everything you need to know about Polyform and our products, as well as low cost housing

1. ESTABLISHED IN 1999
POLYFORM PRESENTATION
ESTABLISHED IN 1999
POLYFORM PRESENTATION

2. Wolf Binder is a professional engineer
Engineers [in Britain] in 1967 and registered
& Associates in Pietermaritzburg, South
support to the Structural Engineers of Polyform
In 1965 Wolf was working for Louis van Loon, Consulting
supervise the construction of the parking and 11 story
most futuristic and complicated building in Durban (South
infancy and Wolf did the intricate design with a slide
post stressed elements which later gave birth to
manufactured in his Precon factory until his invention
polystyrene/reinforced concrete systems are far more
sold Precon in 1999 and commenced with POLYFORM
.
INVENTOR & PROVIDER OF TECHNICAL SUPPORT
engineer qualified with the Institute of Structural
registered with ECSA. He now practices as Binder
Africa from where he provides technical
Polyform Licensees
Consulting Engineer, who assigned him to design and
story apartment, the Durban Sands, Arguably still the
(South Africa). At that time computers were in their
slide rule. This included several precast reinforced and
to inventions of precast components. These he
invention of the Polyslab and Polystair. These composite
more profitable and often require no factory - so he
POLYFORM.
INVENTOR & PROVIDER OF TECHNICAL SUPPORT

3. AWARDS
Polyform was awarded a gold medal with the special commendation of the
International Jury at the prestigious Geneva International Exhibition in
2000. The Polish Institution of Inventors and Rationalisers also awarded
their trophy to Polyform
exhibition.In the same year
At the Filda Exhibition in Luanda, Angola. And was awarded the
de’Ouro plaque.
AWARDS
was awarded a gold medal with the special commendation of the
International Jury at the prestigious Geneva International Exhibition in
2000. The Polish Institution of Inventors and Rationalisers also awarded
Polyform considering it the best invention at the
the same year Polyform exhibited
Exhibition in Luanda, Angola. And was awarded the Leao

4. Polyform is involved in establishing licenses in countries that are Earthquake and stormprone.The Delegation
was led by the Honorable Deputy Minister of Trade and Industries and was assisted by the South African
Embassy in Turkey
SOUTH AFRICAN TURKEY TRADE MISSION 2013
Polyform is involved in establishing licenses in countries that are Earthquake and stormprone.The Delegation
was led by the Honorable Deputy Minister of Trade and Industries and was assisted by the South African
SOUTH AFRICAN TURKEY TRADE MISSION 2013

5. POLYFORM POLYSTYRENE SYSTEM INDEX
1. Polyslabs
2. Polystairs
& Polyanelstairs
3. Polyground slabs
4. Polyfloors
5. Polystructures
On site constructed
& Mobile
6. Poly A frames
An economic, insulated, easy, safe
alternative to conventional
reinforced
or precast concrete construction
POLYFORM POLYSTYRENE SYSTEM INDEX
An economic, insulated, easy, safe
alternative to conventional
reinforced
or precast concrete construction
7. Polypartitions
8. Polypalisade fencing
9. Polylintels
10. Polyreservoirs/pools
11. Polyretaining walls
12. Polyfurniture

6. AGRE´MENT CERTIFICATION
Polyform
certificate
for
means
Authorities
grant
of
find
will
Dr Wekesa of Agre'ment on left &
Dr Mahache of NHBRC on right
handing Agre'ment certificate to
Wolf Binder
MENT CERTIFICATION
Polyform has received a
certificate from Agre´ment
for its Polystructures. This
means that all Building
Authorities and NHBRC will
grant approval of this system
construction and you will
find banking institutions who
will grant loans much easier.

