Security and surveillance solutions

Security & Surveillance
„„ Alarm 10
„„ Alarm Access Control��14
„„ Alarm Accessories��13
„„ Alarms Hard-Wired��10
„„ Alarm Wireless��12
„„ Connection Cables��20
„„ PIR Motion Detectors��17
„„ Power Supplies��18
„„ Reversing System��25
„„ Siren and Strobe��16
„„ Twisted Pair Video Transmission��21
„„ Wireless Camera Systems��24
„„ Door Entry Security 2
„„ 2 Wire Audio��2
„„ 2 Wire Video��3
„„ 4 Wire BW��9
„„ 4 Wire Video��6
„„ GeoVision 68
„„ GeoVision Access Control��73
„„ GeoVision DVR Compact��72
„„ GeoVision IP Cameras��69
„„ GeoVision Licenses��68
„„ GeoVision NVR��68
„„ GeoVision Recording Server��71
„„ Surveillance Accessories 46
„„ Brackets��46
„„ Housing��46
„„ Lens��48
„„ Monitors��49
„„ Surveillance CCTV Cameras 33
„„ Box��45
„„ Bullet��41
„„ Clandestine��33
„„ Dome Indoor��38
„„ Dome Vandal-Proof��39
„„ Microphones��33
„„ PTZ Controllers��34
„„ PTZ Decoders��35
„„ PTZ Speed Dome��36
„„ Surveillance DVR 50
„„ DVR PC Cards��55
„„ DVR System Kits��52
„„ DVR Systems��50
„„ GeoVision DVR PCIe Cards��55
„„ Surveillance IP Accessories 74
„„ Ethernet Over Coax��76
„„ PoE��74
„„ Surveillance IP Cameras 56
„„ IP Cameras GeoVision��58
„„ IP Cameras LevelOne��56
„„ IP Cameras Misc��61
„„ IP Cameras VIP��60
„„ Surveillance IP NVR 62
„„ NVR Kits��62
„„ NVR Systems GeoVision��67
„„ NVR Systems LevelOne��66
„„ NVR Systems VIP��64
„„ Surveillance Misc 28
„„ Dummy Cameras��32
„„ DVR System All-In-One��28
„„ IR Spot Lights��31
„„ Snake Inspection Cameras��30
„„ Sports Cameras��29

Phone: 02-9798-9233 Fax: 02-9798-0017
Security Surveillance
Phone: 02-9798-9233 Fax: 02-9798-0017
DOOR
CATCH
OPTION
EL971
POWER SUPPLY
1.2A
H2-595A
DOOR
STATION
EXPAND UP TO
FOUR HANDSETS
(w/ 1.2A power adaptor)
2 WIRE
SYSTEM
H2-DJ4
HANDSET
DPS
POWER
INJECTOR
H2-DJ4
HANDSET
†† 2 Wire Audio
†† Door Entry Security
AUDIO-ONLY HANDSET
• Handset audio only phone
intercom door answer
• Touch sensor button modern
style with LED display
• Programmable ring tones for
intercom or door station
• 2x door open buttons
programmable from 4 doors
• Compatible with all H2
outdoor Indoor stations
• 24V (25mA/110mA)
• 187x97x33mm
Code
H2-DJ4
AUDIO-ONLY DOOR STATION
• Audio only, no camera.
• 2 Wire compatible.
• Door bell call button.
• Microphone and speaker to converse.
• LED indicators Talk/Unlock.
• Programmable unit ID Code.
• Door strike output optional.
• Metal construction IP55.
• 24Vdc 60/200mA
• 137x49x28mm
Code
H2-595A
RAIN HOOD
SUIT H2-595A
Outdoor weather
resistant rain shield
zinc alloy.
ANGLE BRACKET
SUIT H2-595A
Tilt door station to the left or right 30°.
Outdoor weather resistant zinc alloy.
Code
AB595
AUDIO-ONLY INTERCOM
DOOR ANSWERING SYSTEM
A basic system comprises a H2-595A
Door station with call button and 2 Way
audio connections via the H2 2-Wire
system to a H2-DJ4. Power is supplied
by use of a 24Vdc power pack and a
DPS power injector. An EL971 Door
Catch can also be used for door entry.
All items are sold separately.
EXPANDABLE SYSTEM
The real value of this system is its
expandability into an advanced
programmable system of multiple
door entry and monitors by use of
additional H2 accessories.
See manuals for details
DBC-4S
A B C D
DPS
Bus PL S2+ S1+ S1- Bus PL S2+ S1+ S1- Bus PL S2+ S1+ S1- Bus PL S2+ S1+ S1-
H2-DJ4
HANDSET
H2-DJ4
HANDSET
H2-DJ4
HANDSET
H2-595A
DOOR
STATION
H2-595A
DOOR
STATION
H2-595A
DOOR
STATION
H2-595A
DOOR
STATION
H2-DJ4
HANDSET
H2-DJ4
HANDSET
H2-DJ4
HANDSET
H2-DJ4
HANDSET
H2-DJ4
HANDSET
DBC-4S
ABCD
DBC-4S
ABCD
DBC-4S
SPLITTER
DBC-4S
SPLITTER
DPS
INJECTOR
5A 24Vdc
POWER
SUPPLY
DBC-4S
SPLITTER
UP TO 32 HANDSETS MAXIMUM
WITH 5A 24VDC POWER SUPPLY
AUDIO-ONLY POWER REQUIRED
INJECTOR - DIN MOUNT
Inserts power from a 24V source and
inserts it into the twisted pair line.
Code
DPS
POWER PACK 24VDC 6A
As required to power
the DPS injector.
Code
RH595
http://data.wescomponents.com/lookc/
Code
SMP24V6A-25P
DOOR
BELL

DOOR
STRIKE
FOUR WAY BRANCH
HANDSET SPLITTER
Splits 2-Wire system into
Four audio output for handsets.
Extra DBC4S can be added to
the master line if required.
or
Four video inputs for combining
door cameras with door control.
DIN Mount.
Code
DBC-4S
DOOR STRIKE
FAIL SECURE
Remote entrance Door catch
release. Requires a trigger of
12Vdc 500mA to enable a door to
be pushed open. Mounts into the
frame, replacing the door catch.
150mm Mortise Mount.
Code
EL971
30° Tilt
05-2

Web: www.wagneronline.com.auEmail: sales@wagner.net.au
Touch Control LCD
OPTION
Talk between Monitors
Photo FrameLights On !
OPTION
2 WIRE DOOR VIDEO INTERCOM
Latest in door video innovation. Intelligent twin wire system which allows for a quick and economical installation.
System setup is easy via the comprehensive yet simple menu system. Modern design and style to suit all modern decors.
• No polarity, twisted pair, easy wire solution. Use Cat5 or twin core cable. See our twisted pair drop cable.
• One common power supply to door stations and monitors.
• Supports 1 to 4 monitors connected in a daisy chain ( loop in, loop out ) for easy installation.
• Can be star wired by the addition of a 4 way splitter ( DBC-4S ).
• Supports 1 door station or can be expanded to support up to 4 door stations by adding a splitter ( DBC-4S )
• System expandable up to a maximum of 16 Monitors and 4 Door Stations by using 5 splitters.
• Door stations can open door latches ( EL971 Optional )
DOOR ENTRY CAMERA
IP45 OUTDOOR
Sharp brand CCD in a heavy duty door station with hood.
Attractive and stylish zinc-alloy housing.
Camera’s viewing angle is adjustable.
LED lit name plate display
IP45 weather rating.
IR illumination for 0 lux night vision
176x90x23mm. requires cable.
DUPLEX CAMERA
ONE CAMERA TO TWO DWELLINGS
One monitor to two dwellings ( duplex).
Sharp brand CCD in a heavy duty door station.
Two call buttons with illuminated labels.
IP45 wheather rating.
IR illuminated for 0 lux night vision.
176x90x23mm.
Requires cable.
Sold separately.
Requires cable
and monitors.
Code
H292RH
Code
H291RH
†† 2 Wire Video
Ordering is simple, order the door station, monitor of your choice with the PC6 package and as many additional monitors you require, up to 4.
If more than 4 monitors are required, not a problem, the system can be expanded up to 16 monitors however a higher current power supply
and one 4 way splitter for each set of 4 monitors is required. Please see our website for more information. data.wescomponents.com/lookc/
2-WIRE
VIDEO
SYSTEM
Door
Camera
Monitor
Door
Strike
AC~
PC6
More
Optional
Monitors
DBC-4S
Expand To Further
Optional Monitors
Up To 4 Star Wired
Door
Camera
Monitor
PC6
More
Optional
Monitors
Basic wiring mode for loop in / out ( daisy chain ) wiring
Basic wiring for star configuration
If more than 4 monitors are required, not a problem, the system can be expanded up to 16 monitors however a higher current power supply
and one 4 way splitter ( DBC-4S ) for each set of 4 monitors is required. Please see our website for more information.
See our website for wiring details. See our website for wiring details.
Sold separately.
Requires cable
and monitors.
http://data.wescomponents.com/lookc/ http://data.wescomponents.com/lookc/
05-3

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
SNAP-SHOT
VISITORS
4” LCD COLOUR VIDEO DOOR INTERCOM H2
LOOK-C LOW-PROFILE WIDE-SCREEN
Details Code
Monitor w/ PC6 H2-254
Monitor Only A2-254
• High quality 4’’TFT LCD Digital Screen
• Colour icon and text menu display OSD
• Plastic housing with aluminium front panel
• Streamlined thin design. 23mm thin.
• Assorted melody chimes (x12) programmable
• Compatible with all H2 outdoor Indoor stations
• Power Supply 24Vdc (Optional)
• Standby 15mA; Working status 210mA (on)
• 4’’ Digital 4:3 TFT 320x240 pixels
• Wiring: 2-wire (no polarity) up to 100M
• 200×135×23mm
Note: H2-254 w/ PC6 refers to the 1.5A
power supply and injector required one
per system (depending on total power
requirements: See DPS option).
3.5” LCD COLOUR VIDEO DOOR INTERCOM H2
2-WIRE STATION VERTICAL DESIGN
3.5’’ Colour Digital TFT Screen 320x240px.
Compact and slim design to suit any decor.
White plastic casing with silver surround.
Modern vertical style, brushed aluminium trim.
Kit Includes monitor and PC6 powerpack.
All parts available separately for expansion.
Details Code
Monitor w/ PC6 H2-16D
Monitor Only A2-16D
Note: H216D w/ PC6 refers to the 1.5A
power supply and injector required one
per system (depending on total power
requirements: See DPS option).
• Entrance Monitoring view
• Auto On with Call button
• Converse with entrance
• Door open control with
• Optional Door Catch
• up to two locks per station
• Intercom between monitors
• Monitors naming function
• GUI Menu system
• Selectable door chime
• Adjustable picture
• Light On (Req. DCU)
• Expand up to 16 units
• 220x110x20mm
• 210mA (on)
HANDSET AUDIO-ONLY
• Handset audio only phone intercom door answer
• Touch sensor button modern style with LED display
• Programmable ring tones for intercom or door station
• 2x door open buttons programmable from 4 doors
• Compatible with all H2 outdoor Indoor stations
• 187x97x33mm 24V (25mA/110mA) 2 Wire system
Code
H2-DJ4
7” LCD COLOUR VIDEO DOOR MONITOR - TOUCH SCREEN H2
HIGH-RESOLUTION MONITOR WITH VISITOR RECORDING FEATURE
7’’ Colour Digital TFT Monitor with touch screen and SD card recording.
Low-profile minimalist style in ultra-modern contemporary design.
No protruding buttons! Super sleek touch control. Back illuminated.
Full colour High resolution TFT LCD 16:9 wide screen 800x480px.
Easy Icon GUI menu control for an advanced feature set system.
• Digital TFT Screen
• Touch sensor button and screen menu
• 118Mb Inner flash memory expanded to:
• Max.16Gb Micro-SD card picture memory
• Snap-Shot visitors while you are away with
• 1/4/8 auto photo shooting on Call Button
• Digital Photo Frame Playback
• Power supply: 24Vdc 400mA
• LCD 840x480px wide-screen
• 125x225x28mm
PC6 Power Supply includes 24Vdc and Injector.
Accepts one Door Station, sold separately.
Expansion accessories available. See H2 system.
Record Details Code
Yes 7” Monitor with PC6 Power supply H2-27SDD
Yes 7” Monitor only A2-27SDD
No 7” Monitor with PC6 Power supply H2-27TD
No 7” Monitor only A2-27TD
2-WIRE
VIDEO
SYSTEM
05-4

