Plasti Chemie is manufacturing fast curing Plastifloor and Plastipur resins since 1995. Plastifloor Plastipur and Plastistone resins are shipped into 50 countries. Check out also www.plasti-chemie.de
Algitech Chemicals is an Indian company established in 1992 that manufactures and supplies waterproofing membranes, crack and expansion joint fillers, bonding agents, and other construction chemical products. They have a team of qualified professionals and modern production facilities that allow them to meet customer needs. Their goal is to stay updated on industry developments and maintain high product quality standards.
This document provides information about Chloris Speciality Chemicals, including their headquarters, factory, sales offices, contact information, and product listings. It introduces Chloris as a pioneer in the construction chemicals industry offering high quality building chemicals. It then lists various product lines including concrete repair mortars, curing compounds, shuttering release agents, bonding agents, flooring systems, renders and plasters, engineering grouts, tile adhesives and grouts, epoxy adhesives and grouts, mastic adhesives, latex motor bed systems, waterproofing, protective coatings, bitumen products, and miracle sealant products.
Lubrication and Mechanical Stabilization of Rigid PVC FormulationsTom Pedersen
This document discusses lubrication and mechanical stabilization of rigid PVC formulations. It describes typical rigid PVC formulations that include PVC resin, tin stabilizer, lubricants like paraffin waxes, calcium carbonate, and pigments. The document examines how lubricants like paraffin waxes, calcium stearate, and polyethylene waxes prevent PVC degradation during heating and shearing. It also summarizes a study showing that rigid PVC can be processed without conventional heat stabilizers if adequate lubrication is provided through paraffin waxes, calcium stearate and oxidized polyethylene wax. The document concludes that lubricants serve as both rheology modifiers and mechanical stabilizers for rigid PVC.
Function and Performance of Hydrocarbon Waxes in Rigid PVCTom Pedersen
The document discusses the function of hydrocarbon waxes in rigid PVC. It explains that waxes with carbon numbers of C30 to C36 work best as primary lubricants for PVC in North America. The lubricant system must be carefully adjusted to match the specific processing equipment used by each PVC manufacturer. Getting the lubrication right is crucial but complex, requiring in-depth technical support from wax suppliers.
Function of Waxes in PVC Pipe ExtrusionTom Pedersen
The document discusses the function of waxes in PVC pipe extrusion. It notes that paraffin waxes have been used for over 40 years to lubricate rigid PVC and help prevent degradation during heating and shearing. Waxes also define rheology and control fusion during extrusion. The keys to better PVC products and processing are getting the lubricant system right, as it affects properties and is a constant balancing act.
The document is the October 2017 specification published by the International Glassfibre Reinforced Concrete Association (GRCA) for the manufacture, curing, and testing of glassfibre reinforced concrete (GRC) products. It provides specifications for constituent materials, mix designs, manufacturing processes, quality control, sampling and testing requirements for GRC grades. The specification is intended to enable architects and engineers to specify appropriate GRC materials for construction projects.
Lubricating Rigid PVC Pipe Formulations, Current Issues and OptionsTom Pedersen
This document discusses the history and future of lubricants used in rigid PVC applications. It notes that paraffin waxes have been the primary lubricant used for over 40 years. However, supplies of fully refined paraffin wax in North America have declined as refineries have stopped wax production. Imports from China have increased to meet demand. The document also explores potential alternative lubricant technologies using bio-based or synthetic waxes to ensure adequate long-term supply as rigid PVC production increases. Rheogistics proposes a hybrid ester-based lubricant as one alternative that could provide competitive economics and similar performance to traditional paraffin-based systems.
NOVATEX has given training on their production department where I got a chance to know many the technical aspect of processing of PET resin in Polycon Department (Esterification, Disk Ring Reactor, Distillation, Others) and Solid State Polymerization (SSP) Department and other Utility (Nitrogen Plant, Demin Water, Raw Water, Compressor Unit), HSE, Quality Control, Mechanical Department and Power House.
Algitech Chemicals is an Indian company established in 1992 that manufactures and supplies waterproofing membranes, crack and expansion joint fillers, bonding agents, and other construction chemical products. They have a team of qualified professionals and modern production facilities that allow them to meet customer needs. Their goal is to stay updated on industry developments and maintain high product quality standards.
This document provides information about Chloris Speciality Chemicals, including their headquarters, factory, sales offices, contact information, and product listings. It introduces Chloris as a pioneer in the construction chemicals industry offering high quality building chemicals. It then lists various product lines including concrete repair mortars, curing compounds, shuttering release agents, bonding agents, flooring systems, renders and plasters, engineering grouts, tile adhesives and grouts, epoxy adhesives and grouts, mastic adhesives, latex motor bed systems, waterproofing, protective coatings, bitumen products, and miracle sealant products.
Lubrication and Mechanical Stabilization of Rigid PVC FormulationsTom Pedersen
This document discusses lubrication and mechanical stabilization of rigid PVC formulations. It describes typical rigid PVC formulations that include PVC resin, tin stabilizer, lubricants like paraffin waxes, calcium carbonate, and pigments. The document examines how lubricants like paraffin waxes, calcium stearate, and polyethylene waxes prevent PVC degradation during heating and shearing. It also summarizes a study showing that rigid PVC can be processed without conventional heat stabilizers if adequate lubrication is provided through paraffin waxes, calcium stearate and oxidized polyethylene wax. The document concludes that lubricants serve as both rheology modifiers and mechanical stabilizers for rigid PVC.
