Enviar pesquisa
Carregar
Introduction to safety & health osha
•
6 gostaram
•
1,831 visualizações
W
WKCTC
Seguir
Educação
Denunciar
Compartilhar
Denunciar
Compartilhar
1 de 33
Recomendados
saftey and health
saftey and health
Chris Shriver
Teaching students categories of workplace safety and responsibility.
Work place safety
Work place safety
Sue Fox
safety at work awards welding edition. DOWNLOAD IT AND SHARE IT
safety at work awards > the winner is welding edition
safety at work awards > the winner is welding edition
Mike Walberg
Visit our website: http://www.sacsconsult.com.au/ Vist us on LinkedIn: http://www.linkedin.com/company/sacs-consulting
Safety at Work
Safety at Work
SACS Consulting
Health & Safety
Safety @ Work
Safety @ Work
Nuwan Darshana
Health and safety at work
Health and safety at work
Reece Hancock
This presentation will be of help to teachers and students taking TLE-CHS 9.
Occupational health and safety (ohs) policy
Occupational health and safety (ohs) policy
Christine May Petajen-Brillantes
Workplace hazards
Workplace hazards
safereps
Recomendados
saftey and health
saftey and health
Chris Shriver
Teaching students categories of workplace safety and responsibility.
Work place safety
Work place safety
Sue Fox
safety at work awards welding edition. DOWNLOAD IT AND SHARE IT
safety at work awards > the winner is welding edition
safety at work awards > the winner is welding edition
Mike Walberg
Visit our website: http://www.sacsconsult.com.au/ Vist us on LinkedIn: http://www.linkedin.com/company/sacs-consulting
Safety at Work
Safety at Work
SACS Consulting
Health & Safety
Safety @ Work
Safety @ Work
Nuwan Darshana
Health and safety at work
Health and safety at work
Reece Hancock
This presentation will be of help to teachers and students taking TLE-CHS 9.
Occupational health and safety (ohs) policy
Occupational health and safety (ohs) policy
Christine May Petajen-Brillantes
Workplace hazards
Workplace hazards
safereps
BOS 4025, OSHA Standards 1 Learning Objectives Upon completion of this unit, students should be able to: 1. Describe the organizations and processes created by the OSHAct. 2. Explain employer and employee rights and responsibilities under the OSHAct. 3. Characterize OSHA’s workplace inspection policies and procedures. 4. Compare and contrast similarities and differences between Federal and State OSHA Plans. 5. Explain and analyze the requirements of the OSHA’s Recordkeeping Standard. Unit Lesson On April, 28, 1971, the Secretary of Labor had a daunting task in front of him. The Williams-Steiger Occupational Safety and Health Act (OSHAct), which had been signed into law by President Nixon on Dec 29, 1970, went into effect, and the Secretary now had a two-year window to develop and publish workplace safety standards that would cover five million workplaces in the United States. Paul Guenther was appointed the first Assistant Secretary of Labor for Occupational Safety and Health, and OSHA was “born” (U.S. Department of Labor, 2009). Paragraph 6a of the OSHAct allowed OSHA to use the two-year period to adopt and enforce a number of voluntary standards already in use by many industries. The initial standards came from several sources: 1. Consensus standards, which are developed by organizations such as the National Fire Protection Association (NFPA) or the American National Standards Institute (ANSI), can then be adopted by the industry. Many of the more familiar OSHA standards, such as Means of Egress, Flammable and Combustible Liquids and Powered Industrial Trucks, came from consensus standards (Teeples, 2007). 2. Proprietary standards, which are developed by professional experts within a specific industry and then agreed upon and adopted by that industry, An example is the Compressed Gas Associations pamphlet P-1, “Safe Handling of Compressed Gases” (Teeples, 2007). 3. Federal laws already in effect when the OSHAct become law; examples include the Federal Supply Contracts Act and the Contract Work Hours and Safety Standards Act. Using this approach, OSHA was able to have a comprehensive set of standards in place well before the two-year window closed. OSHA also recognized that some industries, such as construction and maritime, had their own unique set of safety concerns that would not be relevant to other industries, so OSHA created what are sometimes called “vertical standards.” The General Industry Standards promulgated in 29 CFR Reading Assignments See information below. Supplemental Reading See information below. Learning Activities (Non-Graded) See information below. Key Terms 1. Annual summary 2. Citation classification 3. First-aid injury 4. National Institute for Occupational Safety and Health (NIOSH) 5. OSHA 300 Log 6. OSHA Form 300A 7. OSHA Form 301 8. OSHA State Plan 9. Occupational Safety and Health Rev ...