CCTV CONTROL UNIT DCU
ANALOGUE VIDEO WITH LOCK OR LIGHT CONTROL
Allows the 2 wire system
to be expanded to
include up to 2 Analogue
cameras. Incorporates
Exit button input and
control output for door
opener or a Light.
Code
DCU
SPLITTER 4 WAY DBC-4S
Required when additional
door stations ( max 4 ) or
additional monitors,
(Max 16) are required.
One DBC-4S is required
per 4 monitors.
Code
DBC-4S
POWER INJECTOR DPS
Used when a higher current power
supply is required. The DPS injects
power into the 2 wire system to allow
all of the door stations and monitors
to operate from one power source.
Din rail mount, or wall mount.
Injector only, power supply required.
See our website for wiring details.
Code
DPS
POWER SUPPLY OPTIONS FOR DPS
REQUIRES DPS H2 INJECTOR
2-Wire system is designed to be economical in power. For a single
monitor and camera combination the 1A power supply PS6 will
suffice. However, it is recommended that if the system is expanded,
that using the DBC4 injector and then connect a high current supply.
24V @ 6 Amps. 170x60x40mm
Code
SMP24V6A-25P
Injector Only.
Requires Power Supply.
24Vdc. See SMP24V6A-25P
DOOR STRIKE
FAIL SECURE
Remote entrance Door catch release. Compatible with
our door intercoms and other units. Requires a trigger
of 12Vdc 500mA to enable a door to be pushed open.
Mounts into the frame, replacing the door catch.
Power supply NOT included. 150mm Mortise Mount.
Code
EL971
PC6 POWER SUPPLY WITH INJECTOR
Suitable only for the 2wire (H2) systems. Din Rail mount.
26V at 1.5A is enough power for 4 Monitors and Door Stations.
140x90x60mm 100–240Vac input. Hard wired - requires power lead.
Code
PC6
TWISTED PAIR DROP CABLE
High grade, high current, low loss, low capacitance.
Extends distance of standard CAT5 runs by twice
as far. Twisted pair in black PVC Jacket, ideal for
running through walls and areas which are damp
and prone to water penetration or applications
where a better quality cable is required.
8mm Outer sheath 1mm thick “Drop Cable” Jacket.
3mm with 48 strands x 0.2mm x 2 core.
Length Code
100M CAB4822
From CAT5 CAB4822 DPS CAT5 CAB4822 To
Camera 40M 80M PC6 50M 100M Monitor
2-WIRE
VIDEO
SYSTEM
05-5

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
†† 4 Wire Video
4 WIRE DOOR VIDEO INTERCOM SYSTEM
An easy to install digital colour video intercom system. Supplied as individual pieces so as to
design your custom system that is expandable with additional items. Suitable for DYI home
or office video security solutions. Add a door sentry today for low cost and peace of mind.
• 4 wires (polarized wiring) for a simple one cable setup.
• Cable is not supplied. Order to length required.
• Use common twisted pair (eg. CAT5) up to 100M.
• For long lengths or noisy environments, upgrade cables;
use dual coax for audio video Fig.8 cable for power.
• Connect up to 4 Monitors or Monitors and Handsets
• Connect up to 16 Monitors by use of splitters (H4DBC)
• System is expandable from 1 to 4 door stations or
standard CCTV cameras with optional H4MDS switcher.
• A system should comprise H424 or H427, not both.
TAMPER PROOF CAMERA
IP45 OUTDOOR
Sharp Brand Colour CCD Camera in a
heavy-duty outdoor station with rain hood.
Attractive and stylish zinc-alloy housing.
Strong waterproof tamper-proof design.
Camera’s viewing angle is adjustable.
Name plate display with white LED lit.
IR Illumination for 0 Lux night vision.
176x90x23mm. Requires cables.
Code
H491RH
IP45 CAMERA DUPLEX
SINGLE CAMERA TO TWO DWELLINGS
IP45 Weather resistant attractive Zinc alloy
brushed aluminium styled door station
with rain hood. Flush mount. Infrared
illuminated. Dual name plate illuminated.
Two button door bell push goes to one
of two Monitor chains. Single door open
control for common door opening solution.
176x90x23mm. Requires cables.
Code
H4-92RH
DOOR CAMERA COMPACT
NO RAIN HOOD
• Zinc alloy housing attractive design
• Outstanding audio performance
• Wide angle colour CCD Camera
• High resolution Sony ACS 4T DSP
• High white led light for night view
• IP55 protection rated outdoor
• Compact 137x49x28mm
• Available with/without rain cover
WITH RAIN HOOD
Code
H4-595RH
ANGLE BRACKET
Tilts station left
or right 30°
Code
AB595
Code
H4-595
Rainy Cover
90 mm
176mm
23 mm
Connect a 2nd
Door Station
If using 7” Models
4
VideoCable
Optional Television
4
AC ~
AC ~
3
*Example only, Other models may differ in connection. See the units supplied manual.
Connect up to 4 Monitors or
Combination of Monitors and Handsets
Extend...
Basic installation one or two door stations* and up to 4 monitors.
Any monitor styles can be used in the one installation.
(* 7” monitor supports up to two camera door stations, the 4” supports only one.)
The system can be expanded to 4 door stations
by the use of a H4MDS splitter.
4-WIRE
VIDEO
SYSTEM
05-6

OPTIONAL
MEMORY
UPGRADE
TOUCH BUTTON
H4MEM
EL971
OPTIONAL
DOOR
STRIKE
Advanced Structure With Additional Parts
MDS unit connection
Using the MDS (Multi Doorstation Switch) unit to extend 4 Door stations or CCTV cameras.
RLC unit connection
Using the RLC (Lamp/Lock control) unit to control a lamp or an additional electronic lock.
4 4
AC ~ AC ~
3
VT-MDS
4 Cameras Switch
IN USE
4
3
AC ~
RLC
1234
ON
AC Input
4
3
AC ~
RLC
1234
ON
Control ButtonControl Button
AC Input
TOUCH SCREEN
OSD MENU
BUILT-IN MEMORY PLUS
SD-MICRO CARD SLOT MEMORY (Optional)
INTERCOMM (AUDIO ONLY)
TALK BETWEEN BASE STATIONS
RECORD VISITOR SNAP-SHOTS
PHOTOS ON CALL-BUTTON
4” LCD COLOUR VIDEO DOOR INTERCOM H4
High resolution 4’’ TFT Digital LCD Screen in a wall-mount enclosure.
Large illuminated talk button. Optional “unlock” door latch available.
210x160x25mm Low profile, attractive wall mount modern design.
Intercom between additional monitors and/or handsets.
Expands to up to 16 monitors or combinations of monitors and handsets.
Easy to install 4 Core cable solution. Order cable separately.
Requires H4 system door station camera - Sold Separately.
Includes mains power adaptor for monitor (also runs one door station).
Optional Memory Module stores images captured during door bell press.
Description Code
4” Monitor H424
Memory Module H4MEM
7” LCD COLOUR VIDEO DOOR INTERCOM H427DT
Low-profile 23mm thick, 240x145mm monitor with frame in 2 colours.
View full colour high resolution 7” TFT-LCD Screen 1440x234 pixels.
Answer 1 or 2 doors via the video intercom (*up to 4 units w/ H4-MDS)
Push-button door opening function (Requires optional door latch)
Expandable system up to 16x H427 monitors 4 door cameras.
Simple 4-wire system (Cable Not Included) up to 100 Metres of CAT5.
Attractive stylish wall mount unit, easy to install, setup and operate.
Includes mains power adaptor for monitor (and one or two door stations).
SD Card memory model is available optionally, see SDD version below.
LOOK-C LOW-PROFILE WIDE-SCREEN
Description Code
7” Monitor H427DT
7” WITH OPTIONAL RECORDING FEATURE H4
128MB VIDEO MEMORY INBUILT - MicroSD EXPANDABLE
Description Code
7” Monitor SD Memory H427SDD
Monitor Wiring Splitter H4BDU
Door Camera Splitter H4MDS
Quad Screen H4QSW
Remote Light Switch H4RLC
Automatic function for recording each door button press, ready for
instant recall when you get home, to see who came while you were
out! This unit stores 1 to 8 photos on each Call-Button press in its
inbuilt memory with optional *SD micro card up to 16GB for extra
storage.
H4MEM is an extra module for video storage that
captures visitor images while you are not at home.
Manual
Memory Album User Setup Close
Monitor
Playback
Monitor Intercom Inner Call
DS1 00:30
This 7” monitor will support one or two door stations. For more camera or
door station inputs, see H4QSW Quad Screen or H4MDS Camera Splitter.
Expansion options. See next page for details.
4-WIRE
VIDEO
SYSTEM
05-7

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
QUAD COMBINE
QUAD SPLIT
H4 QSW
H427DT / SDD
QUAD SCREEN CAMERA MODULE ADD-ON
ALLOWS TO VIEW 4 CAMERAS ON ONE 7” SCREEN
Enables combining 4 door cameras or normal
composite cameras into the four wire system
as well as also viewing all four cameras on
a single screen by way of quad split screen.
Quad or single viewing is switched at monitor.
Compatible with H427DT/SDD 7” units only.
HANDSET ONLY
EXPANSION OPTION WITHOUT MONITOR
Expands an existing intercom
door answering system. Connects
with any Look-C 4-Wire monitor
units. Add-on to the monitor kit for
use as an extra station for talking
to other handsets, monitors or
cameras. Buttons for answering/
calling and door release control.
Attractive white finish suits any
decor. Wall mountable. System
can include up to FIVE monitors
and/or handsets. Three core cable
for connecting to the system is
required. No additional power is
required. Suit 4-Wire system only.
Code
H4-72
MULTIPLE CAMERA AUTO-SWITCH
UP TO 4 DOOR CAMERAS
Code
H4MDS
Compatible with “Cycle View”.
Extends the 4-Wire system to
4 cameras in total. Door strike
control compatible. Works with
standard video sources too!
Connect cameras, CCTV, etc.
4-WIRE
UP-TO 100M
QUAD
SWITCH
H4 MDS
4-WAY MONITOR WIRING SPLITTER
4-Wire monitors are usually wired in a
daisy chain fashion. If star type branch
wiring is required then use this splitter
for connecting up to 4 monitors,
or 3 monitors and even more Splitters.
H4 BDU
H4 BDU
MONITOR SPLITTER
Splits the single line to 4 Monitors OR
Expand further by adding more H4-BDU
Code
H4BDU
Code
H4QSW
AND SIGNAL BOOSTER
RLC RELAY CONTROL MODULE
TURNS LIGHT ON WITH CALL BUTTON PRESS
Enables control of a light with timer delay.
Relay output. Suits H427 H424 units.
Can also be used as an Exit-Button Door
Catch controller and/or Fail-Safe Door
Catch controller with H427 only.
Connects inline with the 4-Wire system.
Code
H4RLC
REMOTE SWITCH
H4 RLC
SPST
DOOR STRIKE
ELECTRONIC DOOR RELEASE
Remote entrance Door catch release.
Compatible with our door intercoms and other
units. Requires a trigger of 12Vdc 500mA to
enable a door to be pushed open. Mounts into
the frame, replacing the door catch. Directly
compatible with H4 Door Stations.
Code
EL971
http://data.wescomponents.com/lookc/ http://data.wescomponents.com/lookc/
http://data.wescomponents.com/lookc/http://data.wescomponents.com/lookc/
4-WIRE
VIDEO
SYSTEM
05-8

