Intermediate: Bandwidth Parts (BWP)
•
2 gostaram•16,644 visualizações
A short introductory presentation/video explaining Bandwidth Parts in 5G and why are they needed. There are two main reasons: 1. Cheaper devices may not want to support the large bandwidth in 5G, that can go up to 400 MHz for FR2 and 100 MHz for FR1 2. A device does not need to monitor the whole of bandwidth for power consumption reduction reasons, here BWP can help too
Denunciar
Compartilhar
Denunciar
Compartilhar
Baixar para ler offline
Recomendados
5G_NR_Overview_Architecture_and_Operating_Modes
5G/NR wireless communication technology overview, architecture and its operating modes SA and NSA. Also an introduction to VoNR and other services overview of 5G network.
The key technologies of 5G namely MIMO and Network slicing are also explained.
5g-Air-Interface-pptx.pptx
The document discusses 5G new radio (NR) physical layer resources including numerology, time-domain resources, frequency-domain resources, and space-domain resources. It provides details on key 5G NR concepts such as subcarrier spacing, symbols, slots and frames. Cyclic prefix length is determined based on subcarrier spacing to maintain consistent overhead. Slot formats in 5G NR provide more flexibility with symbol level uplink/downlink switching compared to LTE.
5G technical_overview_training_sec_1
5G NR Technical Overview Presentation
Covers the 5G cellular network overview and Technical details
5G massive mimo & planning.pdf
The document discusses 5G massive MIMO and network planning. It describes how massive MIMO uses beamforming techniques like using multiple antennas to direct signals in specific directions, improving coverage and capacity. It outlines the evolution from MIMO to massive MIMO and details concepts like beam management and optimization that are important for 5G network planning and coverage scenarios.
5G Huawei BTS5900
Digital transformation is at a critical juncture, with a diverse range of industries making changes that signifi-
cantly transform the way people live and work. These shifts have been driving advancements in the financial,
transportation, manufacturing, governmental, and many more sectors. Innovative mobile broadband technologies,
an underlying infrastructure, are a key driving force behind the digitalization of all walks of life. With
the rapid development of 5G, an increasing number of new applications and business models will reshape
the social and economic formation.
Such changes will stimulate strategic planning regarding industry opportunities, technical evolution,
network architecture, and other areas. Telecom operators are growing increasingly concerned with the
creation of a new target network to maximize return on investment (ROI) and achieve business success while
maintaining a competitive edge for the future. Global operators are promoting early deployment of 5G and
innovative business models through continuous 4G evolution. This has led to today's business achievements
and has laid a solid foundation for the huge potential of 5G.
With a gradual consensus being formed for the entire industry, all related players in the industry chain will
develop close collaboration to embrace a brighter future for the wireless network industry.
Continuous 4G evolution, a road to 5G!
Huawei BTS 3900 Hardware Structure
The document describes the hardware structure and components of the Huawei BTS3900 base station system. The key points are:
- The BTS3900 system consists of the BBU3900 baseband processing unit, MRFU radio frequency unit, and indoor macro cabinet.
- The BBU3900 performs baseband signal processing and manages the system. It includes boards like the GTMU, WMPT, WBBP, UTRP, UPEU, and others.
- The MRFU contains the radio frequency components and connects to the BBU3900 via CPRI.
- The system supports GSM, UMTS and dual-mode operation with high capacity
Beginners: 5G Terminology
AN UPDATED VERSION OF THIS IS AVAILABLE HERE: https://www.slideshare.net/3G4GLtd/beginners-5g-terminology-updated-feb-2019
A short video looking at 5G terminology that is being used in standards and specifications.
Introduction to 5G NR
This document provides an introduction to 5G technology, including:
- 5G aims to meet growing connectivity needs and fulfill diverse use cases such as drones, augmented reality, and the Internet of Things.
- 5G standards are being developed by 3GPP and ITU, with 3GPP specifying the radio technology beyond LTE known as New Radio (NR).
- 5G requirements defined by 3GPP include high peak data rates, low latency, high reliability, large connection densities, and support for high mobility.
Recomendados
5G_NR_Overview_Architecture_and_Operating_Modes
5G/NR wireless communication technology overview, architecture and its operating modes SA and NSA. Also an introduction to VoNR and other services overview of 5G network.
The key technologies of 5G namely MIMO and Network slicing are also explained.
5g-Air-Interface-pptx.pptx
The document discusses 5G new radio (NR) physical layer resources including numerology, time-domain resources, frequency-domain resources, and space-domain resources. It provides details on key 5G NR concepts such as subcarrier spacing, symbols, slots and frames. Cyclic prefix length is determined based on subcarrier spacing to maintain consistent overhead. Slot formats in 5G NR provide more flexibility with symbol level uplink/downlink switching compared to LTE.
5G technical_overview_training_sec_1
5G NR Technical Overview Presentation
Covers the 5G cellular network overview and Technical details
5G massive mimo & planning.pdf
The document discusses 5G massive MIMO and network planning. It describes how massive MIMO uses beamforming techniques like using multiple antennas to direct signals in specific directions, improving coverage and capacity. It outlines the evolution from MIMO to massive MIMO and details concepts like beam management and optimization that are important for 5G network planning and coverage scenarios.
5G Huawei BTS5900
Digital transformation is at a critical juncture, with a diverse range of industries making changes that signifi-
cantly transform the way people live and work. These shifts have been driving advancements in the financial,
transportation, manufacturing, governmental, and many more sectors. Innovative mobile broadband technologies,
an underlying infrastructure, are a key driving force behind the digitalization of all walks of life. With
the rapid development of 5G, an increasing number of new applications and business models will reshape
the social and economic formation.
Such changes will stimulate strategic planning regarding industry opportunities, technical evolution,
network architecture, and other areas. Telecom operators are growing increasingly concerned with the
creation of a new target network to maximize return on investment (ROI) and achieve business success while
maintaining a competitive edge for the future. Global operators are promoting early deployment of 5G and
innovative business models through continuous 4G evolution. This has led to today's business achievements
and has laid a solid foundation for the huge potential of 5G.
With a gradual consensus being formed for the entire industry, all related players in the industry chain will
develop close collaboration to embrace a brighter future for the wireless network industry.
Continuous 4G evolution, a road to 5G!
Huawei BTS 3900 Hardware Structure
The document describes the hardware structure and components of the Huawei BTS3900 base station system. The key points are:
- The BTS3900 system consists of the BBU3900 baseband processing unit, MRFU radio frequency unit, and indoor macro cabinet.
- The BBU3900 performs baseband signal processing and manages the system. It includes boards like the GTMU, WMPT, WBBP, UTRP, UPEU, and others.
- The MRFU contains the radio frequency components and connects to the BBU3900 via CPRI.
- The system supports GSM, UMTS and dual-mode operation with high capacity
Beginners: 5G Terminology
AN UPDATED VERSION OF THIS IS AVAILABLE HERE: https://www.slideshare.net/3G4GLtd/beginners-5g-terminology-updated-feb-2019
A short video looking at 5G terminology that is being used in standards and specifications.