7. Based on extensive testing and report by Experts
Polystructures with conventional brick construction
external walls built of 230 mm brick and internal walls
plastered internal wall surfaces
a concrete floor
a sheeted roof that is fitted with a ceiling without
Here are their findings on the performance and habitability
Fire resistance of 60 minutes which allows uses
structures
Structural performance Satisfactory, provided the
3 of their certificate are kept. Polyform has its
service
Water penetration and rising damp Satisfactory
resistance to rainwater penetration and rising damp
Thermal performance Maximum summer temperatures
standard brick house
Energy usage Energy required in winter will be less
Condensation Satisfactory – performs better than
Acoustic performance Satisfactory meeting the
and dwellings
Durability will be satisfactory provided that the
certificate are adhered to
Quality management system The certificate holder’s
SANS/ISO 9001
Experts on various aspects Agre´ment compares
construction having:
walls of 110 mm brickwork
without insulation
habitability of Polystructures Building Systems:
for up to 10 storey residential and commercial
the requirements of the Technical description part
its own Professional Engineer and Architectural
Satisfactory. System meets Agre´ment SA’s criteria for
damp throughout South Africa
temperatures will be less than that required for a
less than the standard brick house
than the standard brick house
criteria for sound attenuation between rooms
requirements for plastering sand stated in the
holder’s quality management system complies with

8. Polystructures
patent certificate
which provides
protection on
products for 20
years

9. MASTER BUILDERS
• Wolf
MASTER BUILDERS
• Wolf and Jenny at
the Master Builders
Merit Award
function for
innovation where
he was runner-up
amongst the 12
nominees

10. POLYSLABS
ADVANTAGES OVER SHUTTERED SOLID SLABS AND PRECAST CONCRETE SYSTEMS
1. Polyslab formwork replaces steel or timber. It harnesses
the strength of the polystyrene blocks and has been tested
under the surveillance of the SABS and is designed to give a
factor of safety of 2.0 under construction loadings between
lines of temporary supports. Wolf noticed in Turkey that the
slabs are still fully shuttered and polystyrene blocks placed on
this acting only to replace some concrete and provide
insulation.
2. Cost comparisons with shuttered slabs by a Quantity Surveyor
show approximately 30 % saving.
POLYSLABS
ADVANTAGES OVER SHUTTERED SOLID SLABS AND PRECAST CONCRETE SYSTEMS.
3. Lightweight - Saves up to 5% per floor on foundations
and the supporting reinforced concrete structure
4. Excellent insulation increasing comfort zone and
reducing the electricity bill for air conditioning.
According to an electrical consultants report it cuts cost
by ±10% on cooling in Summer and ± 5% on heating in
winter.
5. Can span to 10 or more metres which by far exceeds
the capacity of manually erected precast concrete
slabs.
6. Because the underside is fully polystyrene only a
rhinolite skim coat is required.

11. POLYSLAB ADVANTAGES
7. Unlike systems using precast concrete ribs, Polyslabs
provide a complete polystyrene ceiling avoiding cracks
in the skim coat or rough cast plaster.
POLYSLAB ADVANTAGES
8. Where the ceiling finish is not important the Poly 'R‘
Slab allows the retraction and several reuses of the
formwork.
9. As seen on the photo, Polyslabs can be cut on site
with a hand saw to suit any shape on plan

12. NEW POLYRIBLOK SLABS USING
WASTE POLYSTYRENE INCLUDING
THE RIB FORMERS WHICH ARE
BUNDLED TOGETHER OR BAGGED
TO REPLACE THE SOLID BLOCKS
NEW POLYRIBLOK SLABS USING
WASTE POLYSTYRENE INCLUDING
THE RIB FORMERS WHICH ARE
BUNDLED TOGETHER OR BAGGED
TO REPLACE THE SOLID BLOCKS

