SlideShare uma empresa Scribd logo
1 de 15
PRESENTATION
Submitted by :
ROHIT SINGH
Textile chemistry
Roll no. 1580260015 ,
Submitted to :
Dr. M.S.Parmar
&
Ms. Ruvindar Kumari
 Drying is a mass transfer process consisting of the removal of water or
another solvent by evaporation from a solid, semi-solid or liquid. This
process is often used as a final production step before selling or
packaging products. In sizing, drying is necessary to bring the sized
material hard.
 1. Cylinder Drying: In this type of m/c, drying is done by passing over hot
cylinders.
 (a) Two Cylinder Drying:
1. In this drying process, two copper cylinder are used in which one cylinder
is large diameter & other is small comparatively.
2. Firstly warp sheet is passed below the small cylinder & then over the
bigger one.
3. The yarn is dried while traveling through the circumstances of the cylinder.
Drying | Drying Systems Used in Sizing |
Cylinder Drying / Hot Air Drying / Infrared
Drying / Combined Drying
Two Cylinder Drying:
Two Cylinder Drying
Advantages:
1.Simple process & cheap.
2.Less risky.
3.Temp. uniform.
4.Almost uniform drying.
1.Slow process.
2.Drying efficiency is low.
3.Irregular drying.
4.Due to sticky property of cylinder uneven drying.
 (b) Multi Cylinder Drying:
Disadvantages:
Multi Cylinder Drying
1.In this type of m/c, the drying unit consists of 5 to 7 or 11
cylinders having same diameter are used.
2.All cylinders may be steel cylinders or first two cylinders are
teflon coated & rest of aresteel cylinder.
3.The cylinders are heated by passing steam.
4.Heat in initial cylinder is low & gradually increases when
moved towards finalcylinder.
5.If large amount of heat is given to the initial, the sized may be
backed.
6.If finer yarn is used, then no need to use excess cylinder.
Multi Cylinder Drying:
1.High speed process.
2.Uniform drying.
3.Non- sticky so smooth drying.
4.Drying efficiency high.
5.Less time required
 Disadvantages:
1.For high viscosity, stick properly may observed.
2.For friction, yarn hairiness.
3.Shinning effect.
4.Yarn shape may hamper.
5.Possibility of yarn flaten.
Advantages:
• In this m/c, the drying unit is a closed chamber containing a
number of guide rollersthrough warp yarn.
• Hot air blown into the chamber causing the moisture in the
yarn toevaporate.
• Exhaustion should be used to throw away the moisture.
• If moisture remains inside the chamber it may condense &
again fallon the yarn.
• Hot air should be continuously passed through the chamber, so
theprocess becomes somewhat costly.

2. Hot Air Drying:
Hot Air Drying:
Hot Air Drying
1.Regular drying.
2.Not shinning effect.
3.Non-sticky property.
4.High speed drying.
Disadvantages:
1.Costly process.
2.For closed chamber, reqd more time.
3.Less suitable for fine yarn.
4.Difficult to maintain temperature.
Advantages:
• In this machine, the heating chamber consists of a plate
which is constantly heated by gas flame.
• The warp sheet is passed over the plate & dried in the
process.
• When gas flames are not used, then electronic plate may be
used.
• Arrangement should be made to through out the moisture
removed from the yarn. This m/c is not used signally.
3. Infrared Drying:
1.No shining effect.
2.Drying efficiency high
Disadvantages:
1.Yarn may burn.
2.Higher cost.
3.Difficult to maintain uniform heating.
4.Risk of accident.
Advantages:
• In this type of m/c, preheating is done as cylinder drying
method.
• And final drying is done by hot air drying method or infrared
drying method.
4. Combined Drying
Infrared Drying
1.Regular drying.
2.Drying efficiency high.
3.Speedy process.
Disadvantages:
1.Shinning effect.
2.High cost.