Introduction to 5G NR
This document provides an introduction to 5G technology, including:
- 5G aims to meet growing connectivity needs and fulfill diverse use cases such as drones, augmented reality, and the Internet of Things.
- 5G standards are being developed by 3GPP and ITU, with 3GPP specifying the radio technology beyond LTE known as New Radio (NR).
- 5G requirements defined by 3GPP include high peak data rates, low latency, high reliability, large connection densities, and support for high mobility.
4G LTE full tutorial
This tutorial has been designed for audiences with a need to understand the LTE technology basics in very simple terms. This tutorial will give you enough understanding on LTE technology from where you can take yourself at higher level of expertise.
5G Standards: 3GPP Release 15, 16, and beyond
Presented by Sasha Sirotkin, Vice Chairman of 3GPP RAN3 at Wireless Russia, May 2019
*** Shared with Permission ***
E nodeb commissioning guide(v100r005c00 04)(pdf)-en
This document provides instructions for commissioning an eNodeB using different commissioning modes, including remote commissioning via an M2000 management system and local commissioning directly on the eNodeB or via a USB flash drive. It describes the commissioning procedures and preparation steps for various scenarios depending on whether a security gateway is deployed. The document contains details on tasks such as downloading software, configuring the antenna system, testing basic services, and setting the eNodeB to normal operating mode after commissioning completion.
LTE Call Processing and Handover
•CPS (Call Processing Software): LTE Control & Bearer Protocol processing
•OAM (Operation and Maintenance): eNB Operation and Maintenance
•MW (Middleware): IPC and Redundancy function
•IPRS (IP Routing Software): Routing protocol operation
•NP SW (Network Processor Software): Packet forwarding function
•OS (Operating System): Embedded Linux
•DD (Device Driver): initializing and setting the devices
Ericsson RBS RET Alarms Troubleshooting Guide Flow Chart v2
Flow Chart describes RET Alarms Troubleshooting in Ericsson 3G RBS 6601....
* StandardizedRetLicenseNotValid
* RetCascadingLicenseNotValid
* RetFailure
* RetPortCurrentTooHigh
* CommunicationLostWithRet
* RetProfileParameterError
* ElectricalAntennaTiltOutOfRange
* MissingRetProfile
Mobile Networks Overview (2G / 3G / 4G-LTE)
Mobile networks have evolved over several generations from 1G analog cellular to 4G LTE networks. This document provides an overview of the fundamental concepts and evolution of mobile networks including discussions of 2G, 3G, 4G networks and the Evolved Packet Core. It describes the core network functions and interfaces as well as basic network scenarios.
2G / 3G / 4G / IMS / 5G Overview with Focus on Core Network
The document provides an overview of mobile networks from 2G to 5G, with a focus on the core network. It describes the key network elements and protocols in 2G/3G networks such as BTS, BSC, NodeB, RNC, SGSN, GGSN. Example call flows and scenarios like location update and SMS are reviewed. GPRS network architecture is introduced including the functions of SGSN, GGSN, CG. Finally, it briefly introduces 5G services before concluding.
toaz.info-zte-fdd-lte-radio-network-optimization-guideline-v14-1-pr_2dc3a4737...
This document provides guidelines for optimizing LTE radio networks from ZTE. It discusses the optimization process including preparation, pre-launch optimization, soft launch optimization and post-launch optimization. It describes tools for optimization and the optimization of various network aspects like coverage, handover performance, downloading rates, access issues and call drops. Specific problems and their solutions are explained for each aspect. The document also discusses key performance indicators for network access, handover and call drops.
Ericsson 5G learning portfolio 2018
This document provides details on Ericsson's 5G training program for 2018, including an overview of course topics, learning levels, and individual course descriptions. The training program covers 5G fundamentals, core network topics like 5G EPC and virtualization, RAN topics like massive MIMO and beamforming, transport, and management/orchestration. Course durations range from video sessions to 5-day classroom instruction, and include both virtual and in-person learning options. Contact information is provided to learn more about Ericsson's training portfolio.
Deep Dive 5G NR-RAN Release 2018 Q4.pptx
This document provides an overview of Ericsson's 5G NR-RAN Release for the fourth quarter of 2018. It describes the NR non-standalone architecture, including dual connectivity functionality and interfaces. It also covers topics like numerology, frame structure, deployment scenarios for mid-band and high-band spectrum, and transport functionality between the gNodeB and eNodeB.
Lte capacity monitoring
The document discusses various resources in an LTE network that need to be monitored to ensure capacity and quality of service. It describes several key performance indicators (KPIs) related to resources like connected users, traffic volume, paging messages, processor usage, and provides thresholds and solutions to address issues.
Lte technical overview
LTE Release 10, also known as LTE-Advanced, provides significant enhancements over LTE Release 8 including support for wider bandwidths up to 100MHz using carrier aggregation, advanced MIMO techniques up to 8-layer transmission, heterogeneous networks and interference coordination, and relaying to improve coverage and throughput. It aims to fulfill the requirements for ITU's IMT-Advanced specification.
Physical layer of 5 g
The physical layer of 5G will differ significantly from 4G LTE in several ways to improve spectral efficiency and data rates. It will utilize a much larger number of active antennas and antenna arrays to support beamforming and millimeter wave signals. New modulation and coding schemes, components for power amplification and noise reduction, and channel models need to be developed. The 5G physical layer protocol stack separates the layer into PHY, MAC, RLC, PDCP and SDAP layers to handle functions like error correction, scheduling, security, and QoS flow mapping between layers.
5G NR parameters
This document specifies 5G RRC parameters including message definitions and information elements for timers, counters, constants, and UE variables. It defines RRC messages that may be sent on different logical channels and provides descriptions of message fields. It also specifies bandwidth part configurations, measurement reporting, reconfiguration messages, and beam failure recovery resources.
5G evolution 3gpp R6 R17-final
The document discusses the evolution of 3GPP's LTE and 5G NR technologies. It provides background on 3GPP and describes their release timeline and process. Key points include:
- 3GPP is working on LTE and NR enhancements in Release 16 through 2021.
- Release 16 focuses on expanding 5G NR capabilities and use cases.
- Future releases will continue evolving the technologies towards meeting more demanding requirements like ultra-low latency communications.
Designing 5G NR (New Radio)
What is 5G NR all about? Check out this presentation to see all the key design components of this new unifying air interface for the next decade and beyond.
What is 5G?
Technology Manager Andreas Roessler covers 5G basics in this keynote presentation at the RF Lumination 2019 conference in February 2019.
RF Lumination 2019
"Meet 158+ years of RF design & test expertise at one event. If they can't answer your question, it must be a really good question!"
Watch all the presentations here:
https://www.rohde-schwarz-usa.com/RFLuminationContent.html
Andreas Roessler is the Rohde & Schwarz Technology Manager focused on UMTS Long Term Evolution (LTE) and LTE-Advanced. With responsibility for the strategic marketing and product portfolio development for LTE/LTE-Advanced, Andreas follows the standardization process in 3GPP very closely, particularly on core specifications as well as protocol conformance, RRM and RF conformance specifications for device and base stations testing. He graduated from Otto-von-Guericke University in Magdeburg, Germany, and received a Master's Degree in communication engineering.
