Pesq, Desenv e Inov (PDI) e Garantia de Sist e Prod (GSP): Ref Bibliog

PESQUISA, DESENVOLVIMENTO E INOVAÇÃO
EThICS TEMAS SOBRE METODOLOGIA DE PDI & GSP
ENGINEERING
Relação Geral de Referências Bibliográficas
<EThICS 039.B01.02_PDI & GSP_Ref Bibliog> - 29/10/2011- Pág. 1 de 22

SUMÁRIO

1. INTRODUÇÃO ................................................................................................................... 2
1.1. Propósito deste Documento ......................................................................................................................... 2
1.2. Acrônimos ..................................................................................................................................................... 2
1.3. Motivações .................................................................................................................................................... 2
1.4. Referências sobre PDI & GSP...................................................................................................................... 2
2. REFERÊNCIAS SOBRE GESTÃO DE PDI & GSP .......................................................... 4
2.1. Ciclo de Vida de Projetos, Sistemas e Produtos .......................................................................................... 4
2.2. Custos do Ciclo de Vida de Projetos, Sistemas e Produtos......................................................................... 4
2.3. Gestão de Pesquisa, Desenvolvimento e Inovação ..................................................................................... 4
2.4. Gestão de Garantia de Sistemas e Produtos ............................................................................................... 6
2.5. Gestão de Riscos ......................................................................................................................................... 6
2.6. Gestão de Configuração ............................................................................................................................... 7
2.7. Gestão da Garantia de Software .................................................................................................................. 7
2.8. Gestão de Direitos e Penalidades de Garantias .......................................................................................... 8
2.9. Gestão da Informação e do Conhecimento .................................................................................................. 8
2.10. Aprendizado Organizacional..................................................................................................................... 9
2.11. Criatividade e Inovação .......................................................................................................................... 10
2.12. Inteligência Tecnológica e Competitiva .................................................................................................. 11
3. REFERÊNCIAS SOBRE ENGENHARIA DE PDI & GSP................................................ 12
3.1. Engenharia de Sistemas............................................................................................................................. 12
3.2. Engenharia de Requisitos........................................................................................................................... 13
3.3. Engenharia de Garantia da Qualidade ....................................................................................................... 14
3.4. Engenharia de Garantia de Confiabilidade ................................................................................................. 14
3.5. Engenharia de Dependabilidade de Sistemas ........................................................................................... 17
3.6. Engenharia de Mantenabilidade ................................................................................................................. 18
3.7. Engenharia de Segurança de Sistemas ..................................................................................................... 19
3.8. Engenharia de Proteção de Sistemas ........................................................................................................ 19
3.9. Engenharia de Fatores Humanos ............................................................................................................... 20
3.10. Engenharia de Suportabilidade e Logística ............................................................................................ 21
3.11. Engenharia de Sustentabilidade de Sistemas e Produtos ..................................................................... 21
3.12. Engenharia de Verificação e Validação .................................................................................................. 21
3.13. Engenharia de Produção ........................................................................................................................ 22
3.14. Engenharia de Resiliência ...................................................................................................................... 22

Outubro- 2011 - Autor: Antonio Sallum Librelato – EThICS Engineering

ENGINEERING

1. INTRODUÇÃO
1.1. Propósito deste Documento
O propósito deste documento é apresentar a relação das principais referências bibliográficas sobre os diferentes
temas conexos à PDI - Pesquisa, Desenvolvimento e Inovação e, em especial, sobre a GSP - Garantia de
Sistemas e Produtos.

1.2. Acrônimos
Os acrônimos usados neste documento e seus significados são os seguintes:

ACRÔNIMO DESCRIÇÃO
CVPP Ciclo de Vida de Projetos e Produtos
EThICS EThICS Engineering
GSP Garantia de Sistemas e Produtos
LCC Life Cycle Cost
PDI Pesquisa, Desenvolvimento e Inovação
PTI Programa de Treinamento e Implantação

1.3. Motivações
Para permitir a divulgação e a orientação aos interessados em conceitos, princípios, métodos e processos de PDI
e de GSP, um Programa de Treinamento e Implantação foi criado pela EThICS, abrangendo os diferentes
temas sobre o assunto.

Para a os estudos e as elaborações dos documentos desse Programa foram tomadas como referências as obras
relacionadas a seguir, agrupadas pelos principais temas de PDI & GSP.

1.4. Referências sobre PDI & GSP
A seguir, as referências bibliográficas estão agrupadas segundo os seguintes temas:

• Referências sobre Gestão:
• Ciclo de Vida de Projetos, Sistemas e Produtos
• Custos do Ciclo de Vida de Projetos, Sistemas e Produtos
• Gestão de Pesquisa, Desenvolvimento e Inovação
• Gestão de Garantia de Sistemas e Produtos
• Gestão de Riscos
• Gestão de Configuração
• Gestão da Garantia de Software
• Gestão de Direitos e Penalidades de Garantias
• Gestão da Informação e do Conhecimento
• Aprendizado Organizacional
• Criatividade e Inovação
• Inteligência Tecnológica e Competitiva
• Referências sobre Engenharia:
• Engenharia de Sistemas
• Engenharia de Requisitos
• Engenharia de Garantia da Qualidade
• Engenharia de Garantia de Confiabilidade
• Engenharia de Dependabilidade de Sistemas
• Engenharia de Mantenabilidade
• Engenharia de Segurança de Sistemas
• Engenharia de Proteção de Sistemas
• Engenharia de Fatores Humanos
• Engenharia de Suportabilidade e Logística
• Engenharia de Sustentabilidade de Sistemas e Produtos
• Engenharia de Verificação e Validação

ENGINEERING

• Engenharia de Produção
• Engenharia de Resiliência

Considerando que algumas obras abrangem mais que um dos termos acima, optamos por relacioná-las repetidas
a cada tema.

As obras relacionadas são dos tipos:

• Livros impressos ou eletrônicos.
• Artigos impressos ou eletrônicos.
• Sites da Internet.

Para permitir a citação de cada obra, adota-se um acrônimo de identificação da mesma, formado pelas primeiras
letras do nome do primeiro autor da obra, seguidas por um número de sequência conforme a ordem histórica de
cadastramento da mesma.

A descrição dos cadastros das obras segue as indicações usuais em biblioteconomia, com base na obra
[FRAN_01] e nas orientações da Bacharela em Biblioteconomia e Mestre em Ciência da Informação Simone Lucas
Gonçalves de Oliveira.

FRANÇA, J. L.; VASCONCELOS, A. C.; MAGALHÃES, M. H. A.; BORGES, S. M. Manual para
[FRAN_01]
normalização de publicações técnico-científicas. 6ª ed. Belo Horizonte, MG: Ed. UFMG, 2003. 230 p.


ENGINEERING

2. REFERÊNCIAS SOBRE GESTÃO DE PDI & GSP
2.1. Ciclo de Vida de Projetos, Sistemas e Produtos
GIUDICE, F.; ROSA, G. L.; RISITANO, A. Product design for the environment - a life cycle approach.
[GIUD_01]
Boca Raton, FL: CRC Press, 2006. 471 p.
SAASKSVUORI, A.; IMMONEN, A. Product Life Cycle Management. 3rd ed. Part 1. Berlin, Germany:
[SAAS_01]
Springer-Verlag, 2008. 253 p.
SAASKSVUORI, A.; IMMONEN, A. Product Life Cycle Management. 3rd ed. Part 2. Berlin, Germany:
[SAAS_02]
Springer-Verlag, 2008. 253 p.
WESTLAND, J. The project management life cycle. London, UK: Cambridge University Press, 2006.
[WEST_01]
257 p.

[YANG_01] YANG, Guangbin. Life cycle reliability engineering. Hoboken, NJ: John Wiley, 2007. 517 p.

2.2. Custos do Ciclo de Vida de Projetos, Sistemas e Produtos
BOUSSABAINE, H.; KIRKHAM, R. Whole life-cycle costing: risk and risk responses. Blackwell
[BOUS_01]
Publishing, 2004. 252 P.
State of Alaska. Department of Education & Early Development. Life cycle cost analysis. handbook.
[SADE_01]
Juneau, Alaska: 1999.30 p.

2.3. Gestão de Pesquisa, Desenvolvimento e Inovação
ALBRECHT, K. Radar corporativo: como entender os cenários que estarão regendo o futuro de seus
[ALBR_01]
negócios. São Paulo, SP: Makron Books, 2000.238 p.
ALMEIDA, S. Gestão de sonhos, riscos e oportunidades. Entrevista de Amir Klink a Sérgio Almeida.
[ALME_01]
Salvador, BA: Casa da Qualidade, 2000. 193 p.
ARMSTRONG, J. Design matters: the organization and principles of engineering design. London, UK:
[ARMS_01]
Springer Verlag, 2008. 164 p.
ASIMOV, M. Introdução ao projeto de engenharia: fundamentos do projeto de engenharia. São Paulo,
[ASIM_01]
SP: Ed. Mestre Jou, 1968. 171 p.
BOAR, B. Tecnologia da informação: a arte do planejamento estratégico. 2a. Ed. São Paulo, SP:
[BOAR_01]
Berkeley Brasil, 2002. 339 p.
BOITEUX, C. D. Administração de projetos: gerência e implantação. Rio de Janeiro, RJ: LTC,
[BOIT_01]
1982.149 p.
CHIAVENATO, I. Construção de talentos: coaching & mentoring: as novas ferramentas de gestão de
[CHIA_01]
pessoas. Rio de Janeiro, RJ: Campus, 2002. 188 p.
CHOUDHUURY, S. Administração no século XXI: o estilo de gerenciar hoje e no futuro.São Paulo,
[CHOU_01]
SP: Pearson Educ., 2003.292 p.

[CLAU_01] CLAUSEWITZ, C. von. Principles of war. Mineola, NY: Dover Pub., 2003. 82 p.

[COCI_01] COCIAN L. F. E. Engenharia - uma breve introdução. 258 p.

[COST_01] COSTA, E. A. Gestão estratégica. São Paulo, SP: Saraiva Ed., 2002.292 p.

DAVIS, S.; MEYER, C. Blur: a velocidade da mudança na economia integrada. 4a. Ed. Rio de Janeiro,
[DAVI_01]
RJ: Campus, 1999.188 p.
DOYLE, M.; STRAUS, D. The new interaction method: how to make meetings work! New York, NY:
[DOYL_01]
Berkeley, 1993. 298 p.

[DRUC_02] DRUCKER, P. F. Tecnologia, gerência e sociedade. 2a. Ed. Petrópolis, RJ: Ed. Vozes, 1973.215 p.

