Match the items in the two columns below by entering the appropriate c.docx

•Transferir como DOCX, PDF•

0 gostou•4 visualizações

The document matches terms related to manufacturing costs and processes with their definitions. It provides 10 multiple choice options to correctly pair a cost or process term with its definition. The pairs include linking a material requisition form, job order costing, manufacturing overhead, production variances, and timecards to their proper definitions.

Educação

Match the items in the two columns below by entering the appropriate code letter in the space
provided.
Used to apply manufacturing overhead to jobs.
Measures, records, and reports product costs.
When actual manufacturing overhead costs are greater than the overhead applied to products.
Manufacturing cost accounts are fully integrated into the general ledger.
Source document which authorizes issuance of raw materials to production.
Appropriate when products have distinguishing and heterogeneous characteristics.
Constitute a subsidiary ledger for Work in Process Inventory.
Indicates number of hours that employees work and the account to be charged.
Appropriate when products are similar and are produced continuously.
When actual manufacturing overhead costs are less than the overhead applied to products.
Solution
1.Â Â HÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 6.Â Â Â E
2.Â Â AÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 7.Â Â Â G
3.Â Â JÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 8.Â Â Â C
4.Â Â DÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 9.Â Â Â F
5.Â Â BÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 10.Â Â Â I

Mais conteúdo relacionado

Semelhante a Match the items in the two columns below by entering the appropriate c.docx

Chapter4 job costing

kamran

By Analyzing and Utilizing Jean Watson theory of caring, create 6-7 slides PowerPoints including your sources on Improvement in two nursing areas: · Nursing research · Health disparities Your sources should be within the last 5 years. Only 2 sources Name_______________________________ Overview:The connect question requires creation of posted transactions common to manufacturing companies to inventory T-accounts. This assignment builds on these transactions with additional detail relating to the application and incurrence of overhead. Students will complete journal entries and common reports relating to the activity through the cost accounts, including clearing any over- or under-applied overhead. Budgeted/estimated, applied and actual overhead will be examined using multiple application methods including traditional predetermined rates and activity-based costing. Various methods of overhead application will be compared in totality as well as more specifically at a job level basis. Students also will explore the impact of overhead costing in the bidding process typical of companies using job costing. Use “given” and your “results” from HW 2.1 Question 15 on CONNECT relating to Lock-Tite Company to complete the Project requirements below. Make sure you are using CORRECT answers from connect. 1) Write journal entries in good format for Lock-Tite Company for the following transactions for the period as calculated/given in the problem on CONNECT. Ref. Account Debit Credit a) Raw Material purchased on account a b) Raw Material used as direct and indirect material b c) Recognition of direct and indirect labor owed to employees c d) Application of factory overhead to work-in-process d e) Recognition of Cost of Goods Manufactured e f) Recognition of Sales Revenue f g) Recognition of Cost of Goods Sold g h) Incurrence of other overhead costs (use “various” to represent multiple accounts. h 2) Adjusting Factory Overhead: Use these T-accounts to complete the requirements below: COGS Unadjusted Balance from connect AJE Adjusted COGS balances Factory Overhead Unadjusted Balance AJE Adjusted COGS balances a) Include the unadjusted balances in the T accounts above. The COGS unadjusted balance can be found in the partial income statement underneath the T accounts on Question 11 of connect HW2.1 assignment. The unadjusted Factory Overhead balance is the last row of the Factory Overhead T account again in Question 15 of connect HW2.1 assignment. b) Assume Lock-Tite clears all its under- or over-applied overhead to cost of goods sold. Write the “adjusting” journal entry to zero the Factory Overhead account. c) Post the journal entry to the COGS and FOH T accounts above 2a and calculate the “adjusted balances for ...

By Analyzing and Utilizing Jean Watson theory of caring, creat

TawnaDelatorrejs

Job costing and batch costing

N A M COLLEGE KALLIKKANDY

Process costing

Somaiyah Sarwar

Integrated and non integrated accounts part i

Mahesh Chandra Sharma

Sample powerpoint

kelleymitchll

To determine the cost of goods we have to determine the factory overhead. Cost of goods are included all the costs occurred during the production including direct and indirect material, labor and all the factory overhead costs. We use allocation method to determine the factory overhead costs. If we can’t determine the factory overhead costs we can’t find out the actual cost of the goods those are produced and the sale value we can’t determine correctly. Because cost of a good is consisted with factory overhead costs. Factory overhead expenses should be determined otherwise understated rate of a good can occur. Because if we can’t determine the factory overhead costs we can’t actually determine the cost of a good that is prepared for sale. Allocation methods are used to determine factory overhead costs. Organizations use Applied or Actual factory overhead allocation methods to determine the Factory overhead costs. Cost of goods are lied with these factory overhead costs. So if we need to determine the amount in which we need to sale a good we need to determine it’s total manufacturing costs. Otherwise loss will occur.

