.38 hours 5 seconds x
Helix, no friction 3.8 hours 50 seconds
Helix with friction 5.8 hours 77 seconds
Global TD analyses not included in computation time
© Det Norske Veritas Ltda. Todos os direitos reservados. 20
- 21. Example
Local Fatigue Analysis
© Det Norske Veritas Ltda. Todos os direitos reservados. 21
- 22. Analysis process
Calculate cross section parameters
- Mass/weight in UmbiliCAD
- Axial, bending and torsion stiffness from Helica
Global analysis using DeepC
- Riflex - Inpmod
- Riser definition – Cross section parameters from first step
- Environment definition – wave heights, current etc. with corresponding direction
- Riflex – Stamod
- Static analysis
- Riflex – Dynmod
- Dynamic analysis
Short-term fatigue analysis using Helica
Long-term fatigue analysis using Helica
Design of umbilicals is also based on ULS – this is part of UmiliCAD/Helica
analysis, but not covered in this presentation
© Det Norske Veritas Ltda. Todos os direitos reservados. 22
- 23. Lay-out of the riser
27 Environment conditions
© Det Norske Veritas Ltda. Todos os direitos reservados. 23
- 24. Step 1 Create cross-sections and calculate mass properties
UmbiliCAD will do both
Parameter Valu e Un it
Ou ter Diameter 1 1 7 .0 [mm]
Mass Emp ty 2 3 .0 [k g /m]
Mass Filled 2 6 .5 [k g /m]
Mass Filled An d Flo o d ed 2 8 .7 [k g /m]
Su b merg ed Weig h t Emp ty 1 2 .0 [k g f/m]
Su b merg ed Weig h t Filled 1 5 .5 [k g f/m]
Su b merg ed Weig h t Filled An d Flo o d ed 1 7 .7 [k g f/m]
Sp ecific Weig h t Ratio 2 .6 [-]
Su b m. Weig h t. Dia. Ratio 1 5 1 .1 [k g f/m^2 ]
Ax ial Stiffn ess 4 7 6 .3 [MN]
Ben d in g Stiffn ess 2 9 .0 [k Nm^2 ]
Ben d in g Stiffn ess (frictio n free) 2 3 .7 [k Nm^2 ]
To rsio n Stiffn ess 4 3 .5 [k Nm^2 ]
Ten sio n /To rsio n Facto r 0 .0 0 [d eg /m/k N]
© Det Norske Veritas Ltda. Todos os direitos reservados. 24
- 25. Step 2 Calculate stiffness using Helica
© Det Norske Veritas Ltda. Todos os direitos reservados. 25
- 26. Step 3 Run global response analysis using Riflex
For a fatigue analysis, responses under multiple environment conditions (wave scatter) may be
analyzed. Batch executions are normally used. (run-riflex.bat)
Motion RAOs of the vessel will also be used. (trafile.tra)
In this example, the analysis setup contains 27 weather directions.
Inpmod.inp
run-riflex.bat
Stamod.inp executing…
Dymod.inp
Trafile.tra
© Det Norske Veritas Ltda. Todos os direitos reservados. 26
- 27. Capacity curve vs. time-domain time series
Responses should be within the 80% or 100% capacity curves
© Det Norske Veritas Ltda. Todos os direitos reservados. 27
- 28. Step 4 Run fatigue analysis using Helica
Calculate short term fatigue for critical area
for each of the bins.
- In this example the critical areas are the BS area
of SDTube2 and SDTube4 (inner layer of cross-
section).
When all bins are completed, fatigue is
accumulated and long term fatigue is
calculated by Helica.
Following input files are normally needed:
- Helica Fatigue analysis input file (BS-
SDTube2_fat_ana.inp)
- Helica Cross Section (helica.inp, could be
generated by Helica)
- Fatigue setup, (where to calculate fatigue etc
(BS-SDTube2_fat_geo.inp)
- Fatigue probabilities (fat_conditions.inp)
- SN curves (SN-lib.inp)
© Det Norske Veritas Ltda. Todos os direitos reservados. 28
- 29. Helica fatigue analysis input file
Defining the parameters used in
Helica fatigue analysis, e.g.
- Analysis time window
- Helix element positions
- If friction will be considered
- Etc.
Here ‘2’ means friction will
be considered using
updated contact force.
© Det Norske Veritas Ltda. Todos os direitos reservados. 29
- 30. Long term fatigue histograms
Case19_layer3_compone
nt1_location11_hotspot5
© Det Norske Veritas Ltda. Todos os direitos reservados. 30
- 31. Summary – Why UmbiliCAD and Helica?
To facilitate the deepwater challenge 1) :
- “Increased importance of higher order cross-sectional effects”
- Tension/radial displacement coupling
- Internal friction
- “These effects may considerably affect dynamic umbilical performance in deep
waters”
Main benefits
- No need for specialist competence in a CAD system – drawings, cross sectional
properties and early design capacity curves made in hours instead of days
- Outstanding numerical performance gives answer in days instead of weeks
- Extreme design – capacity curves for entire cross-section in compliance with applicable
design codes
- Fatigue stress analysis of helix elements considering stick-slip behaviour in bending
- Calculation of consistent fatigue stresses by direct application of global response time
series from DeepC as external loading
- Short-term fatigue life calculation capabilities including Rain-flow cycle counting
- Long-term fatigue life calculation capabilities including assessment of long-term stress
cycle distribution
© Det Norske Veritas Ltda. Todos os direitos reservados. 31