FILION, L. J.; DOLABELA, F.; et al. Boa idéias! E agora? - plano de negócio, o caminho seguro para
[FILI_01]
criar e gerenciar sua empresa.São Paulo, SP: Cultura Ed., 2000. 344 p.


ENGINEERING

FRAME, J. D. Managing projects in organizations: how to make the best use of time, techniques, and
[FRAM_01]
people. San Francisco, CA: Jossey-Bas Pub., 1995. 247 p.
FROST, B. Designing metrics: crafting balanced measures for managing performance. Dallas, TX:
[FROS_01]
Measurement International, 2007. 79 p.

[GAJ_01] GAJ, L. O estrategista. São Paulo, SP: Pearson Ed., 2002. 206 p.

GATES, B.; MYHRVOLD, N.; RINEARSON, P. A estrada do futuro. São Paulo, SP: Cia. das Letras,
[GATE_01]
1995. 347 p.
GATES, B. A empresa na velocidade do pensamento, com um sistema nervoso digital. São Paulo, SP:
[GATE_02]
Cia das Letras, 1999. 444 p.
GELLENSON, M. L.; GLOLDBERG, R. Planejamento estratégico, análise de sistemas e projeto de
[GELL_01]
banco de dados: o enfoque de fluxo contínuo. Rio de Janeiro, RJ: LTC, 1986. 211 p.
HARVARD Business Review. Tomada de decisão (decision making) Rio de Janeiro, RJ: Campus,
[HBR_01]
2001. 181 p.
HESSELBEIN, F. ed., et al. A comunidade do futuro: idéias para uma nova comunidade. São Paulo,
[HESS_01]
SP: Futura, 1998. 274 p.
HUNGER, J. D.; WHEELEN, T. L. Gestão estratégica: princípios e prática. 2a. Ed. Rio de Janeiro, RJ:
[HUNG_01]
Reichmann & Affonso Ed., 2002. 272 p.
JÚLIO, C. A.; SALIBI NETO, J., org. Estratégia e planejamento: autores e conceitos imprescindíveis.
[JULI_01]
São Paulo, SP: Publifolha, 2002. 199 p.
KAPLAN, R. S.; NORTON, D. P. Strategy maps: converting intangible assets into tangible outcomes.
[KAPL_01]
Boston, MA: Harvard Business School Pub., 2004. 454 p.
LACERDA, A. C., et al. Tecnologia: estratégia para a competitividade; inserindo a variável tecnológica
[LACE_01]
no planejamento estratégico: o caso Siemens. São Paulo, SP: Nobel, 2001. 173 p.

[LANG_01] LANG, BRIMBERG. Gerência por objetivos. São Paulo, SP: 1982. 191 p.

[LANG_02] LANG, BRIMBERG. Desenvolvimento organizacional. São Paulo, SP: 1981. 92 p.

[LOBA_01] LOBATO, D. M., coord. Estratégia de empresas. Rio de Janeiro, RJ: FGV Ed., 2003. 142 p.

[MALO_01] MALONE, J. O futuro ontem e hoje: de Júlio Verne a Bill Gates. Rio de Janeiro, RJ: Ediouro, 1998.

MARINESCU, I. Product design for manufacture and assembly. 2nd ed. New York, NY: Marcel Dekker,
[MARI_01]
2002. 638 p.
MENDONÇA, Fernando de. Engenharia de sistemas: planejamento e controle de projetos. 2ª ed.
[MEND_01]
Petrópolis, RJ: Ed. Vozes, 1972. 307 p.
National Council of Examiners for Engineering and Surveying. Fundamentals of Engineering -
[NCES_01]
Supplied-Reference Handbook. 4th ed. Clemson, SC: NCEES, 2000. 151 p.
OLIVEIRA, D. P. R. Planejamento estratégico: conceitos, metodologia e práticas. 16a. Ed. São Paulo,
[OLIV_01]
SP: Ed. Atlas, 2001. 337 p.
PENN, M. J.; ZALESNA, E. K. Microtendências: as pequenas forças por trás das grandes mudanças
[PENN_01]
da amanhã. Rio de Janeiro, RJ: Ed. Best Seller, 2008.
ROBERT, M. Estratégia - como as empresas vencedoras dominam seus concorrentes. São Paulo, SP:
[ROBE_01]
Negócio Ed., 1998. 354 p.
SCHRAGE, M. No more teams!: mastering the dynamics of creative collaboration. New York, NY:
[SCHR_01]
Doubleday, 1995. 241 p.
SCHRAGE, M. No more teams!: mastering the dynamics of creative collaboration. New York, NY:
[SCHR_01]
Doubleday, 1995. 241 p.
ROYAL DUTCH SHELL. Shell global scenarios to 2025 - the future business environment: trends,
[SHEL_01]
trade-offs and choices. London, UK: 2005. 217 p.
SHELL I. L. Shell global scenarios to 2025 - the future business environment: trends, trade-off and
[SHEL_01]
choices.


ENGINEERING

STRAUS, D. How to make collaboration work: powerful ways to build consensus, solve problems, and
[STRAU_01]
make decisions. San Francisco, CA: Berret-Koehler Pub, 2002. 247 p.

[TAVA_01] TAVARES, M. C. Gestão estratégica. São Paulo, SP: Ed. Atlas, 2000. 398 p.

TIFFANY, P.; PETERSON, S. D. Planejamento estratégico: o melhor roteiro para um planejamento
[TIFF_01]
estratégico eficaz. Série para dummies. Rio de Janeiro, RJ: Campus, 1998. 386 p.

[TOFF_01] TOFFLER, A. The third wave. USA: Bantam Books, 1990. 537 p.

[TZU_01] TZU, S. A arte da guerra. 7a. Ed. Rio de Janeiro, RJ: Paz e Terra, 1997. 128 p.

[ULAF_01] ULAF, F. Planejamento estratégico pessoal. Curitiba, PR: ADEPH, 2002.267 p.

VALERIANO, D. V. Gerência em projetos: pesquisa, desenvolvimento e engenharia. São Paulo, SP:
[VALE_01]
Makron Books, 1998.438 p.
VASCONCELLOS, P.; PAGNONCELLI, D. Construindo estratégias para vencer: um método prático,
[VASC_01]
objetivo e testado para o sucesso da sua empresa. Rio de Janeiro, RJ: Campus, 2001.370 p.
VIANNA, M. A. F.; VELASCO, S. D. Nas ondas do futuro: uma análise das tendências e das
[VIAN_01]
oportunidades para o amanhã. São Paulo, SP: Ed. Gente, 2001.279 p.
WIEGERS, K. E. Practical project initiation: a handbook with tools. Redmond, WA: Microsoft Press,
[WIEG_03]
2007. 211 p.

2.4. Gestão de Garantia de Sistemas e Produtos
BERG, C. J. High-assurance design: architecting secure and reliable enterprise applications. Upper
[BERG_01]
Saddle River, NJ: Pearson Education, 2005. 696 p.
RAHEJA, D. G.; ALLOCO, M. Assurance technologies principles and practices - a product, process,
[RAHE_01]
and system safety perspective. 2nd ed. Hoboken, NJ: John Wiley, 2006. 472 p.

2.5. Gestão de Riscos
ALEXIOU, K.; JOHSON, J.; ZAMENOPOULUS, T. ed. Embracing complexity in design. Abingdon,
[ALEX_01]
UK: Routledge, 2010. 233 p.
BAHR, Nicholas J. System safety engineering and risk assessment: a practical approach. New York,
[BAHR_01]
NY: Taylor & Francis, 1997. 251 p.
BAKKER, K. Dialogue on risk: effects of project risk management on project success. Groningen, The
[BAKK_01]
Netherlands: University of Groningen, 2011. 222 p.
BARTON, T. J.; SHENKIR, W. G.; WALKER, P. L. Making enterprise risk management pay off: how
[BARS_01]
leading companies implement risk management. Upper Saddle River, NJ: Prentice Hall, 2002. 265 p.
BOUSSABAINE, H.; KIRKHAM, R. Whole life-cycle costing: risk and risk responses. Blackwell
[BOUS_01]
Publishing, 2004. 252 P.
CHAPMAN, C.; WARD, S. Project risk management: processes, techniques & insights 2nd ed.
[CHAP_01]
Chichester, England: John Wiley, 2003. 408 p.
COOPER, D.; GREY, S.; RAYMOND, G.; WALKER, P. Project risk management guidelines:
[COOP_01] managing risk in large projects and complex procurements. Chichester, England: John Wiley, 2005.
385 p.
COX, S.; TAIT, R. Safety, reliability and risk management - an integrated approach. 2nd. Ed. Woburn,
[COX_01]
MA: Butterworth-Heinemann, 1998. 325 p.
[COX_01]
DAMODARAN, A. Strategic risk taking: a framework for risk management. Wharton School
[DAMO_01]
Publishing, 2007. 408 p.
[FAA_01] FAA, USA DoT. Risk management handbook. 2009. 112 p.
HASSETT, M. J.; STEWART, D. G. Probability for risk management. 2nd ed. Winsted, CT: ACTEX
[HASS_01]
Pub, 2006. 450 p.
HOPKIN, P. Fundamentals of risk management: understanding, evaluating and implementing
[HOPK_01]
effective risk management. London, UK: Kogan, 2010. 357 p.
[HUBB_01] HUBBARD, D. W. The failure of risk management: why it's broken and how to fix it. Hoboken, NJ:


ENGINEERING

John Wiley, 2009. 281 p.
[JEYN_01] JEYNES, J. Risk management: 10 principles. Woburn, MA: Butterworth-Heinemann, 2002. 137 p.
JONES, A.; ASHENDEN, D. Risk management for computer security: protecting your network and
[JONA_01]
information assets. Oxford, UK: Elsevier, 2005. 297 p.
[LERC_01] LERCHE, I.; PALEOLOGOA, E. K. Environmental risk analysis. EUA: McGraw-Hill, 2001. 457 p.
MOLAK, V. Fundamentals of risk analysis and risk management. Boca Raton, FL: CRC Press, 1997.
[MOLA_01]
460 p.
NUREG. INEEL/EXT-01-01166: Review of findings for human error contribution to risk in operating
[NURE_01]
events. Washington, DC: Office of Nuclear Regulatory Research, 2001. 107 p.
PERROW, C. Normal accidents: living with high-risk technologies. With a new afterword and a
[PERR_01]
postscript on the Y2K problem. Princeton, NJ: Princeton Univ Press, 1999. 451 p.
RASMUSSEN, J.; SVEDUNG, I. Proactive risk management in a dynamic society. Karlstad, Sweden:
[RASM_01]
Räddningsverket, 2000. 160 p.
SAVAGE, S. L. The flaw of the averages: why we underestimate risk in the face of uncertainty.
[SAVA_01]
Hoboken, NJ: John Wiley, 2009. 392 p.
SMITH, D. J. Reliability, maintainability and risk: practical methods for engineers. 5th ed. Woburn,
[SMIT_01]
SMITH, D. J. Reliability, maintainability and risk. 6th ed. Woburn, MA: Butterworth-Heinemann, 2001.
[SMIT_02]
348 p.
STAVEREN, M. van Uncertainty and ground conditions: a risk management approach. Burlington,
[STAV_01]
STEWART, M. G.; MELCHERS, R. E. Probabilistic risk assessment of engineering systems. London,
[STEW_01]
UK: Chapman & Hall, 1997.274 p.
VAUGHAN, D. The Challenger launch decision - risky technology, culture, and deviance at NASA.
[VAUG_01]
Chicago, IL: Chicago Press, 1996. 575 p.
WEICK, K. E.; SUTCLIFFE, K. M. Managing the unexpected: resilient performance in an age of
[WEIC_01]
uncertainty. 2nd ed. San Francisco, CA: John Wiley, 2007. 194 p.
ZIO, E. An introduction to the basics of reliability and risk analysis. Hackensack, NJ: World Scient
[ZIO_01]
Pub, 2007. 222 p.