BOS 4025, OSHA Standards 1 Learning Objectives .docx
BOS 4025, OSHA Standards 1 Learning Objectives .docx
arnit1
An introduction to OSHA
1-Introduction to OSHA.ppt
1-Introduction to OSHA.ppt
Jonah Reyes
A new rule (set of rules) coming from OSHA regulating exposure to silica dust from workers in construction, oil and gas and other industries.
Federal Register - New OSHA Silcia Dust Rule - March 2016
Federal Register - New OSHA Silcia Dust Rule - March 2016
Marcellus Drilling News
Good 1-2 hour module
Introduction to OSHA
Introduction to OSHA
John Newquist
Comparison of US and India Health and Safety Regulations
Comparison of US and India Health and Safety Regulations
Comparison of US and India Health and Safety Regulations
Kartik Vora
OSH - Legal Requirements
OSHConstructionLecture_Legal Requirements .pdf
OSHConstructionLecture_Legal Requirements .pdf
HASMANIRA
According to OSHA statistics, workers who operate machinery suffer approximately 18,000 amputations, lacerations, crushing injuries, abrasions and more than 800 deaths per year. This presentation details OSHA/ANSI regulations and steps to prevent injuries and deaths.
Why Safeguard Industrial Machinery?
Why Safeguard Industrial Machinery?
O'Connell Public Relations/Marketing
Deals with the important of consensus standards in OSHA compliance.
Consensus Standards
Consensus Standards
Anna Jolly
INTRODUCTION TO OSH LEGISLATION, INTRODUCTION TO OSH FRAMEWORK, UPDATES OF OSH ACTS, UPDATES OF OSH REGULATIONS, UPDATES OF OSH SUPPORT DOCUMENTS CONCLUSION
Seminar Cakna KKP - Latest Update Osh Law
Seminar Cakna KKP - Latest Update Osh Law
Moon Girl
Risk Assessment
Risk Assessment
Adam Killian
LIVING WITH THE EARTH Objectives for this Chapter A student reading this chapter will be able to: 1. Discuss how a law is made and describe the system of environmental laws. 2. List and describe the major components of the major federal environmental laws including: RCRA, CERCLA, EPCRA,SARA Title III, Pollution Prevention Act, CAA, CWA, SDWA, stormwater regulations, pesticide regulations, and underground storage tank regulations. Objectives for this Chapter A student reading this chapter will be able to: 3. Describe and discuss the major components of environmental compliance. The Making of a LawBill is first introduced into house and senate;Referred to subcommittee for review and support;90% fail at this levelRecommended bills are brought forward for hearings and comment;Committee meets to mark up (discuss) bill and vote on it;If still found favorable, bill is sent to full chamber; The Making of a Law (cont.)The bill is then sent to the Rules committee of House where a time limit is set for debate and other rules are set.The bill is also sent to the Senate where unrelated riders may be attached to a popular bill.House and Senate usually make changes in the bill before passing, and the different versions are sent to a conference committee for resolution. SENATE HOUSE Rules committee Senate version House version CONFERENCE COMMITTEE BILL BILL BILL The Making of a Law (cont.)If a resolution is accepted and the same version is approved by both House and Senate, the bill moves forward to the President who may sign or veto it.Congress can override a veto by 2/3rds majority, but this is difficult to do. CONFERENCE COMMITTEE SENATE HOUSE If both Chambers approve final version, the bill is sent forward to the president Veto? Sign? PRESIDENT BILL Common Themes Among Environmental LawsEIGHT GENERIC COMPLIANCE OBLIGATIONS1. Notification requirements2. Discharge or waste controls3. Process controls and pollution prevention4. Product controls5. Regulation of activities6. Safe transportation requirements7. Response and remediation requirements8. Compensation requirements Environmental Laws are Part of a SystemENVIRONMENTAL LAW ENCOMPASSES ALL THE ENVIRONMENTAL PROTECTION THAT COMES FROM:U.S. CONSTITUTION AND STATE CONSTITUTIONSFEDERAL AND STATE STATUTES AND LOCAL ORDINANCESREGULATIONS PUBLISHED BY FEDERAL, STATE AND LOCAL AGENCIESPRESIDENTIAL EXECUTIVE ORDERSCOURT DECISIONS INTERPRETING THESE LAWSTHE COMMON LAW Executive OrdersThese are orders issued by the president and require federal facilities to comply and provide leadership in protecting the environment. More than 18 executive orders have been issued since 1970. Common LawA body of rules and principles that pertain to the government and the security of persons and property.Basic rules originally developed in England and then brought to American Colonies. Under Common LawTortA private wrong or wrongful act for which the injured party c ...