Advantages:
 This machine developed from the old hanging room, consists
of cloth bearing poles moving along on a pair of conveyor chain.
 The wet cloth hangs over the poles in loops.
 Hot air is circulated in the machine which dries the cloth.
 As the fabric is transported in long loops over rollers in the
drying chamber ,it is not free from tension and creases.
 The drying is not uniform and as only a small amount of air is in
circulation ,the drying capacity is low .
 Several improvements have been made the machine efficient
;these have resulted in the development of twotypes of drying
chambers in the machine.
Festoon Dryer
Festoon Dryer
Festoon Dryer

Mais conteúdo relacionado

Mais procurados

Fundamentals of denim & faults in rope dyeing
Fundamentals of denim & faults in rope dyeingFundamentals of denim & faults in rope dyeing
Fundamentals of denim & faults in rope dyeing
Md. Mazadul Hasan Shishir
 

Mais procurados (20)

Ball Warping Process
Ball Warping ProcessBall Warping Process
Ball Warping Process
 
Automatic Dispensing Machine for Textile Dyeing Lab
Automatic Dispensing Machine for Textile Dyeing LabAutomatic Dispensing Machine for Textile Dyeing Lab
Automatic Dispensing Machine for Textile Dyeing Lab
 
Presentation on process control study in spinning dpt.
Presentation on process control study in spinning dpt.Presentation on process control study in spinning dpt.
Presentation on process control study in spinning dpt.
 
package dyeing machine
package dyeing machinepackage dyeing machine
package dyeing machine
 
Stenter machine process
Stenter machine processStenter machine process
Stenter machine process
 
Fundamentals of denim & faults in rope dyeing
Fundamentals of denim & faults in rope dyeingFundamentals of denim & faults in rope dyeing
Fundamentals of denim & faults in rope dyeing
 
Carding (1)
Carding (1)Carding (1)
Carding (1)
 
Dyeing machineries
Dyeing machineriesDyeing machineries
Dyeing machineries
 
Pad Batch Dyeing Method.pptx
Pad Batch Dyeing Method.pptxPad Batch Dyeing Method.pptx
Pad Batch Dyeing Method.pptx
 
Drawing and texturising
Drawing and texturising Drawing and texturising
Drawing and texturising
 
Warping
WarpingWarping
Warping
 
Exhaust dyeing process
Exhaust dyeing processExhaust dyeing process
Exhaust dyeing process
 
An investigation on the inspection of grey & finished knit fabric in wet proc...
An investigation on the inspection of grey & finished knit fabric in wet proc...An investigation on the inspection of grey & finished knit fabric in wet proc...
An investigation on the inspection of grey & finished knit fabric in wet proc...
 
Disperse dyeing
Disperse dyeing Disperse dyeing
Disperse dyeing
 
Textile Dyeing Machinery
Textile Dyeing MachineryTextile Dyeing Machinery
Textile Dyeing Machinery
 
DESIZING
DESIZINGDESIZING
DESIZING
 
Knit dyeing faults & remedies
Knit dyeing faults & remediesKnit dyeing faults & remedies
Knit dyeing faults & remedies
 
Winch machine
Winch machineWinch machine
Winch machine
 
Pretreatment of textile materials
Pretreatment of textile materialsPretreatment of textile materials
Pretreatment of textile materials
 
Finihing machine
Finihing  machineFinihing  machine
Finihing machine
 

Semelhante a Hot drying in textile finishing

Semelhante a Hot drying in textile finishing (20)

Drying (dryers)
Drying (dryers) Drying (dryers)
Drying (dryers)
 
Drying
DryingDrying
Drying
 
Textile chemistry
Textile chemistryTextile chemistry
Textile chemistry
 
Drying final
Drying finalDrying final
Drying final
 
DRYING and DRYERS
DRYING and DRYERSDRYING and DRYERS
DRYING and DRYERS
 
textile finishing
textile finishingtextile finishing
textile finishing
 
Features And Advantages of Fluid Bed Dryers In Pharmaceutical Industry.pptx
Features And Advantages of Fluid Bed Dryers In Pharmaceutical Industry.pptxFeatures And Advantages of Fluid Bed Dryers In Pharmaceutical Industry.pptx
Features And Advantages of Fluid Bed Dryers In Pharmaceutical Industry.pptx
 