Function and Performance of Hydrocarbon Waxes in Rigid PVCTom Pedersen
The document discusses the function of hydrocarbon waxes in rigid PVC. It explains that waxes with carbon numbers of C30 to C36 work best as primary lubricants for PVC in North America. The lubricant system must be carefully adjusted to match the specific processing equipment used by each PVC manufacturer. Getting the lubrication right is crucial but complex, requiring in-depth technical support from wax suppliers.
Function of Waxes in PVC Pipe ExtrusionTom Pedersen
The document discusses the function of waxes in PVC pipe extrusion. It notes that paraffin waxes have been used for over 40 years to lubricate rigid PVC and help prevent degradation during heating and shearing. Waxes also define rheology and control fusion during extrusion. The keys to better PVC products and processing are getting the lubricant system right, as it affects properties and is a constant balancing act.
The document is the October 2017 specification published by the International Glassfibre Reinforced Concrete Association (GRCA) for the manufacture, curing, and testing of glassfibre reinforced concrete (GRC) products. It provides specifications for constituent materials, mix designs, manufacturing processes, quality control, sampling and testing requirements for GRC grades. The specification is intended to enable architects and engineers to specify appropriate GRC materials for construction projects.
Lubricating Rigid PVC Pipe Formulations, Current Issues and OptionsTom Pedersen
This document discusses the history and future of lubricants used in rigid PVC applications. It notes that paraffin waxes have been the primary lubricant used for over 40 years. However, supplies of fully refined paraffin wax in North America have declined as refineries have stopped wax production. Imports from China have increased to meet demand. The document also explores potential alternative lubricant technologies using bio-based or synthetic waxes to ensure adequate long-term supply as rigid PVC production increases. Rheogistics proposes a hybrid ester-based lubricant as one alternative that could provide competitive economics and similar performance to traditional paraffin-based systems.
NOVATEX has given training on their production department where I got a chance to know many the technical aspect of processing of PET resin in Polycon Department (Esterification, Disk Ring Reactor, Distillation, Others) and Solid State Polymerization (SSP) Department and other Utility (Nitrogen Plant, Demin Water, Raw Water, Compressor Unit), HSE, Quality Control, Mechanical Department and Power House.
Started in 1984, Polytek® Development Corp. is a leading manufacturer of specialty polymers including
polyurethane elastomers and casting resins, silicone, latex, plastisol, thermoplastic elastomers, and epoxies.
These systems are used primarily in mold making and casting applications in industrial, construction,
entertainment, fine arts and technology sectors.
Hebei Shida Seal Group is an IATF 16949 certified manufacturer of automotive sealing systems, body and glass weather-strips, rubber extrusions, extruded rubber profiles, trim seals, mouldings, gaskets and moulded rubber products from Hebei, China.
Tooling Capabilities: Designs and manufactures rubber & plastic extrusion dies, moulds and checking aids and fixtures.
Mixing Capabilities: Custom rubber mixing and formulating including compound development, internal mixing and open mill mixing of black or coloured compounds (strips, slabs, calendared and extrusions).
Extruding Capabilities: Offers extrusions capabilities for rubber extrusion, thermoplastic extrusion, and silicone extrusion.
Moulding Capabilities: Offers rubber compression moulding, rubber injection moulding, plastic injection moulding, silicone compression moulding services.
Finishing Capabilities: Offers taping, cutting, coating, printing, drilling, splicing, notching, punching, flocking, injection moulding services (in-line processes and off-line processes).
Keywords: Edge protectors, Glazing Profiles, Glass Run Channels, Edging Profile, Door sealing Profile, Sealing Profile soft rubber, Mono Profile, Finger guard Profile, Sponge rubber Profile, Special Profile, Injection Moulding, Corner Radius, Draw-cords, Hooks, Clips, Thermoplastic profiles, Edge protectors (automotive), Automotive Trim Seal Push in Bulb Seals Push On Edge Seal Push on Weatherstrip Push in Vinyl Trim Push on Vinyl Edge Trim Trim Seals Push on Edging Push On Edge Trim Rubber Seals Rubber Trim Seals Push On Trim Seal Trim Seals, Automotive Rubber Trim Seals , secondary door seals, vehicle body mounted seals rubber weather-strips, co-extruded trim seals bulb trim seals push-on trim seals edge protection sealing profiles edge protectors and sealing profiles edging profiles clip on sealing profiles, self-gripping profile with sponge rubber,metal clamping rubber profiles, reinforced rubber profiles with steel carriers self-gripping gaskets.
This document provides information on products from KCT Co., Ltd. and its subsidiaries, including solvent-based rubber marking paint and mandrel release agent. The marking paint is for identifying green rubber surfaces and offers various colors. The release agent is silicone-free and suitable for peroxide-cured EPDM rubber. Both products are customized to meet customer needs and have properties like fast drying times and chemical stability at high temperatures. The document also lists distributors in countries like Thailand.
Comparative Study on Compressive Strength of Self Cured Concrete and Normally...IRJET Journal
This study compared the compressive strength of self-cured concrete to normally cured concrete. Paraffin wax was used as a self-curing agent at dosages ranging from 0.2% to 1% by weight of cement. Concrete mixes of M20, M25, M30 and M40 grade were tested. Results found that concrete cured with paraffin wax achieved similar compressive strengths as concrete cured through immersion, with strengths reaching up to 99% of normally cured concrete. Using paraffin wax as a self-curing agent can help reduce water evaporation and provide adequate curing without needing extensive water sources, especially in construction sites with limited water access.