LIVING WITH THE EARTHObjectives for this C.docx
LIVING WITH THE EARTHObjectives for this C.docx
croysierkathey
Final_AAH1601_Patient Safety Fundamentals for Healthcare Architects (JK rev4 ...
Final_AAH1601_Patient Safety Fundamentals for Healthcare Architects (JK rev4 ...
JKreidich
New OSHA fall protection regulations have been drafted to update walking-working surfaces and personal protective equipment requirements. This webinar provides an overview of the proposed changes to OSHA's 1910 general industry regulations.
Overview of Proposed Changes to OSHA 1910 General Industry Regulations
Overview of Proposed Changes to OSHA 1910 General Industry Regulations
LJB Inc.
Health and safety at work
Health and safety at work
Health and safety at work
Kamit Patel
occupational safety and Health Administration
osha ppt old.ppt
osha ppt old.ppt
VandanaAgrawa1
Construction l2u201 worksheet_1_learner
Construction l2u201 worksheet_1_learner
iancollins666
Global Harmonization System
Global Harmonization System by Safety Law
Global Harmonization System by Safety Law
Atlantic Training, LLC.
CODIGO ANSI
Ansi.a14.2.1990
Ansi.a14.2.1990
Ruben Ruiz
VIEW & RE-VIEW; TRIAL & ERROR; THE WAY OF LEARNING-BUT NOT FOR MANAGERS... muhammadakhlaqkhan@yahoo.com
Standards Regulations
Standards Regulations
Muhammad Akhlaq Khan
A tool for assessing a facility’s compliance with the Occupational Safety and Health Administration (OSHA) regulations at 29 CFR 1926 and the general recordkeeping requirements of 29 CFR 1904 Users of This Guide Include • General construction and demolition contractors • Specialty construction contractors and developers • Construction and state inspectors • Engineering consultants • Utility and larger corporations • And many more…
OSHA Auditing: Federal Compliance: Construction: The Complete Health and Safe...
OSHA Auditing: Federal Compliance: Construction: The Complete Health and Safe...