Length Description Colour Code
Door Strike EL971
REQUIRES CABLE
Cable is NOT included in any of the Look-C kits. 4 Core Low voltage “Bell wire” is required. eg. Telephone, CAT5 or security cable, etc.
For runs up to 20M we recommend SEC414 (ACA Approved). For longer runs, CAT5 twisted pair type cable is quite suitable up to 100M.
For electronically noisy environments or to ensure maximum picture quality we have available shielded coax cable with control wires.
Length Description Colour Code
100M Coax + 5 Control Wires Cream SEC7505
305M Coax + 5 Control Wires Cream SEC17505
100M 8 Core Category-5e Cable Blue CNC5100BU
50M 8 Core Category-5e Cable Blue CL161BU
25M 8 Core Category-5e Cable Blue CL158BU
†† 4 Wire BW
BW 4” CRT VIDEO DOOR PHONE HANDS-FREE
MONITOR CAMERA KITS - H4 COMPATIBLE
Excellent economical solution with Low-profile side projection 4” BW
picture tube and IR Illuminated for bright and clear night viewing.
Convenient hands-free view and hear operation. Auto-On screen and listen
on door-bell press. Push-button to talk to your visitor before entry and allow
them in with the optional EL971 Electronic release door catch actuator
control. System is easily expandable with the addition of extra monitors (5)
and/or extra door cameras (4). Intercom feature allows for communication
between additional monitors in different rooms of the house. You can also
integrate the BW monitors in with Look-C range of Colour H4 System if
desired (Colour door camera required for colour system)
REQUIRES 4-CORE TWISTED PAIR CABLE TO LENGTH
REQUIRES 4 CORE CABLE TO LENGTH....
CAT5 cable is available in Blue, Yellow, Grey, Red, Green and Pink.
Other lengths are also available. See Cable Section for CAT5 Cable.
BLACK WHITE KITS
Kit Includes one 4” BW Monitor one Door camera.
Requires connection cable. Monitor size 220x190x55mm
ADD MORE CAMERAS(2)* MONITORS(5)
Up to 5 base monitors can all share on the one system.
Connect two cameras and door strikes to one system.
See and control extra doors with a CSM expansion module.
For 2 to 4 cameras added require H4-MDS Switcher to suit.
Description Code
Base unit H4-87 Surface Mount Camera BWS68SU
EXPANDABLE BW SYSTEM ITEMS
Description Code
Monitor Only BWM68
Handset Audio Only (No Screen) H4-72
Surface Mount Camera Only BWC580
Duplex Dual System Camera BWC586
Door Camera Splitter H4MDS
Door Strike EL971
Weather Shield for cameras RH584
• DOOR STRIKE EL971
• Door-Strike Requires 12Vdc/500mA
source, local or remote
H4 MDS H4 BDUH4-84
95x150x15/40mm
Flush Mount
RH584
Rain Hood
Flush or Surface
SUPPLIED WITH
H4-87 SURFACE
MOUNT DOOR
STATION
100x130x40mm
4-WIRE
VIDEO
SYSTEM
05-9

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
†† Alarms Hard-Wired
ALARM SYSTEM MULTI-ZONE HARD-WIRED PROFESSIONAL
8 ZONE EXPANDABLE UP TO 64
If you’re looking for complete home or commercial building protection, you require a WGAP864 hard-wired Alarm System. Available in an 8 zone
panel that is expandable to 64 zones by using up to 6 external modules available, each with 8 zones. Optional sensors and sirens help protect
all areas of your home or building by performing functions such as monitoring rooms and offices for movement, and detecting when doors or
windows are opened. This gives you greater peace of mind that your building is secured against thieves, burglars and vandals. The WGAP864
is a versatile, microprocessor-based, fully featured 8/64 Zone alarm panel, which has two partitions. The alarm panel provides immediate
notification of burglary, and 24Hr fire, medical panic conditions. There is a dedicated panic zone, monitored siren output, auxiliary power
outputs and five (expandable to 25) programmable outputs that may be programmed to perform various trigger/switching functions.
• 8 zones included
• Expandable to 16 Zones on-board
• Expandable to a total of 64 Zones with external boards.
• Supports up to 8 keypads
• 128 user codes
• 25 fully programmable outputs
• Ability to log up to 1000 events
• 1.5A available onboard power (dual power supply)
• Dedicated 500mA battery charger for optimal backup battery management
• IDS’s renowned one-button arming
• 3 quick arm modes: Stay, (2) Away and (3) Stay and Go
• 4 stay profiles: Stay, Night Stay, Day Stay, Perimeter
• Supports star or daisy chain modules up to 300 Metres
• Dual and split reporting
• Dynamic battery self-test
• Dedicated panic zone
• Optional tamper per zone
• Separate box tamper zone
• No activity arming
• Recall bypass selected
• Auto arm/disarm per partition
• User-enabled chime and buzz zones
• Programmable loop response time
• Excellent protection against lightning
• Telephone communicator (Remote Optional)
• Optional Voice Recorded Message sending
Code
WGAP864
WGAP864 ALARM KIT
Save time and hassle with this packaged bundle.
• 1x Base Unit 8 Zone
• 1x Control Keypad
• Power supply/charger
• 12V7Ah SLA Backup
• Outside Siren Strobe
• 3x PIR Sensors
• 2x Surface Reed Switches
• Requires Cable
Code
WGAP864PACK
Includes Alarm Panel in Box
Includes 1x Keypad (More available)
Requires 16VAC 1.5A Power Charging
Requires ALL connection Cables, etc.
12V Lead-Acid Battery for Backup (Optional)
WGAP864 BACKUP BATTERY
12vV 7Ah SLA Battery
Code
PG7-12
WGAP864 POWER SUPPLY
16Vac 1500mAh Mains Power Pack used for supply
and also charging of Optional Backup Battery.
Code
PS16VAC
WGAP864 EXPANSION MODULES
Connects directly to WGAP864 main panel
to expand from 8 Zones to 16 Zones.
Code
WGAP864EXP816
WGAP864 KEYPADS
Add extra keypads for
additional doors, etc.
Up to 8 Keypads total.
Code
WGAPKP16CLCD
WGAP864 SMS MODULE
Allows WGAP684 with its Contact ID format
dialer to send SMS messages. Connects
to standard telephone line, No SIM card
required. Maximum 16 alarm zones.
Code
SMSIB
WGAP864 TO PC MODULE
Connect to your PC for
programming functions into your
WGAP864. Standard computer
USB with Software, windows
compatible.
Code
WGAPCABLEUSB
External 8 Zone expander module
for up to a total of 64 Zones.
Code
WGAP864EXP1664
WGAP864 ACCESSORIES AND OPTIONAL EXTRAS
WGAP864 VOICE MODULE
The board contains a DMTF decoder
chip and a flash memory chip which add
telephonic voice interaction to the panel.
The user can receive alarm messages
or can control the system via the phone
by pressing keys on the phone.
Code
WGAPX64VM
†† Alarm
05-10

8 ZONE ALARM
INBUILT DIALER FOR SMS OR BACK-TO-BASE
A premier 8 Zone Alarm Panel and LCD Keypad,
ideal for use in a home or business. The
system is designed to provide personal security
monitoring via your mobile phone using SMS
Messaging or optional high security 24 Hour
back-to-base monitoring. (*Fees Apply) System
reports are sent using SMS messages via your
landline. The system is designed to be easily
programmed, with all programming and setup
done via a simple menu-driven system.
Code
SMS8
UHF CODE HOPPING REMOTE CONTROL MODULE
4 CHANNEL WITH TWO KEY-FOBS AND PROGRAMMABLE RECEIVER
Description Code
4CH RX TX Kit ALM200
Extra Transmitter ALM200RM
Advanced multi-purpose 4-channel UHF receiver / transmitter set with four fully programmable relay
outputs (1 amp rating each). Supplied with TWO code hopping, 4 button remote controls with batteries and
one compact base unit programmable receiver 110x60x36mm. Terminals are bare wire screw types with
Common/NO/NC connections. Add wireless functionality to virtually any alarm panel or device.
UHF CODE HOPPING REMOTE CONTROL
UNIVERSAL 2 CHANNEL WITH TWO KEY-FOBS AND RECEIVER
This product is designed to be simple and easy to install and use. Primarily, this
product can be used to remote control your car, garage door, home alarm system, or
your electric gate, and more. The unit is supplied with 2, dual button remote controls
key-fobs. The remote controls for this unit operate using code hopping security. This
technology sends a unique and different code each time any of the remote control
buttons are pressed thus preventing unauthorised copying. Various features depend
on how you wire the included receiver module. Extra accessories may be required
for some of the additional features. 1 second (momentary) negative outputs for each
channel 150mA maximum. Separate latched negative output for channel 1 and also
LED flashing out. i.e.- Flashes when the button is pressed, stops when it is pressed
again. Up to 100m radio frequency range (line of sight). Batteries included.
Compact base unit 65x30x12mm requires 12Vdc-14Vdc 500mA power supply.
Description Code
2CH TX RX Kit ALM201
Extra Transmitter ALM201REM
WIRELESS REMOTE
SUIT SMS8 ALARM PANEL
The SMS8RX is a state-of-the-art narrow band wireless receiver, designed to
operate with the SMS8 control panel. It has been specifically designed to enable
easy installation with a simple 2-wire interface connection and is supplied complete
with 2 high security code hopping remote controls. Remote functions include arm,
disarm, home mode and panic. It features intelligent wireless detector learning
allowing you to quickly add or erase up to 8 detectors from your system including
PIRs, reed switches, smoke sensors and panic buttons. Low battery and detector
supervision are also on board.
Code
SMS8RX
Up to 200M radio frequency range via line of sight (antenna included). All outputs are
individually programmable to suit almost any application. Each output option Includes
momentary, latched, timed or pulsed. Power supply required 12-14VDC @ 500mA
(alarm panels or automotive). Supports detector low battery, supervision tamper
signal outputs. Step by step programming via remote control indication via LEDs
Utilises secure code hopping remote control technology.
Quality product designed in Australia, made in Taiwan. RoHS, CE, etc.
05-11

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
HOME WIRELESS ALARM KIT
QUICK AND EASY INSTALL
The Watchguard alarm is a complete stand-alone
security system, which is ideal for the home or
business owner wanting an affordable security
system without the labour of hard wired installation.
If the alarm is triggered a built-in strobe and siren
will sound for 5 min. Included is a bonus screecher
siren with 10M of cable to connect to the base unit.
This siren generates an intolerable noise to repel
intruders from inside the property. Two wireless PIR
body heat detectors are included, expandable to
an additional 6 units (available separately). Battery
life is around 3 years. The range for each zone
is 10 metres from the central unit. Arm/disarmed
by convenient key-fob code-hopping UHF remote
controls. The Watchguard is secure, very reliable,
economical and extremely easy to install operate.
Code
ALM101
• Feature packed 8 zone security system (2 Zones Supplies)
• Easy wireless installation. Portable for transient situations.
• 2 x quality wireless battery operated passive infrared detectors
• 2 x high security code hopping remote controls with lithium batteries
• Emergency panic button function on the remote controls
• 12V 1.2Ah SLA Backup battery mains power adaptor included
• Powerful external siren with flashing blue strobe
• Same appearance as industry standard alarm systems
• High frequency internal siren to repel intruders
†† Alarm Wireless
WIRELESS PIR
EXPAND WIRELESS ZONES
A high quality infrared body
movement sensor designed
for use with the Watchguard
ALM101 Wireless Alarm System.
The detector is very easy to
install and setup and provides
excellent detection sensitivity due
to the Dual-Edge® PIR Sensor
technology. 12M motion detection
range 90º scan. Intelligent Power
Saving to extend life of batteries
up to 3 years. Selectable
sensitivity and pulse count to
reduce false triggers. Swivel
bracket for easy mounting and
adjustment.
Code
ALM102
WIRELESS REED SWITCH
DOOR WINDOW DETECTOR
A high-quality wireless reed switch
designed to provide additional security
and detection methods to expand
zones for the ALM101 Watchguard
Wireless Alarm System. The magnetic
reed switch is designed to monitor
home access points such as doors
and windows, which may be used to
gain entry to the property by thieves.
If contact is broken between the two
switches when the alarm is armed (ie
if a door is opened), then the switch
will trigger and activate the alarm. Up
to 5 years life span from batteries.
Tamper Protected Case. Sends Alarm,
Supervision, Tamper Low Battery
Signals to base.
Code
ALM103
WIRELESS SMOKE DETECTOR
INTEGRATES WITH ALARM
High-quality gas-ionisation
type smoke detector which is
compatible with the ALM101
Watchguard Wireless Alarm
System. By expanding your
alarm system to include a smoke
detector, your alarm will trigger
when smoke is detected, making
these a potentially life-saving
addition to your security system.
Stand-alone buzzer 85dB alarm.
9Vdc battery operated (required).
Supervision report compatible.
Code
ALM104
WIRELESS KEYPAD ENTRY
4 DIGIT PROGRAMMABLE
Designed to allow greater
alarm convenience.
A keypad allows you to
perform the arm/disarm,
home mode and panic
functions of your alarm via
PIN code.
Code
ALM105
Also compatible with
other wireless receivers:
SMS8RX, ALM200,
ALM201 and ALM101
05-12

