The document describes Supermix's cement and fly ash feeding system for concrete batching plants. The system efficiently transfers cement and fly ash from bulkers or hoppers into storage silos using screw pumps and blowers. It has two options - directly conveying material from a 30-ton bulker or manually dumping into a feed hopper. The system provides contamination-free transfer to help construction projects meet cost and timeline targets.
2.
INTRODUCTION
SUPERMIX offers CEMENT & FLY ASH FEEDING SYSTEM with its effective and efficient
outstanding innovation.
Infrastructure development is on its boom and given top priority in construction industry as this
particular section is witnessed with very high growth. Time bound mega projects with high
massive cost have their strict time frames for execution.
Concrete Batching plant, in close vicinity of any RMC / mega project site is a vital facility. The
transfer of cement / fly ash to the main silo determines the productivity and efficiency of these
batching plants.
This transfer is achieved through Cement & Fly Ash Feeding System SSP‐I / SSP‐II designed,
manufactured and serviced by SUPERMIX equipments.
It is the system to help in achieving set target in cost and time. The system consists of two‐in‐
built options:
i) Through, conveying material directly from the special bulker of 30 ton (which has
integrated piping) to the silo.
ii) Through, manual dumping of material into the feed hopper and pumped through screw /
RAV to a material reservoir, where the material is fluidized and conveyed to the silo.
DESCRIPTION
It is the most versatile and speedy method of transferring bulk material from one point to
another within a defined area.
APPLICATIONS
The SUPERMIX Screw Pumps are heavy‐duty, screw‐type
pneumatic pumps. These pump systems are most commonly
used to convey dry, free‐flowing, pulverized materials from
grinding mills, transfer materials from silo to silo, transfer dust
from collectors, and load and unload railcars, ships and
barges. The materials are conveyed literally anywhere a
pipeline can be run and to any number of delivery points.
GENERAL SPECIFICATIONS
SUPERMIX Screw Pumps are constructed of mild and structural steel, and
mounted on a base. SE pumps are equipped with pedestal blocks that support
a pump screw which helps to provide a smooth, balanced operation. The screw
is dynamically balanced and areas of this screw, along with other parts of the
pump in direct contact with the material to be conveyed, are made of
hardened, wear‐resistant material and special hard surfacing where required.
The screw is directly coupled to the driving motor but can be v‐belt driven.
3. Standard equipment on SE pumps includes a pressurized seal
and bearing assembly that extends the service life of the
discharge seals by preventing the material being handled from
entering the bearing area. Each pump system includes the
pump, drive motor and compressed air source.
OPERATION
The materials to be conveyed enter the hopper by gravity or
dumped by any means. The material is compacted as it is
advanced. Its density is further increased in the space
between the terminal flight of the screw and the face of the
non‐return valve to form a seal against the transport line
pressure, thus preventing blowback. The material then
enters the discharge body, is fluidized by compressed air, and
is conveyed into the transport line.
TECHNICAL SPECIFICATIONS
SR. ITEM DESCRIPTION SPECIFICATION
01 MODEL SSP‐I SSP‐II
02 OUTPUT CAPACITY* 12‐15 TON/HR 22‐25 TON/HR
03 FEED HOPPER CAPACITY 250 Kg 250 Kg
04 SCREW TOUGHEND TOUGHEND
05 SCREW MOTOR 22.5 kW / 30 HP 22.5 kW / 30 HP
06 TWIN LOBE AIR BLOWER SE‐19 SE‐22
07 BLOWER MOTOR 30 kW / 40 HP 37.5 kW / 50 HP
08 STRUTURE FIXED FIXED
09 POWER SUPPLY 415 V AC ± 10%, 3 PHASE, 50 HZ ± 5%
4.
FOLLOWING ACCESSORIES INCLUDED
Suction Silencer Non Return Valve
Discharge Silencer V‐Belt Set
Spring Loaded safety Valve V‐ Belt Guard
Pressure gauge Drive Pulley
Suction Filter Driven Pulley
SALIENT FEATURES
Closed System
Ensures contamination free transfer for material
No Spillage or wastage involved
Minimum Maintenance
Speedy & User friendly designs
Works;
Plot No. 291/2, Panchratna Estate, Opp. Span Engineers,
B/s. Ramol Over bridge, Nr. Ramol Cross Roads, Phase IV,
GIDC Vatva, Ahmedabad – 382445, Gujarat (INDIA)
Ph.: +91‐79‐65132440, e‐mail: info@supermixequipments.com, supermixequipments@yahoo.com,
Website: www.supermix.co.in, www.indiamart.com/supermixequipments