USB 3.0 is the third major version of the Universal Serial Bus (USB) standard for interfacing computers and electronic devices. Among other improvements, USB 3.0 adds the new transfer rate referred to as SuperSpeed USB (SS) that can transfer data at up to 5 Gbit/s (625 MB/s), which is about ten times as fast as the USB 2.0 standard.
2.
USB stands for Universal Serial Bus
Provides an expandable, fast, bi-directional, low cost,
hot pluggable Plug and Play serial hardware
interface
Allows users to connect a wide variety of peripherals
to a computer and have them automatically
configured and ready to use
Implemented to provide a replacement for legacy
ports to make the addition of peripheral devices
quick and easy for the end user
What is USB ?
4. Who created USB ?
USB was created by USB Implementers Forum
(USB-IF) in 1996. And Developed and standardized by a group of leading companies from the
computer and electronics industries in 1995
5.
Unify— To replace the multitude of connectors at
the back of PCs
Plug and Play—without the need for physical device
configuration, or user intervention in resolving
resource conflicts.
Hot Swapping—allowing devices to be connected
and disconnected without rebooting the computer or
turning off the device.
Goal of USB
10.
The next generation of USB hardware and
specifications is USB 3.0
Version was announced by Pat Gelsinger at the Intel
Developer Forum in September 2007
USB 3.0 Promoter Group announced in November
2008
USB Now
14.
Characteristic SuperSpeed USB USB 2.0
Data Rate SuperSpeed (5.0 Gbps) low-speed (1.5 Mbps),
full-speed (12 Mbps),
and high-speed (480
Mbps)
Data Interface Dual-simplex, four-wire
differential signaling
separate from USB 2.0
signaling
Simultaneous bi-directional
data flows
Half-duplex two-wire
differential signaling
Unidirectional data
flow with negotiated
directional bus
transitions
Cable signal count Six: Four for SuperSpeed
data path
Two for non-SuperSpeed data
path
Two: Two for low-
speed/full-speed/high-
speed data path
Bus transaction
protocol
Host directed, asynchronous
traffic flow. Packet traffic is
explicitly routed .
Host directed, polled
traffic flow.Packet
traffic is broadcast to all
devices.
Data transfer
types
USB 2.0 types with SuperSpeed
constraints. Bulk has streams
capability (refer to Section
3.2.8)
Four data transfer
types: control, bulk,
Interrupt, and
Isochronous