What is lte ca carrier aggregation tutorial

11/24/2015 What is LTE CA | Carrier Aggregation | Tutorial : RadioElectronics.com
http://www.radioelectronics.com/info/cellulartelecomms/ltelongtermevolution/4glteadvancedcarrierchannelaggregation.php 1/11
(http://www.radio-electronics.com/)
LinkedIn (https://www.linkedin.com/company/radio-electronics-com)
YouTube (https://www.youtube.com/user/radioelectronicscom) Twitter (http://twitter.com/RadioElec)
News feed (/rss.php) Newsletter (/newsletter/)
Google+ (https://plus.google.com/102744187429709400446?prsrc=3)
Search
CELLULAR / MOBILE TELECOMMUNICATIONS (HTTP://WWW.RADIO-
ELECTRONICS.COM/INFO/CELLULARTELECOMMS/)
LTE Advanced Tutorial (3gpp-4g-imt-lte-advanced-tutorial.php)
Carrier Aggregation (4g-lte-advanced-carrier-channel-aggregation.php)
Coordinated Multipoint - CoMP (4g-lte-advanced-comp-coordinated-multipoint.php)
LTE Relay (4g-lte-advanced-relaying.php) LTE D2D (4g-lte-advanced-d2d-device-to-device.php)
LTE HetNet (4g-lte-advanced-heterogeneous-networks-hetnet.php)
3G LTE (3g-lte-basics.php)
LTE CA: Carrier Aggregation Tutorial
- 4G LTE Advanced CA, carrier aggregation or channel aggregation enables multiple LTE
carriers to be used together to provide the high data rates required for 4G LTE
Advanced.
4G LTE ADVANCED INCLUDES:
See also
LTE Advanced offers considerably higher data rates than even the initial releases of LTE. While the spectrum
usage efficiency has been improved, this alone cannot provide the required data rates that are being headlined
for 4G LTE Advanced.

To achieve these very high data rates it is necessary to increase the transmission bandwidths over those that can
be supported by a single carrier or channel. The method being proposed is termed carrier aggregation, CA, or
sometimes channel aggregation. Using LTE Advanced carrier aggregation, it is possible to utilise more than one
carrier and in this way increase the overall transmission bandwidth.
These channels or carriers may be in contiguous elements of the spectrum, or they may be in different bands.
Spectrum availability is a key issue for 4G LTE. In many areas only small bands are available, often as small as 10
MHz. As a result carrier aggregation over more than one band is contained within the specification, although it
does present some technical challenges.
Carrier aggregation is supported by both formats of LTE, namely the FDD and TDD variants. This ensures that
both FDD LTE and TDD LTE are able to meet the high data throughput requirements placed upon them.
LTE carrier aggregation basics
The target figures for data throughput in the downlink is 1 Gbps for 4G LTE Advanced. Even with the
improvements in spectral efficiency it is not possible to provide the required headline data throughput rates
within the maximum 20 MHz channel. The only way to achieve the higher data rates is to increase the overall
bandwidth used. IMT Advanced sets the upper limit at 100 MHz, but with an expectation of 40 MHz being used
for minimum performance. For the future it is possible the top limit of 100 MHz could be extended.
It is well understood that spectrum is a valuable commodity, and it takes time to re-assign it from one use to
another in view - the cost of forcing users to move is huge as new equipment needs to be bought. Accordingly as
sections of the spectrum fall out of use, they can be re-assigned. This leads to significant levels of fragmentation.
To an LTE terminal, each component carrier appears as an LTE carrier, while an LTE-Advanced terminal can
exploit the total aggregated bandwidth.
RF aspects of carrier aggregation
There are a number of ways in which LTE carriers can be aggregated:
Types of LTE carrier aggregation
Intra-band: This form of carrier aggregation uses a single band. There are two main formats for this type