Specialty Technical Publishers
Chapter 2
Chapter 2
WKCTC
Chapter 2
Chapter 2
WKCTC
Mais conteúdo relacionado
Semelhante a Introduction to safety & health osha
BOS 4025, OSHA Standards 1 Learning Objectives Upon completion of this unit, students should be able to: 1. Describe the organizations and processes created by the OSHAct. 2. Explain employer and employee rights and responsibilities under the OSHAct. 3. Characterize OSHA’s workplace inspection policies and procedures. 4. Compare and contrast similarities and differences between Federal and State OSHA Plans. 5. Explain and analyze the requirements of the OSHA’s Recordkeeping Standard. Unit Lesson On April, 28, 1971, the Secretary of Labor had a daunting task in front of him. The Williams-Steiger Occupational Safety and Health Act (OSHAct), which had been signed into law by President Nixon on Dec 29, 1970, went into effect, and the Secretary now had a two-year window to develop and publish workplace safety standards that would cover five million workplaces in the United States. Paul Guenther was appointed the first Assistant Secretary of Labor for Occupational Safety and Health, and OSHA was “born” (U.S. Department of Labor, 2009). Paragraph 6a of the OSHAct allowed OSHA to use the two-year period to adopt and enforce a number of voluntary standards already in use by many industries. The initial standards came from several sources: 1. Consensus standards, which are developed by organizations such as the National Fire Protection Association (NFPA) or the American National Standards Institute (ANSI), can then be adopted by the industry. Many of the more familiar OSHA standards, such as Means of Egress, Flammable and Combustible Liquids and Powered Industrial Trucks, came from consensus standards (Teeples, 2007). 2. Proprietary standards, which are developed by professional experts within a specific industry and then agreed upon and adopted by that industry, An example is the Compressed Gas Associations pamphlet P-1, “Safe Handling of Compressed Gases” (Teeples, 2007). 3. Federal laws already in effect when the OSHAct become law; examples include the Federal Supply Contracts Act and the Contract Work Hours and Safety Standards Act. Using this approach, OSHA was able to have a comprehensive set of standards in place well before the two-year window closed. OSHA also recognized that some industries, such as construction and maritime, had their own unique set of safety concerns that would not be relevant to other industries, so OSHA created what are sometimes called “vertical standards.” The General Industry Standards promulgated in 29 CFR Reading Assignments See information below. Supplemental Reading See information below. Learning Activities (Non-Graded) See information below. Key Terms 1. Annual summary 2. Citation classification 3. First-aid injury 4. National Institute for Occupational Safety and Health (NIOSH) 5. OSHA 300 Log 6. OSHA Form 300A 7. OSHA Form 301 8. OSHA State Plan 9. Occupational Safety and Health Rev ...
BOS 4025, OSHA Standards 1 Learning Objectives .docx
BOS 4025, OSHA Standards 1 Learning Objectives .docx
arnit1
An introduction to OSHA
1-Introduction to OSHA.ppt
1-Introduction to OSHA.ppt
Jonah Reyes
A new rule (set of rules) coming from OSHA regulating exposure to silica dust from workers in construction, oil and gas and other industries.
Federal Register - New OSHA Silcia Dust Rule - March 2016
Federal Register - New OSHA Silcia Dust Rule - March 2016
Marcellus Drilling News
Good 1-2 hour module
Introduction to OSHA
Introduction to OSHA
John Newquist
Comparison of US and India Health and Safety Regulations
Comparison of US and India Health and Safety Regulations
Comparison of US and India Health and Safety Regulations
Kartik Vora
OSH - Legal Requirements
OSHConstructionLecture_Legal Requirements .pdf
OSHConstructionLecture_Legal Requirements .pdf
HASMANIRA
According to OSHA statistics, workers who operate machinery suffer approximately 18,000 amputations, lacerations, crushing injuries, abrasions and more than 800 deaths per year. This presentation details OSHA/ANSI regulations and steps to prevent injuries and deaths.
Why Safeguard Industrial Machinery?
Why Safeguard Industrial Machinery?
O'Connell Public Relations/Marketing
Deals with the important of consensus standards in OSHA compliance.
