2. ISO (or Film Speed) in traditional photography
refers to how sensitive film is to light
3. Open www.camerasim.com
Take a photo using 100 ISO then take one at 6400
ISO
Because 6400 ISO is more sensitive to light the
image will be over exposed
Try at different ISO settings – remember you’re not
even touching aperture or shutter speeds
4. ISO is the easiest of the camera settings to learn –
just set it and forget it:
If it’s a bright sunny day – use 100 ISO:
If it’s dark and dingy – use 1600 or 3200 ISO
If you’re not sure use 400 ISO
5. As you will be taking photos inside a building –
where it will be dark – you should set your ISO to
1600+ before you start shooting
6. As you increase the ISO setting you also increase
the amount of noise (or grain) your photo will
have:
7.
8.
9. Before you start set your camera to 1600 ISO
Start in Shutter Priority mode and set to at least
1/60th
If necessary, wedge your camera against a wall
when taking photos
Try to avoid using flash
10. Before you start set your camera to 1600 ISO
Start in Shutter Priority mode and set to at least
1/60th
If necessary, wedge your camera against a wall
when taking photos
Try to avoid using flash