of carrier aggregation:
Contiguous: The Intra-band contiguous carrier aggregation is the easiest form of LTE carrier
aggregation to implement. Here the carriers are adjacent to each other.
Contiguous aggregation of two uplink component carriers
The aggregated channel can be considered by the terminal as a single enlarged channel from the RF
viewpoint. In this instance, only one transceiver is required within the terminal or UE, whereas more
are required where the channels are not adjacent. However as the RF bandwidth increases it is
necessary to ensure that the UE in particular is able to operate over such a wide bandwidth without
a reduction in performance. Although the performance requirements are the same for the base
station, the space, power consumption, and cost requirements are considerably less stringent,
allowing greater flexibility in the design. Additionally for the base station, multi-carrier operation,
even if non-aggregated, is already a requirement in many instances, requiring little or no change to
the RF elements of the design. Software upgrades would naturally be required to cater for the
additional capability.
Non-contiguous: Non-contiguous intra-band carrier aggregation is somewhat more complicated
than the instance where adjacent carriers are used. No longer can the multi-carrier signal be treated
as a single signal and therefore two transceivers are required. This adds significant complexity,
particularly to the UE where space, power and cost are prime considerations.
Inter-band non-contiguous: This form of carrier aggregation uses different bands. It will be of particular
use because of the fragmentation of bands - some of which are only 10 MHz wide. For the UE it requires
the use of multiple transceivers within the single item, with the usual impact on cost, performance and
power. In addition to this there are also additional complexities resulting from the requirements to reduce
intermodulation and cross modulation from the two transceivers
The current standards allow for up to five 20 MHz carriers to be aggregated, although in practice two or three is
likely to be the practical limit. These aggregated carriers can be transmitted in parallel to or from the same
terminal, thereby enabling a much higher throughput to be obtained.
Carrier aggregation bandwidths

When aggregating carriers for an LTE signal, there are several definitions required for the bandwidth of the
combined channels. As there as several bandwidths that need to be described, it is necessary to define them to
reduce confusion.
LTE Carrier Aggregation Bandwidth Definitions for Intra-Band Case
LTE carrier aggregation bandwidth classes
There is a total of six different carrier aggregation, CA bandwidth classes which are being defined.
CARRIER AGGREGATION
BANDWIDTH CLASS
AGGREGATED TRANSMISSION
BW CONFIGURATION
NUMBER OF COMPONENT CARRIERS
A ≤100 1
B ≤100 2
C 100 - 200 2
NB: classes D, E, & F are in the study phase.
LTE aggregated carriers
When carriers are aggregated, each carrier is referred to as a component carrier. There are two categories:
Primary component carrier: This is the main carrier in any group. There will be a primary downlink
carrier and an associated uplink primary component carrier.
Secondary component carrier: There may be one or more secondary component carriers.
There is no definition of which carrier should be used as a primary component carrier - different terminals may
use different carriers. The configuration of the primary component carrier is terminal specific and will be
determined according to the loading on the various carriers as well as other relevant parameters.