WHY IS THE ALLOCATION METHOD USED IN ACCOUNTING FOR THE DIFFERENCE BETWEEN AP...

Mashfiq Albartross

CH05 Job Costing.ppt

hassanakhar

Solutions Manual for Managerial Accounting 5th Edition by Wild

riven019

New general ledger accounting in sap

Rajeev Kumar

11 job costing

MD. Monzurul Karim Shanchay

Acc 349 Preview Full Course

fasthomeworkhelpdotcome

Average vs-standard-costing1

Umer5555

Product Costing and Cost Accumulation in a Batch Production Environment Chapter 3 Copyright © 2014 by The McGraw-Hill Companies, Inc. All rights reserved. McGraw-Hill/Irwin Reviewer (R) - Slide 1 NN Added the title of the chapter. Reviewer (R) - CHAPTER 3 CORRECTIONS REQUIRED Note that pagination of the slides is inconsistent. Some slides have a slide number (bottom right), while other slides have no slide number. Chapter 3: Product Costing and Cost Accumulation in a Batch Production Environment Product and Service Costing Financial Accounting Product costs are used to value inventory on the balance sheet and to compute cost of goods sold on the income statement. Managerial Accounting and Cost Management Product costs are used for planning, control, directing, and management decision making. 3-* Other Interested Organizations There is an ever increasing need to use data in external organizations as well. Product costing is the assignment of production costs to all output of the organization. A product-costing system accumulates the costs incurred in a production process and assigns those costs to the organization’s outputs. Product costing produces data that are needed for a variety of purposes in financial accounting, managerial accounting, and cost management. Use in Financial Accounting – Products costs are used to value inventory on the balance sheet and to compute the cost of goods sold on the income statement. Use in Managerial Accounting - Product costs are needed to help management plan, control, and direct operations. In addition, they are needed to help with management decision making. Use in Reporting to Interested Organizations – There is an ever-growing need for product cost information in relationships between firms and outside organizations. (LO 3-1) Flow of Costs in Manufacturing Firm 3-* Manufacturing costs consist of direct material, direct labor, and manufacturing overhead. As production takes place, all manufacturing costs are added to the Work-in-Process Inventory (WIP) account with a debit. As soon as products are completed, their product costs are transferred from Work-in-Process Inventory to Finished-Goods Inventory with a credit to Work in Process and a debit to Finished Goods. During the time period when products are sold, the product cost of the inventory sold is removed from Finished Goods and added to Cost of Goods Sold, which is an expense of the period in which the sale occurred. A credit to Finished Goods and a debit to Cost of Goods Sold completes this step. Cost of Goods Sold is closed into the Income Summary account at the end of the accounting period, along with all other expenses and revenues of the period. We will look at this in more detail and go through each journal entry recorded as the costs progress through the accounting system. (LO 3-2) Sheet1Work-in-Process InventoryFinished Goods InventoryDirect material costProduct cost transferredDirect labor costManufacturi ...

Product Costing and Cost Accumulation in a Batch Productio.docx

stilliegeorgiana

How To Prepare A Worksheet - Bookkeeping

Divine Grace Martinez

Budgetting for pm .

Richard Opiyo

Product costing part1-cost center planning

Nallasamy Mohanraj

UNIT 2 PROCESS COSTING.pptx

ENOCK13

Activity based costing

Pham Anh Tai

Semelhante a Match the items in the two columns below by entering the appropriate c.docx (19)

Chapter4 job costing

By Analyzing and Utilizing Jean Watson theory of caring, creat

Job costing and batch costing

Process costing

Integrated and non integrated accounts part i

Sample powerpoint

WHY IS THE ALLOCATION METHOD USED IN ACCOUNTING FOR THE DIFFERENCE BETWEEN AP...

CH05 Job Costing.ppt

Solutions Manual for Managerial Accounting 5th Edition by Wild

New general ledger accounting in sap

11 job costing

Acc 349 Preview Full Course

Average vs-standard-costing1

Product Costing and Cost Accumulation in a Batch Productio.docx

How To Prepare A Worksheet - Bookkeeping

Budgetting for pm .