2.6. Gestão de Configuração
HASS, A. M. J. Configuration management principles and practice. Boston, MA: Pearson Educ., 2003.
[JHAS_01]
370 p.
JUNIPER. JUNOSe policy management configuration guide. Release 8.1.x. Sunnyvale, CA: Juniper.
[JUNI_01]
270 p.

[KEYS_01] KEYS, J. Software configuration management. Auerbach Pub, 2004. 619 p.

KLOSTERBOER, L. Implementing ITIL configuration management. Boston, MA: Pearson Education,
[KLOS_01]
2008. 252 p.

2.7. Gestão da Garantia de Software
CHING, W. K.; NG, M. K. Markov chains: models, algorithms and applications. USA: Springer
[CHIN_01]
Science+Business Media, 2006. 212 p.
CHU, E. Discrete and continuous Fourier transforms analysis, applications and fast algorithms. Boca
[CHU_01]
Raton, FL: CRC, 2008. 423 p.
CORMEN, T. H.; LEISERSON, C. E.; RIVEST, R. L.; STEIN, C. Introduction to algorithms. 2nd ed.
[CORM_01]
USA: McGraw-Hill, 2002. 1203 p.
CORMEN, T. H.; LEE, C.; LIN, E. Instructor´s manual to accompany Introduction to algorithms. 2nd ed.
[CORM_02]
CRNCOVIC, I.; LARSSON, M.. Ed. Building reliable component-based software systems. Norwood,
[CRNC_01]
MA: Artech House, 2002. 452 p.
DALAL, S. R.; POORE, J. H.; CPHEN, M. L., ed. Innovations in software engineering for defense
[DALA_01]
systems. Washington, DC: NRC, 2003. 88 p.
DROZDEK, A. Data structure and algorithms in C++. 2nd ed. Pacific Grove, CA: Brooks/Cole, 2001.
[DROZ_01]
664 p.


ENGINEERING

ENDRES, A.; ROMBACH, D. A handbook of software and systems engineering: empirical
[ENDR_01]
observations, laws and theories. Essex, England: Pearson, 2003. 346 p.
EVERETT, G. D.; McLEOD, R. Software testing - testing across the entire software development life
[EVER_01]
cycle. Hoboken, NJ: John Wiley, 2007. 277 p.
GANSSLE, J. G. The art of designing embedded systems. Woburn, MA: Butterworth-Heinemann,
[GANS_01]
1999. 262 p.

[GEN_01] GEN, M.; CHENG, R. Genetic algorithms and engineering optimization. USA: John Wiley, 2000. 511 p.

[HAND_01] HAND, D.; MANNILA, H.; SMYTH, P. Principles of data mining. Cambridge, MA: MIT Press, 322 p.

Joint Software System Safety Committee. Software system safety handbook - a technical & managerial
[JSSS_01]
team approach. December, 1999. 247 p.

[KAN_01] KAN, S. H. Metrics and models in software quality engineering. 2nd ed. Addison-Wesley, 2002. 560 p.

KANER, C.; BACH, J.; PETTICHORD, B. Lessons learned in software testing - a context-driven
[KANE_01]
approach. New York, NY: John Wiley, 2002. 286 p.
MOURATIDIS, H.; GIORGINI, P. Integrating security and software engineering: advances and future
[MOUR_01]
visions. Hershey, PA: Idea Group Pub, 2007. 303 p.
NEGOITA, M.; NEAGU, D.; PALADE, V. Computational intelligence - engineering of hybrid systems.
[NEGO_01]
Berlin, Germany: Springer, 2005. 228 p.

[PREI_01] PREISS, B. R. Data structures and algorithms with object-oriented design patterns in Python. 2003.

[SEDG_01] SEDGEWICK, R. Algorithms. USA: Addison-Wesley, 1983. 560 P.

STOJMENOVIC, I. Handbook of sensor networks - algorithms and architectures. Hoboken, NJ: John
[STOJ_01]
Wiley, 2005. 553 p.

[WINS_01] WINSTON, W. Operations research applications and algorithms. 4th ed. 2003.

[WIRT_01] WIRTH, N. Algorithms and data structures. 1985. 179 p.

2.8. Gestão de Direitos e Penalidades de Garantias
[CABR_01] CABRAL, P. Direito autoral: dúvidas e controvérsias. São Paulo, SP: Ed. Harbra, 2000. 232 p.
[CNET_02] COSTA NETTO, J. C. Direito autoral no Brasil. 2a. ed. São Paulo, SP: Ed. FTD, 2008. 464 p.
COSTA, A., ed. exec. Anais do I Congresso Internacional da Propriedade Intelectual. São Paulo, SP:
[COST_01]
Ver. Ofic. Ed., 2003. 313 p.

2.9. Gestão da Informação e do Conhecimento
ALLEE, V. The knowledge evolution: expanding organizational intelligence. Newton, MA: Butterworth-
[ALLE_01]
Heinemann, 1997. 274 p.
ANGELONI, M. T. Organizações do conhecimento: infra-estrutura, pessoas e tecnologias. São Paulo,
[ANGE_01]
SP: Ed. Saraiva, 2002. 215 p.
COLLINS, J. C.; PORRAS, J. I Feitas para durar: práticas bem-sucedidas de empresas visionárias.
[COLL_01]
Rio de Janeiro, RJ: Rocco, 1995. 408 p.
FLEURY, M. T. L.; OLIVEIRA Jr, M. M., org. Gestão estratégica do conhecimento - integrando
[FLEU_01]
aprendizagem, conhecimento e competências. São Paulo, SP: Ed. Atlas, 2001. 349 p.
FOSTER, R.; KAPLAN, S. Destruição criativa: por que as empresas feitas para durar não são bem-
[FOST_01]
sucedidas. Como transformá-las. Rio de Janeiro, RJ: Campus, 2002. 448 p.
HARVARD Business Review. Gestão do conhecimento (on knowledge management). 2a. Ed. Rio de
[HBR_02]
Janeiro, RJ: Campus, 2000. 205 p.
KROGH, G. von; ICHIJO, K.; NONAKA, I. Facilitando a criação do conhecimento: reinventando a
[KROG_01]
empresa com o poder da inovação contínua. Rio de Janeiro, RJ: Campus, 2000. 350 p.


ENGINEERING

LÉVY, P.; AUTHIER, M. As árvores de conhecimentos. 2a. Ed. São Paulo, SP: Ed. Escuta, 2000. 188
[LÉVY_01]
p.
LÉVY, P.; A inteligência coletiva: por uma antropologia do ciberespaço. São Paulo, SP: Ed. Loyola,
[LÉVY_02]
1998.212 p.
LÉVY, P. As tecnologias da inteligência: o futuro do pensamento na era da informática. São Paulo,
[LÉVY_03]
SP: Ed. 34, 1993. 203 p.
LÉVY, P. A ideografia dinâmica: rumo a uma inteligência artificial? São Paulo, SP: Ed. Loyola,
[LÉVY_04]
1998.228 p.
LÉVY, P. A conexão planetária: o mercado, o ciberespaço, a consciência. São Paulo, SP: Ed. 34,
[LÉVY_05]
2001. 189 p.
MATURANA, H. R.; VARELA, F. J. A árvore do conhecimento: as bases biológicas da compreensão
[MATU_01]
humana. 6a. Ed. São Paulo, SP: Palas Athena, 2007. 283 p.
MORIN, E. Os sete saberes necessários à educação do futuro. 8a. Ed. São Paulo, SO: Cortez Ed.,
[MORI_01]
2003. 118 p.
MORIN, E.; ALMEIDA, M. C.; CARVALHO, E. A. Educação e complexidade: os sete saberes e outros
[MORI_02]
ensaios. São Paulo, SP: Cortez Ed., 2002. 102 p.
MORIN, E.; CIURANA, E=R.; MOTTA, R. M. Educar na era planetária: o pensamento complexo como
[MORI_03]
método de aprendizagem pelo erro e incerteza humana. São Paulo, SP: Cortez Ed., 2003. 111 p.
[MORI_04] MORIN, E. O método 1. A natureza da natureza. Porto Alegre, RS: Sulina, 2002. 479 p.
[MORI_05] MORIN, E. O método 2. A vida da vida. Porto Alegre, RS: Sulina, 2001. 528 p.
[MORI_06] MORIN, E. O método 3. O conhecimento do conhecimento. Porto Alegre, RS: Sulina, 1999. 288 p.
MORIN, E. O método 4. As idéias: habitat, vida, costumes, organização. Porto Alegre, RS: Sulina,
[MORI_07]
2001. 320 p.
MORIN, E. O método 5. A humanidade da humanidade: a identidade humana. Porto Alegre, RS:
[MORI_08]
Sulina, 2002. 312 p.
NONAKA, I.; TAKEUSHI, H. Criação do conhecimento na empresa: como as empresas japonesas
[NONA_01]
geram a dinâmica da inovação. 2a. Ed. Rio de Janeiro, RJ: Campus, 1997. 358 p.
O´DELL, C.; GRAYSON Jr, C. J.; ESSAIDES, N. Ah...se soubéssemos antes o que sabemos agora:
[ODEL_01]
as melhores práticas gerenciais ao alcance de todos. São Paulo, SP: Futura, 2000. 280 p.
STEWART, T. A. A riqueza do conhecimento - o capital intelectual e a organização do século XXI. Rio
[STEW_01]
de Janeiro, RJ: Campus, 2002. 517 p.
STEWART. T. A. Capital intelectual: a nova vantagem competitiva das empresas. 8a. Ed. Rio de
[STEW_01]
Janeiro, RJ: Campus, 1998.237 p.
SVELBY, K. E. A nova riqueza das organizações: gerenciando e avaliando patrimônios de
[SVEL_01]
conhecimento. 4a. Ed. Rio de Janeiro, RJ: Campus,1998. 260 p.
TEIXEIRA Fo., J. Gerenciando conhecimento: como a empresa pode usar a memória organizacional e
[TEIX_01] a inteligência competitiva no desenvolvimento dos negócios. Rio de Janeiro, RJ: SENAC Ed., 2000.
Acompanha CD. 191 p.
TERRA, J. C. C. Gestão do conhecimento: o grande desafio empresarial. Uma abordagem baseada
[TERR_01]
no aprendizado e na criatividade. São Paulo, SP: Negócio Ed., 2000. 283 p.
TERRA, J. C. C.; GORDON, C. Portais corporativos: a revolução na gestão do conhecimento. São
[TERR_02]
Paulo, SP: Negócio Ed., 2002. 453 p.
ZABOT. J. B. M.; SILVA, L. C. M. Gestão do conhecimento - aprendizagem e tecnologia construindo a
[ZABO_01]
inteligência coletiva. São Paulo, SP: Ed. Atlas, 2002.142 p.

