Hope-Wish TTVC series thermal imaging camera specially design for forest fire prevention ,detection and alarm,integrates perimeter surveillance, long-range area observation, and fire detection analytics in a single PTZ camera. The system provides a reliable response to major safety risks by enabling the user to continuously monitor target sites in the range of a few kilometers from the mounting point. http://hpthermalcamera.com export@chinahpws.com 0086 18615311386

1. Fire Alarm Thermal Camera
http://hpthermalcamera.com
export@chinahpws.com
Hope-Wish Technologies Inc.

2. 01OPTION
02OPTION
03OPTION
04OPTION
Introduction
Front-end
equipment
Platform
Software
Funtion
Content

3. 01. Introduction
Early Detection Can Be More Important Than
Prevention.Unfortunately, most wildfires aren’t easily
preventable,To significantly mitigate the risk from and
cost of wildfires, they must be detected and suppressed
prior to reaching an uncontrolled state.
Hope-Wish TTVC series thermal imaging camera
specially design for forest fire prevention ,detection and
alarm,integrates perimeter surveillance, long-range area
observation, and fire detection analytics in a single PTZ
camera. The system provides a reliable response to
major safety risks by enabling the user to continuously
monitor target sites in the range of a few kilometers
from the mounting point.

5. 02. Front-end detection
equipment
the latest 5th uncooled
infrared technology and
continuously infrared
optical zoom technology
With 336*256 /640*512
uncooled FPA sensor
360°degree PT
6000m detect range
IP66 ingress protection
intelligent analysis module,
hot spot detection
algorithm,automatically detect
the flame, vehicles, personnel
and other heat sources
01OPTION
02OPTION
03OPTION
04OPTION

6. 03. Platform & Software
F R 2 0 0 0 f i r e w a r n i n g
platform software, can
realize the video display,
control, storage, playback,
scanning and automatic
control, automatic alarm
information processing,
automatic alarm record,
calculate calibration point
position, virtual police
district management.

7. Alarming Mode
Two ways alarm: video superposition alarm + data returned (or switch).All alarm parameters and instructions can be through the
remote video OSD menu Settings, In addition to FR2000 fire prevention software, can also use the general platform software, can be
used with any video encoder.With functions of angle data back, cooperate with the background software, can be real-time GIS map
point precise positioning.

8. electronic map and fire
point position display
The electronic map has the functions of
zooming, ranging, positioning, printing, and
data exchange with front-end equipment. The
electronic map can receive the GPS position of
the front-end equipment, the video stream
data and the angle and azimuth information
of the PTZ, Display the location of the front-
end equipment and real-time radar scan area,
also can be selected front-end equipment,
real-time video images suspended on the
map display

9. 360° Panorama
To the camera as the center for 360o full range of scanning, splicing out of a real panorama picture, more intuitive than the electronic
map, at the same time, the current camera viewing range will be displayed in red square on the panorama, in addition, the virtual
police area Will be blue polygon block diagram displayed on the panorama, to facilitate the user to determine the virtual alarm area
of the shield.

10. System and log management
System management functions, you can add to the front-end equipment to delete, name editing, encoding device-related
parameter settings, the user to delete delete management, system parameter settings, as well as detection wizard function to help
users are not familiar with step by step set scan detection.

11. Funtion
Scan
Detect
Alarm
Locate
Intelligent
detection
Precise Location
Automatic scan
Auto Alarm

12. Application

13. http://hpthermalcamera.com
export@chinahpws.com
Thanks for your time