Hebei Shida Seal Group is a manufacturer of Trim Seals / Gaskets / Weatherstrips from China.
Our products include: Plastic Extrusions
PVC Plastic Edge Trim
Rubber Edge Trim
Rubber Extrusions
Co-extruded Trim Seal
Bulb Trim Seal
Push-on Trim Seal
Rubber Edge Trim Seal
EPDM Sponge Rubber Seal
D-shaped Rubber Seal
P-shaped Rubber Seal
Ribbed style Rubber Seal
Rubber and Plastic Profiles
Sponge Rubber Profiles
Edge Protectors
Edge Trims, Rubber + PVC
Trim Seals, Co-Extruded Profiles
Gasket Sealing Profiles
Rubber Edge Sealing
Self-clamping Gasketing
Edge Protection Profiles
Edge Protection Sealing Profiles
Self-gripping Sealing Profiles
Clip-on Sealing Profiles EPDM
Rubber extrusions can be spliced and vulcanized to form an endless variety of shapes. Our extensive splicing capabilities allow us to produce seals and gaskets for a broad array of aerospace, automotive, chemical processing, construction, food processing, industrial, oil and gas, as well as wire and cable applications.
We have the capability to splice / joint rubber extrusions for applications that require a continuous seal – solid rubber extrusions, sponge rubber extrusions, co-extruded trim seals. When designing a spliced seal, the key consideration is the physical integrity of the joint.
Our capabilities support cold and hot splicing as well as transfer and molded splicing.
Cold Splicing
Simply a matter of gluing two or more pieces of a seal together using quick-setting glue such as cyano-acrylate or super glue. Cold splicing is generally less expensive, depending on the design of the seal and the complexity of the cross section.
Hot Splicing
Considered to be the industry standard and most desirable when cosmetics are a concern. The glue used in hot splicing is rubber-based and has to be cured, or vulcanized, in place. This creates a splice that has reasonable strength, retains properties of the seal, and is inconspicous.
Injection Splicing
Works similar to injection molding. A mold is created so that two or more pieces of a seal can be inserted into the tooling. A polymer is then injected or transferred into the mold cavity, adhering the ends of the seal and creating a continuous seal or multi-sided gasket. The process allows for much greater detail work on the seal, producing a splice that is aesthetically pleasing.
1. The document provides information about RustX, a manufacturer of vapor corrosion inhibition (VCI) films and packaging solutions. It discusses RustX's history, facilities, customers, and technical leadership team.
2. RustX produces multi-layer co-extruded VCI films using patented SMP VCI technology to provide corrosion protection for up to 5 years. Their co-extrusion process results in films with better moisture and oxygen barrier properties compared to single layer films.
3. The document proposes RustX's power stretch film as a solution for aluminum mills, noting its high adhesive strength, corrosion prevention properties, and ability to form an excellent cocoon around coils to prevent moisture penetration for
PVC volume cost, How to use Fillers judicouslySiddhartha Roy
Siddhartha Roy explains to concept of Volume Cost with respect to PVC Pipes and cautions against too much filler loading. Many PVC pipe firms have collapsed because the implications of Volume costs were not understood,
This technical data sheet summarizes the properties and use of SPUR+ 1015LM, a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Key features include broad formulation latitude, excellent adhesion without primers, good durability indoors and outdoors, and high elastic recovery. Typical applications include building and construction sealants requiring good elastic recovery. The document provides details on the prepolymer's characteristics, recommended formulations, and test results demonstrating properties like adhesion and mechanical performance.
Calco Polychem is a company established in 1999 that manufactures a comprehensive range of masterbatches and fillers. It has expanded from a single production line to six lines with an annual capacity of over 8,000MT. The company prides itself on a blend of experienced and young professionals, as well as an in-house R&D team that provides customized solutions. Calco Polychem produces a variety of masterbatch products, including white, black, colored, and additive masterbatches, to serve customers across various industries.
Ramsay are a UK leading gasket manufacturer. Supplying custom die-cut gaskets, foam tapes and thermoformed parts in technical lightweight materials. For sealing, NVH, thermal and acoustic applications to OEMs across industry and the world.
Our objective is to provide our customers with quality products in accordance with TS16949, ISO14001 and ISO9001 standards, to deliver a guaranteed service. With over 50 years of material, process and application knowledge, combined with a cost and time effective solution based approach, we have ensured that we remain at the fore-front of our industry.
For more information please feel free to read our company e-brochure.
This document discusses Covestro AG's aqueous dispersions product line. It provides an overview of Covestro's mission to invent solutions for customers' needs through a curious and courageous corporate culture. It highlights Covestro's extensive portfolio of aqueous dispersions for coatings and adhesives, including polyurethane, polyacrylate, and polyester dispersions. The dispersions offer eco-friendly and efficient formulation options for various applications like wood coatings, automotive, and more. Covestro aims to enhance customers' process efficiency and provide outstanding quality and global supply security.
The document discusses various polyester and polyether polyol products from Covestro that can be used in polyurethane formulations. It provides tables listing specific Desmophen and Baycoll-branded products, including their viscosity, OH content, glass transition temperature, and brief comments on their applications and characteristics. The document emphasizes Covestro's long experience in polyurethane chemistry and their focus on developing sustainable and efficient polyol solutions to meet customer needs.