2.10. Aprendizado Organizacional
ADAMS, S. O futuro Dilbert: como prosperar com a estupidez do século XXI. Rio de Janeiro, RJ:
[ADAM_01]
Ediouro, 1997.255 p.
ARGYRIS, C.; SCÖN, D. A. Organizational learning II: theory, method, and practice. Reading, MA:
[ARGY_01]
Addison-Wesley, 1996. 305 p.
BALFOUR, A.; HINGSTON, P. Como trabalhar em casa no seu próprio negócio. São Paulo, SP:
[BALF_01]
Publifolha, 2001. 192 p.


ENGINEERING

COVEY, S. R. Os 7 hábitos das pessoas muito eficazes. 26a. Ed. São Paulo. SP: Ed. Best Seller. 372
[COVE_01]
p.
COVEY, S. R. O 8º hábito: da eficácia à grandeza. Rio de Janeiro, RJ: Elsevier, 2005. Acompanha
[COVE_02]
CD. 413 p.
[COVE_03] COVEY, S. R. Liderança baseada em princípios. 5a. Ed. Rio de Janeiro, RJ: Elsevier, 2002. 343 p.
COVEY, S. R. Princípios essenciais das pessoas altamente eficazes. Rio de Janeiro, RJ: Sextante,
[COVE_04]
2004. 127 p.
DAVENPORT, T. O. Capital humano: o que é e por que as pessoas investem nele. São Paulo, SP:
[DAVE_01]
Nobel, 2001. 248 p.
DOLABELA, F. Oficina do empreendedor: a metodologia de ensino que ajuda a transformar
[DOLA_01]
conhecimento em riqueza. São Paulo, SP: Cultura Ed., 1999. 275 p.
DUDLEY, G. A. Como aprender mais: desenvolvendo suas capacidades potenciais. São Paulo, SP:
[DUDL_01]
Círculo do Livro, 1988. 209 p.
GEUS, A. de. A empresa viva: como as organizações podem aprender a prosperar e a se perpetuar.
[GEUS_01]
4a. Ed. Rio de Janeiro, RJ: Campos, 1998. 210 p.
GUNS, B. Q organização que aprende rápido: seja competitivo utilizando o aprendizado
[GUNS_01]
organizacional. São Paulo, SP: Futura, 1998.153 p.
HATELEY, B.; SCHIMIDT, W. N. Um pavão na terra dos pinguins: uma fábula empresarial de
[HATE_01]
descobrimentos e diferenças. 2a. Ed. São Paulo, SP: Negócio Ed., 1998.141 p.
HEIJDEN, K. van der; BRADFIELD, R.; BURT, G.; CAIRNS, G. WRIGHT, G. The sixth sense:
[HEIJ_01] accelerating organizational learning with scenarios. Chichester, West Sussex, UK: John Wiley, 2002.
307 p.
HUTCHENS, D. Aprendendo além dos lobos: sobrevivendo e prosperando na organização que
[HUTC_01]
aprende. São Paulo, SP: Best Seller, 1999. 70 p.
KRAUSZ, R. R. Homens e organizações: adversários ou colaboradores? Análise transacional aplicada
[KRAU_01]
às organizações. 2a. Ed. São Paulo, SP: Nobel, 1981. 178 p.
SEAGAL, S.; HORNE, D. Human Dynamics: um novo contexto para compreender pessoas e realizar o
[SEAG_01]
potencial de nossas organizações. Rio de Janeiro, RJ: Qualymark, 1999. 380 p.
SENGE, P. M. A quinta disciplina: arte e prática da organização que aprende. A nova e revolucionária
[SENG_01] concepção de liderança e gerenciamento empresarial. 8a. Ed. São Paulo, SP: Ed. Best Seller, 2001.
441 p.
SENGE, P. M. A quinta disciplina - caderno de campo: estratégias e ferramentas para construir uma
[SENG_02]
organização que aprende. Rio de Janeiro, RJ: Qualitymark Ed., 2000. 543 p.
SERRA, F. Curso básico de análise transacional - com testes e exercícios práticos. Rio de Janeiro,
[SERF_01]
RJ: Tecnoprint, 1979. 124 p.
USEEM, M. O momento de liderar: nove histórias reais sobre triunfos e catástrofes e suas lições para
[USEE_01]
todos nós.São Paulo, SP: Negócio Ed., 1999. 319 p.
WOOD, L. E. Estratégias do pensamento: técnicas de aptidão mental. São Paulo, SP: Círculo do
[WOOD_01]
Livro, 1989. 195 p.

2.11. Criatividade e Inovação
ALTSHULLER, G. And suddenly the inventor appeared: TRZ, the Theory of Inventive Problem Solving.
[ALTS_01]
Worcester, MA: TIN, 1996. 173 p.
BONO, E. de. Criatividade levada a sério: como gerar idéias produtivas através do pensamento lateral.
[BONO_01]
Uma abordagem passo a passo à criatividade.São Paulo, SP: Pioneira Ed., 1992. 325 p.
CHRISTENSEN, C. M. The innovators dilemma: when new technologies cause great forms to fall.
[CHRI_01]
Boston, MA: HBS Press, 1997.225 p.
[DMAS_07] DE MASI, D. Criatividade e grupos criativos. Rio de Janeiro, RJ: Sextante, 2003. 795 p.
KATZ, L. C.; RUBIN, M. Mantenha seu cérebro vivo: exercícios neuróbicos para ajudar a preservar a
[KATZ_01] perda de memória e aumentar a capacidade mental. 7a. Ed. Rio de Janeiro, RJ: Sextante, 2000. 160
p.


ENGINEERING

KELLEY, T.; LITTMAN, J. A arte da inovação: noções de criatividade da IDEO, a maior empresa norte-
[KELL_01]
americana de design. São Paulo, SP: Futura, 2001. 341 p.
MAXIMIANO, A. C. A.; et al. Administração do processo de inovação tecnológica. São Paulo, SP:
[MAXI_01]
Atlas, 1980. 384 p.
MICHAUD, E.; WILD, R. Boost your brain power: a total program to strengthen and expand your most
[MICH_01]
important resource. New York, NY: MJF Books, 1991.471 p.
MOSER-WILLMAN, A. Cinco faces de um gênio: como descobrir e desenvolver a genialidade e a
[MOSE_01]
criatividade humana. São Paulo, SP: Alegro, 2001.248 p.
PEIRCE, P. O caminho da intuição: um guia para a sabedoria interior. São Paulo, SP: Mercuryo,
[PEIR_01]
1999.286 p.
PERKINS, D. A banheira de Arquimedes: como os grandes artistas e cientistas usaram a criatividade,
[PERK_01]
e como você pode desenvolver a sua. Rio de Janeiro, RJ: Ediouro, 2001. 337 p.
[RAUD_01] RAUDSEPP, E. Arte de apresentar idéias novas. 2a. Ed. Rio de Janeiro, RJ: FGV Ed., 1975. 121 p.
[SILE_01] SILER, T. Pense como um gênio. Rio de Janeiro, RJ: Ediouro, 1999. 239 p.
SIMONTON, D. K. A origem do gênio: perspectivas darwinianas sobre a criatividade. Rio de Janeiro,
[SIMO_01]
RJ: Record, 2002. 418 p.
STOKES, D. E. O quadrante de Pasteur: a ciência básica e a inovação tecnológica. Campinas, SP:
[STOK_01]
Ed. UNICAMP, 2005. 246 p.
[YOUN_01] YOUNG, J. B. Técnica para a produção de idéias. São Paulo, SP: Nobel, 1994. 73 p.

2.12. Inteligência Tecnológica e Competitiva
GILAD, B. Early warning: using competitive intelligence to anticipate market shifts, control risc, and
[GILA_01]
create powerful strategies. New York, NY: Amacom, 2004. 268 p.
KAHANER, L. Competitive intelligence: how to gather, analyze, and use information to move your
[KAHA_01]
business to the top. New York, NY: Touchstone, 1996. 300 p.
[SERR_01] SERRA, L. A essência do business intelligence. São Paulo, SP: Ed. Berkeley, 2002. 288 p.


ENGINEERING

3. REFERÊNCIAS SOBRE ENGENHARIA DE PDI & GSP
3.1. Engenharia de Sistemas
ALEXIOU, K.; JOHSON, J.; ZAMENOPOULUS, T. ed. Embracing complexity in design. Abingdon, UK:
[ALEX_01]
Routledge, 2010. 233 p.
ARMSTRONG, J. Design matters: the organization and principles of engineering design. London, UK:
[ARMS_01]
Springer Verlag, 2008. 164 p.

[ASHB_01] ASHBY, W. R. An introduction to cybernetics. London, UK: Chapman & Hall, 1999. 294 p.