LTE quick introduction session Training
LTE is an IP-based broadband network technology developed by 3GPP as an evolution of 3G mobile networks. It provides higher data rates and an improved end-to-end solution for delivery of voice, data and multimedia to users. Key aspects of LTE include support for wider channel bandwidths up to 20MHz, OFDMA on the downlink and SC-FDMA on the uplink, peak data rates of 100Mbps downlink and 50Mbps uplink, and backward compatibility with 2G and 3G networks. LTE Advanced further enhances LTE through the use of carrier aggregation to bond multiple component carriers, support for higher order MIMO up to 8x8, and theoretical peak data rates
Lte kpi accessability
This document summarizes various LTE KPIs and performance metrics related to random access, RRC connection establishment, ERAB establishment, and issues that may impact them. It provides potential causes for high values or failures in these metrics as well as recommended actions to investigate like checking RF parameters, capacity, licenses, alarms, configuration, and optimizing physical antenna settings.
5G Network Architecture, Design and Optimisation
Presented by Prof. Andy Sutton, Principal Network Architect, Architecture & Strategy, TSO, BT at The IET '5G - State of Play' conference on 24th January 2018
*** SHARED WITH PERMISSION ***
Beginners: 5G Spectrum - Long Version
A presentation / video looking at 5G spectrum auctions and allocations and how different types of spectrum is required for providing a perfect 5G coverage
All our slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Basics0345gspectrumlong 190605151820
The document discusses 5G spectrum and frequency bands. It explains that 5G will utilize spectrum between 450 MHz to 52.6 GHz, divided into two frequency ranges: FR1 from 450 MHz to 7.125 GHz and FR2 from 24.25 GHz to 52.6 GHz. The most popular bands for 5G deployment include 700 MHz, 3.5 GHz, and 26/28 GHz. Mobile operators can refarm existing 4G bands like 600 MHz and 2.5 GHz for 5G use. A wide range of spectrum is needed to support the different use cases of 5G networks.
Mais conteúdo relacionado
Mais procurados
4G LTE full tutorial
This tutorial has been designed for audiences with a need to understand the LTE technology basics in very simple terms. This tutorial will give you enough understanding on LTE technology from where you can take yourself at higher level of expertise.
5G Standards: 3GPP Release 15, 16, and beyond
Presented by Sasha Sirotkin, Vice Chairman of 3GPP RAN3 at Wireless Russia, May 2019
*** Shared with Permission ***
E nodeb commissioning guide(v100r005c00 04)(pdf)-en
This document provides instructions for commissioning an eNodeB using different commissioning modes, including remote commissioning via an M2000 management system and local commissioning directly on the eNodeB or via a USB flash drive. It describes the commissioning procedures and preparation steps for various scenarios depending on whether a security gateway is deployed. The document contains details on tasks such as downloading software, configuring the antenna system, testing basic services, and setting the eNodeB to normal operating mode after commissioning completion.
LTE Call Processing and Handover
•CPS (Call Processing Software): LTE Control & Bearer Protocol processing
•OAM (Operation and Maintenance): eNB Operation and Maintenance
•MW (Middleware): IPC and Redundancy function
•IPRS (IP Routing Software): Routing protocol operation
•NP SW (Network Processor Software): Packet forwarding function
•OS (Operating System): Embedded Linux
•DD (Device Driver): initializing and setting the devices
Ericsson RBS RET Alarms Troubleshooting Guide Flow Chart v2
Flow Chart describes RET Alarms Troubleshooting in Ericsson 3G RBS 6601....
* StandardizedRetLicenseNotValid
* RetCascadingLicenseNotValid
* RetFailure
* RetPortCurrentTooHigh
* CommunicationLostWithRet
* RetProfileParameterError
* ElectricalAntennaTiltOutOfRange
* MissingRetProfile
Mobile Networks Overview (2G / 3G / 4G-LTE)
Mobile networks have evolved over several generations from 1G analog cellular to 4G LTE networks. This document provides an overview of the fundamental concepts and evolution of mobile networks including discussions of 2G, 3G, 4G networks and the Evolved Packet Core. It describes the core network functions and interfaces as well as basic network scenarios.
2G / 3G / 4G / IMS / 5G Overview with Focus on Core Network
The document provides an overview of mobile networks from 2G to 5G, with a focus on the core network. It describes the key network elements and protocols in 2G/3G networks such as BTS, BSC, NodeB, RNC, SGSN, GGSN. Example call flows and scenarios like location update and SMS are reviewed. GPRS network architecture is introduced including the functions of SGSN, GGSN, CG. Finally, it briefly introduces 5G services before concluding.
toaz.info-zte-fdd-lte-radio-network-optimization-guideline-v14-1-pr_2dc3a4737...
This document provides guidelines for optimizing LTE radio networks from ZTE. It discusses the optimization process including preparation, pre-launch optimization, soft launch optimization and post-launch optimization. It describes tools for optimization and the optimization of various network aspects like coverage, handover performance, downloading rates, access issues and call drops. Specific problems and their solutions are explained for each aspect. The document also discusses key performance indicators for network access, handover and call drops.
Ericsson 5G learning portfolio 2018
This document provides details on Ericsson's 5G training program for 2018, including an overview of course topics, learning levels, and individual course descriptions. The training program covers 5G fundamentals, core network topics like 5G EPC and virtualization, RAN topics like massive MIMO and beamforming, transport, and management/orchestration. Course durations range from video sessions to 5-day classroom instruction, and include both virtual and in-person learning options. Contact information is provided to learn more about Ericsson's training portfolio.
Deep Dive 5G NR-RAN Release 2018 Q4.pptx
This document provides an overview of Ericsson's 5G NR-RAN Release for the fourth quarter of 2018. It describes the NR non-standalone architecture, including dual connectivity functionality and interfaces. It also covers topics like numerology, frame structure, deployment scenarios for mid-band and high-band spectrum, and transport functionality between the gNodeB and eNodeB.
Lte capacity monitoring
The document discusses various resources in an LTE network that need to be monitored to ensure capacity and quality of service. It describes several key performance indicators (KPIs) related to resources like connected users, traffic volume, paging messages, processor usage, and provides thresholds and solutions to address issues.
Lte technical overview
LTE Release 10, also known as LTE-Advanced, provides significant enhancements over LTE Release 8 including support for wider bandwidths up to 100MHz using carrier aggregation, advanced MIMO techniques up to 8-layer transmission, heterogeneous networks and interference coordination, and relaying to improve coverage and throughput. It aims to fulfill the requirements for ITU's IMT-Advanced specification.
Physical layer of 5 g
The physical layer of 5G will differ significantly from 4G LTE in several ways to improve spectral efficiency and data rates. It will utilize a much larger number of active antennas and antenna arrays to support beamforming and millimeter wave signals. New modulation and coding schemes, components for power amplification and noise reduction, and channel models need to be developed. The 5G physical layer protocol stack separates the layer into PHY, MAC, RLC, PDCP and SDAP layers to handle functions like error correction, scheduling, security, and QoS flow mapping between layers.