27Share Tweet 9 92
3G LTE (/info/cellulartelecomms/lte-long-term-evolution/3g-lte-basics.php)
LTE Advanced (/info/cellulartelecomms/lte-long-term-evolution/3gpp-4g-imt-lte-advanced-tutorial.php)
In addition to this the association between the downlink primary carrier and the corresponding uplink primary
component carrier is cell specific. Again there are no definitions of how this must be organised. The information
is signalled to the terminal of user equipment as part of the overall signalling between the terminal and the base
station.
Carrier aggregation cross carrier scheduling
When LTE carrier aggregation is used, it is necessary to be able to schedule the data across the carriers and to
inform the terminal of the DCI rates for the different component carriers. This information may be implicit, or it
may be explicit dependent upon whether cross carrier scheduling is used.
Enabling of the cross carrier scheduling is achieved individually via the RRC signalling on a per component carrier
basis or a per terminal basis.
When no cross carrier scheduling is arranged, the downlink scheduling assignments achieved on a per carrier
basis, i.e. they are valid for the component carrier on which they were transmitted.
For the uplink, an association is created between one downlink component carrier and an uplink component
carrier. In this way when uplink grants are sent the terminal or UE will know to which uplink component carrier
they apply.
Where cross carrier scheduling is active, the PDSCH on the downlink or the PUSCH on the uplink is transmitted
on an associate component carrier other than the PDCCH, the carrier indicator in the PDCCH provides the
information about the component carrier used for the PDSCH or PUSCH.
It is necessary to be able to indicate to which component carrier in any aggregation scheme a grant relates. To
facilitate this, component carriers are numbered. The primary component carrier is numbered zero, for all
instances, and the different secondary component carriers are assigned a unique number through the UE specific
RRC signalling. This means that even if the terminal or user equipment and the base station, eNodeB may have
different understandings of the component carrier numbering during reconfiguration, transmissions on the
primary component carrier can be scheduled.
By Ian Poole (https://plus.google.com/104687638164370436625?rel=author)
<< Previous (3gpp-4g-imt-lte-advanced-tutorial.php) | Next >> (4g-lte-advanced-comp-coordinated-
multipoint.php)
Share this page
Want more like this? Register for our newsletter (/newsletter/)
MORE CELLULAR TELECOMMUNICATIONS TUTORIALS
20Share

UMTS / W-CDMA (/info/cellulartelecomms/umts/umts_wcdma_tutorial.php)
GSM (/info/cellulartelecomms/gsm_technical/gsm_introduction.php)
3G HSPA (/info/cellulartelecomms/3g-hspa/umts-high-speed-packet-access-tutorial.php)
CDMA2000 (/info/cellulartelecomms/3gpp2/cdma2000-1xrtt-basics-tutorial.php)
GPRS (/info/cellulartelecomms/gprs/gprs_tutorial.php)
EDGE (/info/cellulartelecomms/gsm-edge/basics-tutorial-technology.php)
Femtocells (/info/cellulartelecomms/femtocells/femto-cells-tutorial-basics.php)
5G ideas (/info/cellulartelecomms/5g-mobile-cellular/technology-basics.php)
HetNets (/info/cellulartelecomms/heterogeneous-networks-hetnet/basics-tutorial.php)
SON (/info/cellulartelecomms/self-organising-networks-son/basics-tutorial.php)
Backhaul (/info/cellulartelecomms/cellular-mobile-backhaul/basics-tutorial.php)
VoLTE (/info/cellulartelecomms/lte-long-term-evolution/voice-over-lte-volte.php)
Basic concepts (/info/cellulartelecomms/cellular_concepts/mobile-basics-concepts.php)
Latest news

UK bookstore (/bookstore/bookshop-
uk.php)
Farnell element14 stocking Fluke 1736
three-phase power loggers
(/news/distribution-supply/farnell-
element14-stocking-fluke-1736-three-
phase-6595)
Hager aims for ‘easiest to install’
consumer units with new cable clamp
(/news/electronics-components/hager-
aims-for-easiest-to-install-6592)
SAP and GENBAND sign global reseller
agreement on Kandy (/news/distribution-
supply/sap-and-genband-sign-global-
reseller-6591)
60A digital point-of-load DC/DC converter
delivers power density & scalability
(/news/power-management/60a-digital-
point-of-load-dcdc-converter-delivers-
6594)
Programmable PMIC enables power
system reuse for multiple protocols
(/news/power-
management/programmable-pmic-
enables-power-system-reuse-6590)
. . . . More News (http://www.radio-
electronics.com/news.php)
FEATURED BOOK (/BOOKSTORE/FEATURED-
BOOK.PHP)
Introduction to
Communication Networks
Tarmo Anttalainen, Ville
Jääskeläinen
There has been an explosive
growth in telecommunications
networks, both wired...
Read more . . (/bookstore/featured-
book.php)
USA bookstore (/bookstore/bookshop-
usa.php)
(/bookstore/ebooks-list.php)