This document describes Plastifloor®, a German-made resinous flooring system. Plastifloor® products are based on methyl methacrylate (MMA) resins developed since 1995. The system includes primers, base coats, sealers, and topcoats that are customized for different industrial and commercial applications. Plastifloor® floors have proven durable in tough conditions due to their rapid curing, hygienic and mechanical properties, and German engineering quality. The flooring systems are used worldwide in industrial, commercial, and institutional settings.
Plastifloor produces MMA and PUMMA resin flooring systems in Germany. The resins were developed in 1995 and have proven effective in tough industrial and commercial conditions due to their fast curing, hygienic, and durable properties. Plastifloor offers a variety of resin products for primers, base coats, sealers, and topcoats that are customized for different substrate types and performance requirements.
This document provides an overview of Pidilite Industries Ltd's adhesive product range for various industries. It discusses their FV Adhesive-II range which covers products for upholstery, flooring, footwear, and HVAC applications. It then summarizes specific adhesive products for upholstery, flooring, wallpaper, footwear, and insulation applications. For each segment, it highlights the available packaging and key features and benefits of flagship products.
This document summarizes the history and operations of Termopol Polimer Sanayi ve Ticaret A.Ş., a Turkish manufacturer of thermoplastic elastomers (TPEs). Key milestones in the company's growth include becoming a Kraton Polymers distributor in 2001, starting TPE production in 2006, and expanding production capacity to 10,000 tons per year. The company serves customers in extrusion applications and exports 65% of its sales. It has ISO 9001 certification and FDA approval for some product lines.
Covestro is the world's leading manufacturer of aliphatic and aromatic polyisocyanates and offers an extensive range of innovative products and solutions for the coatings and adhesives industries. Covestro aims to help customers turn challenges like increasing quality demands and sustainability expectations into competitive advantages through innovation. Covestro has over 80 years of experience innovating polyisocyanate products and developing solutions that enhance process efficiency while reducing waste and emissions to contribute to sustainability.
Blast It Clean It Paint It Pty Ltd is an Australian company established in 1994 that specializes in sodium bicarbonate blasting and polyurea coatings. They provide industrial cleaning, blasting, painting and coating services to a wide range of industries. Their aim is to provide high quality and reliable services on schedule and budget. Notable past projects include blasting and painting a Russian submarine at sea. They were also pioneers in introducing sodium bicarbonate blasting technology to Australia. The company has since expanded into polyurea coatings and provides services such as bridge lining and waterproofing.
PROPOSAL FOR HY GRIP WATERPROOFING MEMBRANE FOR NISHAT JSC WORKINGMuhammad Nabeel Alvi
This document provides information about joint sealing compound waterproofing treatments from Pak Hy-Oils Limited. It includes:
1. An overview of Pak Hy-Oils Limited, which produces joint sealing compounds and other waterproofing and asphalt products.
2. Details on the multi-layer installation process for the joint sealing compound waterproofing system.
3. Highlights of the benefits of the joint sealing compound system, such as flexibility and excellent water resistance.
4. Confirmation that Pak Hy-Oils Limited is ISO 9001 certified and tests each production batch to ensure quality.
Ferro Industrial Products manufactures various industrial coatings and supplies them globally. It has a long history starting in 1919 and has expanded its product range and geographic reach over the decades. Ferro provides powder coatings, pre-treatment chemicals, and technical support to customers in various industries including automotive, metal finishing, construction, and more.
Started in 1984, Polytek® Development Corp. is a leading manufacturer of specialty polymers including
polyurethane elastomers and casting resins, silicone, latex, plastisol, thermoplastic elastomers, and epoxies.
These systems are used primarily in mold making and casting applications in industrial, construction,
entertainment, fine arts and technology sectors.
Hebei Shida Seal Group is an IATF 16949 certified manufacturer of automotive sealing systems, body and glass weather-strips, rubber extrusions, extruded rubber profiles, trim seals, mouldings, gaskets and moulded rubber products from Hebei, China.
Tooling Capabilities: Designs and manufactures rubber & plastic extrusion dies, moulds and checking aids and fixtures.
Mixing Capabilities: Custom rubber mixing and formulating including compound development, internal mixing and open mill mixing of black or coloured compounds (strips, slabs, calendared and extrusions).
Extruding Capabilities: Offers extrusions capabilities for rubber extrusion, thermoplastic extrusion, and silicone extrusion.
Moulding Capabilities: Offers rubber compression moulding, rubber injection moulding, plastic injection moulding, silicone compression moulding services.
Finishing Capabilities: Offers taping, cutting, coating, printing, drilling, splicing, notching, punching, flocking, injection moulding services (in-line processes and off-line processes).
Keywords: Edge protectors, Glazing Profiles, Glass Run Channels, Edging Profile, Door sealing Profile, Sealing Profile soft rubber, Mono Profile, Finger guard Profile, Sponge rubber Profile, Special Profile, Injection Moulding, Corner Radius, Draw-cords, Hooks, Clips, Thermoplastic profiles, Edge protectors (automotive), Automotive Trim Seal Push in Bulb Seals Push On Edge Seal Push on Weatherstrip Push in Vinyl Trim Push on Vinyl Edge Trim Trim Seals Push on Edging Push On Edge Trim Rubber Seals Rubber Trim Seals Push On Trim Seal Trim Seals, Automotive Rubber Trim Seals , secondary door seals, vehicle body mounted seals rubber weather-strips, co-extruded trim seals bulb trim seals push-on trim seals edge protection sealing profiles edge protectors and sealing profiles edging profiles clip on sealing profiles, self-gripping profile with sponge rubber,metal clamping rubber profiles, reinforced rubber profiles with steel carriers self-gripping gaskets.