DRYiNG 1.pptx
DRYiNG 1.pptxDRYiNG 1.pptx
DRYiNG 1.pptx
 
Drying equipments
Drying equipmentsDrying equipments
Drying equipments
 
Drying and mixing
Drying and mixingDrying and mixing
Drying and mixing
 
Drying and dehumidification
Drying and dehumidification Drying and dehumidification
Drying and dehumidification
 
Different components of spinning process
Different components of spinning processDifferent components of spinning process
Different components of spinning process
 
Drying of food
Drying of foodDrying of food
Drying of food
 
Spinning process
Spinning processSpinning process
Spinning process
 
Kh2.drying process
Kh2.drying processKh2.drying process
Kh2.drying process
 
drying
dryingdrying
drying
 
Tray dryer
Tray dryer Tray dryer
Tray dryer
 
Crystallization and drying
Crystallization and dryingCrystallization and drying
Crystallization and drying
 
Spinning process
Spinning processSpinning process
Spinning process
 
Spray drying pdf In food industry.
Spray drying pdf In food industry. Spray drying pdf In food industry.
Spray drying pdf In food industry.
 

Mais de ROHIT SINGH

Mais de ROHIT SINGH (10)

3 Bleaching Process .ppt
3 Bleaching Process .ppt3 Bleaching Process .ppt
3 Bleaching Process .ppt
 
2 Pre treatments of textile material.ppt
2 Pre treatments  of textile material.ppt2 Pre treatments  of textile material.ppt
2 Pre treatments of textile material.ppt
 
1 chemical processing.ppt
1 chemical processing.ppt1 chemical processing.ppt
1 chemical processing.ppt
 
Technical textiles
Technical textilesTechnical textiles
Technical textiles
 
Weaving Department about loom mechanism _unit_2
Weaving  Department  about loom mechanism  _unit_2Weaving  Department  about loom mechanism  _unit_2
Weaving Department about loom mechanism _unit_2
 
Medical textiles are textile products_ppt
Medical textiles are textile products_pptMedical textiles are textile products_ppt
Medical textiles are textile products_ppt
 
Unit ii coating.of textile fabric ppt
Unit ii coating.of textile fabric pptUnit ii coating.of textile fabric ppt
Unit ii coating.of textile fabric ppt
 
Overview of garment manufacturing
Overview of garment manufacturingOverview of garment manufacturing
Overview of garment manufacturing
 
Textile processing of many textile material
Textile processing of  many textile materialTextile processing of  many textile material
Textile processing of many textile material
 
TEXTILE PROCESS TRANING REPORT
TEXTILE PROCESS  TRANING REPORT TEXTILE PROCESS  TRANING REPORT
TEXTILE PROCESS TRANING REPORT
 

Último

Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdfVishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
ssuserdda66b
 
The basics of sentences session 3pptx.pptx
The basics of sentences session 3pptx.pptxThe basics of sentences session 3pptx.pptx
The basics of sentences session 3pptx.pptx
heathfieldcps1
 

Último (20)

Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdfVishram Singh - Textbook of Anatomy  Upper Limb and Thorax.. Volume 1 (1).pdf
Vishram Singh - Textbook of Anatomy Upper Limb and Thorax.. Volume 1 (1).pdf
 
Python Notes for mca i year students osmania university.docx
Python Notes for mca i year students osmania university.docxPython Notes for mca i year students osmania university.docx
Python Notes for mca i year students osmania university.docx
 
General Principles of Intellectual Property: Concepts of Intellectual Proper...
General Principles of Intellectual Property: Concepts of Intellectual  Proper...General Principles of Intellectual Property: Concepts of Intellectual  Proper...
General Principles of Intellectual Property: Concepts of Intellectual Proper...
 