Consensus Standards
Consensus Standards
Anna Jolly
INTRODUCTION TO OSH LEGISLATION, INTRODUCTION TO OSH FRAMEWORK, UPDATES OF OSH ACTS, UPDATES OF OSH REGULATIONS, UPDATES OF OSH SUPPORT DOCUMENTS CONCLUSION
Seminar Cakna KKP - Latest Update Osh Law
Seminar Cakna KKP - Latest Update Osh Law
Moon Girl
Risk Assessment
Risk Assessment
Adam Killian
LIVING WITH THE EARTH Objectives for this Chapter A student reading this chapter will be able to: 1. Discuss how a law is made and describe the system of environmental laws. 2. List and describe the major components of the major federal environmental laws including: RCRA, CERCLA, EPCRA,SARA Title III, Pollution Prevention Act, CAA, CWA, SDWA, stormwater regulations, pesticide regulations, and underground storage tank regulations. Objectives for this Chapter A student reading this chapter will be able to: 3. Describe and discuss the major components of environmental compliance. The Making of a LawBill is first introduced into house and senate;Referred to subcommittee for review and support;90% fail at this levelRecommended bills are brought forward for hearings and comment;Committee meets to mark up (discuss) bill and vote on it;If still found favorable, bill is sent to full chamber; The Making of a Law (cont.)The bill is then sent to the Rules committee of House where a time limit is set for debate and other rules are set.The bill is also sent to the Senate where unrelated riders may be attached to a popular bill.House and Senate usually make changes in the bill before passing, and the different versions are sent to a conference committee for resolution. SENATE HOUSE Rules committee Senate version House version CONFERENCE COMMITTEE BILL BILL BILL The Making of a Law (cont.)If a resolution is accepted and the same version is approved by both House and Senate, the bill moves forward to the President who may sign or veto it.Congress can override a veto by 2/3rds majority, but this is difficult to do. CONFERENCE COMMITTEE SENATE HOUSE If both Chambers approve final version, the bill is sent forward to the president Veto? Sign? PRESIDENT BILL Common Themes Among Environmental LawsEIGHT GENERIC COMPLIANCE OBLIGATIONS1. Notification requirements2. Discharge or waste controls3. Process controls and pollution prevention4. Product controls5. Regulation of activities6. Safe transportation requirements7. Response and remediation requirements8. Compensation requirements Environmental Laws are Part of a SystemENVIRONMENTAL LAW ENCOMPASSES ALL THE ENVIRONMENTAL PROTECTION THAT COMES FROM:U.S. CONSTITUTION AND STATE CONSTITUTIONSFEDERAL AND STATE STATUTES AND LOCAL ORDINANCESREGULATIONS PUBLISHED BY FEDERAL, STATE AND LOCAL AGENCIESPRESIDENTIAL EXECUTIVE ORDERSCOURT DECISIONS INTERPRETING THESE LAWSTHE COMMON LAW Executive OrdersThese are orders issued by the president and require federal facilities to comply and provide leadership in protecting the environment. More than 18 executive orders have been issued since 1970. Common LawA body of rules and principles that pertain to the government and the security of persons and property.Basic rules originally developed in England and then brought to American Colonies. Under Common LawTortA private wrong or wrongful act for which the injured party c ...
LIVING WITH THE EARTHObjectives for this C.docx
LIVING WITH THE EARTHObjectives for this C.docx
croysierkathey
Final_AAH1601_Patient Safety Fundamentals for Healthcare Architects (JK rev4 ...
Final_AAH1601_Patient Safety Fundamentals for Healthcare Architects (JK rev4 ...
JKreidich
New OSHA fall protection regulations have been drafted to update walking-working surfaces and personal protective equipment requirements. This webinar provides an overview of the proposed changes to OSHA's 1910 general industry regulations.
Overview of Proposed Changes to OSHA 1910 General Industry Regulations
Overview of Proposed Changes to OSHA 1910 General Industry Regulations
LJB Inc.
Health and safety at work
Health and safety at work
Health and safety at work
Kamit Patel
occupational safety and Health Administration
osha ppt old.ppt
osha ppt old.ppt
VandanaAgrawa1
Construction l2u201 worksheet_1_learner
Construction l2u201 worksheet_1_learner
iancollins666
Global Harmonization System
Global Harmonization System by Safety Law
Global Harmonization System by Safety Law
Atlantic Training, LLC.
