Eastwood’s Fender Finisher® Easily “roll” front fender lips to increase tire clearance without having to remove the wheel!

1. Eastwood’s Fender Finisher®
Easily “roll” front fender lips to increase tire clearance
without having to remove the wheel!
Constructed from
powder coated
stamped steel
with molded
hand grips and
replaceable
“forming”
Save your back! pads this tool
Portable Stand lets you will last for years. 2 extra pads and
work standing up The extended reach handle instruction book
included
Our portable bench is easy to set up. Sturdy provides the leverage needed to roll
tubular steel frame adjusts for varying front fenders easily and quickly. A
heights and widths. Thick 3/8” foam rubber typical car will take about 20-30
padding protects parts from scratching. minutes and can be done without
500 pound capacity. jacking or removing the wheels.
43120 ortable Work Stand
P Replaceable rubber forming pads
NEW LOW PRICE $29.99 are designed to take the abuse and
minimize any paint damage. Typically
one pad will roll both front fenders.
Save $9.98 on complete
Larry Lyles DVD set! Easy 2 Step process:
1. Turn the front wheels in both
directions and determine the contact
area with the front fenders. Mark the
area to be “rolled” with tape.
2. Use the Fender Finisher and slowly
reshape and roll in the inner fender
edge. Do not compress the lip in one
motion but slowly form the lip in
small increments, to assure an OE From muscle car
Learn with Larry Lyles! look and reduce the chance of over- to late model –
Curing Paint Problems If you’ve ever forming and stretching the metal. roll fenders fast
had a paint problem this DVD will show A must have tool for any application and easily
you how to correct that problem and teach where you are increasing wheel/tire
you how to prevent problems from ever size, lowering the front suspension
happening in the first place. or just want a custom “roll” look
12255 Vol 4, Curing Paint to the front fenders. Includes tool,
Problems DVD $34.99
(2) replaceable pads and detailed
Basic Body Repair Take out dents, instruction book.
apply body filler and block it smooth, repair 11537 Eastwood Fender Finisher
hail damage and replace rusted sheet metal NEW LOW PRICE $49.99
with the latest non-structural sheet metal 11952 Replacement Pads $7.99
replacement techniques and more.
21538 Vol 1, Basic Body Eastwood’s Fender
Repair DVD $34.99
Basic Painting Techniques Block sand Finishing Tool
to perfection, then learn about the latest easily “rolls” the front
painting products and techniques – fender’s sharp inner edge,
base coat/clear coat. Finally, polishing to
perfection to get that “lacquer look”.
to prevent tire damage
21539 Vol 2, Painting
Techniques DVD $34.99
Sheet Metal Replacement Learn how Save when you buy
to replace floor pans, quarter panels, door the combination Fender
skins and unibody sheet metal panels like Finisher and Heat Gun Kit
the pros. Includes section on lead repair. Use the heat gun to gently heat the paint
21540 Vol 3, Sheet Metal on the outside of the fender to ease forming
Replacement DVD $34.99
without damaging the paint.
12384 4 DVD Set, Over 200 minutes 12122 Eastwood Fender Finisher and
Orig. $139.96 Heat Gun Kit Orig. $99.98
Save $9.97 $129.99 Save $9.99 $89.99
26 BODY AND FENDER Order 24/7 at eastwood.com