5G NR parameters
This document specifies 5G RRC parameters including message definitions and information elements for timers, counters, constants, and UE variables. It defines RRC messages that may be sent on different logical channels and provides descriptions of message fields. It also specifies bandwidth part configurations, measurement reporting, reconfiguration messages, and beam failure recovery resources.
5G evolution 3gpp R6 R17-final
The document discusses the evolution of 3GPP's LTE and 5G NR technologies. It provides background on 3GPP and describes their release timeline and process. Key points include:
- 3GPP is working on LTE and NR enhancements in Release 16 through 2021.
- Release 16 focuses on expanding 5G NR capabilities and use cases.
- Future releases will continue evolving the technologies towards meeting more demanding requirements like ultra-low latency communications.
Designing 5G NR (New Radio)
What is 5G NR all about? Check out this presentation to see all the key design components of this new unifying air interface for the next decade and beyond.
What is 5G?
Technology Manager Andreas Roessler covers 5G basics in this keynote presentation at the RF Lumination 2019 conference in February 2019.
RF Lumination 2019
"Meet 158+ years of RF design & test expertise at one event. If they can't answer your question, it must be a really good question!"
Watch all the presentations here:
https://www.rohde-schwarz-usa.com/RFLuminationContent.html
Andreas Roessler is the Rohde & Schwarz Technology Manager focused on UMTS Long Term Evolution (LTE) and LTE-Advanced. With responsibility for the strategic marketing and product portfolio development for LTE/LTE-Advanced, Andreas follows the standardization process in 3GPP very closely, particularly on core specifications as well as protocol conformance, RRM and RF conformance specifications for device and base stations testing. He graduated from Otto-von-Guericke University in Magdeburg, Germany, and received a Master's Degree in communication engineering.
LTE quick introduction session Training
LTE is an IP-based broadband network technology developed by 3GPP as an evolution of 3G mobile networks. It provides higher data rates and an improved end-to-end solution for delivery of voice, data and multimedia to users. Key aspects of LTE include support for wider channel bandwidths up to 20MHz, OFDMA on the downlink and SC-FDMA on the uplink, peak data rates of 100Mbps downlink and 50Mbps uplink, and backward compatibility with 2G and 3G networks. LTE Advanced further enhances LTE through the use of carrier aggregation to bond multiple component carriers, support for higher order MIMO up to 8x8, and theoretical peak data rates
Lte kpi accessability
This document summarizes various LTE KPIs and performance metrics related to random access, RRC connection establishment, ERAB establishment, and issues that may impact them. It provides potential causes for high values or failures in these metrics as well as recommended actions to investigate like checking RF parameters, capacity, licenses, alarms, configuration, and optimizing physical antenna settings.
5G Network Architecture, Design and Optimisation
Presented by Prof. Andy Sutton, Principal Network Architect, Architecture & Strategy, TSO, BT at The IET '5G - State of Play' conference on 24th January 2018
*** SHARED WITH PERMISSION ***
Mais procurados (20)
E nodeb commissioning guide(v100r005c00 04)(pdf)-en
E nodeb commissioning guide(v100r005c00 04)(pdf)-en
Ericsson RBS RET Alarms Troubleshooting Guide Flow Chart v2
Ericsson RBS RET Alarms Troubleshooting Guide Flow Chart v2
2G / 3G / 4G / IMS / 5G Overview with Focus on Core Network
2G / 3G / 4G / IMS / 5G Overview with Focus on Core Network
toaz.info-zte-fdd-lte-radio-network-optimization-guideline-v14-1-pr_2dc3a4737...
toaz.info-zte-fdd-lte-radio-network-optimization-guideline-v14-1-pr_2dc3a4737...
Semelhante a Intermediate: Bandwidth Parts (BWP)
Beginners: 5G Spectrum - Long Version
A presentation / video looking at 5G spectrum auctions and allocations and how different types of spectrum is required for providing a perfect 5G coverage
All our slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Basics0345gspectrumlong 190605151820
The document discusses 5G spectrum and frequency bands. It explains that 5G will utilize spectrum between 450 MHz to 52.6 GHz, divided into two frequency ranges: FR1 from 450 MHz to 7.125 GHz and FR2 from 24.25 GHz to 52.6 GHz. The most popular bands for 5G deployment include 700 MHz, 3.5 GHz, and 26/28 GHz. Mobile operators can refarm existing 4G bands like 600 MHz and 2.5 GHz for 5G use. A wide range of spectrum is needed to support the different use cases of 5G networks.
Beginners: 5G Spectrum - Short Version
A presentation / video looking at 5G spectrum auctions and allocations and how different types of spectrum is required for providing a perfect 5G coverage
All our slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Mobile Network Sharing
A short presentation looking at different ways in which mobile cellular network sharing is done. Different options including MORAN (Multiple Operator Radio Access Network), MOCN (Multiple Operator Core Network) and GWCN (Gateway Core Network) are discussed.
Opinion: The Politics of SA vs NSA 5G & 4G Speeds
Zahid Ghadialy, Principal Analyst and Consultant discusses the operator dilemma of standalone (SA) vs non-standalone (NSA) 5G deployment, frequency refarming and why 4G speeds will start reducing once SA 5G starts to be deployed.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Technical Paper: 5G Standalone Architecture
1. The document discusses the various 5G non-standalone (NSA) and standalone (SA) architecture options defined by 3GPP, including their characteristics and differences. 2. The key NSA options are Option 3, 4, and 7 which rely on existing LTE networks, while Option 2 is the main SA option which uses only 5G NR and is connected to the 5G core. 3. SA Option 2 can fully support new 5G services like URLLC and network slicing, while NSA options have limited 5G capabilities due to dependencies on LTE core networks.
5G Demystified; the what, when and where
Presented virtually by Andy Sutton, Principal Network Architect, BT Technology on 06 Aug 2020.
Andy provides an update and review of the transformational plans, capabilities and outcomes from 5G deployments in the UK. 5G networks are already enabling a step change in the range and capability of innovative applications from IoT to robotics. That pace of change is due to accelerate as 5G moves from its initial enhanced mobile broadband phase to deliver ultra-reliable and low latency communications along with massive machine type connectivity.
*** SHARED WITH PERMISSION ***
5G NR Training, 5G New Radio (NR) Training Course, Wireless Training - Tonex ...
Length: 2 Days
5G NR Training is a 2-day technical course covering all parts of 5G New Radio (NR) air interface, conventions, activities and methodology. 5G NR is as yet developing despite the fact that specialist co-ops have started their of 5G networks in select U.S. urban areas as per the 3GPP's discharged 5G NR (new radio) rules.
New 5G remote technology is so unique in relation to its ancestors that a new interchanges standard must be created.
Members will find out about the genuine #5G networks and 5G NR, not really called "5G Evolution" networks which to a great extent comprise of the rebranding existing LTE advancements the same number of specialist organizations have effectively received.
