1. QuikSteel
Steel Reinforced Epoxy Putty from Project Sales Corp, India sales@projectsalescorp.com
QuikSteel Is the world's number one single pack Epoxy Putty for repairing almost everything and anything.
QuikSteel sets steel hard in 15 minutes.
QuikSteel has unlimited uses
At Work
At Home
On the Road
In and on the Water
On the Farm
repairs leaks, breaks, cracks and holes in Cars, Bikes, Lorries, Caravans & Boats, Mowers, Engines,
QuikSteel Batteries, Exhausts & Fuel Tanks, Machines, Cookers, Radiators, Pipes
Ponds, Tanks, Baths, Sinks, Tiles, Furniture and so on
QuikSteel is easy, safe and simple to use
Clean and prepare repair object
Cut off required amount of QuikSteel
Knead thoroughly until streak free
Apply firmly to repair object
Wash hands with soap & water.
Is a two component epoxy resin in a single stick; the outer layer is the epoxy and the core the
QuikSteel
activator.
cures by chemical reaction initiated by kneading the putty until epoxy and activator are thoroughly
QuikSteel mixed. It will set hard in any atmospheric conditions and even immersed in fluids within 15 - 30
minutes and achieve full chemical cure within 1 hour.
adheres to virtually all solid surfaces including all metals, wood, masonry, glass and most plastics.
For perfect adhesion, it is essential that the surfaces are free of contamination and debris. If applied
QuikSteel
under water, QuikSteel should be held in position for 2-3 minutes to allow it to start bonding with the
substrate.
is resistant to temperatures between -70ºC and +260ºC and, once cured, is impervious to most
QuikSteel acids and solvents (including petrol and diesel). It does not conduct electricity and can be used as an
insulating material.
QuikSteel can be drilled, sawn, milled, ground, filed, tapped, sanded, painted and lacquered once it has cured.
is supplied in 60g or 120g sticks. It will remain malleable for up to 3 years even after opening the pack
QuikSteel
providing it is kept in its tube.
After kneading and mixing QuikSteel, quickly wipe your fingers and moisten them. This will ensure the
Tips product sticks to the object and not your fingers and helps to achieve a smooth finish. To prevent
QuikSteel from sticking where it is not required, treat surfaces with a silicon gel or release oil.