CODIGO ANSI
Ansi.a14.2.1990
Ansi.a14.2.1990
Ruben Ruiz
VIEW & RE-VIEW; TRIAL & ERROR; THE WAY OF LEARNING-BUT NOT FOR MANAGERS... muhammadakhlaqkhan@yahoo.com
Standards Regulations
Standards Regulations
Muhammad Akhlaq Khan
A tool for assessing a facility’s compliance with the Occupational Safety and Health Administration (OSHA) regulations at 29 CFR 1926 and the general recordkeeping requirements of 29 CFR 1904 Users of This Guide Include • General construction and demolition contractors • Specialty construction contractors and developers • Construction and state inspectors • Engineering consultants • Utility and larger corporations • And many more…
OSHA Auditing: Federal Compliance: Construction: The Complete Health and Safe...
OSHA Auditing: Federal Compliance: Construction: The Complete Health and Safe...
Specialty Technical Publishers
Semelhante a Introduction to safety & health osha
(20)
BOS 4025, OSHA Standards 1 Learning Objectives .docx
BOS 4025, OSHA Standards 1 Learning Objectives .docx
1-Introduction to OSHA.ppt
1-Introduction to OSHA.ppt
Federal Register - New OSHA Silcia Dust Rule - March 2016
Federal Register - New OSHA Silcia Dust Rule - March 2016
Introduction to OSHA
Introduction to OSHA
Comparison of US and India Health and Safety Regulations
Comparison of US and India Health and Safety Regulations
OSHConstructionLecture_Legal Requirements .pdf
OSHConstructionLecture_Legal Requirements .pdf
Why Safeguard Industrial Machinery?
Why Safeguard Industrial Machinery?
Consensus Standards
Consensus Standards
Seminar Cakna KKP - Latest Update Osh Law
Seminar Cakna KKP - Latest Update Osh Law
Risk Assessment
Risk Assessment
LIVING WITH THE EARTHObjectives for this C.docx
LIVING WITH THE EARTHObjectives for this C.docx
Final_AAH1601_Patient Safety Fundamentals for Healthcare Architects (JK rev4 ...
Final_AAH1601_Patient Safety Fundamentals for Healthcare Architects (JK rev4 ...
Overview of Proposed Changes to OSHA 1910 General Industry Regulations
Overview of Proposed Changes to OSHA 1910 General Industry Regulations
Health and safety at work
Health and safety at work
osha ppt old.ppt
osha ppt old.ppt
Construction l2u201 worksheet_1_learner
Construction l2u201 worksheet_1_learner
Global Harmonization System by Safety Law
Global Harmonization System by Safety Law
Ansi.a14.2.1990
Ansi.a14.2.1990
Standards Regulations
Standards Regulations
OSHA Auditing: Federal Compliance: Construction: The Complete Health and Safe...
OSHA Auditing: Federal Compliance: Construction: The Complete Health and Safe...
Mais de WKCTC
Chapter 2
Chapter 2
WKCTC
Chapter 2
Chapter 2
WKCTC
Chapter 1
Chapter 1
WKCTC
Introduction to is 100 course
Introduction to is 100 course
WKCTC
Chapter 2
Chapter 2
WKCTC
Chapter 1
Chapter 1
WKCTC
Mais de WKCTC
(6)
Chapter 2
Chapter 2
Chapter 2
Chapter 2
Chapter 1
Chapter 1
Introduction to is 100 course
Introduction to is 100 course
Chapter 2
Chapter 2
Chapter 1
Chapter 1
Último
Importance of information and communication (ICT) in 21st century education. Challenges and issues related to ICT in education.
ICT role in 21st century education and it's challenges.
ICT role in 21st century education and it's challenges.
MaryamAhmad92
Mixin classes are helpful for developers to extend the models. Using these classes helps to modify fields, methods and other functionalities of models without directly changing the base models. This slide will show how to extend models using mixin classes in odoo 17.
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
Celine George
process recording format
PROCESS RECORDING FORMAT.docx
PROCESS RECORDING FORMAT.docx
PoojaSen20
Making communications land - Are they received and understood as intended? webinar Thursday 2 May 2024 A joint webinar created by the APM Enabling Change and APM People Interest Networks, this is the third of our three part series on Making Communications Land. presented by Ian Cribbes, Director, IMC&T Ltd @cribbesheet The link to the write up page and resources of this webinar: https://www.apm.org.uk/news/making-communications-land-are-they-received-and-understood-as-intended-webinar/ Content description: How do we ensure that what we have communicated was received and understood as we intended and how do we course correct if it has not.