SECURITY ALARMED PADLOCK
SCARE AWAY THIEVES!
This Security Alarm Padlock, when armed, emits a
110dB ear-piercing ultra loud siren when movement or
shock is detected, increasing the chances of scaring
away thieves and protecting your valuables. The padlock
features a 110db internal siren which sounds if the lock
is moved, touched or knocked after it has been armed.
The padlock has been manufactured to the highest
standards with a stainless steel shackle and hardened
zinc alloy body. The body of the padlock has been
powder coated providing long-life extra corrosion, water
and weather resistance. The versatility of the padlock
make it suitable for use in any number of applications,
including garden sheds, gates, garages, lock-boxes,
bikes, toolboxes, trailers, caravans, lawn mowers and
garden machinery. 100x60x30mm. Battery Inc.
Code
ALM211
ALARM WARNING SIGNS
A4 STICKERS x4
2x Rear adhesive for wall mount.
2x Front adhesive for window mount.
Size Code
210x300mm ALM221
A3 CCTV SIGN
Single sign corrugated plastic
Weatherproof and UV resistant
Size Code
420x300mm ALM222
†† Alarm Accessories
SECURITY CABLE PAD LOCK
Universal purpose
Pad-Lock included
“O” Ring to Loop
3x Loops supplied
Premium grade
Plastic sheathed.
2M STEEL LOOP TYPE
Code
NBL51
SECURITY CABLE COMBINATION LOCK
Code
NBL50
Code
NBL21
STEEL LOOP TYPE
Double slip knot
lock Combination
lock Laptop hook.
Premium grade
Plastic sheathed.
PADLOCK TYPE
Rotary Combination
lock Pad-lock hook
style. 2 metre reinforced
steel lead PVC coated.
Terminates to a loop.
THE LIGHTS ARE ON BUT NOBODY IS HOME
SECURITY ZONE AUTO ILLUMINATION
Assorted 24Hr/7day 240Vac timers.
Digital (with Random) or Mechanical.
See Section POWER for details.....
Code
PC697
24/7 DIGITAL
A5 WINDOW STICKER
Rear adhesive Stickers.
Size Code
100x130mm ALM223 ALM223
ALM222
ALM221
05-13

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
†† Alarm Access Control†† Alarm Accessories
REED SWITCHES
Code
BP33
Code
RSW74
LOCK KEY SWITCHES
Code
AKS8071
Code
AKL101
SECURITY KEYPAD ENTRY TERMINAL
Access keypad for controlling
electric locks, door strikes and
security systems. Comes with
a durable long life membrane
keypad, with 4x status indicators.
Completely self contained. Multiple
user, fully programmable with three
independent output signals. Big or
small # Codes. Control the optional
door strike directly and/or the
central alarm system, etc. With door
re-lock time-out features. Weather
resistance. 12-24V 117x117x21mm
Code
DK9823
SECURITY KEYPAD DOOR TERMINAL
Stainless steel wall plate. Flush or
above mount. Designed for security
control or direct door-strike applications
under covered areas. Single User or
Multiple. Completely self contained fully
programmable with relay output to control
the optional door-strike directly and/or
the alarm system, etc. With door re-lock
time-out features. Requires 12Vdc.
WALL PLATE VERSION
Code
DK9510
Colour Code
White RSW222
Cream RSW686
Brown RSW223
ROLLER DOOR
United Security Products
Professional grade security
Made In USA. Cast alloy.
Suit roller doors, etc. 2.25”
Gap max. (60mm) 3.5x1.5”
(90x40mm) base Metal coil
wire protected Normally
closed switch
FLUSH
United Security Products
Professional grade security
Made In USA. Reliability. Suit
doors and windows. Invisible
type solution 8mm plug, 20mm
deep Normally closed switch
White plastic plugs
CLASSIC STYLE
Magnetic proximity switch Suit doors
and windows. 90x20x12mm (x2
pieces) Normally open reed switch
Requires soldering. Rola®
SP3T BARREL SWITCH
3 Position for
Arm/Off/Test, etc.
Single pole switch
Key hole cover for
keeping out dust.
CAM-LOCK
Physical key lock
rotates the flange
by 90 with key.
19mm Mounting Hole
TAMPER SWITCHES
White Plastic
18.5mm hole
Push-To-Break
Normally Closed or
Normally Open
PUSH SWITCHES
Contact Type Description Code
N/C Normally Closed Push-To-Break SWP800
N/O Normally Open Push-To-Make SWP801
DUAL BUTTON EMERGENCY SWITCH
Dual button activation virtually
eliminates accidental triggering.
Push to Close momentary contact
type. Pre-wired for quick installation.
Sturdy metal case, wall mount.
Silver-plated SPST contacts
Rated 1Amp at 25VDC.
Code
ALM122
N/O N/C CONTACTS
Normally open and normally closed
magnetic reed switch.
3W contact rating 250mA
Size 13x12.5x55mm.
Code
SW5070
ACCESS CONTROL KEYPAD
Code
DK-2871
The inbuilt RFID card reader allows for a smart card system to read
the data from the card and output it as the entry of the PIN/User Code.
These functionalities and the PINs, RFID Cards, etc. are all
programmable through the unit to suit your needs.
ACCEPT INPUT FROM KEYPAD AND/OR SMARTCARD
This makes the access control keypad
an ideal keypad for Door Strike or
Alarm Arm-Disarm Control System.
Door bell button. Backlit quality key
buttons are made of epoxy coated
silicone rubber to make them more
durable so key numbers will not fade
with use. 117x117x28mm. 12Vdc
Two RFID Cards
are included.
05-14

DOOR STRIKE
FAIL SECURE
Remote entrance Door catch release. Compatible with
our door intercoms and other units. Requires a trigger
of 12Vdc 500mA to enable a door to be pushed open.
Mounts into the frame, replacing the door catch. Power
supply NOT included. 150mm Mortise Mount.
Code
EL971
180KG FORCE SINGLE DOOR MAGNETIC LOCK
180KG HOLDING FORCE 4.5W
Heavy duty ultra safe secure magnetic door lock with 180kg holding force capacity.
Highly energy efficient 4.5W: 380mA at 12Vdc no circuit, directly wired.
Mounts ON door jam. Power-On to hold (Fail Safe).
Magnet Size: 170x32x21mm, Catch: 32x130x10mm
Fail-Safe means for use on exits where
access is not restricted on power failure.
Code
MDL1001
280KG HOLDING FORCE 6W WITH LED
280KG FORCE SINGLE DOOR MAGNETIC LOCK
Heavy duty door lock with 280kg holding force capacity.
5.8W power on to hold. With 0, 3, 6 9 sec fail safe time.
480mA at 12VDC; 240mA at 24VDC (Selectable).
LED Status viewing and relay (NO/NC) output.
Circuit with voltage protection inbuilt.
Magnet base: 250x42x25mm.
Code
MDL1002
280KG FORCE SINGLE DOOR MAGNETIC LOCK WITH MORTISE MOUNT
280KG FLUSH MOUNT 6W
Heavy duty magnetic door lock with 280kg holding force capacity.
480mA at 12VDC. No circuit direct wired.
Suitable for wood, glass, metal, fireproof door.
Size: 230x38x26mm.
Code
MDL1003
360KG FORCE DOUBLE DOOR MAGNETIC LOCK
180KG EACH HOLDING FORCE FOR DOUBLE DOORS
Heavy duty ultra safe secure magnetic double door lock with
2x180kg(each) holding force capacity. Hold when power on.
380mA at 12VDC Direct to solenoid wiring for each (x2).
Suits “French door” type dual hinged opening doors
Mounts on wood, glass, metal, fireproof doors.
Size: 340x35x21mm
Code
MDL1004
560KG FORCE DOUBLE DOOR MAGNETIC LOCK
280KG FAIL SAFE HOLDING FORCE
Heavy duty magnetic double door lock with 2x 280kg (each) holding
force capacity. Switchable for 380mA at 12VDC or 190mA at 24VDC.
Mount on a wood, glass, metal or fireproof door.
Inbuilt protection voltage spike circuit.
Relay output and LED indicator for status.
Size:-500x42x25mm.
Code
MDL1005
05-15

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
†† Siren and Strobe
SIREN STROBE UNIT
INDOOR ALERT 100dB
Wall mount alarm
Compact 75x120mm
Weather resistant
100dB SPL output Blue
strobe 1.25Hz Separate
input for Strobe and
Siren. 10-14Vdc 280mA
Code
KPE5415
STROBE
Code
STL5445
Code
STL5435
FLUSH MOUNT PIEZO SIREN
OUTDOOR SIREN
SIREN COVER
Code
KPE5462
Plastic for a never corrode, never rust outdoor solution.
White ABS with pre-punched mounting holes and a bracket
for tamper switch mounting. 120mm Minimum internal.
1W BLUE
Compact general purpose
Suit alarms, etc. Under eave
installation. Flush or surface
bracket Weather proof design
12Vdc 150mA 1W Xenon High
energy flash 1Hz.
15W AMBER
High power Xenon flash
Orange coloured alert 24Vdc
800mA 92x100mm
Code
KPE6122
Code
PAH1
5” 8Ω HORN SPEAKER
10W Speaker Only.
No Siren Driver. 8Ω
PIEZO INDOOR SIREN
12Vdc
Repel an intruder from your home
by installing this high frequency,
super loud 115dB siren.
85Ø/90Øx40mm
Code
KPE6124
INDOOR COMPACT PIEZO
45x40x60mm 105dB Black
Warble tone 1.5K-3.5KHz
Voltage Code
12Vdc KPE1200
24Vdc KPE2400
3½” OUTDOOR SIREN
Compact 100x90mmØ
12Vdc with inbuilt siren
driver. 115dB single tone.
Fits KPE5462 Cover.
Code
KPE6126
SIREN TO SUIT
Compact to suit box.
Code
KPE6126
WALL MOUNT
Fits 55mm Mounting Hole
12Vdc 110dB Siren
SPEAKER TO SUIT
Compact to suit box.
8 Ohm Speaker Only.
Code
KPE6127
SIREN COVER KIT
INCLUDES SIREN STROBE
This product has been specifically designed to save alarm installers
time and money. It combines a dual power AC/DC high powered siren,
high visibility blue strobe light and tamper switch. It is housed in a
moisture and UV resistant attractive industry standard external casing
and all cabling is pre-terminated. 190x200x135mm
• No assembly required, saves time money on installation
• Highly durable, moisture UV resistant external housing
• Suits all alarm control panels
• Pre-terminated wiring
• High visibility blue strobe
• High volume dual AC DC Siren
• Tamper Detect Switch
• Includes rear protective cover
Code
KPE6125
05-16