Online - Transmission
Lines, S-Parameters &
Smith Chart
(/learning-training-
courses/courses_item.php?
id=radio-
engineering/online---
transmission-lines-s-
parameters-93)
Understand these essential
concepts without complex
mathematics
More training courses
(/learning-training-
courses/)
Designing for Li-ion
Batteries in Motor
Applications
(http://www.radio-
electronics.com/whitepapers/designing-
for-li-ion-batteries-in-
motor-15)
Discover all the design
considerations for
integrating brushless DC
motors with Li-ion batteries
in 3-phase motor
applications in this
whitepaper from Intersil.
More whitepapers
(/whitepapers.php)
TRAINING COURSES (/LEARNING-TRAINING-
COURSES/)
(/bookstore/)
RECOMMENDED WHITEPAPER
(/WHITEPAPERS.PHP)
Forthcoming Events
PMRExpo (/event/pmrexpo-50)
ISP 2015: 2nd International Conference

on Intelligent Signal Processing
(/event/isp-2015-2nd-international-
conference-on-46)
Consumer Electronics Show, CES
(/event/consumer-electronics-show-ces-
25)
Short Course on Travelling Wave Tubes
(/event/short-course-on-travelling-wave-
tubes-59)
Mobile World Congress (/event/mobile-
world-congress-8)
CeBit 2015 (/event/cebit-2015-22)
. . . . More Events (http://www.radio-
electronics.com/events-exhibitions-
trade-shows/)
Popular Articles
Heterogeneous 3D System-in-Package
Integration (/articles/processing-
embedded/heterogeneous-3d-system-in-
package-integration-166)
SoC development: do we really
understand what is going on?
(/articles/circuit-design/soc-development-
do-we-really-understand-165)
Electronic Components Market to Grow in
2015 (/articles/distribution-
supply/electronic-components-market-to-
grow-in-133)
PCB Design for EMC (/articles/circuit-
design/pcb-design-for-emc-98)
Practical PCB Design using DesignSpark
PCB (/articles/circuit-design/practical-pcb-
design-using-designspark-pcb-143)
. . . . More Articles (http://www.radio-
electronics.com/articles.php)

THE WEBSITE
About us (/rec-information/about-us.php)
Privacy Policy (/rec-information/privacy-policy.php)
Submit news / articles (/rec-information/article-submission.php)
Advertise with us (/rec-information/advertising.php)
SECTIONS
News (/news.php)
Articles (/articles.php)
Training (/learning-training-courses/)
Jobs (/electronics-software-jobs/)
Events (/events-exhibitions-trade-shows/)
Bookshop (/bookstore/)
Equipment store (/test-equipment-shop/)
Whitepapers (/whitepapers.php)
CHANNELS
Antennas & propagation (/info/antennas/)
Cellular telecoms (/info/cellulartelecomms/)
Circuit design (/info/circuits/)
Components (/info/data/)
Power management (/info/power-management/)
RF technology (/info/rf-technology-design/)
Test (/info/t_and_m/)
Wireless (/info/wireless/)

Broadcast technology (/info/broadcast/)
Embedded (/info/processing-embedded/)
Design principles (/info/electronics-design/)
Distribution (/info/distribution-supply/)
Formulae (/info/formulae/)
Manufacture (/info/manufacture/)
Satellites (/info/satellite/)
Telecoms & networks (/info/telecommunications_networks/)
History (/info/radio_history/)
Radio-Electronics.com is operated and owned by Adrio Communications Ltd and edited by Ian Poole. All information is © Adrio
Communications Ltd and may not be copied except for individual personal use. This includes copying material in whatever form into
website pages. While every effort is made to ensure the accuracy of the information on Radio-Electronics.com, no liability is accepted
for any consequences of using it. This site uses cookies. By using this site, these terms including the use of cookies are accepted. More
explanation can be found in our Privacy Policy

What is lte ca carrier aggregation tutorial

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Destaque

Destaque (14)

Semelhante a What is lte ca carrier aggregation tutorial

Semelhante a What is lte ca carrier aggregation tutorial (20)

Último

Último (20)

What is lte ca carrier aggregation tutorial