How to Manage Global Discount in Odoo 17 POS
How to Manage Global Discount in Odoo 17 POSHow to Manage Global Discount in Odoo 17 POS
How to Manage Global Discount in Odoo 17 POS
 
Unit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptxUnit-IV- Pharma. Marketing Channels.pptx
Unit-IV- Pharma. Marketing Channels.pptx
 
Towards a code of practice for AI in AT.pptx
Towards a code of practice for AI in AT.pptxTowards a code of practice for AI in AT.pptx
Towards a code of practice for AI in AT.pptx
 
Unit-IV; Professional Sales Representative (PSR).pptx
Unit-IV; Professional Sales Representative (PSR).pptxUnit-IV; Professional Sales Representative (PSR).pptx
Unit-IV; Professional Sales Representative (PSR).pptx
 
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
Mixin Classes in Odoo 17  How to Extend Models Using Mixin ClassesMixin Classes in Odoo 17  How to Extend Models Using Mixin Classes
Mixin Classes in Odoo 17 How to Extend Models Using Mixin Classes
 
SOC 101 Demonstration of Learning Presentation
SOC 101 Demonstration of Learning PresentationSOC 101 Demonstration of Learning Presentation
SOC 101 Demonstration of Learning Presentation
 
Single or Multiple melodic lines structure
Single or Multiple melodic lines structureSingle or Multiple melodic lines structure
Single or Multiple melodic lines structure
 
FSB Advising Checklist - Orientation 2024
FSB Advising Checklist - Orientation 2024FSB Advising Checklist - Orientation 2024
FSB Advising Checklist - Orientation 2024
 
Food safety_Challenges food safety laboratories_.pdf
Food safety_Challenges food safety laboratories_.pdfFood safety_Challenges food safety laboratories_.pdf
Food safety_Challenges food safety laboratories_.pdf
 
Understanding Accommodations and Modifications
Understanding  Accommodations and ModificationsUnderstanding  Accommodations and Modifications
Understanding Accommodations and Modifications
 
How to Give a Domain for a Field in Odoo 17
How to Give a Domain for a Field in Odoo 17How to Give a Domain for a Field in Odoo 17
How to Give a Domain for a Field in Odoo 17
 
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
Explore beautiful and ugly buildings. Mathematics helps us create beautiful d...
 
The basics of sentences session 3pptx.pptx
The basics of sentences session 3pptx.pptxThe basics of sentences session 3pptx.pptx
The basics of sentences session 3pptx.pptx
 
HMCS Max Bernays Pre-Deployment Brief (May 2024).pptx
HMCS Max Bernays Pre-Deployment Brief (May 2024).pptxHMCS Max Bernays Pre-Deployment Brief (May 2024).pptx
HMCS Max Bernays Pre-Deployment Brief (May 2024).pptx
 
Fostering Friendships - Enhancing Social Bonds in the Classroom
Fostering Friendships - Enhancing Social Bonds  in the ClassroomFostering Friendships - Enhancing Social Bonds  in the Classroom
Fostering Friendships - Enhancing Social Bonds in the Classroom
 
ICT Role in 21st Century Education & its Challenges.pptx
ICT Role in 21st Century Education & its Challenges.pptxICT Role in 21st Century Education & its Challenges.pptx
ICT Role in 21st Century Education & its Challenges.pptx
 
On National Teacher Day, meet the 2024-25 Kenan Fellows
On National Teacher Day, meet the 2024-25 Kenan FellowsOn National Teacher Day, meet the 2024-25 Kenan Fellows
On National Teacher Day, meet the 2024-25 Kenan Fellows
 