PIR CAMERA
Excellent DVR solution. Incorporates both
a PIR low-noise motion sensor and a
Colour CCD Camera in the one convenient
installation. Audio too! Swivel mounting
bracket supplied for easy aim. NO/NC
relay output to alarm or DVR trigger. 2 Lux
46dB. Requires 12Vdc Not Inc. White.
2-IN-1 UNIT
CCD Sony 1/4”
TVL 380
FOV 90º
Lens 3.8mm
Size 60x40x115mm
Code CAM012
PIR
Pulse count (selectable) RFI/EMI noise
reduction temperature compensation
minimise false triggering Dual look
down detection Simple handyman
install Attractive Unobtrusive
Tamper switch. 12Vdc Economical
100x60x40mm Vertical range adjust.
PULSE COUNT BASIC
Code
PIR5314
Code
PIR5313
PIR TRIPLE SENSOR
Advanced indoor movement sensor incorporates
3 detection technologies designed to prevent
false alarms caused by rapid changes in heat,
light levels or from other environmental factors.
Software signal analysis requires both the PIR
and microwave sensors to detect an intruder.
Includes temperature sensor compensation.
Detection range is approx. 12 metres.
PIR MICROWAVE WITH DSP ANALYSIS
Code
PIR5308
PIR DUAL SENSOR
TEMPERATURE COMPENSATED
BATTERY OPERATED PIR ZONE ALARM
Compact and easy to install.
This Passive Infrared Detector
is a totally self contained battery
operated informant. Self-standing
or wall mount. No-wiring, easy to
install. Excellent temporary solution
for welcoming visitors with a Gentle
chime or constant buzz for intruder
detection alert. Use as a door
sentry in shops place in no-go
areas at work or to protect children,
etc. Requires a 9V battery.
STAND ALONE DOORWAY SENTRY
Code
MA002
DOORWAY ELECTRONIC EYE
IR reflected beam across a doorway
(up to 6 metres). Includes the
separated alarm buzzer alert unit.
Includes 9V power pack.
Size Code
115x45x80mm DOOR5193
Code
DOOR5197
Code
BUZ5188
DOORWAY BEAM PAIR
IP66 Rated enclosures for
indoor or outdoor. Commercial
grade units. Good for 30M
range. Relay trigger output.
Adjustable beam power Needs
buzzer power.
SEND UNIT RECEIVE UNIT
Code
DOOR5196
Code
DCA100-12PM
†† PIR Motion Detectors
Advanced PIR body heat movement
sensor is suitable for indoor use.
Compatible with any alarm control panel.
Detect movement up to 12M angle 110°
Automatic temperature compensation to
improve performance when the ambient
heat level in a room changes.
Adjustable pulse count.
STAND TO SUIT
Adjustable stand-off.
OPTIONAL TRAFFIC COUNTER
Add a 4 digit counter.
ADDITIONAL BUZZER UNITS
Add extra alert extensions
10M connection cord included.
POWERED BY 12V TO 24Vdc
Power solution not included.
Two power packs are needed,
one for sender receiver.
Code
PIR5310
MOUNTING BRACKET
Suit PIR5310
Code
PIR5315
MOUNTING BRACKET
Suit PIR5308
Code
PIR5315
SMOKE DETECTOR
Sensor Type: Infrared Photoelectric Diode.
Dust and insect proof. White finish.
Detection Range 20m Sq.
12Vdc external power.
Suit alarm systems.
Code
ALM121
SMOKE DETECTOR TESTER
Designed for testing Ionisation and Photoelectric type.
Smoke alarms and detectors. Up to 200 sprays
100g net. CFC Free. Road transport Only.
Code
LIFLT711
05-17

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
†† Power Supplies
POWER PACKS 12V
12Vdc 2.1mm POSITIVE TIP
All 12Vdc 2.1mm Positive Tip Power packs.
Current Type Code
100mA Linear DCA100-12PM
400mA Switch Mode SMP400-12P
1000mA Switch-Mode SMP12V1A-21P
1500mA Switch Mode SMP1500-12-21P
2500mA Switch Mode SMP12V-2.5A-21R
5000mA Switch Mode SMP12V5A-21P
See Power Section for more types higher current.
CCTV POWER SUPPLY WALL MOUNT
18x 12Vdc @ 500mA OUTPUTS
150W Total. 18 outputs, individually
fused. 18 LED power indicators
for quick supply inspection. Screw
terminal connections lockable, two
keys supplied. Powder coated metal
housing. Input Voltage 240Vac.
Output Voltage 12Vdc 18x 500mA
(9A) 12A max.
Size Code
310x210x65mm PS12V15A18CH
POWER PACK 16VAC
WITH EARTH LEAD
Voltage 16Vac
Current 1500mA
Type AC+Earth
Code ACA1615QE
AC-DC CONVERTER
36Vac/dc - 12Vdc
Max 36V AC or DC input is
converted into 12VDC.
With 1 Amp max. Regulator.
DC PLUG WITH LEAD
Pre-made 1.8 metre lead with DC plug.
Plug Type Barrel Code
2.1mm Straight 9mm DCL2109ST
2.1mm Straight 12mm DCL2112ST
2.1mm R/Angle 9mm DCL2109RA
2.1mm R/Angle 12mm DCL2112RA
DC PLUG SCREW
2.1mm Positive Tip
Plug Code
2.1mm P422
DC SOCKET
Plug Code
2.1mm S423
DC SOCKET WITH LEAD
10cm Lead
Plug Code
2.1mm DCL2119ST
DC PLUG
Plug Code
2.1mm P423
DC SPLITTERS
Splits power 5 ways
Plug Code
2.1mm DCL5
DC TESTER
Although compact in size, this 5-in-1 Multi Purpose 12VDC Tester is
an essential product for installers who need to perform troubleshooting
tests while installing CCTV surveillance systems. The unit has a
selectable 500mA or 1A load, 4 individually lit LEDs to indicate the
strength of the voltage (Bad, Weak, Good, Excellent), two test status
indicators (Power, Overheat) and a DC jack input, allowing you to plug
the DC power jack directly into the tester for greater flexibility.
• The five tests which the unit can perform are:
• Voltage Test
• Load Test
• Voltage Drop Test
• PTC Fuse Test
• Polarity
Code
DCC101
Plug Code
2.1mm DCC100
CCTV POWER SUPPLY 19” RACK MOUNT
16 PORT RACK MOUNT
Professional power solution. Compact and efficient supply 16 outputs,
16x individually fused LED power indicators for quick supply
inspection. 1.8M power cable included.Size 515x260x128mm.
Output Channel Input Code
12VDC 10A 16CH 100-240VAC RPU121016
24VAC 10A 16CH 240VAC RPU241016
POWER PACK 24VAC
Details Code
Plug Pack ACA2410A
Inline ACA2410
Plug Code
2.1mm DCL8
Splits power 8 ways
05-18

RACK MOUNT POWER SUPPLY
• Compact 1RU power supply
• Fused input IDC 240Vac
• Illuminated input switch
• Individually fused outputs
• LED indicators on all outputs
• Screw terminals outputs
• 45x200x441mm 1U
Volts Current Out Code
24Vac 4A x4 RAC24-4A
24Vac 8A x8 RAC24-8A
12Vdc 4A x4 RDC12-4A
12Vdc 8A x8 RDC12-8A
12Vdc 12A x12 RDC12-12A
http://data.wescomponents.com/power/RDC12.pdf
http://data.wescomponents.com/power/RAC24.pdf
WALL MOUNT POWER SUPPLY
Volts Current Battery Out Code
24Vac 4A No x9 WAC24-4A
12Vdc 4A No x9 WDC12-4A
13.5Vdc 4A Yes x9 WBDC12-4A
SHOWN WITH OPTIONAL
SLA BATTERY BACKUP
SCREW TERMINAL
PROTECTED OUTPUTS
LED VOLTAGE DISPLAY
UPS POWER SUPPLY 100W
BATTERY BACKUP POWER SUPPLY
12VDC or 24VDC UPS Battery Charger System has been designed to be compact and extremely efficient.
Manufactured for back-up applications in industrial, telecoms, security and access control markets. These units
are built as a standalone power supply or to be connected to a lead acid battery to operate as a DC UPS.
• Extremely compact and efficient (small footprint)
• 1.2A charger able to charge up to 4 x 12V 7AH batteries
• Mains fail relay contact and LED
• Low battery relay contact and LED
• Reverse polarity protection on battery terminal
• Australian 240Vac 10A plug on input
• Batteries NOT supplied
Volts Current Code
12VDC 8A OPS12V8A
24VDC 4A OPS24V4A
• Lockable front door with Internal GPO recess
• LED Decimal voltage display on the front panel
• Short circuit Overload protection for each channel
• Individually fused outputs with LED status indicators
• WBDC12 Series has 12V/7Ah Battery Backup
• 92x362x235mm (24A = 120x435x345mm)
http://data.wescomponents.com/power/WAC24.pdf
http://data.wescomponents.com/power/WDC12.pdf
http://data.wescomponents.com/power/WBDC12.pdf
EXPANSION PCB
Use to repair, update or expand voltage outputs.
• Mains fail and low battery contacts and
On board charger (DC units Only)
Type Out Code
DC x9 ZPDC9WAYPCB
DC x16 ZPDC16WAYPCB
AC x16 ZPAC16WAYPCB
EXPANSION BOX
16 WAY AC/DC EXTERNAL EXTENSION BOX
• Short circuit overload protection
• Easy wall mountable covered enclosure
BATTERY BRACKET LEAD
Kit includes a holding bracket
and battery connection cable to
suit wall mounts and expansion
boards. Battery NOT included.
STEEL CABINET EMPTY
KEY LOCKED
92x362x235mm
painted metal cabinet.
With display hole.
Code
ZPCAB
Code
BT1Code
ZPEXTBOX
http://data.wescomponents.com/power/OPS.pdf
05-19

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
EASY
WIRE
BNC-Video / RCA-Audio / DC
One Neat Cable
RCA-Video / DC
†† Connection Cables
CAMERA EXTENSION LEADS
Length Code
10M VC310
17M VC324
Length Code
10M VC6710
15M VC6712
20M VC6713
VIDEO GROUND-LOOP ISOLATOR
Passive device for removing
common interference noise
caused by cable points with
different ground potentials
Built-in Transient Voltage
Suppressor surge protection
Eliminate tearing cross-talk
BNC COAX CCTV FIX
Code
VB001
Code
VB002
SECURITY CAMERA CABLE
Coax Video Cable 5x control
leads Colour coded, Combined
in one shielded cable. Suit
camera runs Door Intercoms.
Cream jacket.
5 CORE + 75Ω COAX 5x 14AWG Wires
Colour Coded
Double Shielded
AU Tin Foil
75 Ohm Coax
Video
IDEAL
CAMERAS
INTERCOMS
for connecting
etc.
Code
SEC7505
Code
SEC17505
SECURITY CAMERA CABLE RG59B/U
2 CORE + 75Ω COAX RG59
Coax Video Cable 2x Power
lead Colour coded, Combined
in one heavy-Duty cable.
Suit camera runs Door
Intercoms. Black jacket.
6.0mm
Code
SEC101
Code
SEC103
VIDEO COAX CABLE
Length Code
100M RG59AU
Length Code
100M RG59U
Length Code
100M RG6PE
Length Code
100M RG6Q100
PLUGS
Description Code
2.1mm Plug P421L
2.1mm Lead DCL2112RA
Description Code
Screw P651
R/Angle P653
Male» RCA Female AD230
Description Code
BNC Plug To BNC Plug 1.5 Metre 75 Ohm Coax VC201
BNC Plug To BNC Plug 3 Metre 75 Ohm Coax VC203
BNC Plug To BNC Plug 10 Metre 75 Ohm Coax VC210
RCA Plug To BNC Plug 1.5M 75 Ohm Coax VC6
RCA Plug To BNC Plug 3 metres 75 Ohm Coax VC6L
VIDEO POWER RCA
VIDEO RCA Plug-Plug
POWER 2.1mm Plug-Socket
AUDIO-VIDEO-POWER BNC
VIDEO BNC Plug-Plug
AUDIO RCA Plug-Plug
POWER 2.1mm Plug-Socket
WITH DVR FIX
Same as above with extra
filtering for digital noise
For DVR line noise, etc.
100M REEL
305M REEL
100M REEL
305M REEL
75Ω RG59AU 6mm MULTI-STRAND CORE
75Ω RG59U 6mm SINGLE-CORE PE FOAM
75Ω RG6 6.8mm SINGLE-CORE PE DUAL-SHIELD
75Ω RG6 7.5mm SINGLE-CORE PE QUAD SHIELD
DC PLUG
BNC PLUG
Solder types:
VIDEO BNC LEADS RCA LEADS
SECURITY CABLE - ACA APPROVED
Low voltage colour coded connection cable encased in a
0.5mm thick PVC jacket. Not twisted pairs. 100Vdc/32Vac
As used in security systems and telecommunications.
14x Strands 0.2mm=0.44mm². AS1125 AS/NZS3808
AustelApproved.
Length Core Colour Code
100M 4 Brown SEC414BR-100
100M 4 Grey SEC414GY-100
100M 4 White SEC414WH-100
SEE
CABLE
CONNECTORS
SECTION
SEE
CABLE
CONNECTORS
SECTION
05-20