Making communications land - Are they received and understood as intended? we...
Making communications land - Are they received and understood as intended? we...
Association for Project Management
Third Battle of Panipat
Third Battle of Panipat detailed notes.pptx
Third Battle of Panipat detailed notes.pptx
Amita Gupta
Spell
Spellings Wk 3 English CAPS CARES Please Practise
Spellings Wk 3 English CAPS CARES Please Practise
AnaAcapella
General introduction about Microwave assisted reactions.
microwave assisted reaction. General introduction
microwave assisted reaction. General introduction
Maksud Ahmed
Mehran University Newsletter is a Quarterly Publication from Public Relations Office
Mehran University Newsletter Vol-X, Issue-I, 2024
Mehran University Newsletter Vol-X, Issue-I, 2024
Mehran University of Engineering & Technology, Jamshoro
Skills of introducing the lesson presents by Mrs. Amanpreet Kaur, Assistant Professor Khalsa College of Education, G.T. Road Amritsar
SKILL OF INTRODUCING THE LESSON MICRO SKILLS.pptx
SKILL OF INTRODUCING THE LESSON MICRO SKILLS.pptx
Amanpreet Kaur
This Presentation is about the Unit 5 Mathematical Reasoning of UGC NET Paper 1 General Studies where we have included Types of Reasoning, Mathematical reasoning like number series, letter series etc. and mathematical aptitude like Fraction, Time and Distance, Average etc. with their solved questions and answers.
UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf
UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf
Nirmal Dwivedi
Students will get the knowledge of the following: - meaning of Pharmaceutical sales representative (PSR) - purpose of detailing, training & supervision - norms of customer calls - motivating, evaluating, compensation and future aspects of PSR
Unit-IV; Professional Sales Representative (PSR).pptx
Unit-IV; Professional Sales Representative (PSR).pptx
VishalSingh1417
SGLG2024
Seal of Good Local Governance (SGLG) 2024Final.pptx
Seal of Good Local Governance (SGLG) 2024Final.pptx
negromaestrong
Basic Civil Engineering notes first year Notes Building notes Selection of site for Building Layout of a Building What is Burjis, Mutam Building Bye laws Basic Concept of sunlight ventilation in building National Building Code of India Set back or building line Types of Buildings Floor Space Index (F.S.I) Institutional Vs Educational Building Components & function Sills, Lintels, Cantilever Doors, Windows and Ventilators Types of Foundation AND THEIR USES Plinth Area Shallow and Deep Foundation Super Built-up & carpet area Floor Area Ratio (F.A.R) RCC Reinforced Cement Concrete RCC VS PCC
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
Denish Jangid
Explore the world of IT certification with CompTIA. Discover how the CompTIA Security+ Book SY0-701 can elevate your cybersecurity expertise and open doors to new career opportunities. This PDF provides essential insights into the CompTIA Security+ certification, guiding you through exam preparation and showcasing the benefits of becoming CompTIA-certified. Download now to embark on your journey to IT excellence with CompTIA.
ComPTIA Overview | Comptia Security+ Book SY0-701
ComPTIA Overview | Comptia Security+ Book SY0-701
bronxfugly43
Students will get the knowledge of the following- meaning of the pricing, its importance, objectives, methods of pricing, factors affecting the price of products, An overview of DPCO (Drug Price Control Order) and NPPA (National Pharmaceutical Pricing Authority)
Unit-V; Pricing (Pharma Marketing Management).pptx
Unit-V; Pricing (Pharma Marketing Management).pptx
VishalSingh1417
In this webinar, members learned the ABCs of keeping books for a nonprofit organization. Some of the key takeaways were: - What is accounting and how does it work? - How do you read a financial statement? - What are the three things that nonprofits are required to track? -And more
Introduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The Basics
TechSoup
SOC 101 Final Powerpoint
SOC 101 Demonstration of Learning Presentation
SOC 101 Demonstration of Learning Presentation
camerronhm
The pricing and discounting feature is very essential for Odoo POS. Global discount is actually a discount that will apply to the entire order. And it indicates that the discount is applied to every item in the order, regardless of how much each item costs separately. This slide will show how to manage global discounts in odoo 17 POS.