[BERT_01] BERTALANFFY, Ludwig von. Teoria geral dos sistemas. Petrópolis, RJ: Ed. Vozes, 1973. 351 p.
[BLAN_01] BLANCHARD, B. S. System engineering management. 4th ed. Hoboken NJ: John Wiley, 2008. 539 p.
BOFFI, L. V.; COUTINHO, J. A. M. Elementos de análise de sistemas lineares. São Paulo, SP:
[BOFF_01]
ETEGIL, 1966. 258 p.

[BRUE_01] BRUEKNER, S. A., et al. Engineering self-organizing systems. Berlin, Germany: Springer, 2007. 219 p.

[CEDT_01] CEDTI. System analysis and design. Module 2.1. New Delhi, India: 1999. 48 p.

[CHEN_01] CHENG, David K. Analysis of linear systems. Tokyo, Japan: Addison-Wesley, 1963. 431 p.
[CHUR_01] CHURCHMAN, C. W. Introdução à teoria dos sistemas. 2ª ed. Petrópolis, RJ: Ed. Vozes, 1972. 309 p.

[DITT_01] DITTMAN, B. W. Systems analysis and design methods.

[DOD_01] DoD. Systems engineering fundamentals. Fort Belvoir, VA: US DOD, 2001. 222 p.

DORF, R. C., ed. Systems, controls, embedded systems, energy, and machines. The Electrical
[DORF_01]
Engineering Handbook. 3rd ed. Boca Raton, FL: CRC, 2006. 672 p.
DUBOIS, E.; GRAY, P.; NIGAY, L., ed. The engineering of mixed reality systems. London, UK:
[DUBO_01]
Springer, 2010. 445 p.
ELLEITHY, K. Advances and innovations in systems, computing sciences and software engineering.
[ELLE_01]
Dordrecht, The Netherlands: Springer, 2007. 569 p.
ELLEITHY, K.; et al. Advances in computer, information and systems science and engineering.
[ELLE_02]
Dordrecht, The Netherlands: Springer, 2006. 466 p.
HITCHINS, D. Systems engineering - a 21st century systems methodology. Chichester, England: John
[HITC_01]
Wiley, 2007. 532 p.
HOPGOOD, A. A. Intelligent systems for engineers and scientists. 2nd ed. Boca Raton, FL: CRC,
[HOPG_01]
2001. 460 p.
KASSER, J. E. A framework for understanding systems engineering. Bedfordshire, UK: Te Right Req.,
[KASS_01]
2007.
KLUGER, Jeffrey. Simplexity: why simple things become complex (and how complex things can be
[KLUG_01]
made simple). New York, KY: Hyperion, 2008.324 p.
KOPETZ. H. Real-time systems: design principles for distributed embedded applications. USA: Kluwer,
[KOPE_01]
2002. 353 p.
KOSSIAKOFF, A.; SWEET, W. N. Systems engineering: principles and practices. Hoboken, NJ: John
[KOSS_01]
Wiley, 2003. 463 p.
KROGSTIE, J.; OPDAHL, A. L.; BRINKKEMPER, S., eds. Conceptual modeling in information systems
[KROG_01]
engineering. Berlin, Germany: Springer-Verlag, 2007. 354 p.
[MACI_01] MACIEL, Jarbas. Elementos de teoria geral de sistemas. Petrópolis, RJ: Ed. Vozes, 1974. 147 p.
MACIEJOWSKI, J. The modeling of systems with small observation sets. Berlin, Germany: Springer,
[MACJ_01]
1978. 248 p.
MEADOWS, D. H. Thinking in systems: a primer. White River Junction, VT: Chelsea Green Pub, 2008.
[MEAD_01]
218 p.
MENDONÇA, Fernando de. Engenharia de sistemas: planejamento e controle de projetos. 2ª ed.
[MEND_01]
Petrópolis, RJ: Ed. Vozes, 1972. 307 p.


ENGINEERING

[MITC_01] MITCHELL, Melanie. Complexity - a guided tour. New York, NY: Oxford Univ. Press, 2009. 349 p.
NASA. Systems engineering handbook NASA/SP-2007-6105 Rev1. Washington, DC: NASA, 2007.
[NASA_01]
360 p.
[RBART_01] BARTON, Richard F. Manual de simulação e jogo. Petrópolis, RJ: Ed. Vozes, 1973. 285 p.
SYDENHAM, P. H. Systems approach to engineering design. Norwood, MA: Artech House, 2004. 351
[SYDE_01]
p.

[TRIP_01] TRIPATHI, A. N. Linear systems analysis. 2nd ed. New Delhi, India: New Age, 1998. 322 p.

WASSON, C. S. System analysis, design and development: concepts, principles and practices..
[WASS_01]
Hoboken, NJ: John Wiley, 2006. 818 p.
WEILKIENS, T. Systems engineering with SysML-UML. Burlington, MA: Morgan Kaufmann, 2006. 313
[WEIL_01]
p.
YEATES, D.; WAKEFIELD, T. Systems analysis and design. 2nd ed. Harlow, England: Prentice Hall,
[YEAT_01]
2004. 518 p.

3.2. Engenharia de Requisitos

AKAO, Yoji, Editor. QFD - Quality function deployment - integrating customer requirements into
[AKAO_01]
product design. New York, NY: Productivity Press, 1990. 369 p.

ALEXANDER, I. F.; STEVENS, R. Writing better requirements. Harlow, UK: Pearson Education, 2002.
[ALEX_01]
159 p.

[COCK_01] COCKBURN, Alistair. Writing effective use cases. Indianapolis, IN: Addison-Wesley, 2001. 270 p.

DeVELLE, J. B.; MORAN, J. M.; COX, C. A. The QFD handbook. New York, NY: John Wiley, 1998.
[DeVE_01]
410 p.

GAUSE, D. C.; WEINBERG, G. M. Exploring requirements - quality before design. New York, NY:
[GAUS_01]
Dorset House, 1989. 299 p.

[GRAD_01] GRADY, J. O. System requirements analysis. Burlington, MA: Elsevier, 2006. 455 p.

HATLEY, D.; HRUSCHKA, P.; PIRBAHAI, I. Process for system architecture and requirements
[HATL_01]
engineering. New York, NY: Dorset House, 2000. 434 p.

HOSSENLOPP, Rosemary; HASS, Kathleen B. Unearthing business requirements: elicitation tools and
[HOSS_01]
techniques. Vienna, VA: Management Concepts, 2008.211 p.

HULL, E.; JACKSON, K.; DICK, J. Requirements engineering. 2nd ed. Antrim, UK: Springer-Verlag,
[HULL_01]
2004. 198 p.

WIEGERS, K. E. Software requirements: practical techniques for gathering and managing
[WIEG_01] requirements throughout the product development cycle. 2nd ed. Redmont, USA: Microsoft Press,
2003. 516 p.

WIEGERS, K. E. More about software requirements: thorny issues and practical advice. 2nd ed.
[WIEG_02]
Redmont, USA: Microsoft Press, 2006. 224 p.

[YOUN_01] YOUNG, R. R. The requirements engineering handbook. Norwood, MA: Artech, 2004. 254 p.


ENGINEERING

3.3. Engenharia de Garantia da Qualidade
ALLEN, T. T. Introduction to engineering statistics and Six Sigma - statistical quality control and design
[ALLE_01]
of experiments and systems. London, UK: Springer, 2006. 532 p.
ASM International. Nondestructive evaluation and quality control. ASM Handbook, Vol 17. 1998. 1608
[ASMI_01]
p.
BHOTE, Keki R.; BHOTE, Adi K. World class quality: using design of experiments to make it happen.
[BHOT_02]
2nd ed. USA: AMACOM, 2000. 487 p.

[DHIL_01] DHILLON, B. S. Reliability, quality, and safety for engineers. USA: CRC Press, 2005. 217 p.

FEIGENBAUN, A. V. Total quality control - engineering and management. USA: McGraw-Hill, 1961.
[FEIG_01]
627 p.
HOYLE, D. Automotive quality systems handbook. Woburn, MA: Butterworth-Heinemman, 2000. 592
[HOYL_01]
p.
JOHN, P. W. M. Statistical methods in engineering and quality assurance. USA: John Wiley, 1990. 387
[JOHN_01]
p.
JURAN, J. M.; GRYNA, F. M.; BINGHAM, R. S. Quality control handbook. 3rd ed. USA: McGraw-Hill,
[JURA_01]
1974.
[JURA_02] JURAN, J. M. Managerial breakthrough. USA: McGraw-Hill, 1964. 396 p.
JURAN, J. M.; GRYNA, F. M. Quality planning and analysis. New Delhi: Tata McGraw-Hill, 1970. 684
[JURA_03]
p.
[JURA_04] JURAN, J. M.; GRYNA, F. M. Planificación y análisis de la calidad. Barcelona: Reverté, 1977, 736 p.
THE PRODUCTIVITY PRESS DEVELOPMENT TEAM. Mistake-proofing for operators: the ZQC
[PPDT_01]
system. New York, NY: Productivity Press, 1997. 80 p.

[PYZD_01] PYZDEK, T. Quality engineering handbook. 2nd ed. New York, NY: Marcel Dekker, 2003. 714 p.

ROSE, K. H. Project quality management: why, what and how. Fort Lauderdale, FL: J. Ross Pub,
[ROSE_01]
2005. 173p.
TAGUCHI, G.; CHOWDHURI, S.; TAGUCHI, S. Robust engineering: learn how to boost quality while
[TAGU_01]
reducing costs & time to market. USA: McGraw-Hill, 2000.239 p.
TAVENAS, F. Quality assurance: a reference system for indicators and valuation procedures.
[TAVE_01]
Brussels, Belgium: European University Association, 2004. 54 p.