†† Twisted Pair Video Transmission
PASSIVE TRANSCEIVER PAIR
GOOD FOR UP TO 300M
No power required.
Requires 24 AWG
or larger gauge
twisted pair cable.
In/Out Normal TV
Composite video
BNC Sockets I/O
DC-6MHz 1V 75Ω
60dB S/N 300M.
Just add twisted-
pair cable only.
Transmitter
Receiver supplied.
Code
VB101
ACTIVE TRANSCEIVER PAIR 12Vdc
GOOD FOR UP TO 1500M
Single twisted pair for convenient wiring,
low-cost cable, simple install, high
reliability, anti-interference, low noise.
Distance EQ switches for tuning.
BNC 1Vpp video input and outputs.
Bandwidth is 6MHz. Requires twisted
pair cable and 12Vdc power-pack.
Code
VB201
Code
DCA500-12PM
ACTIVE TRANSCEIVER PAIR 12Vdc/24Vac
With the addition of an active receiver to
the active transmitter, incredible distances
are achieved. Low cross talk. High noise
rejection. Excellent performance to cost ratio.
Earth connection for lightning safety. Suit
general composite colour video. Requires
12Vdc at BOTH ends. Requires Twisted-Pair
(Cat5) Cable. BNC I/O 1Vpp 75Ω DC-6MHz
Bandwidth. KIT includes a Transmitter
Receiver.
GOOD FOR UP TO 1500M
REQUIRES POWER X2
Code
VB202
Power can be transmitted through the cable.
PASSIVE RECEIVER PAIR CAT-5
DIRECT PLUG CAT-5 GOOD FOR 200 METRES
Converts standard composite video into
a balanced signal for transmission along
common twisted pair cables (CAT5/6 RJ45).
Colour video 200M+ and BW Video 300M+.
Code
VB860
Converts Video (BNC male)
to Balanced signal (RJ45)
for twisted pair runs. 2
Required for Transmit
Receive (1 at each end).
SOLD EACH
TWO ARE REQUIRED
One for Send and
One for receive.
MULTI-CHANNEL VIDEO BALUN
4 WAY BNC [CVBS] ON ONE CAT5
4CH Send/Receive in one
box (2x req.) Uses bare
wire terminated CAT5
cable. Requires a second
box at other end or run
individually to each camera
with our compatible VB101
baluns. No cable supplied.
(200M max.)
Code
VB9252
REQUIRES POWER x2
Power required at either end, or Power
can be sent via a 2nd cable pair. 12Vdc.
CCTV PASSIVE TRANSCEIVER VIDEO BALUN
GOOD FOR UPTO 300M
ABS fire retardant plastic. No power required. Requires 24 AWG or
larger gauge. Twisted pair cable In/Out Normal TV. Composite video
BNC Sockets I/O. DC-6MHz 1V 75Ω, 60dB S/N 300M. Just add
Twisted-pair cable Only (such as CAT5 or CAT6). Can be use as
Transmitter/Receiver. Installed directly to the camera video out put.
Baluns are sold individually. 2 pieces required, One for transmitter and
one for receiver. All three models are interchangeable with each other.
MINI-FAST CONNECTION
PASSIVE TRANSCEIVER
BNC male with Spring compression
terminals, easy to connect or disconnect
Code
VB102
FAST CONNECTION
WITH MINI-COAX PIGTAIL
Male BNC with extended 175mm pigtail.
Spring compression wire terminal
reduces wiring time.
Code
VB103
SCREW TERMINATION
PASSIVE TRANSCEIVER
Male BNC with extended
175mm pigtail. Screw terminal.
Code
VB100
SINGLE CHANNEL PASSIVE VIDEO BALUN PAIR
SOLD IN PAIRS
Full-motion CCTV video at
distances up to 330m when used
with any passive transceiver.
Up to 1500m with any active
UTP video receiver. Tool-less,
installs in seconds, no need to
strip the wires. NTSC, PAL, and
SECAM video formats. No power
required. 60dB crosstalk and
noise immunity. Compact size
and easy installation.
Code
VB115
05-21

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
CCTV OVER CAT-5/6 VIDEO BALUN
GOOD FOR UP TO 400M (Colour). NO POWER REQUIRED. OR UP TO 2.2Km WITH ACTIVE TRANSCEIVERS!
Passive balun technology to transmit colour composite video signal over twisted-pair cable up to an amazing 400 Metres with low image losses.
Boost this range up to several kilometres by using the active receiver and/or sender options available in various combinations outlined below.
Cost effective solution, easy quick. Using economical cables and giving excellent performance, high noise rejection maintaining the best signal.
UTP is Unshielded Twisted Pair. Category 2 or better, 16-24AWG, stranded or solid. eg. CAT5e. Note: STP, Shielded Twisted Pair is not suitable.
Each video signal uses just one twisted pair, so one CAT5 cable can be expanded to include further channels, audio, RS422/485, Ethernet, etc.
1 CHANNEL PASSIVE TRANSCEIVER STRAIGHT
Receive / Transmit video signals
over UTP cable with out using
power supply. Size: 32x21x15mm.
400M Distance.
Range Code
400M VB104LG
1 CHANNEL PASSIVE TRANSCEIVER RIGHT ANGLE
400M Distance
Range Code
400M VB104SH
1 CHANNEL PASSIVE TRANSCEIVER WITH COAX PIGTAIL
Receive / Transmit video signals over
UTP cable without using power supply.
Up to 400M Distance.
Size: 32x21x15mm.
175mm coax pigtail.
Range Code
400M VB105
4 CHANNEL PASSIVE TRANSCEIVER
Range Code
400M VB109
1 CHANNEL ACTIVE RECEIVER
GOOD UP TO 900M
Used to increase distance of a single
channel to up to 900M over twisted
pair cable. Compatible with any
transmitter. 12Vdc Req.
Power supply not included.
103x70x30mm.
Description Code
Active Receiver 900M VB111RX
12V 100mA Power Pack DCA100-12PM
INPUT ADAPTOR OPTIONS
CAMERA
BNC
IN
VIDEO
BNC
OUT
VB104LG All adaptors can be used as either
Transmitters OR Receivers
(Except VB111 VB113 Actives)
VB104SH
VB109
VB105
VIDEO OVER UTP CABLE
UP TO 400 METRES
FURTHER DISTANCES
USE THE ACTIVE UNITS
Connect each device by bare ended
UTP cable (Unshielded Twisted Pair)
Note: VB109 has RJ45 Requires RJ45
Plug to be connected to cable so ideal
for CAT5/6 quick connect installations.
OUTPUT ADAPTOR OPTIONS
VB104LG
VB109
VB105
VB111RX
CABLE SOLD SEPARATELY
PLEASE CONTACT US
OR SEE CABLE SECTION
VB110
VB110
4CH
16CH
900M
400M
VB111TX VB113TX
VB104SH
VB113RX
16 CHANNEL PASSIVE TRANSCEIVER
TRANSMIT OR
RECEIVE VIDEO
Receive / Transmit 16 video signals over UTP cable. 400M Distance.
Connects via either CAT5e RJ45 cables (x4) to VB109 or another
VB110 or individual screw terminal pairs for each to twisted pair cables
for VB104 and VB105. Size 1U 44x180x430mm (Brackets included)
16 Channels BNC Female in/out.
400M
Description Code
16CH RX/TX VB110
4 CHANNEL ACTIVE SENDER
WITH COMPENSATION
Active solution with signal boosting to compensate long runs.
Select between 3 gain levels for each of the 4 video inputs.
LED signal indication. RJ45 or Push-connect wiring outputs.
Metal cabinet. 180x70x25mm. Requires 12Vdc 100mA input.
Description Code
4CH Transmitter VB113TX
4 CHANNEL ACTIVE RECEIVER
WITH COMPENSATION
Active solution with signal processing to compensate long runs.
Brightness and sharpness levels for each of the 4 video inputs.
LED signal indication. RJ45 or Push-connect wiring inputs.
Metal cabinet. 180x70x25mm. Requires 12Vdc 100mA input.
Description Code
4CH Receiver VB113RX
1 CHANNEL ACTIVE SENDER
GOOD UP TO 900M
Used to increase distance of a single
channel to up to 900M over twisted
pair cable. Compatible with any
transmitter. Combine with VB111RX
for extending to 1200M. 12Vdc 100mA
Power supply not included.
103x70x30mm.
Description Range Code
Active Sender 1200M VB111TX
05-22

VIDEO POWER OVER CAT5
UP TO 100M MAX
CCTV PASSIVE VIDEO + POWER OVER CAT-5/6 BALUN
Extend Video signals Power over a single CAT5/6 cable.
Sold in pairs (Transmitter Receiver)
RJ45 socket for Cat-5/6 cable
BNC and 2.1mm DC connections.
Size 43x20x21mm.
Up to 100M distance.
CAT5/6 Cable required.
Range Code
100M VB106
CCTV VIDEO OVER UTP BALUN 1200 METRES
GOOD FOR DISTANCES UP TO 1200 METRES !
Transmit colour composite video signals up to 1200 metres in distance without image loss using common CAT5/6 or other UTP type cable.
This kind of video transferring method has many advantages; such as convenient economical wiring using low-cost cable with a simple install.
Boasts, high reliability, excellent anti-interference for maintaining a low noise image. Distance equaliser switches for tuning image optimisation.
Built in Linearity with Sharpness Brightness Control adjustments. Requires Unshielded-Twisted-Pair (UTP) Type Cable like CAT5/6, etc.
BNC Video I/O 1Vpp 75Ω DC-6MHz Bandwidth. 2x 12V DC power supplies are required for Transmitter Receiver (not included).
Baluns are sold individually. 2 pieces required
- One for transmitter and one for receiver.
Each unit requires a 12Vdc power solution.
Range Type Code
1200M Transmitter VB111TX
1200M Receiver VB111RX
INPUT / TRANSMITTER OUTPUT / RECEIVER
CAMERA
BNC
IN
VIDEO
BNC
OUT
Brightness
Sharpness
Distance EQ
FRONT FRONT
BACK
BACK
REQUIRES 12VDC REQUIRES UNSHIELDED TWISTED PAIR (UTP) CABLE
POWER SUPPLY
Code
DCA100-12PM
AUDIO VIDEO RS-485 OVER CAT5/6 BALUN 1200 METRES
TRANSMIT AV CONTROL FOR LONG DISTANCES WITHOUT SIGNAL DEGRADATION USING COMMON CAT5/6 CABLE
Transmit colour composite video signals over a kilometre in distance without image loss using common CAT5/6 or other UTP type cable.
This kind of video transferring method has many advantages; such as convenient economical wiring using low-cost cable with a simple install.
Boasts, high reliability, excellent anti-interference for maintaining a low noise image. Distance equaliser switches for tuning image optimisation.
Built in Linearity with Sharpness Brightness Control adjustments. Requires Unshielded-Twisted-Pair (UTP) Type Cable like CAT5/6, etc.
BNC Video I/O 1Vpp 75Ω DC-6MHz Bandwidth. 2x 12V DC power supplies are required for Transmitter Receiver (not included).
Baluns are sold individually. 2 pieces required
- One for transmitter and one for receiver.
Each unit requires a 12Vdc power solution.
Range Type Code
1200M Transmitter VB112TX
1200M Receiver VB112RX
OUTPUT / RECEIVER
CAMERA
BNC OUT /
AUDIO
RCA OUT