Learning Objectives:
After finishing this course, participants will have the option to:
Understand the nuts and bolts of 5G NR (New Radio)
Rundown fundamental third Generation Partnership Project (3GPP) 5G New Radio (NR) highlights and abilities
Rundown the pertinent developments and advancements for 5G NR
Compare and Contrast Non-standalone 5G NR and Standalone 5G NR specifications
Rundown 5G NR air interface, conventions, tasks and techniques
Clarify the diverse sending situations for 5G NR
Depict the hidden innovations and conventions identified with 5G NR
Compare and contrast 3GPP and Verizon 5G TF (Verizon 5th Generation Radio Access)
Clarify the future technology and application drifts in 5G NR
Course Outline:
5G NR (New Radio)
Radio Access Architecture and Interfaces
5G NR: NG-RAN Architecture Description
5G NR Physical Layer General Description
5G NR Physical Layer Details
User Equipment (UE) Radio Transmission and Reception
5G NR L2 and L3 Protocols
User Equipment (UE) Conformance Specification
3GPP vs Verizon 5GTF
Workshop and Deep Dive Activities coverage
Physical Layer Procedures
5G NR Validation
Request more information regarding 5G NR Training, 5G New Radio (NR) Training Course, Wireless Training. Visit tonex.com for course and workshop detail.
5G NR Training, 5G New Radio (NR) Training Course, Wireless Training - Tonex Training
https://www.tonex.com/training-courses/5g-nr-training-5g-new-radio/
Slides dayone-121110052003-phpapp02
This document provides an overview of LTE (Long Term Evolution) including its evolution from previous 3GPP standards like UMTS, key drivers and requirements for LTE, LTE technology basics, frequency bands, and features introduced in subsequent releases up to Release 11. It discusses technologies like OFDMA, SC-FDMA and the LTE network protocol. It also outlines the spectrum used for LTE FDD and TDD modes.
Emerson Eduardo Rodrigues - ENGINEERING STUDIES1 Rp 160664 new work item on u...
Emerson Eduardo Rodrigues - ENGINEERING STUDIES1 Rp 160664 new work item on u...EMERSON EDUARDO RODRIGUES
ENGENHEIRO EMERSON EDUARDO RODRIGUES BECOME AVAILABLE FOR EVERYONE GOOD SHARING KNOWLEDGE TO SPREAD PROPERLY TEACHINGS TO HELP ENGINEERS HOW TO WORKEmerson Eduardo Rodrigues - ENGINEERING STUDIES1 Rp 160664
ENGENHEIRO EMERSON EDUARDO RODRIGUES BECOME AVAILABLE FOR EVERYONE GOOD SHARING KNOWLEDGE TO SPREAD PROPERLY TEACHINGS TO HELP ENGINEERS HOW TO WORK
F01 beam forming_srs
This document provides an overview and technical details regarding beamforming and sounding reference signal optimization for LTE. It discusses sector beamforming for common channels using weighted factors. It compares RL15 single-stream beamforming (TM7) to RL25 dual-stream beamforming (TM8), describing their implementations. The document also covers sounding reference signal configurations, including hopping patterns and parameters. Performance results and configuration parameters for beamforming are presented.
BSN 5G Pathway Presentation January 2019
Broad Sky presents "the Path to 5G" this month discussing the evolution of 5G, Take a deep dive on where 5G fits in the carrier build out, when it will be available and its advantages. Find out what is available in 4G now with carrier aggregation, speeds and performance and why now is the time to deploy 4G wireless which will lead us to 5G.
GSA presentation at GTI spectrum workshop at ITU bangkok
The document discusses spectrum requirements and harmonization for 5G networks. It notes that 5G networks will need spectrum both below and above 6 GHz to support a variety of use cases. Spectrum below 6 GHz is needed for coverage, while spectrum above 6 GHz can enable higher data rates but over shorter ranges. The document examines potential frequency bands for early 5G deployment and discusses the need for international harmonization to help develop global economies of scale. It also analyzes technical considerations regarding frequency division duplexing and time division duplexing in millimeter wave bands for 5G.
ETSI mWT ISG
Presented by Debora Gentina, Senior Marketing Manager Huawei – deputizing for Renato Lombardi (VP Microwave Product Line Huawei) Chairman of ETSI ISG mWT
at the UK Spectrum Policy Forum Cluster 2 meeting on 16th Dec.
Wimax deployment considerations
This document discusses WiMAX deployment considerations for fixed wireless access networks using licensed spectrum in the 2.5 GHz and 3.5 GHz bands. It addresses base station channel capacity versus range for different propagation environments, and analyzes deployment examples to understand the relationship between infrastructure costs and available spectrum. Indoor terminal deployment impacts on capacity and range are also examined.
5 g ran_jnn_atal_fdp
This document discusses 5G RAN and NR technology. It provides an overview of 5G targets including peak data rates, latency requirements, and connection densities. It then discusses the 5G RAN approach and requirements, including deployment flexibility, open interfaces, and support for sharing RAN between operators. The document summarizes the 5G NR specifications, including OFDMA, numerology flexibility to support different services, and improved spectral efficiency over LTE. It also outlines the 5G NR protocol architecture, including user and control plane functions.
1_LTE and LTE Advanced.pptx
This document provides an overview of LTE and LTE Advanced mobile communication standards. It discusses the evolution of cellular networks and the working group structure of 3GPP. Tables summarize key performance requirements and throughput capabilities for LTE Release 8 and LTE Advanced. Requirements for LTE network architecture and the capabilities introduced in 3GPP Releases 8, 9, and 10 are also outlined.
Semelhante a Intermediate: Bandwidth Parts (BWP) (20)
5G NR Training, 5G New Radio (NR) Training Course, Wireless Training - Tonex ...
5G NR Training, 5G New Radio (NR) Training Course, Wireless Training - Tonex ...
Emerson Eduardo Rodrigues - ENGINEERING STUDIES1 Rp 160664 new work item on u...
Emerson Eduardo Rodrigues - ENGINEERING STUDIES1 Rp 160664 new work item on u...
Emerson Eduardo Rodrigues - ENGINEERING STUDIES1 Rp 160664
Emerson Eduardo Rodrigues - ENGINEERING STUDIES1 Rp 160664
GSA presentation at GTI spectrum workshop at ITU bangkok
GSA presentation at GTI spectrum workshop at ITU bangkok
1-LTE&NR Architecture & principles EMERSON EDUARDO RODRIGUES.pptx
1-LTE&NR Architecture & principles EMERSON EDUARDO RODRIGUES.pptx
1-LTE&NR Architecture & principles EMERSON EDUARDO RODRIGUES.pptx
1-LTE&NR Architecture & principles EMERSON EDUARDO RODRIGUES.pptx
Mais de 3G4G
TechKnowledge Technology Stories - Part 3: Satellites - Our Friends In The Sk...
When we think about Satellites, we think about what we use them for but in reality they are our friends and helpers in the sky. In this tutorial we look at how satellites are useful as a connectivity option, how it helps us map and navigate, how we can use location based services, how we can watch broadcast video or listen to broadcast radio and last but not least, how satellites are helping us observe and monitor the earth.
