A driveway or pavement with brick blocks is prone to a variety of stains and spillages Here is a guide on how to treat the affected area.

1. Types of Stains On a
Brick Pavement
Types of Stains On a
Brick Pavement

2. A driveway or pavement with brick blocks is
prone to a variety of stains and spillages Here
is a guide on how to treat the affected area.

3. These are common on residential
paving. They prefer damp and
shaded areas.
Treat with an effective and safe
moss or weed killer. Apply during
dry weather.
Treating Moss, Algae and Lichens

4. Removing Rust's Stains
At first identify the source of rust stain.
To remove the stain soak the affected
area and apply 10% hydrochloric acid.
Please note that too much
hydrochloric acid can etch the surface
of your paving, so be careful with the
quantity.

5. Cleaning Oil Stains and Grease
Any oil spillage or grease stain
should be soaked up, and not
rubbed as this can spread over a
large area.
Scrub the area with a strong
detergent and then wash with hot
water.
For greater impact leave the area
with detergent for a certain period of
time and then wash with plenty of
water.

6. Treating Mortar Stains
Simply use a mortar stain
cleaner.
Please ensure that you stick to
the manufacturers guidelines.

7. Removing Scuffs and Tyre Marks
The tire marks can be removed
using a power wash with a
broom and a light detergent.
It is better to clean the marks on
a daily basis.

8. To install brick pavers that can withstand all types of
stains, contact -
Well Laid Paving Perth
www.welllaidpavingperth.com.au
Maynard Way
Karrinyup 6018
0448 440 229