This document provides information on products from KCT Co., Ltd. and its subsidiaries, including solvent-based rubber marking paint and mandrel release agent. The marking paint is for identifying green rubber surfaces and offers various colors. The release agent is silicone-free and suitable for peroxide-cured EPDM rubber. Both products are customized to meet customer needs and have properties like fast drying times and chemical stability at high temperatures. The document also lists distributors in countries like Thailand.
Comparative Study on Compressive Strength of Self Cured Concrete and Normally...IRJET Journal
This study compared the compressive strength of self-cured concrete to normally cured concrete. Paraffin wax was used as a self-curing agent at dosages ranging from 0.2% to 1% by weight of cement. Concrete mixes of M20, M25, M30 and M40 grade were tested. Results found that concrete cured with paraffin wax achieved similar compressive strengths as concrete cured through immersion, with strengths reaching up to 99% of normally cured concrete. Using paraffin wax as a self-curing agent can help reduce water evaporation and provide adequate curing without needing extensive water sources, especially in construction sites with limited water access.
Hebei Shida Seal Group is a manufacturer of Trim Seals / Gaskets / Weatherstrips from China.
Our products include: Plastic Extrusions
PVC Plastic Edge Trim
Rubber Edge Trim
Rubber Extrusions
Co-extruded Trim Seal
Bulb Trim Seal
Push-on Trim Seal
Rubber Edge Trim Seal
EPDM Sponge Rubber Seal
D-shaped Rubber Seal
P-shaped Rubber Seal
Ribbed style Rubber Seal
Rubber and Plastic Profiles
Sponge Rubber Profiles
Edge Protectors
Edge Trims, Rubber + PVC
Trim Seals, Co-Extruded Profiles
Gasket Sealing Profiles
Rubber Edge Sealing
Self-clamping Gasketing
Edge Protection Profiles
Edge Protection Sealing Profiles
Self-gripping Sealing Profiles
Clip-on Sealing Profiles EPDM
Rubber extrusions can be spliced and vulcanized to form an endless variety of shapes. Our extensive splicing capabilities allow us to produce seals and gaskets for a broad array of aerospace, automotive, chemical processing, construction, food processing, industrial, oil and gas, as well as wire and cable applications.
We have the capability to splice / joint rubber extrusions for applications that require a continuous seal – solid rubber extrusions, sponge rubber extrusions, co-extruded trim seals. When designing a spliced seal, the key consideration is the physical integrity of the joint.
Our capabilities support cold and hot splicing as well as transfer and molded splicing.
Cold Splicing
Simply a matter of gluing two or more pieces of a seal together using quick-setting glue such as cyano-acrylate or super glue. Cold splicing is generally less expensive, depending on the design of the seal and the complexity of the cross section.
Hot Splicing
Considered to be the industry standard and most desirable when cosmetics are a concern. The glue used in hot splicing is rubber-based and has to be cured, or vulcanized, in place. This creates a splice that has reasonable strength, retains properties of the seal, and is inconspicous.
Injection Splicing
Works similar to injection molding. A mold is created so that two or more pieces of a seal can be inserted into the tooling. A polymer is then injected or transferred into the mold cavity, adhering the ends of the seal and creating a continuous seal or multi-sided gasket. The process allows for much greater detail work on the seal, producing a splice that is aesthetically pleasing.
1. The document provides information about RustX, a manufacturer of vapor corrosion inhibition (VCI) films and packaging solutions. It discusses RustX's history, facilities, customers, and technical leadership team.
2. RustX produces multi-layer co-extruded VCI films using patented SMP VCI technology to provide corrosion protection for up to 5 years. Their co-extrusion process results in films with better moisture and oxygen barrier properties compared to single layer films.
3. The document proposes RustX's power stretch film as a solution for aluminum mills, noting its high adhesive strength, corrosion prevention properties, and ability to form an excellent cocoon around coils to prevent moisture penetration for
PVC volume cost, How to use Fillers judicouslySiddhartha Roy
Siddhartha Roy explains to concept of Volume Cost with respect to PVC Pipes and cautions against too much filler loading. Many PVC pipe firms have collapsed because the implications of Volume costs were not understood,
This technical data sheet summarizes the properties and use of SPUR+ 1015LM, a silylated polyurethane resin for manufacturing one-part, moisture-curing sealants and adhesives. Key features include broad formulation latitude, excellent adhesion without primers, good durability indoors and outdoors, and high elastic recovery. Typical applications include building and construction sealants requiring good elastic recovery. The document provides details on the prepolymer's characteristics, recommended formulations, and test results demonstrating properties like adhesion and mechanical performance.
Calco Polychem is a company established in 1999 that manufactures a comprehensive range of masterbatches and fillers. It has expanded from a single production line to six lines with an annual capacity of over 8,000MT. The company prides itself on a blend of experienced and young professionals, as well as an in-house R&D team that provides customized solutions. Calco Polychem produces a variety of masterbatch products, including white, black, colored, and additive masterbatches, to serve customers across various industries.
Ramsay are a UK leading gasket manufacturer. Supplying custom die-cut gaskets, foam tapes and thermoformed parts in technical lightweight materials. For sealing, NVH, thermal and acoustic applications to OEMs across industry and the world.