DATA
INPUT / TRANSMITTER
CAMERA
BNC IN /
AUDIO
RCA IN

DATA
POWER SUPPLY
Code
DCA100-12PM
CCTV PASSIVE VIDEO AUDIO + POWER OVER CAT-5/6 BALUN
Extend Video, Audio and Power over
a single CAT5/6e cable. Sold in pairs
(Transmitter Receiver)
RJ45 socket for Cat-5/6 Cable
BNC Video, RCA Audio and 2.1mm DC.
Size 43x20x21mm.
Up to 100M distance.
CAT5/6 Cable required.
Range Code
100M VB108
05-23

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
2.4G WIRELESS ADAPTOR
CONVERTS ANY CAMERA TO WIRELESS
Compact, direct connect for plugging on to the
back of any standard surveillance camera and
making it wireless. Easy! Includes BNC/RCA
adaptor. Requires any ZT Type Receiver. 12Vdc
Power a piggy pack cable for power feed
through to camera. Four Channel switchable.
Maximum of 2 cameras per system.
Code
ZT401
2.4G WIRELESS CAMERA - CH SWITCH
EXTRA TINY COLOUR CMOS
2.4GHz wireless colour camera with
channel selector switch. Uses power
saving CMOS sensor. Impressively small
22x24x28mm! Power to “9V” battery snap
or included 240Vac power pack. 1.5 Lux.
64° View. 80mA 8Vdc. 628x582(PAL)
Colour CMOS. Requires a “ZT” Receiver.
100M unobstructed range.
Code
ZT820T
2.4G WIRELESS CAMERA - SUPER MINI
EXTRA TINY COLOUR CMOS
2.4GHz wireless colour camera uses power
saving CMOS sensor. Impressively small
23x23x25mm! Power to “9V” battery snap or
included 240Vac power pack. 1.5 Lux. 64° View.
80mA 8Vdc. 628x582(PAL) Pixel CMOS. 380
TV Lines. Colour. Requires ZT707 Receiver.
100M unobstructed range.
Code
ZT811T
2.4G WIRELESS CAMERA - NIGHT OWL
DELUXE WEATHER PROOF CCD
High grade Sharp brand CCD SMA socket
for an external antenna or use the supplied
10cm antenna. Adjustable hood for sun
weather protection. IR Illuminated for Night
Good for 15M. 96x61mmØ Long-Throw
lens 39° FOV. ¼” CCD 420 TVL Sharp®
Colour Includes ball/socket base.
Code
ZT906T
2.4G WIRELESS CAMERA - FLUSH MOUNT
CCD - CEILING / WALL MOUNT
Premium Sharp brand CCD sensor.
Weather proof for outdoors. Impressively
built silver cast “Ball-In-Socket” 15 Adj.
Flush mounts into 50mm cavity. 80mm.
60 View. 420 Lines. 0 Lux (BW) 1
Lux (Colour). Includes 240Vac power
pack. Requires “ZT” Receiver. 100M
unobstructed range.
Code
ZT902T
Code
KIT830-707
†† Wireless Camera Systems
DUAL CAMERA KIT
Receiver supplied with two mini-
cameras and a remote control
to directly select or auto cycle
2 views. Connect to any TV or
Video for an instant surveillance
system. ZT705 2.4GHz Receiver
ZT820 CMOS Cameras X2
REMOTE SELECT
Code
KIT820C2-705
COMPUTER DVR KIT
Instantly converts a USB PC into
a wireless recorder system with
motion detection, that records any
movement Kit includes: ZT721 USB
Receiver ZT820 CMOS Camera
Camera power-pack
WWW SURVEILLANCE
Code
KIT820-721
CAMERA RECEIVER KIT KIT811-707
ZT707 Receiver with AV-RCA
Output for TV Connection. Paired
with a choice of popular wireless
cameras.
Code
KIT811-707
WIRELESS REVERSING CAMERA ADD-ON
Wireless colour video transmission
to existing car monitor. Includes
wireless Receiver which receives
video from number plate-mounted
camera. Easy installation for DIY
usage and great as an add-on to
existing monitor, GPS etc.
DESKTOP UNIT WITH REMOTE
Code
ARV2REC
EXCELLENT PRICED KITS
ZT707 Receiver with AV-RCA Output
for TV Connection. Paired with a
choice of popular wireless cameras.
Code
KIT906-707
ZT707 Receiver with AV-RCA Output
for TV Connection. Paired with a
choice of popular wireless cameras.
05-24

†† Reversing System
4.3” REVERSING CAMERA SYSTEM - WIRELESS
HARD WIRED OR WIRELESS
Replace your mirror with an LCD Screen!
Rear-view optical mirror with built-in 4.3” LCD.
Special anti-glare screen for best rear view.
Wireless colour video transmission module.
100° horizontal and 60° vertical viewing angle.
High definition CMOS colour camera. Monitor
Camera Kit includes camera mount, 1.2M
camera power harness, 2M monitor power
video harness, 2M Wireless Transmitter
harness, 5M Video extension cable. Monitor
297x80x18mm 275g.
Mounting bracket sits behind the
number plate and it is not visible.
UNIVERSAL CLIP-ON STYLE
4.3” REAR VIEW MIRROR MONITOR
Special anti-glare screen for eye sight protection, in
position of the original rear view mirror. Touch screen
button control. 2xRCA video input 16:9 480x272 pixels
12Vdc 275x77x23mm 295g. Dual video input to connect
VCD/DVD/TV/GPS and rear view camera. Automatically
connect to rear view system when reversing, ensure
parking safely. Includes extra long cabling and butterfly
camera. All metal Weather proof 1/3 sharp CCD colour
anti fog glass super mini butterfly camera with 420TVL,
Wide angle 170° minimum illumination 0.1lux. Wiring Kit
includes 5.5M camera video cable, 1M camera power
cable and 2M monitor cable.
Code
RV431
TOUCH BUTTON FUNCTION
7” REVERSING MIRROR LCD MONITOR
Replace your mirror with an LCD Screen! Rear-view optical mirror
with built-in Compact 7” colour LCD TFT Display screen. Replaces
your existing rear-view mirror. Adjust picture via the remote control
On-Screen-Display. 2 x RCA Video Input 480x234 pixels 12Vdc
248x110x43mm 400g. Includes extra long cabling and butterfly
camera. All metal Weather proof 1/3 sharp CCD colour anti fog
glass super mini butterfly camera with 420TVL, Wide angle 170°
minimum illumination 0.1lux. Wiring Kit includes 6M camera video
cable, 1M camera power cable and 2.4M monitor cable.
• AV1 connects VCD/DVD signal input. AV2 connects camera signal
input. AV2 will be switched automatically from VCD/DVD when
reversing gear is used and return back after parking.
Code
RV751
Code
ARV43M
5.0” DUAL REVERSING CAMERA SYSTEM
Code
ARV50M
5” Wired Rear View Mirror Kit with
Two Cameras for front and rear, or
car rear and caravan/trailor rear.
Butterfly Number-Plate mounting.
Visual 120 Deg. Angle. CMOS Low
Light Cameras Colour System PAL.
SUPPLIED WITH TWO CAMERAS
05-25

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
REVERSING CAMERA SYSTEM 3.5”
• 3.5” LCD Digital colour monitor
• Night vision colour CMOS camera
• 2 x video inputs
• DC 10- 15 VDC power
Size Code
3.5” G390
REVERSING CAMERA SYSTEM 4.3”
• 4.3” Colour TFT LCD Digital Monitor
• Night Vision low Lux Camera IP67
• 100° H / 60° V viewing angle
• Number plate mounting
• Cable kit supplied
Size Code
4.3” G427
REVERSING CAMERA SYSTEM 5”
• 5” Colour TFT LCD Digital Monitor
• 100° Horizontal
• 60° Vertical viewing angle
• Night Vision
Size Code
5” G500CK
CUBE CAMERA BW CMOS
COMPACT METAL CASE
Small in size cost!
45x40x40mm +Base
Weather resistant
All metal casing.
BW CMOS
320 x 240 pixel.
46dB. 0.2 Lux.
12Vdc 50mA
Code
LTC601BS
1/4” SONY COLOUR CCD CAMERA
• 12V 1/4” Sony Colour CCD Camera
• Waterproof Day/Night function
• Useable illumination: 0 Lux
• Built in IR LED - IR LED working distance: 5 Metres
• Water resistance: IP67
Code
G50CC
UNIVERSAL 24V CAMERA
• 24V 1/4” Sony Colour CCD Camera
• Waterproof Day/Night function
• Useable illumination: 0 Lux
• Built in IR LED - IR LED working distance: 5 Metres
• Water resistance: IP67
Code
G52CC
UNIVERSAL CAMERA
• Hi Resolution 1/4” Sony CCD Image sensor
• IP Rating: IP66
• 170 Degrees Diagonal Lens angle
• Operating Voltage: 12V
• Resolution: 480 TVL
Code
G60CC
UNIVERSAL CAMERA
• Hi Resolution 1/4” Sony CCD Image sensor
• IP Rating: IP66
• 170 Degrees Diagonal Lens angle
• Operating Voltage: 12V
• Resolution: 480 TVL
Code
G55CC
AERPRO MONITOR WITH WIRELESS CAMERA
4.3” Colour TFT LCD Monitor IP44
Wireless video connection system
Night Vision low Lux Camera IP67
100° H / 60° V viewing angle
Number plate mounting
Cable kit also supplied
Aerpro only. Not 2.4GHz.
AERPRO REVERSING CAMERA KIT
Code
G427R
05-26

SUPER-SMALL TAG MOUNT
45° Mounting bracket. Body rotates on
tag base to align. 130° Wide Angle FOV.
Very rugged for use on vehicles, etc.
Very compact 19x18mmØ. Includes 8M
video cable. Requires 12Vdc 40mA.
Hard wired power leads.
RCA Plug Video output.
2.0 Lux 6.35mm ¼” CMOS Colour NTSC.
WEATHER PROOF IP67
System NTSC
Code CM103
ULTRA-SMALL BW CMOS 15mm
This camera is seriously stealthy in
stature for security, or convenient
to stick it to your monitor! Very
Low-Power CMOS 1 Watt Two
connection sockets 2.1mm in.
12Vdc (Requires Powerpack).
RCA Composite Video out,
Standard BW 380 Line TV.
3.6mm. 3 Lux. CMOS.
TINY 15 x 15 x 15mm !
Code
KTK707B
LICENSE PLATE CAMERA
• Camera Type: CMOS
• 120/60 Degree viewing angle.
• Operating Voltage : 12V
• Camera IP Rating: IP67
• Camera Mount type: Number Plate
Code
G45C
BUTTERFLY CAMERA
Code
G31C
BUTTERFLY CAMERA
Butterfly Rearview Camera.
Aluminium case waterproof
for outdoor use. IP67 Standard.
Lens Angle 170° horizontal
90° vertical. Ultra bright night
vision Includes Power Wire and
5.5 Metre RCA Lead
Code
G30C
High quality OV7950 sensor
with good night vision 0.5
Lux. View of angle: 120°
Waterproof (IP67). Adjustable
butterfly mount. Includes 5.5M
Video Lead and 1.8M Lead for
12Vdc input.
HOLE-MOUNT CCD
Metal barrel. Flush mounting. As used
with Reversing kits. 28mm Hole mount
65mm deep. 1/3” CCD Colour 420 TVL
PAL/NTSC 628x582 pixels FOV 110°
Wide Angle 0 Lux IR Illuminated. 12Vdc
(2.1mm) RCA Video out. Includes drill
bit and connection cables.
WEATHER PROOF
System Code
NTSC CD102N
PAL CD102P
HOLE-MOUNT CMOS
Flush mounting as used
in our Reversing kits.
Metal barrel 25mm Hole
mount 45mm deep +lead
1/3” CMOS Colour 420
TVL PAL 628x582 pixels
FOV 92° Wide Angle
2.0 Lux 3.6mm 12Vdc
(2.1mm) RCA Video out.
WEATHER PROOF
HOLE-MOUNT CMOS IR
Weather proof flush mounting
as used with car Reversing
kits. Metal barrel 28mm Hole
mount 45mm deep +lead 1/3”
CMOS Colour 420 TVL PAL
628x582 pixels FOV 110°
Wide Angle 2.0 Lux (0 Lux)
12Vdc (2.1mm)
WITH IR ILLUMINATION
System Code
PAL CM101P
System Code
PAL CE100P
REVERSING CAMERA KIT
380TVL CCD CAMERA W? LEADS
Kit includes 25mm hole camera
1.5M DC Lead to bare wire for
connection to reversing lamp.
5M Video Lead RCA to RCA.
and bonus 25mm drill bit to suit.
IP68 Metal barrel CCD 380TVL
PAL with 92° FOV and 3LUX
Code
CAM278
FLUSH MOUNT CAMERA
• Flush mount rear-view Camera
• Aluminium case waterproof for outdoor use
• Lens Angle 170 degree horizontal 90 degree vertical
• Ultra bright night vision
• 18.5mm Drill bit for installation included
Code
G35C
05-27