You can find the #TechKnowledge slides and other details on our webpage here: https://www.3g4g.co.uk/TechKnowledge/
All our #3G4G5G slides and videos are available at:
Website : https://www.3g4g.co.uk/
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
Misc: What are No Mobile Coverage Zones called?
In this short tutorial we will look at the different terms that are used for areas with no mobile coverage. The terminology varies depending on the part of the world.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
TechKnowledge Technology Stories - Part 2: Connecting Everything Everywhere…
In this video we discuss the different connectivity options available to connect various devices, gadgets and appliances to the internet. This is just the beginning, everything that can be connected will eventually get connected.
You can find the #TechKnowledge slides and other details on our webpage here: https://www.3g4g.co.uk/TechKnowledge/
All our #3G4G5G slides and videos are available at:
Website : https://www.3g4g.co.uk/
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
TechKnowledge Technology Stories - Part 1: Smaller, Faster, Cheaper and More…
In the first video of this ‘TechKnowledge Technology Stories’ series, we will look at how technology has evolved by things getting smaller, faster, cheaper and much more. We will investigate Moore’s law and how it helps creating a future technology roadmap.
You can find the #TechKnowledge slides and other details on our webpage here: https://www.3g4g.co.uk/TechKnowledge/
All our #3G4G5G slides and videos are available at:
Website : https://www.3g4g.co.uk/
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
Beginners: An Quick Introduction to 3GPP
3GPP is the 3rd Generation Partnership Project, an international standards organization that develops protocols for mobile telecommunications. It was formed in 1998 to create a single global standard for 3G networks based on IMT-2000. 3GPP brings together seven telecommunications standards development organizations to produce technical specifications that are then adopted as standards.
Misc: Mobile Technology and Healthcare
5G is often promoted as a panacea for all industries including healthcare. This presentation and video looks not only at 5G but other connectivity options that can be used to provide solutions for healthcare. In addition, this presentation will look at different components of the mobile network and explore the role of devices in healthcare.
All our #3G4G5G slides, videos, blogs and tutorials are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
6G and Beyond-5G Page: https://www.3g4g.co.uk/6G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3G4G Website – https://www.3g4g.co.uk/
3G4G Blog – https://blog.3g4g.co.uk/
Telecoms Infrastructure Blog – https://www.telecomsinfrastructure.com/
Operator Watch Blog – https://www.operatorwatch.com/
Connectivity Technology Blog – https://www.connectivity.technology/
Free 5G Training – https://www.free5gtraining.com/
Free 6G Training – https://www.free6gtraining.com/
Should we stop the shutdown of 2G/3G to save lives??
A lack of VoLTE standardisation breaks voice calling globally
Presented on 29 April 2022 by Rudolf van der Berg
*** SHARED WITH PERMISSION ***
Opinion – 5G Reality Check: Speeds
One of the common questions that we encounter is why are 5G speeds so low as we were promised 5G downlink speeds of 20 Gbps. Most people do not understand how the 5G speeds are calculated and what do they depend on. In many cases, the network won’t be capable of delivering higher speeds due to some or the other limitation.
In this presentation and video we will look at the real world 5G speeds and try to map it to why these speeds are what they are.
All our #3G4G5G slides, videos, blogs and tutorials are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
6G and Beyond-5G Page: https://www.3g4g.co.uk/6G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3G4G Website – https://www.3g4g.co.uk/
3G4G Blog – https://blog.3g4g.co.uk/
Telecoms Infrastructure Blog – https://www.telecomsinfrastructure.com/
Operator Watch Blog – https://www.operatorwatch.com/
Connectivity Technology Blog – https://www.connectivity.technology/
Free 5G Training – https://www.free5gtraining.com/
Free 6G Training – https://www.free6gtraining.com/
Technology Introduction Series: Edge Computing tutorial.pdf
Technology Introduction Series brings to you tutorials from experts and organisations across the Telecom Industry.
In this video, Jim Morrish, Founding Partner of Transforma Insights provides a tutorial on Edge Computing. Transforma Insights is a leading research firm focused on the world of Digital Transformation (DX).
In this presentation, Jim covers the following topics:
Definitions of Edge Computing.
How and why Edge Computing is used.
Planning for deployment of Edge Computing.
Forecasts for Edge Computing.
All our #3G4G5G slides, videos, blogs and tutorials are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
6G and Beyond-5G Page: https://www.3g4g.co.uk/6G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3G4G Website – https://www.3g4g.co.uk/
3G4G Blog – https://blog.3g4g.co.uk/
Telecoms Infrastructure Blog – https://www.telecomsinfrastructure.com/
Operator Watch Blog – https://www.operatorwatch.com/
Connectivity Technology Blog – https://www.connectivity.technology/
Free 5G Training – https://www.free5gtraining.com/
Free 6G Training – https://www.free6gtraining.com/
6G: Potential Use Cases and Enabling Technologies
This white paper presents an overview of some of the promising applications and use case envisioned for 6G, with the objective to highlight the potential for new markets and to provide an indication of the expected technical requirements. The white paper then describes some of the enabling technologies for meeting the performance requirements of 6G.
Authors: Ritvik Gupta, Student (A-Levels), Sutton Grammar School, London, United Kingdom under the supervision of Dr Biplab Sidkar, Associate Professor , Dept of Electrical and Computer Engineering, National University of Singapore
3GPP SON Series: SON Management in HetNets and Enhanced ICIC (eICIC)
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at SON Management in Heterogeneous Networks (HetNets), including Enhanced ICIC (eICIC) and Further Enhanced ICIC (FeICIC)
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
SON Page: https://www.3g4g.co.uk/SON/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: Energy Savings (ES)
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at how SON enables Energy Savings
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
SON Page: https://www.3g4g.co.uk/SON/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: Cell Outage Detection and Compensation (COD & COC)
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this tutorial we will understand what is meant by Cell Outage Management (COM). COM comprises of Cell Outage Detection (COD) and Cell Outage Compensation (COC).
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
SON Page: https://www.3g4g.co.uk/SON/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: Minimization of Drive Testing (MDT)
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at a very important feature called Minimization of Drive Testing (MDT)
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
SON Page: https://www.3g4g.co.uk/SON/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: Coverage and Capacity Optimization (CCO)
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at how Coverage and Capacity Optimization (CCO) helps solve coverage issues and improves the network capacity.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
SON Page: https://www.3g4g.co.uk/SON/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: SON in 3GPP Release-10 – Self-healing
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at Self-Healing features that were defined as part of 3GPP Release-10
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
SON Page: https://www.3g4g.co.uk/SON/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
3GPP SON Series: RACH Optimization
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at Random Access Channel (RACH) Optimization
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
SON Page: https://www.3g4g.co.uk/SON/
3GPP SON Series: Mobility Robustness Optimization (MRO)
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we look at Mobility Robustness Optimization (MRO) that was introduced as part of LTE/4G in 3GPP Release-9
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
SON Page: https://www.3g4g.co.uk/SON/
3GPP SON Series: SON in 3GPP Release-9 – Self-optimization
This SON tutorial is part of the 3GPP Self-Organizing Networks series (#3GPPSONSeries). In this part we will look at what features were defined as part of 3GPP Release-9.