Product costing part1-cost center planning

UNIT 2 PROCESS COSTING.pptx

Activity based costing

Mais de sngyun4t79

Presented below is information for Wildhorse Corp., for the year 2025. Prepare a multiple-step income statement for 2025. Assume the 250,000 shares of common stock were outstanding during 2025 . (List Other nevenues before Other expenses. Round earnings per share to 2 decimal places, e. 5. 5.2.) Earnungs per share of comimon stock: Incume from Continuling Oucrations Divcontunaed Operanion) Net lncome J itoss) .

Presented below is information for Wildhorse Corp-- for the year 2025-.docx

sngyun4t79

Practice the following diagnostic statements using your Manual ICD-10-CM , 2022. Lofters Pneumonia Premature menopause conn's syndrome. Acute Leukemia Malignant neoplasm of Brain (parietal lobe) Malignant neoplasm of the left ovary. Benign neoplasm of the cornea of Rt. Eye Kaposi sarcoma of the right lung Adeno carcinoma of the urinary Bladder Type 2 diabetes without complications. Malignant carcinoma of the rt&Lt female breast Accidental overdose of antidepressant Hive due to reaction from penicillin prescribed "(initial encounter) Patient poisoned accidentally by ketotifen substance. please, make sure the code are correct! Thanks .

Practice the following diagnostic statements using your Manual ICD-10.docx

sngyun4t79

Potentials Question 15 Unanswered Hypokalemia (low extracellular K+ concentration), if sustained, will cause A depolarization B hyperpolarization C maintenance of resting membrane potential D difficulty achieving action potentials E both B and D are true Potentials Question 14 Unanswered Absolute and relative refractory periods are important aspects of which of the following? A Action potentials B Resting potentials C Hyperpolarizing graded potentials D Graded potentials .

Potentials Question 15 Unanswered Hypokalemia (low extracellular K+ co.docx

sngyun4t79

Practice Management or Electronic Health Record? As a healthcare professional, it is important to note the differences between practice management software and electronic health record interfaces. Drag each activity below into the proper category to classify it as something done in a practice management program or in an EHR. Documenting encounter details Practice Management Tasks Electronic Health Record Tasks Accessing clinical trial research Entering administrative patient data, such as addresses Coding Submitting insurance claims Entering clinical patient data, such as medical history Ordering prescriptions .

Practice Management or Electronic Health Record- As a healthcare profe.docx

sngyun4t79

Prance, Inc., earned pretax book net income of $941 , 000 in 2020. Prance acquires a depreciable asset that year, and first-year tax depreciation exceeds book depreciation by $94 , 100 . Prance reported no other temporary or permanent book-tax differences. The pertinent U.S. Federal corporate income tax rate is 21% , and Prance earns an after-tax rate of return on capital of 8% . Enter below Prance's 2020 deferred tax expense and any deferred tax asset or liability. .

Prance- Inc-- earned pretax book net income of $941-000 in 2020- Pranc.docx

sngyun4t79

ppl ppl ppl Match each ecosystem-biome with its traditional mone.docx

sngyun4t79

Prepare Common-size financials for the Balance Sheet and Income Statem.docx

sngyun4t79

Q10. A person has inhaled carbon monoxide CO poisoning. CO has an extremely high affinity for hemoglobin (much higher than that of oxygen for hemoglobin) leaving a lower fraction of oxygen binding sites on Hgb available to be occupied by oxygen. What would you expect to find if you measure the arterial oxygen content of a person with CO poisoning? a) Normal oxygen content b) Decreased oxygen content c) Increased oxygen content .

Q10- A person has inhaled carbon monoxide CO poisoning- CO has an ext.docx

sngyun4t79

Python Create 3 variables named: userName result userNum Prompt the user for their name and to enter any number. Complete the following processes on separate lines or for a challenge, write the equation on one line, storing the value in the result variable. (Using your knowledge of order of precedence.) Add 3 Double the result. Subtract 4 Divide the number in half Subtract Your Original Number Print the result to the screen. Run the code to display your output. .

Python Create 3 variables named- userName result userNum Prompt the u.docx

sngyun4t79

Python coding Question Assume the availability of a function is_prime-.docx

sngyun4t79

Puerto Rico has been devastated by hurricane Maria. Three weeks after the hurricane struck the island, power and cell phone communications is still out in most locations, transportation is difficult, and people in many areas lack basic food, shelter, and clothing. You work for FEMA and have been assigned to organize and manage the effort to restore infrastructure: e.g., electricity, cell phone service, and water. (Colleagues at FEMA have been assigned to address other issues, such as clearing the roads, restoring the ports and airports, providing food and shelter for displaced residents). Although the entire effort is expected to take 6 to 9 months, it is critical that you prioritize and restore key areas first. .