Our objective is to provide our customers with quality products in accordance with TS16949, ISO14001 and ISO9001 standards, to deliver a guaranteed service. With over 50 years of material, process and application knowledge, combined with a cost and time effective solution based approach, we have ensured that we remain at the fore-front of our industry.
For more information please feel free to read our company e-brochure.
This document discusses Covestro AG's aqueous dispersions product line. It provides an overview of Covestro's mission to invent solutions for customers' needs through a curious and courageous corporate culture. It highlights Covestro's extensive portfolio of aqueous dispersions for coatings and adhesives, including polyurethane, polyacrylate, and polyester dispersions. The dispersions offer eco-friendly and efficient formulation options for various applications like wood coatings, automotive, and more. Covestro aims to enhance customers' process efficiency and provide outstanding quality and global supply security.
The document discusses various polyester and polyether polyol products from Covestro that can be used in polyurethane formulations. It provides tables listing specific Desmophen and Baycoll-branded products, including their viscosity, OH content, glass transition temperature, and brief comments on their applications and characteristics. The document emphasizes Covestro's long experience in polyurethane chemistry and their focus on developing sustainable and efficient polyol solutions to meet customer needs.
This document describes Plastifloor®, a German-made resinous flooring system. Plastifloor® products are based on methyl methacrylate (MMA) resins developed since 1995. The system includes primers, base coats, sealers, and topcoats that are customized for different industrial and commercial applications. Plastifloor® floors have proven durable in tough conditions due to their rapid curing, hygienic and mechanical properties, and German engineering quality. The flooring systems are used worldwide in industrial, commercial, and institutional settings.
Plastifloor produces MMA and PUMMA resin flooring systems in Germany. The resins were developed in 1995 and have proven effective in tough industrial and commercial conditions due to their fast curing, hygienic, and durable properties. Plastifloor offers a variety of resin products for primers, base coats, sealers, and topcoats that are customized for different substrate types and performance requirements.
This document provides an overview of Pidilite Industries Ltd's adhesive product range for various industries. It discusses their FV Adhesive-II range which covers products for upholstery, flooring, footwear, and HVAC applications. It then summarizes specific adhesive products for upholstery, flooring, wallpaper, footwear, and insulation applications. For each segment, it highlights the available packaging and key features and benefits of flagship products.
This document summarizes the history and operations of Termopol Polimer Sanayi ve Ticaret A.Ş., a Turkish manufacturer of thermoplastic elastomers (TPEs). Key milestones in the company's growth include becoming a Kraton Polymers distributor in 2001, starting TPE production in 2006, and expanding production capacity to 10,000 tons per year. The company serves customers in extrusion applications and exports 65% of its sales. It has ISO 9001 certification and FDA approval for some product lines.
Covestro is the world's leading manufacturer of aliphatic and aromatic polyisocyanates and offers an extensive range of innovative products and solutions for the coatings and adhesives industries. Covestro aims to help customers turn challenges like increasing quality demands and sustainability expectations into competitive advantages through innovation. Covestro has over 80 years of experience innovating polyisocyanate products and developing solutions that enhance process efficiency while reducing waste and emissions to contribute to sustainability.
Blast It Clean It Paint It Pty Ltd is an Australian company established in 1994 that specializes in sodium bicarbonate blasting and polyurea coatings. They provide industrial cleaning, blasting, painting and coating services to a wide range of industries. Their aim is to provide high quality and reliable services on schedule and budget. Notable past projects include blasting and painting a Russian submarine at sea. They were also pioneers in introducing sodium bicarbonate blasting technology to Australia. The company has since expanded into polyurea coatings and provides services such as bridge lining and waterproofing.
PROPOSAL FOR HY GRIP WATERPROOFING MEMBRANE FOR NISHAT JSC WORKINGMuhammad Nabeel Alvi
This document provides information about joint sealing compound waterproofing treatments from Pak Hy-Oils Limited. It includes:
1. An overview of Pak Hy-Oils Limited, which produces joint sealing compounds and other waterproofing and asphalt products.
2. Details on the multi-layer installation process for the joint sealing compound waterproofing system.
3. Highlights of the benefits of the joint sealing compound system, such as flexibility and excellent water resistance.
4. Confirmation that Pak Hy-Oils Limited is ISO 9001 certified and tests each production batch to ensure quality.
Ferro Industrial Products manufactures various industrial coatings and supplies them globally. It has a long history starting in 1919 and has expanded its product range and geographic reach over the decades. Ferro provides powder coatings, pre-treatment chemicals, and technical support to customers in various industries including automotive, metal finishing, construction, and more.
At Polyscope Polymers, we offer innovative solutions for customers in the specialty chemicals and technical plastics industries. Headquartered in the Netherlands, with sales offices in Singapore, Shanghai (China), and Exton (US), we guarantee a worldwide service to customers in the electronics, coating, packaging, optical displays, automotive, and healthcare markets.
Our mission is to support companies in developing successful solutions for tomorrow's needs, today. We do this by developing new business models and building strong partnerships across the value chain. As a young, entrepreneurial company, sustainability and environmental awareness are our top priority. We strive to grow in a safe, trustworthy, empowering, and socially responsible way.