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
SD Card
Included
†† DVR System All-In-One
DVR CAR RECORDER WITH GPS TRACKING G FORCE SENSOR
New DVR Camera with inbuilt GPS tracking feature. With its bright 2.7” LCD
screen, it gives instant feedback as it is recording, and the user can also replay
recorded video. The unit is mounted using the windscreen mount that has
the inbuilt GPS antenna for tracking exactly where the video is taking place.
Support Micro SD card up to 32GB (Bonus 4GB Micro SD Card is included),
that will give the user many hours of recording.
Full HD 1920x1080p
GPS Module Built Into Holder
2.7” TFT LCD
4x Digital Zoom
IR LED Night Vision
170 Degree Ultra Wide Angle
Seamless Cycle Recording
Date/Time Stamp
Motion Detection Recording
Video Format: MOV/H.264
Audio microphone recorded
HDMI/USB2.0/AV-Out Interface
4GB Micro Sd Card Included
12Vdc Accessories Powered
Code
HDVR265H
DVR CAR RECORDER
ROAD SAFETY RECORDER 1.3M CAMERA RECORDER
2.5” LCD Screen with a high definition video recording camera and 6
LED night illumination. Cycled recording so will hold the last, say 15min
of recording. Includes SD card 4GB. Support Loop Recording Motion
Detection function. In-built microphone for sound recording. Li-ion
rechargeable battery and 12V car charger. Mini USB 2.0 interface for file
transfer. 120° viewing angle. 107x62.x33mm plus windscreen stand.
2.5” TFT LCD 270 degree rotation.
1/4 color CMOS HD 1.3M Image Sensor.
Recording resolution: 1280x960/720x480/640x480 pixels.
AVI video format for file storage
Automatic recording after power up.
Repeat storage by section- 2/5/15 minutes.
Supports SD card (From 2GB to 32GB ).
Power source: Li-ion rechargeable battery.
Code
DVR308
†† Surveillance Misc
DVR CAMERA
STAND-ALONE MOTION RECORDER MICRO-SD
Stand-alone, battery operated, cordless.
CMOS Camera and Motion Detector. Records
when motion detected for reviewing later
from reading the Micro SD memory card
(4Gb card Supplied) via USB or card reader,
etc. Efficient Operation - Records only when
motion is detected. IR LEDs ensure day night
operation. 10M effective audio range. Easily
review footage on a PC. Inbuilt rechargeable
battery operated. Includes Micro-USB charger.
Compact 70x30x40mm. 1/4” Mounting socket.
Desk stand included.
Code
DVR902
• GPS Tracking: Allows the user to track the vehicle’s position, speed, time, and date.
The GPS data can be displayed on PC playback using the software provided.
05-28

EXTREME ACTION SPORTS PVR
RECORDS THE ACTION
For the ultimate adrenaline rush seeker! No matter
the conditions this all-terrain, digital video camera
allows you to capture all the action on the move! From
skateboarding and snowboarding, to rock climbing and
skydiving, the possibilities are endless! Compact and
unobtrusive for inside vehicle mount or seal it inside the
waterproof casing for helmet or handlebar mounting out
in the elements. Inbuilt rechargeable batteries charges
through mini-usb cable for connection to download
movies and images to your PC, etc. Includes several
mounting base options including wind screen suction cup,
handlebar clamp and helmet strap with quick release.
Requires Micro-SD card 4Mb and up. Now available in
both standard and high definition models.
• Compact portable camera
• Includes mounting options
• Water resistant up to 3 meters
• Touch screen for easy setup
SPORTS CAMERA 1.3M
Truly compact model weighing only 48g (plus case and base). Preset
switch for simple one-button operation. Easy set-up touch screen. Up
to 60fps in VGA for excellent motion capture or natural image quality
at 720p. Requires Micro-SD Card.
• Mini-USB Socket
• Micro-SD (Not Inc.)
• 2.0” Touch Screen
• 3 Mounting Bases
TVL 720p
LCD 2.0”
Size 66x45x25mm
Code GS7
SPORTS CAMERA 5.0M
The new high def model offers 1080p recording at 60 frames per
second, and even up to 120fps in VGA, so this Sports Camera records
smoother video with true to life image clarity and more detail for slow
motion playback, sharper freeze frames and blur free playback on
even the most extreme sports. Playback directly to TV via HDMI.
Requires Micro-SD Card.
• Mini-HDMI Socket
• Mini-USB Socket
• Micro-SD (Not Inc.)
• IR Remote Control
• 2.4” Touch Screen
• 4 Mounting Bases
TVL 1080p
LCD 2.4” Touch
Size 75x52x33mm
Code GS8
†† Sports Cameras
05-29

Phone: 02-9798-9233 Fax: 02-9798-0017
Phone: 02-9798-9233 Fax: 02-9798-0017
†† Snake Inspection Cameras
SNAKE INSPECTION CAMERA USB
Code
USB206
REQUIRES LAPTOP
IR Illuminated camera connects to USB
Computer as a WEBCAM for viewing.
Camera VGA CMOS 640x480px
Lens Field Of View 54°
Focus 60mm to Infinite
Neck 600mm x 8.5mmØ
Tip 50x14mmØ
Total 880mm Long
SNAKE INSPECTION CAMERA 2.4”
INLINE STYLE 480x234px
1 Metre long metal gooseneck 7mmØ
9mmØ CMOS Camera FOV 45°
LED Illuminated brightness adjust
IP67 Submersible head neck
200x85x60mm casing
2.4” LCD 234x480px
Hook, mag, mirror tips
Requires 4x “AA”
Code
G6000
SNAKE INSPECTION CAMERA 2.7”
RECORD ZOOM 640x480px
263x86x49mm casing
2.7” LCD 640x480px
Requires 4x “AA”
Recordable image VGA
Requires MicroSD card
USB video file transfer
Video RCA Output
Code
G8000
SNAKE INSPECTION CAMERA 2.5” WIRELESS
REMOVABLE MONITOR WITH CONTROL
195x165x55mm pistol casing
Detachable wireless monitor
2.4” LCD 234x480px
Pistol Requires 4x “AA”
Monitor inbuilt rechargeable
Mains charger included
Code
G9000
SNAKE INSPECTION CAMERA 3.5” WIRELESS
Code
G9500HC
1 METRE GOOSENECK
EXTENSION CABLE
Suits G6000, G8000, G9000, G9500HC
Code
EC1
CAMERA HEAD UPGRADE
5.8mm DIAMETER HEAD 1M LONG
Code
CH58
RECORDING ZOOM WITH CARRY CASE
195x165x55mm pistol casing
Detachable wireless monitor
3.5” LCD 640x480px
Pistol Requires 4x “AA”
Monitor inbuilt rechargeable
Mains charger included
Recorder function to
MicroSD Card required.
Video output to RCA
USB for file transfer
Digital zoom. OSD.
Includes carry case.
Extra flexible camera
head solution. IP65.
640x480px CMOS CCD
SNAKE INSPECTION CAMERA WIFI
USE A SMART PHONE AS THE VIEWING SCREEN
• WIFI transmission, supports iPhone, iPad and Android devices
• Mini 9mm water-proof Camera with 1 metre flexible extended tube.
• Video recording and photo capture capability 3x Zoom capability
• Adjustable brightness on lens mounted LED light
• Hook, Mirror, Magnet included
• Requires 4x AA Batteries
• IP67 Waterproof
• Includes travel case
Code
G6900
05-30

IR SPOT-LIGHT FOR CAMERAS
Assists cameras with extra
illumination. Low profile as light
is Invisible Infra-Red 18x High
power LEDs Water proof housing
Black. Metal 45x27mm. Glass
faced lens. About 5 metres
range. All angles swivel base.
Auto On Light sensor. Requires
12Vdc 200mA
ILLUMINATE SURVEILLANCE
Code
IR3650
PIGGY-BACK IR SPOTLIGHT
Assists cameras with extra illumination.
Removable right angle bracket suit
alignment with existing camera mounting
system. Invisible Infra-Red 20x High
power LEDs Water proof housing IP68
Silver. Metal 45x27mm. Glass faced lens.
About 10 metres range. Auto On Light
sensor. Requires 12Vdc 450mA
Code
IR9140A
†† IR Spot Lights
WEATHER-PROOF 15W
LED 90M
Power 12V 15Wmax
Size 136x116mmØ
Code IR9105
12x Extra Large LEDs
Wall or ceiling mount.
IP66 Aluminium enclosure.
FLOOD-LIGHT STYLE 16W
Heavy-duty aluminium enclosure
IP66 weather proof sealed. ~60°
Super Bright IR LEDs 8-14µ
LED x114 x198
Power 12V 16W 12V 28W
Size 150x120x88mm 200x143x88mm
Distance 80M 130M
Code IR9107 IR9108
ALARM WARNING SIGNS
A4 STICKERS x4
Size 210x300mm
Code ALM221
A3 CCTV SIGN
Size 420x300mm
Code ALM222
A5 CCTV SIGN
Rear adhesive Stickers.
Size 100x130mm
Code ALM223
LED FLOOD LIGHT LAMPS
HIGHLY ENERGY EFFICIENT 10W TO 50W
IP65 highly energy efficient LED flood light. Ultra long life EPISTAR chipset. A great replacement for halogen lamps. Alluminium alloy material
with mounting assembly. Special design alluminium reflector improves light uniformity and luminous flux. Safe to use for indoor or outdoor
applications, can be positioned at any angle. Suitable for a wide range of applications. 150° beam angle. 240Vac (85 - 260Vac) input voltage.
Energy
IP65
saver
ALM223
ALM222
ALM221
Voltage Case Watt Colour Colour Temp Lumens Size Code
12Vdc Black 10W Natural White 4500 - 5000K 600 86x114x90mm LED1201-1045
240Vac Grey 10W Warm White 2900 - 3200K 500 86x114x90mm LED2401-1030GY
240Vac Black 10W Warm White 2900 - 3200K 500 86x114x90mm LED2401-1030BK
240Vac Grey 10W Cool White 6000 - 7000K 600 86x114x90mm LED2401-1070GY
240Vac Black 10W Cool White 6000 - 7000K 600 86x114x90mm LED2401-1070BK
05-31

Security and surveillance solutions

Security and surveillance solutions

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (14)

Destaque

Destaque (7)

Semelhante a Security and surveillance solutions

Semelhante a Security and surveillance solutions (20)

Mais de Wagner Electronic Services

Mais de Wagner Electronic Services (8)

Último

Último (20)

Security and surveillance solutions