3.4. Engenharia de Garantia de Confiabilidade
[ALI_01] ALI, S. r. Digital switching systems - system reliability and analysis. USA: McGraw-Hill, 174 p.
ANDERSON, B.; FAGERHAUG, T. Root cause analysis: simplified tools and techniques. 2nd ed.
[ANDB_01]
Milwaukee, WI: ASQ Press, 2006. Includes CD. 223 p.
ANDERSON, R. T. RDH 376: Reliability design handbook. 4th print. Rel. Anal. Center. Chicago, IL:
[ANDE_01]
ITT Res. Inst, 1975. 392 p.
[BARL_01] BARLOW, R. E. Engineering reliability. Philadelphia, PA: ASA, 1998.221 p.
[BAZO_01] BAZOVSKY, Igor. Reliability theory and practice. Mineola, NY: Dover Pub., 2004. 292 p.
BENBOW, D. W.; BROOME, H. W. The certified reliability engineer handbook. Milwaukee, WI: ASQ,
[BENB_01]
2009. Includes CD. 305 p.
BERSTSCHE, B. Reliability in automotive and mechanical engineering. Berlim Heidelberg, Germany:
[BERT_01]
Verlag, 2008. 492 p.
BHOTE, Keki R.; BHOTE, Adi K. World class reliability: using multiple environment overstress tests to
[BHOT_01]
make it happen. USA: AMACOM, 2004. 218 p.
BILLINTON, R.; ALLAN, R. N. Reliability evaluation of power systems. 2nd ed. New York, NY:
[BILL_01]
Plenum Press, 1996. 534 p.
BLISCHKE, W. R.; MURTHY, D. H. P. Case studies in reliability and maintenance. Hoboken, NJ:
[BLIS_01]
John Wiley, 2003. 661 p.
BLOCH, H. P. Practical machinery management for process plants - Vol1- Improving machinery
[BLOC_01]
reliability. 3rd ed. Burlington, MA: Elsevier, 1998. 710 p.


ENGINEERING

BROWN, R. E. Electric power distribution reliability. 2nd ed. Boca Raton, FL: CRC Press, 2009. 453
[BROW_01]
p.
[CLUL_01] CLULEY, J. C. Electronic equipment reliability. New York, NY: John Wiley, 1974. 161 p.
[COX_01]
[CROE_01] CROWE, D.; FEINBERG, A. Design for reliability. Boca Raton, FL: CRC Press, 2001. 220 p.
DAILAY, K. W. The FMEA pocket handbook: failure mode and effects analysis. USA: DW Pub, 2004.
[DAIL_01]
40 p.
DHILLON, B. S. Maintainability, maintenance, and reliability for engineering. Boca Raton, FL: CRC
[DHIL_02]
Press, 2006. 214 p.
[DHIL_03] DHILLON, B. S. Design reliability - fundamentals and applications. USA: CRC Press, 1999. 397 p.
DHILLON, B. S. Engineering maintainability: how to design for reliability and easy maintenance. USA:
[DHIL_04]
Elsevier, 1999. 257 p.
DING, S. X. Model-based fault diagnosis techniques: design schemes, algorithms, and tools. Berlin
[DING_01]
Heidelberg: Springer-Verlag, 2008.473 p.
DÖRNER, Dietrich. The logic of failure: recognizing and avoiding error in complex situations. New
[DORN_01]
York, NY: Metropolitan Books, 1996. 22 p.
EBELING, C. E. An introduction to reliability and maintainability engineering. 2nd ed. Long Grove, IL:
[EBEL_01]
Waveland Press, 2010. Includes CD. 544 p.
EBELING, C. E. Ebeling Studente CD. An introduction to reliability and maintainability engineering,
[EBEL_02]
2nd Ed.
GANO, D. L. Apollo root cause analysis - a new way of thinking: effective solutions to everyday
[GANO_01]
problems every time. 3rd ed. Richland, WA: Apollonian Pub., 2008. 206 p.
AICE. Guidelines for improving plant reliability through data collection and analysis - Chap 00:
[GIPR_00]
Contents. New York, NY: AICE, 1998.
[GIPR_01]
Introduction. New York, NY: AICE, 1998.
[GIPR_02]
Definitions. New York, NY: AICE, 1998.
[GIPR_03]
Methods of Analysis. New York, NY: AICE, 1998.
[GIPR_04]
Example Applications. New York, NY: AICE, 1998.
AICE. Guidelines for improving plant reliability through data collection and analysis - Chap 05: Data
[GIPR_05]
Structure. New York, NY: AICE, 1998.
AICE. Guidelines for improving plant reliability through data collection and analysis - Chap 06: Quality
[GIPR_06]
Assurance of Data. New York, NY: AICE, 1998.
AICE. Guidelines for improving plant reliability through data collection and analysis - App I: Guidelines
[GIPR_A1]
for Data Collection and Submission. New York, NY: AICE, 1998.
AICE. Guidelines for improving plant reliability through data collection and analysis - App II: Sample
[GIPR_A2]
Pick Lists for Data Fields. New York, NY: AICE, 1998.
AICE. Guidelines for improving plant reliability through data collection and analysis - App III:
[GIPR_A3]
Procedure for Developing System-Level Taxonomies. New York, NY: AICE, 1998.
AICE. Guidelines for improving plant reliability through data collection and analysis - Index. New York,
[GIPR_In]
NY: AICE, 1998.
AICE. Guidelines for improving plant reliability through data collection and analysis - Preface. New
[GIPR_Pref]
York, NY: AICE, 1998. 5p.
GNEDENKO, B. V.; USHAKOV, I. A. Probabilistic reliability engineering. USA: John Wiley, 1995. 518
[GNED_01]
p.
HEYNMAN, J. S. Electronics reliability and measurement technology - nondestructive evaluation.
[HEYN_01]
Park Ridge, NJ: Noyes, 1988. 140 p.
HNATEK, E. R. Practical reliability of electronic equipment and products. New York, NY: Marcel
[HNAT_01]
Dekker, 2003. 440 p.
HOLLNAGEL, E.; WOODS, D. D.; LAVESON, N. Resilience engineering: concepts and precepts.
[HOLL_01]
Farnham, England: Ashgate, 2006. 397 p.
IAEA-TECDOC-952: Advanced control systems to improve nuclear power plant reliability and
[IAEA_01]
efficiency. Vienna, Austria:


ENGINEERING

IEEE Recommended practice for design of reliable industrial and commercial power systems. IEEE
[IEEE_01]
Std 493-2007. New York, NY: IEEE, 2007. 383 p.
IRESON, W. G.; COOMBS Jr., C. F.; MOSS, R. Y. Handbook of reliability engineering and
[IRES_01]
management. 2nd ed. USA: McGraw-Hill, 1996.
ISERMANN, R. Fault-diagnosis systems - an introduction from fault detection to fault tolerance. Berlin
[ISER_01]
Heidelberg: Springer-Verlag, 2006. 475 p.
[KOLO_01] KOLOWROSCKI, K. Reliability of large systems. Kidlington, Oxford, uk: Elsevier, 2004. 359 p.
[KORE_01] KOREN, Israel; KRISHNA, C. Mani. Fault-tolerant systems. San Francisco, CA: Elsevier, 2007. 378 p.
LEVIN, Mark A.; KALAL, Ted T. Improving product reliability: strategies and implementation. Southern
[LEVI_01]
Gate, Chicester, West Sussex, England: John Wiley, 2003. 313 p.
McDERMOTT, R. E.; MIKULAK, R. J,; BEAUREGARD, M. R. The basics of FMEA. 2nd ed. New
[McDER_01]
York, NY: Taylor & Francis, 2009. 91 p.
McDONALD, M.; MUSSON, R.; Smith, R. The practical guide to defect prevention: techniques to
[McDON_01]
meet the demand for more-reliable software. Redmont, WA: Microsoft Press, 2008. 448 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 00. New York, NY:
[McLY_00]
Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 01: Transformer
[McLY_01]
and Inductor Design Philosophy. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 02: Magnetic
[McLY_02]
Materials. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 03: Magnetic
[McLY_03]
Cores. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 04: Window
[McLY_04]
Utilization, Magnet Wire, and Insulation. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 05: Coil Winding
[McLY_05]
Layer, Foil, and Toroidal. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 06: Soldering and
[McLY_06]
Magnet Wire Terminations. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 07: Packaging,
[McLY_07]
Enclosures, Mounts, and Headers. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 08: Polymeric
[McLY_08]
Impregnate, Embedment, and Adhesives. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 09: High Voltage
[McLY_09]
Design Guidelines. New York, NY: Marcel Dekker, 2002. 21 p.
McLYMAN, W. T. High reliability magnetic devices - design and fabrication - Chap 10: Testing,
[McLY_10]
Evaluation, and Quality Assurance. New York, NY: Marcel Dekker, 2002. 21 p.
[MOBL_01] MOBLEY, R. K. Root cause failure analysis. Woburn, MA: Butterworth-Heinemann, 1999. 325 p.
MOBLEY, R. K. Root cause failure analysis - Vibration fundamentals. Woburn, MA: Butterworth-
[MOBL_02]
[NAKA_01] NAKAGAWA, T. Maintenance theory of reliability. USA: Springer-Verlag, 2005. 269 p.
NIKOLAIDIS, E.; GHIOCEL, D. M.; SINGHAL, S. Engineering design reliability handbook. USA: CRC
[NIKO_01]
Books, 2005.474 p.
O´CONNOR, Patrick D. T.; NEWTON, David; BROMLEY, Richard. Practical reliability engineering.
[OCON_01]
4th ed. Chicester, UK: John Wiley, May 2008. 513 p.
O´CONNOR, Patrick D. T. Practical reliability engineering: solutions manual. 4th ed. Chicester, UK:
[OCON_02]
John Wiley, Feb 2008. 75 p.
OHRING, M. Reliability and failure of electronic materials and devices. Chestnut Hill, MA: Academic
[OHRI_01]
Press, 1998.
PERKINS, A.; SITARAMAN, S. Solder joint reliability prediction for multiple environments. New York,
[PERK_01]
NY: Springer, 2009. 202 p.
PETROSKI, H. Success through failure: the paradox of design. Princeton, NJ: Princeton Univ Press,
[PETR_01]
2006. 235 p.
PETROSKI, H. To engineer is human: the role of failure in successful design. New York, NY: Vontage
[PETR_02]
Books, 1992. 251 p.
[PHAM_01] PHAM, H. Handbook of reliability engineering. London, UK: Springer, 2003. 696 p.
[SHOO_01] SHOOMAN, M. L. Reliability of computer systems and networks: fault tolerance, analysis, and design.


ENGINEERING

New York, NY: John Wiley, 2002. 528 p.
SMITH, D. J. Reliability, maintainability and risk: practical methods for engineers. 5th ed. Woburn,
[SMIT_01]
[SMIT_02]
348 p.
TAGUCHI, G.; CHOWDHURI, S.; TAGUCHI, S. Robust engineering: learn how to boost quality while
[TAGU_01]
reducing costs & time to market. USA: McGraw-Hill, 2000.239 p.
TU, K. Solder joint technologies - materials, properties and reliability. New York,NY: Springer, 2007.
[TUK_01]
373 p.
[USHA_01] USHAKOV, I. A. Handbook of reliability engineering. Hoboken, NJ: John Wiley, 1994. 663 p.
[WEIC_01]
XIE, M.; DAI, Y.; POH, K. Computing systems reliability - models and analysis. New York, NY:
[XIE_01]
Kluwer, 2004. 308 p.
[YANG_01] YANG, Guangbin. Life cycle reliability engineering. Hoboken, NJ: John Wiley, 2007. 517 p.
ZIO, E. An introduction to the basics of reliability and risk analysis. Hackensack, NJ: World Scient
[ZIO_01]
Pub, 2007. 222 p.