Puerto Rico has been devastated by hurricane Maria- Three weeks after.docx

sngyun4t79

public static void main(String-- args) { int i- int-- list - {0-1-0-4-.docx

sngyun4t79

Provide an example of an evervday material that is linearly elastic Pr.docx

sngyun4t79

Proteins in the blood plasma involved in hemostasis include Albumins A.docx

sngyun4t79

Proteins that lack a vacuolar localization signal will be secreted into the apoplast (i.e., outside of the cell). True False Which of the following are true about oil bodies? (choose all that apply) They are surrounded by a lipid monolayer. Oleosin is a protein found in the membrane of oil bodies. They are initiated in a region of the ER membrane. They have a hydrophilic lumen. Which of these is true about peroxisomes? They are a single-membrane-bilayer-bound organelle where reactive oxygen species are detoxified. They only perform reactions involving the enzyme catalase. They can only form through the division of other peroxisomes. They are only found in the cells of seeds. Question 11 1 pts Which type of plastid is used for gravity sensing? Chloroplast Amyloplast Etioplast Chromoplast .

Proteins that lack a vacuolar localization signal will be secreted int.docx

sngyun4t79

Protective factors are anything that supports mental health and wellbeing. Protective factors support resilience when difficult situations occur and reduce the impact of stress and other risk factors. Match the correct statement with the term. Good coping skills, good interpersonal skills, positive self-esteem, a sense of empowerment - self-efficacy, good physical health including nutrition, exercise and sleep, a good understanding of own health and wellbeing Having a supportive family who lives nearby, being involved in social activities, having good friendships, having a healthy relationship, having opportunities to engage in meaningful work or volunteering, having good links to culture and opportunities to practise culture, having opportunities to engage with spiritual activities Housing issues, difficult neighbourhood, lack of community connections Choose... Social/cultural protective factors Isolation, lack of family members around, family problems, financial problems Individual protective factor Environmental protective factor Environmental risk factors Financially secure, living in a safe neighbourhood, local community supports Individual risk factor Poor physical health, poor nutrition, limited coping skills, past experience of abuse Social risk factors and neglect noose... .

Protective factors are anything that supports mental health and wellbe.docx

sngyun4t79

Protein Structure - Briefiy explain the dynamics between amino ocid sequence, protein structure, \& proteinfunction - Roughly sketch the four levels of proteinfolding; lobel the bonds and molecular groups thot hald the type of structure together. - Illustrote how omino ocid substitutions in a protein will offect its structure/function ond exploin how genetic duplicotion, mutotion, ond functional constraints leod to the evolution of protein fomilies. .

Protein Structure - Briefiy explain the dynamics between amino ocid se.docx

sngyun4t79

project 1 : ARP table extraction. the first part of the program must handle the extraction of the ARP table data.The data must be saved in a dynamic structure in which the IP address corresponds to the MAC address.The structure is required for later comparison operations to identify duplicated addresses. 1.Plan a function that will extract the ARP table data fron the machine.How can Python access this type of data. How would the data be saved for late use. 2.Import the required modules for the program. 3.Define a function that will handle the ARP data extraction. 4.Create three variables: one to store the ARP table data, another to store a list of the separated lines,and the third to store the final filtered data. 5.Iterate over the lines and save the IP addresses and corresponding MAC addresses after data filtration.Only IP and MAC addresses should be saved in the third variable.Filter the rest of the data such as the interface's IP address or broadcast data. .

project 1 - ARP table extraction- the first part of the program must h.docx

sngyun4t79

PROJECT MANAGEMENT ASSIGNMENT Tell me a project example from your experience OR make up an example of a project by clearly defining the key components (i.e. characteristics such as its objective as well as time, budget, and resource constraints) of that project. For the same project, define the key stakeholders and their roles in the project (i.e. Project manager, Line/function manager, Sponsor/executives). .

PROJECT MANAGEMENT ASSIGNMENT Tell me a project example from your expe.docx

sngyun4t79

Positive directional linear selection on a trait always results in the... Trait mean increasing over time within the cohort under selection No change in trait mean over time within the cohort if heritability is zero Trait mean and variance decreasing between cohorts (generations) Trait mean increasing between cohorts (generations) Trait mean and variance increasing over time within the cohort under selection .

Positive directional linear selection on a trait always results in the.docx

sngyun4t79

Mais de sngyun4t79 (20)