At a high level, we can say that the main focus of 3GPP for SON in Release-9 was Self-optimization. There are many different self-optimization use-cases that have been discussed as part of Rel-9. In this video we will look at Self-optimization at a very high level and discuss some of the use cases and features in the following videos.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
SON Page: https://www.3g4g.co.uk/SON/
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Beginners: Energy Consumption in Mobile Networks - RAN Power Saving Schemes
This tutorial looks at energy consumption in the mobile networks, especially 4G and 5G and looks at various ways in which the vendors and standards are working on to reduce the power consumption.
At a high level, there are three layers of optimisation: Network level, Site level and Equipment level. This presentation looks at some of the ways the optimisation is achieved.
There is a long list of references available for anyone interested in researching this topic further.
All our #3G4G5G slides and videos are available at:
Videos: https://www.youtube.com/3G4G5G
Slides: https://www.slideshare.net/3G4GLtd
5G Page: https://www.3g4g.co.uk/5G/
Free Training Videos: https://www.3g4g.co.uk/Training/
Mais de 3G4G (20)
TechKnowledge Technology Stories - Part 3: Satellites - Our Friends In The Sk...
TechKnowledge Technology Stories - Part 3: Satellites - Our Friends In The Sk...
TechKnowledge Technology Stories - Part 2: Connecting Everything Everywhere…
TechKnowledge Technology Stories - Part 2: Connecting Everything Everywhere…
TechKnowledge Technology Stories - Part 1: Smaller, Faster, Cheaper and More…
TechKnowledge Technology Stories - Part 1: Smaller, Faster, Cheaper and More…
Should we stop the shutdown of 2G/3G to save lives??
Should we stop the shutdown of 2G/3G to save lives??
Technology Introduction Series: Edge Computing tutorial.pdf
Technology Introduction Series: Edge Computing tutorial.pdf
3GPP SON Series: SON Management in HetNets and Enhanced ICIC (eICIC)
3GPP SON Series: SON Management in HetNets and Enhanced ICIC (eICIC)
3GPP SON Series: Cell Outage Detection and Compensation (COD & COC)
3GPP SON Series: Cell Outage Detection and Compensation (COD & COC)
3GPP SON Series: Minimization of Drive Testing (MDT)
3GPP SON Series: Minimization of Drive Testing (MDT)
3GPP SON Series: Coverage and Capacity Optimization (CCO)
3GPP SON Series: Coverage and Capacity Optimization (CCO)
3GPP SON Series: SON in 3GPP Release-10 – Self-healing
3GPP SON Series: SON in 3GPP Release-10 – Self-healing
3GPP SON Series: Mobility Robustness Optimization (MRO)
3GPP SON Series: Mobility Robustness Optimization (MRO)
3GPP SON Series: SON in 3GPP Release-9 – Self-optimization
3GPP SON Series: SON in 3GPP Release-9 – Self-optimization
Beginners: Energy Consumption in Mobile Networks - RAN Power Saving Schemes
Beginners: Energy Consumption in Mobile Networks - RAN Power Saving Schemes
Último
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Discover the seamless integration of RPA (Robotic Process Automation), COMPOSER, and APM with AWS IDP enhanced with Slack notifications. Explore how these technologies converge to streamline workflows, optimize performance, and ensure secure access, all while leveraging the power of AWS IDP and real-time communication via Slack notifications.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
Fueling AI with Great Data with Airbyte Webinar
This talk will focus on how to collect data from a variety of sources, leveraging this data for RAG and other GenAI use cases, and finally charting your course to productionalization.
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Simplify your search for a reliable Python development partner! This list presents the top 10 trusted US providers offering comprehensive Python development services, ensuring your project's success from conception to completion.
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Choosing The Best AWS Service For Your Website + API.pptx
Have you ever been confused by the myriad of choices offered by AWS for hosting a website or an API?
Lambda, Elastic Beanstalk, Lightsail, Amplify, S3 (and more!) can each host websites + APIs. But which one should we choose?
Which one is cheapest? Which one is fastest? Which one will scale to meet our needs?
Join me in this session as we dive into each AWS hosting service to determine which one is best for your scenario and explain why!
Artificial Intelligence for XMLDevelopment
In the rapidly evolving landscape of technologies, XML continues to play a vital role in structuring, storing, and transporting data across diverse systems. The recent advancements in artificial intelligence (AI) present new methodologies for enhancing XML development workflows, introducing efficiency, automation, and intelligent capabilities. This presentation will outline the scope and perspective of utilizing AI in XML development. The potential benefits and the possible pitfalls will be highlighted, providing a balanced view of the subject.
We will explore the capabilities of AI in understanding XML markup languages and autonomously creating structured XML content. Additionally, we will examine the capacity of AI to enrich plain text with appropriate XML markup. Practical examples and methodological guidelines will be provided to elucidate how AI can be effectively prompted to interpret and generate accurate XML markup.
Further emphasis will be placed on the role of AI in developing XSLT, or schemas such as XSD and Schematron. We will address the techniques and strategies adopted to create prompts for generating code, explaining code, or refactoring the code, and the results achieved.
The discussion will extend to how AI can be used to transform XML content. In particular, the focus will be on the use of AI XPath extension functions in XSLT, Schematron, Schematron Quick Fixes, or for XML content refactoring.
The presentation aims to deliver a comprehensive overview of AI usage in XML development, providing attendees with the necessary knowledge to make informed decisions. Whether you’re at the early stages of adopting AI or considering integrating it in advanced XML development, this presentation will cover all levels of expertise.
By highlighting the potential advantages and challenges of integrating AI with XML development tools and languages, the presentation seeks to inspire thoughtful conversation around the future of XML development. We’ll not only delve into the technical aspects of AI-powered XML development but also discuss practical implications and possible future directions.
Main news related to the CCS TSI 2023 (2023/1695)
An English 🇬🇧 translation of a presentation to the speech I gave about the main changes brought by CCS TSI 2023 at the biggest Czech conference on Communications and signalling systems on Railways, which was held in Clarion Hotel Olomouc from 7th to 9th November 2023 (konferenceszt.cz). Attended by around 500 participants and 200 on-line followers.
The original Czech 🇨🇿 version of the presentation can be found here: https://www.slideshare.net/slideshow/hlavni-novinky-souvisejici-s-ccs-tsi-2023-2023-1695/269688092 .
The videorecording (in Czech) from the presentation is available here: https://youtu.be/WzjJWm4IyPk?si=SImb06tuXGb30BEH .
5th LF Energy Power Grid Model Meet-up Slides
5th Power Grid Model Meet-up
It is with great pleasure that we extend to you an invitation to the 5th Power Grid Model Meet-up, scheduled for 6th June 2024. This event will adopt a hybrid format, allowing participants to join us either through an online Mircosoft Teams session or in person at TU/e located at Den Dolech 2, Eindhoven, Netherlands. The meet-up will be hosted by Eindhoven University of Technology (TU/e), a research university specializing in engineering science & technology.