3.5. Engenharia de Dependabilidade de Sistemas
ARAI, E.; ARAI, T. Mechatronics for safety, security and dependability in a new era. London, uk:
[ARAI_01]
BESNARD, D.; GACEK, C.; JONES, C. B. Structure for dependability: computer-based systems from
[BESN_01]
an interdisciplinary perspective. London, England: Springer-Verlag, 2006. 305 p.
COLNARIK, M.; VERBER, D.; HALANG, W. A. Distributed embedded control systems: improving
[COLN_01]
dependability with coherent design. London, England: Springer-Verlag, 2008. 250 p.


HASSELBRING, Wilhelm; GIESECKE, Simon. Dependability engineering. Berlin, Germany: GITO-
[HASS_01]
Verlag, 2006. 196 p.


ENGINEERING

3.6. Engenharia de Mantenabilidade
BLANCHARD, B. S.; VERNA, D.; PETERSON, E. L. Maintainability: a key to effective serviceability
[BLAN_02]
and maintenance management. New York, NY: John Wiley, 1995. 537 p.
BLISCHKE, W. R.; MURTHY, D. H. P. Case studies in reliability and maintenance. Hoboken, NJ: John
[BLIS_01]
Wiley, 2003. 661 p.
DHILLON, B. S. Maintainability, maintenance, and reliability for engineering. Boca Raton, FL: CRC
[DHIL_02]
Press, 2006. 214 p.
DHILLON, B. S. Engineering maintainability: how to design for reliability and easy maintenance. USA:
[DHIL_04]
DONALD, L.; LONDON, S. S.; CHELLIS, J. Sybex 2003 Environment management and maintenance.
[DONA_01]
Alameda, CA: Sibex, 2003. 624 p.
EBELING, C. E. An introduction to reliability and maintainability engineering. 2nd ed. Long Grove, IL:
[EBEL_01]
Waveland Press, 2010. Includes CD. 544 p.
EBELING, C. E. Ebeling Studente CD. An introduction to reliability and maintainability engineering, 2nd
[EBEL_02]
Ed.
EDWARDS, J.; BRAMANTE, R. OSI, TCP/IP, LANs, MANs, WANs: implementation, management, and
[EDWA_01]
maintenance. Indianapolis, IN: Wiley, 2009. 867 p.

[GROS_01] GROSS, J. M. Fundamentals of preventive maintenance. USA: AMACOM, 2002. 237 p.

KELLY, A. Maintenance systems and documentation. Burlington, MA: Butterworth-Heinemann, 2006.
[KELL_01]
255 p.
KIAMEH, P. Electrical equipment handbook: troubleshooting and maintenance. USA: McGraw-Hill,
[KIAM_01]
2004. 496 p.
KIAMEH, P. Power generation handbook: selection, applications, operation, and maintenance. USA:
[KIAM_02]
McGraw-Hill, 2004. 492 p.
MOBLEY, R. K.; HIGGINS, L. R.; WIKOFF, D. J. Maintenance engineering handbook. 7th ed. USA:
[MOBL_01]
McGraw-Hill, 2008. 1244 p.

[MOBL_02] MOBLEY, R. K. Maintenance fundamentals. 2nd ed. Jordan Hill, Oxford: Elsevier, 2004. 425 p.

[NAKA_01] NAKAGAWA, T. Maintenance theory of reliability. USA: Springer-Verlag, 2005. 269 p.

[NASA_01] NASA. RCM guide for facilities and collateral equipment. Feb, 2000. 356 p.

[PALM_01] PALMER, R. D. Maintenance planning and scheduling handbook. USA: McGraw-Hill, 1999. 560 p.

PROCURSOS. DT-7 Serviços de manutenção em motores de alta tensão, corrente contínua,
[PROC_01]
geradores e serviços. 139 p.
SMITH, D. J. Reliability, maintainability and risk: practical methods for engineers. 5th ed. Woburn, MA:
[SMIT_01]
Butterworth-Heinemann, 2000. 313 p.
[SMIT_02]
348 p.
VASCONCELOS, L. Hardware total: tudo sobre hardware, montagem, manutenção, expansões e
[VASC_01]
arquitetura de PCs. Makron Book. 1503 p.
VIANA, H. R. G. PCM: planejamento e controle de manutenção. Rio de Janeiro, RJ: Qualitymark,
[VIAN_01]
2006. 182 p.


ENGINEERING

3.7. Engenharia de Segurança de Sistemas
[ARAI_01]
BAHR, Nicholas J. System safety engineering and risk assessment: a practical approach. New York,
[BAHR_01]
CADICK, J.; CAPELLI-SCHELLPFEFFER, M.; NEITZEL, D. K. Electrical safety handbook. 3rd ed.
[CADI_01]
CHILES, J.R. Inviting Disaster: Lessons From the Edge of Technology. New York, NY: HarperCollins
[CHIL_01]
Pub, 2002. 338 p.
[COX_01]
CSAO Construction Safety Association of Ontario. Hoisting and rigging safety manual. 4th printing.
[CSAO_01]
Etobicoke, Ontario: CSAO, 2000. 191 p.
CSAO Construction Safety Association of Ontario. Safety for the small contractor. Etobicoke, Ontario:
[CSAO_02]
CSAO, 1997. 16 p.
CSAO Construction Safety Association of Ontario. Safety toolkit. Etobicoke, Ontario: CSAO, 2005. 41
[CSAO_03]
p.
[DEKK_01] DEKKER, S. The field guide to understanding human error. Burlington, VT: Ashgate Pub, 2006. 236 p.
U.S. Department of Energy. DOE-HDBK-1100-2004: Chemical process hazards analysis. Washington,
[DOE_02]
DC: 2004. 90 p.
[DOE_03] U.S. Department of Energy. DOE-HDBK-1092-98: Electrical safety. Washington, DC: 1998. 324 p.
ERICSON II, Clifton A. Hazard analysis techniques for system safety. Hoboken, NJ: John Wiley, 2005.
[ERIC_01]
499 p.
HALLINAN, J. T. Why we make mistakes: how we look without seeing, forget things in seconds, and
[HALL_01]
are all pretty sure we are way above average. New York, NY: Broadway Books, 2009. 283 p.
HOLNICKI-SZULC, J. Smart technologies for safety engineering. Chichester, UK: John Wiley, 2008.
[HOLN_01]
338 p.
Joint Software System Safety Committee. Software system safety handbook - a technical & managerial
[JSSS_01]
team approach. December, 1999. 247 p.
LICHT WISSEN. Good lighting for safety on roads, paths and squares. Frankfurt am Main, Germany.
[LICH_01]
44 p.
MARTIN, W.F.; LIPPITT. J. M.; WEBB, P. J. Hazardous waste handbook for health and safety. 3rd ed.
[MART_01]
Woburn, MA: Butterworth–Heinemann, 2000. 262 p.
NOLAN, D. P. Application of HAZOP and What-If safety reviews to the petroleum, petrochemical &
[NOLA_01]
chemical industries. Park Ridge, NJ: Noyes, 1994. 130 o.
PLUVINAGE, G.; SEDMAK, A. Security and reliability of damaged structures and defective materials.
[PLUV_01]
Dordrecht: Springer, 2008. 419 p.
PURKISS, J. A. Fire safety engineering design of structures. Jordon Hill, Oxford: Butterworth-
[PURK_01]
SAGAN, S. D. The limits of safety - organizations, accidents and nuclear weapons. Princeton, NJ:
[SAGA_01]
Princeton Univ Press, 1993.286 p.
SMITH, D. J.; SIMPSON, K. G. Functional safety: a straightforward guide to applying IEC 61508 and
[SMIT_01]
related standards. 2nd ed. Burlington, MA: Elsevier, 2004. 276 p.
[VINC_01] VINCOLI, J. W. Basic guide to system safety. 2nd ed. Hoboken, NJ: John Wiley, 2006. 224 p.

3.8. Engenharia de Proteção de Sistemas
ABB. Protection application handbook - THS_BU Transmission systems and substations. Västerås,
[ABB_01]
Sweden: 1999. 356 p.

[ALST_01] ALSTOM. Transformer protections. 14 P.

ANDERSON, R. J. Security engineering: a guide to building dependable distributed systems. 2nd ed.
[ANDR_01]
Indianapolis, IN: Wiley Pub., 2008. 1040 p.
ANDERSON, R. Security engineering: a guide to building dependable distributed systems.
[ANDR_02]
Indianapolis, IL: John Wiley, 2001. 600 p.


ENGINEERING

[ARAI_01]
BUSSMAN. Electrical protection handbook - seleting protective devices based on the National Electric
[BUSS_01]
Code. 1998. 124 p.
DAVIES, T. Protection of industrial power systems. 2nd ed. Burlington, MA: Elsevier, 1996/2006. 245
[DAVI_01]
p.

[ELDI_01] ELDIN, A. S. Practical introduction to power system protection and control. 2005. 94 p.

HERRMANN, D. S. Practical guide to security engineering and information assurance. USA: CRC
[HERR_01]
Press, 2002. 386 p.
HEWWITSON, L.; BRPWN, M.; RAMESH, B. Practical power systems protection. Burlington, MA:
[HEWI_01]
JONES, A.; ASHENDEN, D. Risk management for computer security: protecting your network and
[JONA_01]
information assets. Oxford, UK: Elsevier, 2005. 297 p.

[MASO_01] MASON, C. R. The art and science of protective relays. GE: 357 p.

MOURATIDIS, H.; GEORGINI, P. Integrating security and software engineering: advances and future
[MOUR_01]
visions. Hershey PA: IGP, 2007. 303 p.
MOURATIDIS, H.; GIORGINI, P. Integrating security and software engineering: advances and future
[MOUR_01]
visions. Hershey, PA: Idea Group Pub, 2007. 303 p.
MOUTATIDIS, H./ GIORGINI, P. Integrating security and software engineering: advances and future
[MOUT_01]
vision. Hershey, PA: Idea Group, 2007. 303 p.

[PREV_01] PRÉVÉ, C. Protection of electrical networks. Newport Beach, CA: ISTE, 2006. 508 p.

