ESD access control system is an integrated system integrating access control management system, monitoring system, ESD test system, voice prompt system, etc, which is carefully designed and manufactured on the basis of many years access control technology research and demand analysis, combined with UHF card reading technology, network digital technology, remote alarm technology, computer network software technology, and pedestrian access control technology. The ESD access control system meets the security requirements of safety production.
ESD access control system is mainly composed of computer, intelligent card reading part, intelligent pedestrian turnstile gate, electrostatic test, smart card, display screen, and management software. RS485 or TCP / IP network communication is adopted between the computer and the turnstile gate, which can operate both online and offline. The equipment organically integrates machinery, electronics, microprocessor control, and various reading and writing technologies.
https://mairsturnstile.com/esd-access-control-system-solution.html
2. 9. Main functions of the system
10. ESD access control system mode
12. Operating steps for system use
3. General requirements for system design
4. System design principles
5. System design basis
1. What is ESD turnstile access control system?
2. Where to buy ESD access control system?
6. Application site of system
7. System characteristics
8. System structure and composition
11. Why need ESD access control system
13. Features of management software
3. What is ESD access control system?
ESD access control system is an integrated system
integrating access control management system, monitoring
system, ESD test system, voice prompt system, etc, which
is carefully designed and manufactured on the basis of
many years access control technology research and
demand analysis, combined with UHF card reading
technology, network digital technology, remote alarm
technology, computer network software technology, and
pedestrian access control technology. The ESD access
control system meets the security requirements of safety
production. It is an advanced integrated system combining
electrostatic tests, electronic pedestrian access control
equipment (tripod turnstile gate, swing turnstile gate, flap
barrier gate, sliding turnstile, etc.), and computerized
management software.
4. ESD access control system is mainly composed of computer, intelligent card reading part, intelligent
pedestrian turnstile gate, electrostatic test, smart card, display screen, and management software.
RS485 or TCP / IP network communication is adopted between the computer and the turnstile gate,
which can operate both online and offline. The equipment organically integrates machinery, electronics,
microprocessor control, and various reading and writing technologies.
https://mairsturnstile.com/esd-access-control-system-solution.html
By configuring different reading and writing equipment, adopting reliable safety protection devices,
real-time alarm systems, and direction indication interface, combined with a reliable human body
comprehensive tester, we can jointly coordinate and realize the intelligent control and management of
the passage. It is widely used in MT production line control area, semiconductor industry dust-free
room, high-tech R & D room, pharmaceutical factory static control area, hospital control area,
biochemical industry static control area, and other places requiring anti-static test and protection.
With the progress of science and technology, the information industry, as a symbol of the 21st century,
is strongly impacting and changing people’s thinking and the composition of society. A wave of
innovation has swept the whole construction industry and began to popularize the concept of
intelligence. Modern buildings have begun to use advanced technologies such as information and
network to improve the management level. The safe, comfortable and convenient environment brought
by intelligent technology has become the ideal goal pursued by people.
5. At the same time, the concept of safe production has been deeply rooted in the hearts of the people,
and people’s requirements for safe production are becoming higher and higher. People have higher
and higher requirements for ESD, so MairsTurnstile has launched a new ESD access control system
with a true resistance display to help enterprises understand and protect against static electricity and
improve the success rate of products. We can provide all the hardware supporting facilities and
software of this ESD access control system. If you need such an ESD access control system, please
don’t hesitate to contact us.
Due to the limitation of the construction environment, the imperfect safety management of equipment
and materials, and the weak self-protection awareness of some employees, it provides an opportunity
for employees. In order to further improve factory safety management, monitoring technology can be
introduced into the construction site, which has become the first choice of many factory units.
Considering various factors, wireless video monitoring technology is widely used by many construction
engineering companies due to its advantages of high flexibility, strong expansibility, and simple
maintenance. Provide more powerful technical guarantees for enterprise safety prevention and
efficient management.