Power Grid Model
The global energy transition is placing new and unprecedented demands on Distribution System Operators (DSOs). Alongside upgrades to grid capacity, processes such as digitization, capacity optimization, and congestion management are becoming vital for delivering reliable services.
Power Grid Model is an open source project from Linux Foundation Energy and provides a calculation engine that is increasingly essential for DSOs. It offers a standards-based foundation enabling real-time power systems analysis, simulations of electrical power grids, and sophisticated what-if analysis. In addition, it enables in-depth studies and analysis of the electrical power grid’s behavior and performance. This comprehensive model incorporates essential factors such as power generation capacity, electrical losses, voltage levels, power flows, and system stability.
Power Grid Model is currently being applied in a wide variety of use cases, including grid planning, expansion, reliability, and congestion studies. It can also help in analyzing the impact of renewable energy integration, assessing the effects of disturbances or faults, and developing strategies for grid control and optimization.
What to expect
For the upcoming meetup we are organizing, we have an exciting lineup of activities planned:
-Insightful presentations covering two practical applications of the Power Grid Model.
-An update on the latest advancements in Power Grid -Model technology during the first and second quarters of 2024.
-An interactive brainstorming session to discuss and propose new feature requests.
-An opportunity to connect with fellow Power Grid Model enthusiasts and users.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
Skybuffer SAM4U tool for SAP license adoption
Manage and optimize your license adoption and consumption with SAM4U, an SAP free customer software asset management tool.
SAM4U, an SAP complimentary software asset management tool for customers, delivers a detailed and well-structured overview of license inventory and usage with a user-friendly interface. We offer a hosted, cost-effective, and performance-optimized SAM4U setup in the Skybuffer Cloud environment. You retain ownership of the system and data, while we manage the ABAP 7.58 infrastructure, ensuring fixed Total Cost of Ownership (TCO) and exceptional services through the SAP Fiori interface.
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Best 20 SEO Techniques To Improve Website Visibility In SERP
Boost your website's visibility with proven SEO techniques! Our latest blog dives into essential strategies to enhance your online presence, increase traffic, and rank higher on search engines. From keyword optimization to quality content creation, learn how to make your site stand out in the crowded digital landscape. Discover actionable tips and expert insights to elevate your SEO game.
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for life science domain, where you retriever information from biomedical knowledge graphs using LLMs to increase the accuracy and performance of generated answers
Último (20)
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Nordic Marketo Engage User Group_June 13_ 2024.pptx
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Let's Integrate MuleSoft RPA, COMPOSER, APM with AWS IDP along with Slack
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Your One-Stop Shop for Python Success: Top 10 US Python Development Providers
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Choosing The Best AWS Service For Your Website + API.pptx
Choosing The Best AWS Service For Your Website + API.pptx
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Best 20 SEO Techniques To Improve Website Visibility In SERP
Best 20 SEO Techniques To Improve Website Visibility In SERP
WeTestAthens: Postman's AI & Automation Techniques
WeTestAthens: Postman's AI & Automation Techniques
GraphRAG for Life Science to increase LLM accuracy
GraphRAG for Life Science to increase LLM accuracy
Intermediate: Bandwidth Parts (BWP)
- 1. Bandwidth Part (BWP) Concept in 5G @3g4gUK
- 2. Channel Bandwidth in 4G (LTE/LTE-A/LTE-A Pro) ©3G4G 4G Bandwidths (MHz) 1.4 3 5 10 15 20
- 3. 3GPP defined 5G Spectrum Ranges ©3G4G 3.3 3.8 4.2 4.4 5.0 24.25 27.5 29.5 37 40 26.5 n78 n79 n77 n258 n260 n261 28.35 n257 Bandwidth 900 MHz 500 MHz 600 MHz 3000 MHz (3 GHz) 3250 MHz (3.25 GHz) 3000 MHz (3 GHz) 850 MHz • 3GPP defines new NR (New Radio) bands in FR1 and FR2 in 3GPP Rel.15 NR • FR1: 450 MHz – 6 GHz • Upper range is changing to 7.125 GHz • FR2: 24.25 GHz – 52.6 GHz
- 4. Bandwidth of FR1 5G bands ©3G4G
- 5. Channel Bandwidth in 5G: FR1 ©3G4G 5G FR1 Bandwidths (MHz) 5 10 15 20 25 30 40 50 60 80 90 100 …
- 6. Bandwidth of FR2 5G bands ©3G4G
- 7. Channel Bandwidth in 5G: FR2 ©3G4G 5G FR2 Bandwidths (MHz) 50 100 200 400
- 8. Carrier Bandwidth Part (BWP) ©3G4G Picture Source: Rohde & Schwarz
- 9. Why BWP? ©3G4G • In LTE, maximum BW is 20 MHz • Its easy for all devices to support this bandwidth • In 5G NR, maximum BW is 400 MHz for FR2 • Cheaper devices may not want to support this large bandwidth • A device does not need to monitor the whole of bandwidth for power consumption reduction • BWP allows device-side receiver ‘bandwidth adaptation’ to reduce the device energy consumption • A small BW is used for monitoring control channels and receiving low/medium data rates, while dynamically using a wideband receiver only when needed to support very high data rates. • Rel-15 only supports single active BWP but this will change in future releases
- 10. BandWidth Part (BWP) in Specs ©3G4G • BWP was referred to as ‘Carrier Bandwidth Part’ in early version of 3GPP TS 38.211:4.4.5 but renamed as Bandwidth Part in the latest version • BWP is a contiguous set of physical resource blocks (PRB), selected from a contiguous subset of the common resource blocks (CRB) for a given numerology on a given carrier. It can be illustrated as shown. • A UE can be configured with up to 4 BWPs in the downlink and with up to 4 BWPs in the uplink with a single downlink bandwidth part being active at a given time. • If a UE is configured with a supplementary uplink (SUL), the UE can in addition be configured with up to four bandwidth parts in the supplementary uplink with a single supplementary uplink bandwidth part being active at a given time. Picture Source: ShareTechNote
- 11. BWP Configuration & Switching Signalling ©3G4G Picture Source: Rohde & Schwarz
- 12. 5G DCI (Downlink Control Information) ©3G4G For more details see: ShareTechNote
- 13. BWP Switching ©3G4G Picture Source: Rohde & Schwarz
- 14. Free eBook from Rohde & Schwarz (coming soon) ©3G4G The 5G New Radio eBook from Rohde & Schwarz
- 15. Thank You To learn more, visit: 3G4G Website – http://www.3g4g.co.uk/ 3G4G Blog – http://blog.3g4g.co.uk/ 3G4G Small Cells Blog – http://smallcells.3g4g.co.uk/ Operator Watch - http://operatorwatch.3g4g.co.uk/ Follow us on Twitter: https://twitter.com/3g4gUK Follow us on Facebook: https://www.facebook.com/3g4gUK/ Follow us on Linkedin: https://www.linkedin.com/company/3g4g Follow us on Slideshare: https://www.slideshare.net/3G4GLtd Follow us on Youtube: https://www.youtube.com/3G4G5G ©3G4G