QIAN, Y.; JOSHI, J.; TIPPER, D.; KRISHNAMURTHY, P. Information assurance dependability and
[QIAN_01]
security in networked systems. Burlington, MA: Elsevier, 2008. 553 p.
SCHNEIER, Bruce. Secrets & lies: digital security in a networked world. With new information about
[SCHN_01]
post-9/11 security. Indianapolis, IN: Wiley Pub., 2004. 414 p.
SCHUMACKER, M., et al. Security patterns - integrating security and systems engineering. Chichester,
[SCHU_01]
England: John Wiley, 2006. 604 p.

[SGAR_01] SGARRO, Andrea. Códigos secretos. São Paulo, SP: Ed. Melhoramentos, 1994. 137 p.

3.9. Engenharia de Fatores Humanos
CSNI. Assessing human reliability in nuclear power plants. CSNI Report No. 75. Paris, France: 1983.
[CSNI_01]
126 p.

[CSNI_02] CSNI. Expert judgment of human reliability. CSNI Report No. 75. Paris, France: 1985. 89 p.

[CSNI_03] CSNI. Human reliability models - critical operator actions. NEA/CSNI/R(98)1. 1998. 247 p.

[CSNI_04] CSNI. Human reliability models - questionnaire responses. NEA/CSNI/R(98)1/ADD1. 1998. 366 p.

[DEKK_01] DEKKER, S. The field guide to understanding human error. Burlington, VT: Ashgate Pub, 2006. 236 p.

DEKKER, S. W. A. Ten questions about human error: a new view of human factors and system safety.
[DEKK_02]
Mahwah, NJ: Lawrence Erlbaum, 2005. 241 p.
DEKKER, S. Drift into failure: from hunting broken components to undestandind complex systems.
[DEKK_03]
Burlington, VT: Ashgate, 2011. 220p.
JOHNSON, C. W.; PALANQUE, P., ed. Human error, safety and systems development. Boston, MA:
[JOHN_01]
Springer, 2004. 341 p.
KARWOWSKI, W., ed. International encyclopedia of ergonomics and human factors. Vol. 1. New York,
[KARW_01]


ENGINEERING

NUREG. INEEL/EXT-01-01166: Review of findings for human error contribution to risk in operating
[NURE_01]
events. Washington, DC: Office of Nuclear Regulatory Research, 2001. 107 p.
PERROW, C. Normal accidents: living with high-risk technologies. With a new afterword and a
[PERR_01]
postscript on the Y2K problem. Princeton, NJ: Princeton Univ Press, 1999. 451 p.
PETROSKI, H. To engineer is human: the role of failure in successful design. New York, NY: Vintage
[PETR_02]
Books, 1992. 251 p.

[SAND_01] SANDOM, C.; HARVEY, R. S., ed. Human factors for engineers. Herts, UK: IET, 2009. 389 p.

[STAN_01] STANTON, N., ed. Human factors in consumer products. Bristol, PA: Taylor & Francis, 1998. 306 p.

VAUGHAN, D. The Challenger launch decision - risky technology, culture, and deviance at NASA.
[VAUG_01]
Chicago, IL: Chicago Press, 1996. 575 p.
VINCENZI, D. A. et al., ed. Human factors in simulation and training. Boca Raton, FL: CRC Press,
[VINC_01]
2009. 470 p.
WHITTINGHAM, R. B. The blame machine - why human error causes accidents. Burlington, MA:
[WHIT_01]
WICKENS, C. D.; LEE, J. D.; LIU, Y.; BECKER, S. E. G. An introduction to human engineering. 2nd
[WICK_01]
ed. Upper Saddle River, NJ: Pearson Prentice Hall., 2004. 587 p.

3.10. Engenharia de Suportabilidade e Logística
Department of the Army. Logistics support element tactics, techniques, and procedures. FM 63-11.
[DOA_01]
Washington, DC: 1996.
JONES, J. V. Supportability engineering handbook: implementation, measurement and management.
[JONE_01]
USA: McGraw-Hill, 2007.
[JONE_02] JONES, J. V. Integrated logistics support handbook. 3rd ed. USA: McGraw-Hill, 2006.
[TAYL_01] TAYLOR, G. D. Logistics engineering handbook. Boca Raton, FL: CRC Press, 2008. 640 p.
[TAYL_02] TAYLOR, G. D. Introduction to logistics engineering. Boca Raton, FL: CRC Press, 2009. 315 p.

3.11. Engenharia de Sustentabilidade de Sistemas e Produtos
ABRAHAM, M. Sustainability in science and engineering - defining principles. Vol 1. Elsevier, 2006.
[ABRA_01]
513 p.

DONALD, L.; LONDON, S. S.; CHELLIS, J. Sibex, 2003 Environment management and maintenance.
[DONA_01]
Alameda, CA: Sibex, 2003. 624 p.

ELZEN, B.; GEELS, F. W.; GREEN, K. System innovation and the transition to sustainability.
[ELZE_01]
Cheltenham, UK: Elgar, 2004. 336 p.

MARTIN, W.F.; LIPPITT. J. M.; WEBB, P. J. Hazardous waste handbook for health and safety. 3rd ed.
[MART_01]
Woburn, MA: Butterworth–Heinemann, 2000. 262 p.

STASINOPOULUS, P.; SMITH, M. H.; HARGROVES, K.; DESHA, C. Whole system design -
[STAS_01]
sustainable engineering. London, UK: Earthscan, 2009. 208 p.

3.12. Engenharia de Verificação e Validação
ANDREWS, J. R. Co-verification of hardware and software for ARM SoC design. Burlington, MA:
[ANDW_01]
CHAN, H. A.; ENGLERT, P. J. Accelerated stress testing handbook - guide for achieving quality
[CHAN_01]
products. Piscataway, NJ: IEEE Press, 2001. 369 p.
DERSHOWITZ, N., ed. Verification: theory and practice. Essays dedicated to Zohar Manna on the
[DERS_01]
occasion of his 64th birthday. Berlin Heidelberg, Germany: Springer-Verlag, 2003. 782 p.
DODSON, Bryan; SCHWAB, Harry. Accelerated testing: a practitioner´s guide to accelerated and
[DODS_01]
reliability testing. Warrendale, PA: SAE Int., 2006. 254 p. Includes CD.


ENGINEERING

[DRAK_01] DRAKE, P. J. Dimensioning and tolerancing handbook. USA: McGraw-Hill, 1999. 734 p.

EVERETT, G. D.; McLEOD, R. Software testing - testing across the entire software development life
[EVER_01]
cycle. Hoboken, NJ: John Wiley, 2007. 257 p.
FUJITA, M.; GHOSH, I.; PRASAD, M. Verification techniques for system-level design. Burlington, MA:
[FUJI_01]
GRADY, J. O. System verification: proving the design solution satisfies the requirements. Burlington,
[GRAD_02]
MA: Elsevier, 2007. 337 p.
MINTZ, M.; EKENDAHL, R. Hardware verification with SystemVerilog: an object oriented framework.
[MINT_01]
New York, NY: Springer, 2007. 313 p.
MORRIS, A. Measurement and instrumentation principles. Woburn, MA: Butterworth-Heinemann,
[MORR_01]
2001. 491 p.
MUNDEN, R. ASIC and FPGA verification: a guide to component modeling. San Francisco, CA:
[MUND_01]

O´CONNOR, Patrick D. T. Test engineering: a concise guide to cost-effective design, development and
[OCON_03]
manufacture. Southern Gate, Chicester, West Sussex, England: John Wiley, 2001, reprint 2005. 268 p.

PORTER, Alex. Accelerated testing and validation: testing, engineering, and management tools for
[PORT_01]
lean development. Burlington, MA: Elsevier, 2004. 242 p. Includes CD.
RABINOVICH, S. G. Measurement errors and uncertainties - theory and practice. 3rd ed. New York,
[RABI_01]
NY: Springer, 2005. 313 p.
RASHINKAR, P.; PATERSON, P.; SINGH, L. System-on-a-chip verification - methodology and
[RASH_01]
techniques. USA: Kluwer Acad Pub, 2002. 372 p.

[ROYC_01] ROYCHOUDHURY, A. Embedded systems and software validation. USA: Elsevier, 2009. 254 p.
SCHEFFER, L.; LAVAGNO, L.; MARTIN, G. ed. Electronic Design Automation for Integrated Circuits
[SCHE_01] Handbook: EDA for IC System Design, Verification, and Testing. Boca Raton, FL: CRC Press, 2006.
511 p.
SCHULMEYER, G. G.; MACKENZIE, G. R. Verification & validation of modern software-intensive
[SCHU_01]
systems. Upper Saddle River, NJ: Prentice Hall, 2000. 493 p.
SINGH, L.; DRUCKER, L.; KHAN, N. Advanced verification techniques: a SystemC based approach
[SING_01]
for successful tapeout. Boston, MA: Kluwer Acad Pub, 2004. 376 p.
VIJAYARAGHAVAN, G. K.; RAJAPPAN, R. Engineering metrology and measurements. 4th ed.
[VIJA_01]
Medavakkam, Chennai, India: ARS Pub, 2009. 560 p.

[YUAN_01] YUAN, J.; PIXLEY, C.; AZIS, A. Constraint-based verification. New York, NY: Springer, 2006. 253 p.

3.13. Engenharia de Produção

[LEON_01] LEONDES, C., ed. The design of manufacturing systems. Boca Raton, FL: CRC Press, 2001. 292 p.

[LI_01] LI, J.; MEERKOV, S. M. Production systems engineering. New York, NY: Springer, 2009. 669 p.

3.14. Engenharia de Resiliência
HOLLNAGEL, E.; WOODS, D. D.; LAVESON, N. Resilience engineering: concepts and precepts.
[HOLL_01]
Farnham, England: Ashgate, 2006. 397 p.
[WEIC_01]

>>>>>> = <<<<<<


Pesq, Desenv e Inov (PDI) e Garantia de Sist e Prod (GSP): Ref Bibliog

Recommended

Recommended

More Related Content

Similar to Pesq, Desenv e Inov (PDI) e Garantia de Sist e Prod (GSP): Ref Bibliog

Similar to Pesq, Desenv e Inov (PDI) e Garantia de Sist e Prod (GSP): Ref Bibliog (20)

More from Antonio Sallum Librelato

More from Antonio Sallum Librelato (20)

Recently uploaded

Recently uploaded (20)

Pesq, Desenv e Inov (PDI) e Garantia de Sist e Prod (GSP): Ref Bibliog