When designing this ESD access control system, we fully consider protecting the product quality as
much as possible through this system.
6.
7. Where to buy this ESD access control
system? If you want to buy this ESD
access control system, please contact us,
directly click the online chat button on the
lower-left corner or scan the QR code on
the right to add my what’s app. Our sales
experts will provide you with the perfect
ESD access control system solution. Mairs
provide the whole system, including all
accessories hardware products, and
software, for example, card readers, anti-
static testers, two-foot test pedal, single
and double circuit sockets, pedestrian
ESD turnstile gate, Linux motherboard, 8-
inch LCD display, backstage management
software circuit socket, etc. If you need
details of all these accessories, please
contact our staff for details.
You also can check: ESD turnstile and
ESD turnstile gate system
Where to buy ESD access control system?
8. 1. Provide modern production management
methods
2. Through the omnidirectional monitoring of
the electrostatic test area, managers and
managers can easily understand and master
the use of the turnstile gate and the
operation of the equipment at each position,
find problems and solve them in time, which
can effectively improve the work efficiency of
managers. It is a necessary measure to
improve the management level.
General requirements for system design
9. 1. Employees only need to verify the face recognition and test the wrist band, MT-a10 instrument to judge the
displayed resistance value. If the resistance value is within the OK range, the turnstile gate will open
automatically.
2. Employees only need to verify face recognition and test electrostatic shoes. MT-a10 instrument judges and
displays the resistance value of the left and right feet. If the resistance value is within the OK range, the gate will
open automatically.
3. Employees verify face recognition and test electrostatic shoes and wrist straps. Mt-a10 instrument displays the
resistance value of shoes. If the resistance value is within the OK range, the gate will open automatically.
4. To enter the workshop for viewing, customers and VIPs only need to pass face recognition in front of the
turnstile machine, and the turnstile gate will open automatically.
5. To enter the workshop, the boss or manager only needs to recognize the face in front of the turnstile machine,
and the turnstile gate can be opened automatically.
6. You can choose to equip with fingerprint recognition, face recognition, or RFID card reader, and then test.
10. Principle of stability and reliability
The stability and reliability of the system is an important
strategy to protect users’ investment and establish a
good image of the product brand. The system selects
the advanced pedestrian turnstile gate in the industry,
and strictly implements the relevant international or
industrial standards in the aspects of system design,
equipment selection, commissioning, and installation.
The system has good stability and reliability.
With its miniaturization and lightweight design, the
hardware makes the system achieve a high degree of
integration. The software design has been widely used
and tested, has good compatibility, and can meet the
requirements of stability and high reliability.
System design principles
11. Expansibility principle
When designing the system, fully consider the expandability of the
function and scale of the system in the design life cycle, so as to
lay a foundation for future development and reduce future costs.
The principle of combining advanced and practical nature
The design of the system will adopt the latest products and the
most advanced technology, and show the various functions that
the users require. It not only keeps the advanced technology, but
also ensures the resource allocation is not wasted.
Economic principle
On the basis of ensuring the stability and reliability of the system,
considering the advanced nature of the system, we should select
systems and equipment as needed, so as to achieve a reasonable,
practical, and cost reduction. According to the characteristics of the
market, we have formulated practical market strategies to meet the
high-performance and low-cost requirements of high-end users in
the market.
12. Manageability
Multimedia monitoring is adopted, with
a friendly interface, convenient and
accurate provision of rich information to
help and prompt operators to operate,
which is easy to learn and use; The
operation of the system is simple and
fast, so as to ensure that operators at
different cultural levels and relevant
leaders can skillfully use the operating
system.
Maintainability
Highly integrated system equipment
selection and modular structure, simple
and lively user operation interface, and
the working mode of independent
operation and networked operation can
make it very convenient for users to
maintain the system without the help of
other tools.