Hot drying in textile finishing

  • 1. PRESENTATION Submitted by : ROHIT SINGH Textile chemistry Roll no. 1580260015 , Submitted to : Dr. M.S.Parmar & Ms. Ruvindar Kumari
  • 2.  Drying is a mass transfer process consisting of the removal of water or another solvent by evaporation from a solid, semi-solid or liquid. This process is often used as a final production step before selling or packaging products. In sizing, drying is necessary to bring the sized material hard.  1. Cylinder Drying: In this type of m/c, drying is done by passing over hot cylinders.  (a) Two Cylinder Drying: 1. In this drying process, two copper cylinder are used in which one cylinder is large diameter & other is small comparatively. 2. Firstly warp sheet is passed below the small cylinder & then over the bigger one. 3. The yarn is dried while traveling through the circumstances of the cylinder. Drying | Drying Systems Used in Sizing | Cylinder Drying / Hot Air Drying / Infrared Drying / Combined Drying
  • 3. Two Cylinder Drying: Two Cylinder Drying Advantages: 1.Simple process & cheap. 2.Less risky. 3.Temp. uniform. 4.Almost uniform drying.
  • 4. 1.Slow process. 2.Drying efficiency is low. 3.Irregular drying. 4.Due to sticky property of cylinder uneven drying.  (b) Multi Cylinder Drying: Disadvantages: Multi Cylinder Drying
  • 5. 1.In this type of m/c, the drying unit consists of 5 to 7 or 11 cylinders having same diameter are used. 2.All cylinders may be steel cylinders or first two cylinders are teflon coated & rest of aresteel cylinder. 3.The cylinders are heated by passing steam. 4.Heat in initial cylinder is low & gradually increases when moved towards finalcylinder. 5.If large amount of heat is given to the initial, the sized may be backed. 6.If finer yarn is used, then no need to use excess cylinder. Multi Cylinder Drying:
  • 6. 1.High speed process. 2.Uniform drying. 3.Non- sticky so smooth drying. 4.Drying efficiency high. 5.Less time required  Disadvantages: 1.For high viscosity, stick properly may observed. 2.For friction, yarn hairiness. 3.Shinning effect. 4.Yarn shape may hamper. 5.Possibility of yarn flaten. Advantages:
  • 7. • In this m/c, the drying unit is a closed chamber containing a number of guide rollersthrough warp yarn. • Hot air blown into the chamber causing the moisture in the yarn toevaporate. • Exhaustion should be used to throw away the moisture. • If moisture remains inside the chamber it may condense & again fallon the yarn. • Hot air should be continuously passed through the chamber, so theprocess becomes somewhat costly.  2. Hot Air Drying:
  • 8. Hot Air Drying: Hot Air Drying
  • 9. 1.Regular drying. 2.Not shinning effect. 3.Non-sticky property. 4.High speed drying. Disadvantages: 1.Costly process. 2.For closed chamber, reqd more time. 3.Less suitable for fine yarn. 4.Difficult to maintain temperature. Advantages:
  • 10. • In this machine, the heating chamber consists of a plate which is constantly heated by gas flame. • The warp sheet is passed over the plate & dried in the process. • When gas flames are not used, then electronic plate may be used. • Arrangement should be made to through out the moisture removed from the yarn. This m/c is not used signally. 3. Infrared Drying:
  • 11. 1.No shining effect. 2.Drying efficiency high Disadvantages: 1.Yarn may burn. 2.Higher cost. 3.Difficult to maintain uniform heating. 4.Risk of accident. Advantages:
  • 12. • In this type of m/c, preheating is done as cylinder drying method. • And final drying is done by hot air drying method or infrared drying method. 4. Combined Drying Infrared Drying
  • 13. 1.Regular drying. 2.Drying efficiency high. 3.Speedy process. Disadvantages: 1.Shinning effect. 2.High cost.  Advantages:
  • 14.  This machine developed from the old hanging room, consists of cloth bearing poles moving along on a pair of conveyor chain.  The wet cloth hangs over the poles in loops.  Hot air is circulated in the machine which dries the cloth.  As the fabric is transported in long loops over rollers in the drying chamber ,it is not free from tension and creases.  The drying is not uniform and as only a small amount of air is in circulation ,the drying capacity is low .  Several improvements have been made the machine efficient ;these have resulted in the development of twotypes of drying chambers in the machine. Festoon Dryer