PUNTOG - HEAD SHOP - VAPE SHOP - HEMP SHOP - GROW SHOP VENDITA E ASSISTENZA ON LINE SU VAPORIZZATORI www.puntog-shop.com Mobile +39 345 889 3933 Email : info@puntog-shop.com ORDINI TELEFONICI PER VAPORIZZATORI Spediamo la merce in tutta Italia con Consegna in pacco assolutamente robusto. Riceverai la merce entro tre giorni lavorativi dall’ordine. Chiama Ora!

1. Instructions for use
Wheneverhandlingparts,pleaseexercisecautionandensurethatyourROORVaporissetupinasuitablelocation.
The conical glass connections are joined with an accurate fit. To dismantle, first loosen these connections by
turning before separating the parts.
Fill the ROOR Vapor body with a little water (until just above the holes) . The water filters all solids out of the
vapour while also cooling it.
Place head with stainless steel screen on body. Put the leaves, finely ground with a mill, into the head until the
screen is fully covered. Now place the heating element on the filled head.
Connect the heating element to the power adapter and power plug with the socket.
Assembly
Scope of supply for electronics -
ROOR VAPOR basic (constant)
Scope of supply for electronics -
ROOR VAPOR XL (controllable)
Scope of supply for glass
Switching power adapter Temperature adjustment controller
Scope of supply for electronics
(US)
(EU)Power plugHeating element/injector Power adapter
Bowl
with stainless steel screen ROOR Vapor pokerROOR Vapor cooling stand
ROOR Vapor body ROOR Vapor mouthpiece

2. To learn more visit www.roor.de/vapor or contact vapor@roor.de
(US)
(EU)
User instructions
Caution: To avoid damaging the heating element, NEVER BLOW into the ROOR Vapor.
As soon as a sufficient temperature is reached, the ROOR Vapor can be left on for several hours and
used without preheating.
2) TIPP! You should inhale slowly and continuously for optimum efficiency
3) After inhaling several times, remove the heating element and place on the stand.
(Take care, it will be very hot)
Avoid other materials as these could be highly flammable or heat-sensitive. Alternatively, the heating element
itself may be damaged.
Then use the glass rod to stir the leaves to ensure complete vaporisation.
4)Thevaporisationprocessiscompletewhenthegreenoftheleavesturnsyelloworthetastebecomes unpleasant.
5) To replace the leaves, follow the instructions under point 3.
6) Empty the bowl after every session. This is easier to do when it is still warm. The screen is very easy
to remove along with the glass rod. To prevent blockages, clean the bowl regularly with a small brush.
Thanks for purchasing the ROOR Vapor. We hope you enjoy using our product.
Allow 10 minutes for warming up before use.
1) Set the temperature adjustment controller to
therequiredtemperature.Theoptimumtemperature
for resinous leaves is about 190°C/375°F on the
regulation display.
Abstufungen/Temperaturen(*onlyXL-Version)
1-90°C/194°F 2-110°C/230°F 3-130°C/266°F
4-150°C/300°F 5-180°C/356°F 6-190°C/375°F
7-200°C/392°F 8-210°C/410°F 9-220°C/428°F
10-230°C/446°F
1) Switch on the ROOR Vapor with the switching
power adapter.
ROOR VAPOR basic ROOR VAPOR XL
Connect the heating element to the power
adapter and power plug with the socket.
WARNING
WiththeXLmodel,thecontrollerMUSTbeplaced
betweenthepoweradapterandheatingelement.
NEVERconnectwithoutcontrollerotherwise
too much power will enter the heating
elementandthedevicemaybedamaged.
Switching
power adapter
Temperature
adjustment
controllerHeatingelement Heatingelement Power plug
(US)
(EU)
Power plug