13. Made according to GJB 3007-97, SJ / T 10694-2006, and ANSI ESD S20 standard. It is a device that can easily
and quickly test the wearing of the wrist strap, foot ring, conductive shoes, or anti-static shoes. The practical
measurement range is 50KΩ~1000MΩ, and the full range accuracy is less than ± 10%. The operation of the
tester is very simple. The green value indicates that it is normal, the Yellow value indicates that it is close to the
limit value, and the red value indicates that the test is unqualified (see the test instructions for the specific use
method). The user can set relevant parameters according to the test needs.
1. The test resistance value complies with international standards, and the gear standard can be set. Can test
single and double wrist strap.
2. It is a touch test, not a key or button type, to avoid poor contact or durability.
3. The foot pedal of the tester shall distinguish the left and right feet to comply with international specifications. It
can’t be just a piece of the metal pedal for both feet to test
For more information about ESD turnstile access control system, please check Mairs Turnstile website:
https://mairsturnstile.com/esd-access-control-system-solution.html
System design basis
14. 4. The signal connecting wire between the
electrostatic tester and the control system is
pluggable, which is convenient for disassembly and
assembly when the electrostatic tester is sent for
inspection.
5. The tester is divided into stand-alone mode and
networking mode, which can be tested separately
or connected to the mt-mj10 motherboard to start
the tester for testing and recording data. It can also
test the wearing of the wrist strap, foot ring,
conductive shoes, and anti-static shoes at the same
time or by grade, so as to save test time.
6. When connected to the Internet, the tester can
be started by swiping the card. When the card is
not swiped, the tester displays “idle”, and after
swiping the card, it displays “please test”, which can
display Chinese simplified, traditional, or English.
15. 7. It has the function of reminding the tester of the near failure of the test
results. When the test results are lower than the lower limit or higher than the
upper limit, the tester screen will use red to display the measured resistance
value. When the test result is between the near upper and lower limits and the
high and low standards (adjacent to the standards but not higher than the
high standard or lower than the low standard), the measured resistance value
will be displayed in yellow (although reminded at this time, it is still qualified).
When the test result is within the upper and lower limits, the measured
resistance value will be displayed in green.
8. When the voice function is installed and turned on, if the test is unqualified
or all of them are qualified, a live voice broadcast will remind you.
9. It can be equipped with 8 LCD, and the manager can use the mouse to
operate or the computer to remotely set the ESD resistance standard. The set
resistance value standard can be displayed on the LCD screen of the tester,
which is convenient for users to know the current resistance value standard.
The set resistance value will be displayed in the small square of the LCD
screen, and the manager can clearly know the current set resistance value
(purple font is the low-end resistance value standard, and blue font is the
high-end resistance value standard).
16. 10. The test speed is fast. The single machine can display the results within 1 second, display the digital
resistance value and distinguish the colors (red exceeds the standard and green is qualified).
11. The wrist strap jack is reserved twice as much as the general single hole tester and has single and double
wire wrist strap holes, which can be displayed separately on the LCD screen.
12. Stainless steel shell, the test button is touch-typed, non-general button spring type, durable, high-end, and
high-grade.
Application site of system
ESD access control system is widely used in SMT production line control area, semiconductor industry dust-free
room, high-tech R & D room, national defense and military electrostatic control area, explosive disposal area,
aerospace maintenance and calibration area, pharmaceutical factory electrostatic control area, hospital control
area, biochemical industry electrostatic control area, semiconductor production line, semiconductor assembly
production line, chip, microprocessor, hard disk, driver, composite material Circuit board production line,
precision instrument, optical product, aviation industry, optical instrument, electronic production and packaging,
chemical industry, optical lens, biomedicine, precision instrument, beverage and food, PCB Printing, packaging
and spraying… All kinds of occasions require anti-static tests and protection.
17. 1. Automatic identification of RF-ID card and IC card/fingerprint identification/face recognition
The system uses RF technology to swipe the card to identify personnel information, access the database information,
and synchronize in real-time, and multiple people can pass at the same time, which can also be identified quickly. If
they are not registered in the system, they can also be identified and prompted.