How to Manage Global Discount in Odoo 17 POS
How to Manage Global Discount in Odoo 17 POS
Celine George
https://app.box.com/s/7hlvjxjalkrik7fb082xx3jk7xd7liz3
TỔNG ÔN TẬP THI VÀO LỚP 10 MÔN TIẾNG ANH NĂM HỌC 2023 - 2024 CÓ ĐÁP ÁN (NGỮ Â...
TỔNG ÔN TẬP THI VÀO LỚP 10 MÔN TIẾNG ANH NĂM HỌC 2023 - 2024 CÓ ĐÁP ÁN (NGỮ Â...
Nguyen Thanh Tu Collection
In this webinar, nonprofits learned how to delve into the minds of funders, unveiling what they truly seek in qualified grant applicants, and tools for success. Learn more about the Grant Readiness Review service by Remy Consulting at TechSoup to help you gather, organize, and assess the strength of documents required for grant applications.
Grant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy Consulting
TechSoup
Último
(20)
ICT role in 21st century education and it's challenges.
ICT role in 21st century education and it's challenges.
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
PROCESS RECORDING FORMAT.docx
PROCESS RECORDING FORMAT.docx
Making communications land - Are they received and understood as intended? we...
Making communications land - Are they received and understood as intended? we...
Third Battle of Panipat detailed notes.pptx
Third Battle of Panipat detailed notes.pptx
Spellings Wk 3 English CAPS CARES Please Practise
Spellings Wk 3 English CAPS CARES Please Practise
microwave assisted reaction. General introduction
microwave assisted reaction. General introduction
Mehran University Newsletter Vol-X, Issue-I, 2024
Mehran University Newsletter Vol-X, Issue-I, 2024
SKILL OF INTRODUCING THE LESSON MICRO SKILLS.pptx
SKILL OF INTRODUCING THE LESSON MICRO SKILLS.pptx
UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf
UGC NET Paper 1 Mathematical Reasoning & Aptitude.pdf
Unit-IV; Professional Sales Representative (PSR).pptx
Unit-IV; Professional Sales Representative (PSR).pptx
Seal of Good Local Governance (SGLG) 2024Final.pptx
Seal of Good Local Governance (SGLG) 2024Final.pptx
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
Basic Civil Engineering first year Notes- Chapter 4 Building.pptx
ComPTIA Overview | Comptia Security+ Book SY0-701
ComPTIA Overview | Comptia Security+ Book SY0-701
Unit-V; Pricing (Pharma Marketing Management).pptx
Unit-V; Pricing (Pharma Marketing Management).pptx
Introduction to Nonprofit Accounting: The Basics
Introduction to Nonprofit Accounting: The Basics
SOC 101 Demonstration of Learning Presentation
SOC 101 Demonstration of Learning Presentation
How to Manage Global Discount in Odoo 17 POS
How to Manage Global Discount in Odoo 17 POS
TỔNG ÔN TẬP THI VÀO LỚP 10 MÔN TIẾNG ANH NĂM HỌC 2023 - 2024 CÓ ĐÁP ÁN (NGỮ Â...
TỔNG ÔN TẬP THI VÀO LỚP 10 MÔN TIẾNG ANH NĂM HỌC 2023 - 2024 CÓ ĐÁP ÁN (NGỮ Â...
Grant Readiness 101 TechSoup and Remy Consulting
Grant Readiness 101 TechSoup and Remy Consulting
Introduction to safety & health osha
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
![[object Object],[object Object],[object Object],[object Object],The Need for Legislation](https://image.slidesharecdn.com/introductiontosafetyhealth-osha-100907161655-phpapp02/85/Introduction-to-safety-health-osha-1-320.jpg)
![The Need for Legislation ,[object Object],[object Object],[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)