Reliable Corporation reputed manufacturers since 45 years in southern part of India. We manufacture Water based Polymer Emulsions, Latex, Adhesives, Resins, Binders and Speciality Chemicals for Paper, Paper converting industry, Textiles, Paints etc,
Corporate Description: As the leading company in Polymer Chemistry sector in Taiwan and China, Truetime Industrial Corporation is Manufacturer, Developer and Trader organization. Established in 1992, Truetime Industrial Corporation (TTC) is an ISO 9001 certified leading producer of Modified Epoxy Resin and Epoxy Curing Agents (Hardener), additionally Customized Special Chemicals. Truetime Industrial Corporation is based in China and Headquarter in Taiwan. Its experienced with professional team, strong financial structure, qualified workforce, and reliable business partners.
BOSTIK - Adhesive Solutions for Flexible Packaging-Presentation version.pdfSHRIPAD AMATE
The document summarizes Bostik's adhesive solutions for flexible packaging. It discusses key trends in flexible packaging like convenience, small portions, and reclosability. It then outlines Bostik's portfolio of adhesives that address these trends, including reclosable seals, heat seals, cold seals, and lamination adhesives. It presents new product innovations in these areas and emphasizes Bostik's commitment to sustainability and circular economy goals through membership in the CEFLEX initiative.
The document discusses new hybrid sealants and adhesives for construction applications that are based on low viscosity trimethoxy silane terminated polyether polymers. These polymers provide benefits of both silicone and polyurethane technologies, making flexible, adhesive sealants that cure without bubbles and have improved UV resistance compared to older products. The sealants and adhesives can bond various substrates like stone and wood, fill joints clearly, and allow for movement in buildings while resisting chemicals and staining.
This document summarizes Perstorp's investments in new plasticizers. Perstorp is making its largest investment in history to produce two new plasticizers, EmolteneTM 100 and PevalenTM. EmolteneTM 100 is an established C10 plasticizer that provides durability for applications like cables and films. PevalenTM is an innovative polyolester plasticizer that is highly efficient while having low volatility, ensuring consistent properties. The new production capacity of 150,000 MT per year will strengthen Perstorp's platform and allow them to offer competitive and sustainable plasticizer products.
Semelhante a Plasti Chemie presentation 2022 ENG (20)
Plastifloor 800 PD is a waterproofing and protection system for concrete park decks. It consists of a primer, waterproofing membrane, drivable base coat, and colored sealer. The system offers high performance including crack bridging, chemical resistance, fast curing, and durability. It is suitable for new construction and refurbishment of damaged deck coatings. The system is applied to the prepared concrete in multiple layers that are troweled, rolled, and sealed to create a waterproof and slip resistant surface.
Plastifloor PUMMA resins are hybrid resins from MMA and PU. They are used for bridge deck repairs and overlays as well for waterproofing coatings on steel or concrete bridges. Plastifloor resins are approved by TÜV SÜD.
Fallstudie Plastifloor Boden in einem REWE Markt in LaufPlasti-Chemie GmbH
Plastifloor Harze können hervorragend für die Sanierung von Lebensmittelabteilungen in Kaufhallen eingesetzt werden, da diese Reaktionsharze schnell aushärten und der neue Boden bereits 2 h nach der Versiegelung wieder voll belastbar ist.
Plastifloor Boden als Fallstudie in der FeinkostherstellungPlasti-Chemie GmbH
Plastifloor Böden sind eine ideale Lösung für die Sanierung von Böden in der Feinkostherstellung. Der neue Plastifloor Boden kann über das Wochenende eingebaut werden und ist bereits 2 h nach der Versiegelung wieder voll belastbar.
Plastifloor Systemdatenblatt Einstreubelag 418 mit Membrane, R11.pdfPlasti-Chemie GmbH
Wie baue ich einen Plastifloor Einstreubelag R 11 aus? Plastifloor Harze sind schnell härtende Metacrylatharze und werden in vielen Industriezweigen verwendet. Plastifloor ist made in Germany.
Plastifloor Systemdatenblatt Kellenbelag mit Membrane, R10.pdfPlasti-Chemie GmbH
Wie wird ein Plastifloor Kellenbekag mit Rutschfestigkeitsklasse R10 aufgebaut? Plastifloor harze sind schnell härtende Metacrylatharze, hergestellt von Plasti Chemie in Deutschland.
Plasti-Chemie produces Plastifloor and Plastipur resin coatings for industrial and commercial flooring applications. Their resins cure quickly, within 1-2 hours for Plastifloor and 6-7 hours for Plastipur. The company has production facilities in Germany and the US, shipping resins worldwide in drums, pails, and other containers. Plastifloor resins are methacrylate-based and offer high chemical resistance for applications such as parking decks, ship decks, and more. Installation involves surface preparation, application of primers and mortars, then coatings and sealers. Plasti-Chemie offers training and technical support for applicators.
The hotel resort La Samanna in St. Martin needed to reconstruct the walk-in cooler flooring. The old tile flooring was difficult to clean and maintain and did not provide chemical or mechanical protection. It was replaced with Plastifloor, an seamless elastic epoxy resin flooring system, in a short timeframe over a weekend to minimize business disruption. The new flooring provides hygienic, slip-resistant, and easy to clean and maintain flooring suitable for the food service environment.
The document describes the reconstruction of a private pool in South Africa using Plastifloor® MMA resin coatings. The old cracked concrete pool was prepared by grinding, priming, and filling cracks. Then a flexible Plastifloor® 332 membrane and Plastifloor® 418 resin coating were applied which could be used just 2 hours later. The Plastifloor® system provides a seamless, waterproof, slip resistant, and easily cleanable surface suitable for pools.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Null Bangalore | Pentesters Approach to AWS IAMDivyanshu
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECTjpsjournal1
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
2. Welcome
2
Volkmar Lull, General Manager
Plasti Chemie GmbH founded in 1995
What are Plastifloor resins?