2. ESD test
The anti-static test instrument can quickly judge the resistance value of testers, and conduct combined tests such as
electrostatic ring, left foot electrostatic shoes, right foot electrostatic shoes, etc.
Each passage can be accessed, which greatly improves the utilization rate of the equipment. When personnel
passes through, the system can automatically identify the access direction.
3. Real-time upload of card swiping information
The system uploads the information of personnel swiping in and out of the factory site and the qualified test data to
the management command center in real-time through TCP / IP network, or automatically sends the test data to the
management personnel computer designated by each team by e-mail.
System characteristics
18. 4. Multimedia display screen linkage monitoring function
A large display screen shall be installed on the site of the entrance and exit, and the information of
unqualified personnel in the test department shall be displayed on it and marked in red for leaders
and customers to watch and verify at any time.
5. Alarm function
For personnel without cards or illegal cards, the turnstile gate will immediately send out audible and
visual alarms when passing through the passage. For example, during the commuting period, illegal
personnel and people who are not on this floor will follow in, and the turnstile gate system can
automatically identify and effectively prevent outsiders from entering, so as to truly combine civil air
defense with technical defense and make up for management loopholes.
19. ESD access control system is composed of an
RF card reader (optional ID / IC), pedestrian
turnstile gate, mt-a10 tester, Linux
motherboard, 8-inch display, two-foot test
pedal, single and double circuit socket, and
platform management software.
1. Card reader
Collect personnel card information, card
reader, and card information within 5cm-10cm;
You need to swipe your card actively.
System structure and
composition
20. 2. Pedestrian turnstile gate
When personnel quickly pass through the turnstile gate, they quickly and accurately screen illegal
identities and output alarm signals after judging illegal persons, which reflects the organic
combination of safety management and humanized management.
3. ESD tester
The core components of the system are the identification of electrostatic ring and electrostatic
shoes, the hardware core algorithm, the function of control, identification, alarm, and uploading to
the management server through the network.
ESD test instrument is one of the RS485 access control series, which uses standard industrial
isolation RS485 communication, and the number of equipment in a management system is not
limited; It can be externally connected with two Wigan card readers to realize card swiping in and
out of one entrance. It has the characteristics of stable performance, fast communication, large
capacity, strong compatibility, and convenient networking.
21. ESD tester performance parameters
• Working voltage: input dc9v1a
• External dimension: 115mm * 175mm * 28.5mm
• Working hours: Unlimited
• Operating environment: humidity: 0% ~ 90%, temperature: – 20C ° ~ 60C °
• Display screen: 3.5-inch resistance touch screen
• Instrument interface: with single and double circuits
• Release static electricity: it has the function of releasing static electricity from the human body
• Temperature and humidity: capacitive humidity sensing is more accurate
• It can be operated by a single machine and tested to open the gate. It can also choose network card swiping +
test to open the gate. There is no test record for a single machine.
22. • Input interface: Standard Wigan card reader 34 / 26 (RS232 input mode can be customized)
• Output interface: RS485 communication
• Working status: the LCD screen in the test status displays the resistance value of the wrist strap
and electrostatic shoes
• Factory default resistance range:
• Wrist strap: 750k Ω ~ 35m Ω
• Electrostatic shoes: 750k Ω ~ 100m Ω
• The touch screen enters the menu to arbitrarily adjust the resistance test range.
4. Linux motherboard
It provides a large amount of data storage, the network can transmit in Gigabit and supports a
variety of interface examples (USB2.0, serial port, HDMI) to connect to the high-resolution display
screen, with great scalability
23. • Linux host performance parameters
• Broadcom bcm2837, chipset, operating
frequency 1.2Ghz
• 64-bit quad-core arm cortex-a53
• 802.11 B / g / N WLAN
• Bluetooth 4.1
• Dual core vudeocore IV coprocessor
• All latest versions of Linux operating
systems are supported
• Memory: 2G
• Hard disk: 16g
• Micro USB connector 2.5A power supply
• 1 HDMI video port 1 audio port
• 1 100M Ethernet port
• 4 USB2 0 port 40 GPIO pins
• Resolution: up to 1920 * 1080
• Shell material: made of aluminum alloy
with high heat dissipation
• Working environment: – 15-60 ℃ 0% –
90% relative humidity
• Operating system: Linux
24. 5. 8-inch LCD
It can basically have the same functions as the LCD we
use. It can display photos in very high definition and
process display data at high speed. The most important
thing is that it can be perfectly combined with the gate
to show its natural atmosphere.
Industrial grade 8-inch LCD
Industrial 8-inch LCD will not appear unstable flower
screen with snowflakes like TFT color screen driven by
ordinary single-chip microcomputer.
Low temperature, HDMI interface, and computer
interface are common, easy to understand, and
disassemble.
25. 6. Foot test pedal
It is more efficient, convenient, and beautiful than an ordinary one-leg test.
The original ordinary foot pedal is a layer, and the screw will conduct electricity when contacting the
ground, which is easy to be wet, resulting in the inaccurate test. Now, after improving the upper and lower
layers, all the wiring screws are placed inside the pedal. The pedal is divided into two layers, which play
the role of insulation and moisture-proof and improve the aesthetic requirements.
Moisture-proof, waterproof, fall-proof, with shielding and anti-interference, the test is more accurate.
Precautions for electrostatic shoes
The soles of electrostatic shoes are made of PVC or PU foam materials, which are integrated with the
uppers, and then reinforced online. It can effectively release static electricity and form a complete anti-
static system with anti-static clothes. Electrostatic shoes are smart and lightweight. The middle layer of
the sole is equipped with anti-static EVA to relieve foot pressure and make them more soft and
comfortable.
26. The fabrics include: PVC leather / leather / leather /
Canvas / conductive silk / T / C fabric. The finished
shoes are beautiful and generous as a whole, strong
and anti-skid, with excellent wear resistance (5 times
higher than ordinary soles) and more environmental
protection. They are high-quality electrostatic shoes
that sell well all over the world.
Features: it can derive the static charge of the
human body, and the shoes do not precipitate dust.
It can more effectively prevent dust and antistatic.
Application scope: electronics, LCD / LCM / LED,
semiconductor production, instruments and meters,
microelectronics, pharmacy, and food
27. matters needing attention
1. Electrostatic shoes and conductive shoes should not wear insulated woolen thick socks and insulated insoles at
the same time. Electrostatic shoes are prohibited from being used as insulated shoes.
2. The place where electrostatic shoes are used shall be the anti-static ground, and the place where conductive
shoes are used shall be the conductive ground.
3. Electrostatic shoes should be used together with electrostatic clothing, and pay attention to the cleanliness,
waterproof, and moisture-proof of the product.
4. Generally, the resistance test shall be conducted once within 200 hours. If the resistance is not within the
specified range, it cannot be used as electrostatic leather shoes.
7. Single and double circuit socket
It is equipped with a single circuit wrist strap commonly used in the market and a double circuit wrist strap hole with
a headphone socket. The equipment is complete and can be changed at will
8. Background management software
It mainly realizes the functions of equipment management and data collection, comprehensive data processing,
monitoring equipment management, network linkage, alarm linkage, network mail sending, timely summary of data
reports, and so on.