What are Plastipur and Plastistone resins?
Products Overview, New Products
How to install?
References and Projects
3. Volkmar Lull
54 years old, active in the
coating industry since 1991
Started his business in 1991 with
RPM
Since 1995 GM of Plasti-Chemie
GmbH
More than 30 years experience
in the MMA resin business
3
4. Plasti-
Chemie
GmbH
4
Start of production in 1995
Annual production volume: 4000 tons
Owned by Knorr Venture Capital Group Inc., a
US Holding Company
Production of roof, wall & floor coatings
90% MMA and PUMMA, 10% Epoxy, Polyaspartic
and Bitumen
80% export to Europe, Asia, Middle East, Africa,
South America and USA, Canada and Australia
9. Our Factory 9
Resins are available in:
180 kg(47,5 gal) drums
25kg and 10 kg pails
Sand in 25 kg bags
Hardener in 25 kg boxes
Fleece in 105 m2 rolls
10. Our Factory 10
Resins are available
in:
180 kg(47,5 gal)
drums
25kg and 10 kg pails
Sand in 25 kg bags
Hardener in 25 kg
boxes
Fleece in 105 m2 rolls
11. Our Factory 11
Resins are available
in:
180 kg(47,5 gal)
drums
25kg and 10 kg pails
Sand/filler in 25 kg
bags
Hardener in 25 kg
boxes
Fleece in 105 m2 rolls
16. Our
Laboratory
16
Before we fill the
resins in the drums
we testing the
properties:
reactivity time
Viscosity
Flowing size
Adhesion to the
substrate
flexural strength
elongation
22. What are Plastifloor
resins?
Plastifloor resins are not as new as
one might think. Since more than
70 years they are used throughout
the world as industrial coating
applications. But what exactly are
they?
They are not Epoxy resins.
They are not Polyester resins.
They are not Polyurethane
resins.
22
23. What are
Plastifloor
resins?
23
There are several unique features which
distinguish Plasti-Chemie’s Plastifloor resins from
the previously mentioned common coating
materials
What makes Plastifloor resins so unique?
Plastifloor resins are Methylacrylate resins
(MMA) they are curing by radical
Polymerisation.
24. Technical
Advantages
24
Fastest Curing Time: 1-2 hours
High Quality Performance below -30°C, up to +70 °C
sprayable versions available
High Chemical Resistance
Skid Proof and Easy to Clean Coatings
Low in viscosity resin allows application with trowel-on or roll-on
equipment
Resins are available from flexible to very hard
Installation of plain, colored, decorative, smooth or textured surfaces,
they are highly resilient, hygienic, chemical and wear resistant
25. That’s why
the resins
are
applicable
everywhere
25
Public:
Parking Decks, cycle ways, lining, waterproofing
Bridges and Ship Decks, tunnels
Private :
Factory Halls, warehouse
Offices, laboratories
Garages, Ramps
Swimming Pools inside and around
Terraces, Stairs and Balconies
Plastifloor resins are certified for all industries
resins used outside and for inside applications.
26. Product Installation Overview
All Plastifloor systems are designed to meet the requirements of
the customer in following steps:
26
Floor Preparation
•Grinding, Blasting
Primer
•Plastifloor Primers are aplicable to any types of substrates
Mortar*
•Fills leaks, defects and holes of the substrate
Coating
•Chemically resistant, highly elastic features
Sealer
•Top Coat protecting layer with special features
• Using Plastifloor Additives improves the performance of the top coat
27. What are
Plastipur resins?
27
Plastipur resins are
based on Polyaspartic
acids
They are not Epoxy
resins.
They are not Polyester
resins.
They are not
Polyurethane resins.
The resins are clear, not
smelling and curing within
6-7 hours
28. Applications: 28
Plastipur resins are
perfect to use as a
chemical resistant,
clear sealer on top
of Plastifloor
broadcasted
coatings.
29. Applications: 29
Plastipur resins are
perfect to use as a
chemical resistant,
clear sealer on top
of Plastifloor
broadcasted
coatings.
30. What are Plastistone
resins?
30
Plastistone resins are based
on Epoxy resins.
They are not Acrylic resins.
They are not Polyester resins.
They are not Polyurethane
resins.
The resins are available clear,
colored and not smelling and
curing within 12-16 hours
31. Applications: 31
Plastistone resins
are perfect to use
as a mechanical
resistant, self
levelling floor
coating when time
is not an issue.
39. The Plastifloor
Solution:
39
The Plastifloor resin family
enables you to fix all of these
problems.
Thanks to the unique resin
formulation, Plastifloor resins
will allow you to cover cracks,
fill joints, achieve better
bonding properties to the
substrate than other flooring
systems
Levelling uneven substrates
quick and easy
Install waterproofing
membranes by airless sprayer
on bridges, tunnels, roofs
71. Plastifloor is
easy to install
for trained
applicators
71
We offer in-house training for
applicators
Site trainings for applicators
Technical support on-site
Business support and consulting
In-house trainings for sales people
Product meetings in hotels and
meeting locations
114. Summary
11
4
Plastifloor is the right
resin system for many
kinds of applications in
various branches and
industries
Plasti-Chemie is an
experienced producer
with internationally
available technical
support
115. Thank You !
11
5
Additional info
available at:
www.plastifloor.net
www.plasti-chemie.de
www.plastishop.de
www.plasti-chemie-
america.com