28. Main functions of the system
The default language is English; You can also customize and add other languages;
Real-time display of test resistance value, visual display of and icons, card-swiping, etc., and automatic data
acquisition;
Support full-screen recording and display and live voice broadcasting;
Test wrist strap (single loop / dual loop / cordless)
Test electrostatic shoes (support one-foot test and two-foot test)
The test range can be written freely by computer, and the range value
Integration of test + card swiping + display screen, integration of stainless steel and acrylic
It can coordinate with attendance software. The database of attendance software and ESD system software must
be on one computer;
The data table provides import and export functions; Facilitates customer processing;
The software automatically synchronizes the time, and the personnel list is automatically synchronized to the ESD
equipment in real-time
29. It supports the export of multiple
reports. The list of unclipped cards
and test records are divided into the
left foot, right foot, and wrist details
Data update can be selected
arbitrarily, with stable speed and
arbitrary operation;
The database can be connected
with other software to support multi-
user and multi-computer real-time
management and monitoring;
30. The ESD access control system is divided into three modes, and each mode is different.
Mode 1: offline ESD access control system (tripod turnstile gate, flap barrier gate, swing turnstile gate, sliding
turnstile, and other equipment can be used). Electrostatic testers do not need to swipe their cards to directly
test electrostatic items. After the test is successful, the channel gate can enter the workshop. There is no
access card swiping test record query, and the traffic speed is fast.
Mode 2: networked ESD access control system(tripod turnstile gate, flap barrier gate, swing turnstile gate,
sliding turnstile, and other equipment can be used) electrostatic management software first registers the test
items of employee cards (name, Department, test items (only test hands, only test shoes, and no test card on
the same side of shoes).
The tester swipes the registered card at the ESD turnstile gate, and then tests according to the registered test
items, If the test is successful, the door can be opened to enter the workshop, and if it is unsuccessful, the door
will not be opened (replace shoes or wrist straps according to the unqualified results of the test items). The
static management software can record the entrance and exit time, channel, test items, test results, name, and
Department of the tester.
ESD access control system mode
31. Why should electronic factories install an ESD access control system? In fact, each of us will
have more or less static electricity, but some people have large static electricity and some
have small static electricity. Most electronic factories will involve electronic components.
Why need ESD access control system
Mode 3: networked ESD access control system+ LCD display (tripod turnstile gate, flap barrier gate, swing
turnstile gate, sliding turnstile, and other equipment can be used) integrates LCD display on the basis of
networked ESD access control system. After swiping the card, the name, card number, event test items,
results, and other information can be displayed.
The electronics factory can choose any of the above three modes to let all personnel who need to enter the
factory pass through the ESD access control system turnstile gate of the electrostatic instrument. When the
static electricity of the human body exceeds a certain resistance, the pedestrian access gate will prompt that
the test fails, refuse them to pass, and require retesting. In addition, they must swipe the card and generate
records at the same time, Recheck suspicious personnel or refuse to enter the workshop, and ensure the
production and quality of products.
32. If the electrostatic voltage that the human body can feel is more
than 2-4kv, if we contact the static electricity we carry in our life
with IC components, almost all ICs will be damaged. In addition,
static electricity can absorb dust, which will change the
impedance before the line, seriously affect its service life, and
more seriously, produce unqualified products. If there are no
corresponding protective measures in the work, a batch of
waste products will be produced, which will bring huge losses
to the enterprise.
Static electricity exists all the time. So how can we prevent it!
Generally, some manufacturers will provide anti-static clothes,
shoes, gloves, hats, and other products. However, the anti-
static ability of this kind of product will be reduced after a long
time. How can I know whether my anti-static equipment is
effective and can be replaced in time? ESD access control
system can solve this kind of problem.
34. Features of management software
One computer can manage multiple sets of ESD access control systems at the same time.
RS485 or TCP/IP communication connection computer management.
It can be used for personnel permission group classification, real-time monitoring, or batch management. It can
display the test results of employees every day and record them in the database. The test query results can be
saved, analyzed, and utilized.
It can display the test results, record the error causes, such as no bracelet, no left shoe, no right shoe, illegal card,
wrong time zone, or too long door opening, and display the door number, card number, job number, name, and
other data.
It can query according to various conditions and make multi-functional ESD electrostatic access control
management reports according to the combination of conditions such as a month, date, Department, individual, or
various error reasons.
It has the procedure of transferring to an excel personnel data sheet, which can directly import the existing
personnel datasheet into ESD software.