13. DESCRIPTION OF NEW BLOCKS AND
CONSTRUCTION PROCEDURE
2 a . POLYRIB BLOCKS – see fig. 7
The polystyrene strips can also be bundled together to form
maximum 500 mm wide x various mm deep Polyslab blocks
which are placed as fillers on shuttering separated by 20 mm
thick x various mm wide rib and cross rib spacers to still achieve
a continuous polystyrene soffit which can be skim-coated with
Rinolite. This can also easily be used for 2 way spanning slabs.
This means that the Polyfloors will be the predominant choice
for suspended slabs and enables a new patent to be established
as an alternative to the Polyslabs and Polystairs which are no
longer valid in other nations and will be expiring in 2020 in South
Africa. They will generally be cheaper than the present
Polyslab&Polystair systems as only the rib formers have to be
ordered from the factory and can also be formed from recycled
polystyrene rather than having to use 24 kg/cum density.
The disadvantage over the current Polyslab system is that the
polystyrene is no longer the sole formwork medium but has to
be placed on conventional steel or timber shuttering. The
required temporary supports for these though is substantially
reduced than is required for solid reinforced concrete slabs as
the revised Polyslab systems are much lighter. The other
advantage of the revised Polyslab is that the rib spacer is only 20
mm rather than 60 mm thick resulting in a 40 mm lesser overall
slab thickness and a 40 mm reduction in the thickness of the
blocks. The revised system is also safer as it does not rely on the
strength of the blocks supported by the floor centres which often
are a deterrent for specification by Clients, Architects &
Engineers.
DESCRIPTION OF NEW BLOCKS AND
CONSTRUCTION PROCEDURE

14. POLYSTAIRS
Stairs are normally a builder’s nightmare.
Polystair construction is simple, based on the same system
as the Polyslab but placed at the required slope.
The polystyrene treads are optional, placed on the wet concrete.
Bird wire mesh is dressed over the treads and later screeded with
one or two layers of 1 part cement : 2 river sand : 2 plaster sand.
POLYSTAIRS
Decorating down lights can easily be installed and must be low
emission globes, the conduiting is easily housed in the
polystyrene ceiling.

15. POLYFLOORS
1. The Polyfloor system is extremely cost effective for spans
below 5 metres, easily erected and provides excellent free
Insulation.
2. This new system can be manufactured on site by the
contractor on the ground floor slab thus saving on transport
costs.
3. POLYFLOORS are approximately 50% lighter than
equivalent conventional concrete slabs, which make them
ideal as 1st floors over existing single story houses as
seen on the photo below.
4. The POLYFLOOR systems only require 1 line of
temporary supports.
POLYFLOORS

16. GOING DOUBLE STOREY ?
Client’s brief: To provide an additionalfloor without
having to move out and without having to underpin
foundations.
Polyform Solution:
1. Build up external walls to support steel beams at 3m
centres to clear roof and support unpropped Polyfloor
panels.
2. Weld or bolt posts at ends of beams with a rail at the
top to support tops of Polywall panels.
3. Reinforcement projecting from bottom of wall panels are
cast into the concrete topping.
2 and 3
GOING DOUBLE STOREY ?
1. Existing roof
Finished home

17. POLYSTRUCTURES
Cost saving - a Quantity Surveyor's cost comparisons
indicate Polyform to be the following :
1. 41% on 230 mm common brick walls
2. 21% on M150 hollow block wall
3. 44% of Polyroofs over insulated sheeted or tiled roofs for
on site constructedstructures The flat roof can be designed
As a future first floor
4. Energy saving - The polystyrene in the walls and roof slabs
provide excellent insulation.
5. Fully tested - satisfactorilytestedfor fire [69 minute
resistance],water penetration,impact, chisel penetrationand
sound proof.
6. Simple construction- Ideal for do it yourself and community
involvement
POLYSTRUCTURES
7. Versatile- Polystructures can be constructed as mobile structures as a A
frames and Mobile bersions as seen
in the next slides or on site as in this photo.
8. In the on site constructed case conventional strip footings are
used and the Polypanelsare placed into slots formed using a
polystyreneslot former. Once the concrete has set this is
removed and the panels are placed verticallyaround the structure.
9. An even more cost effective and attractive alternative is the “ Poly A
Frame” where roof panels are erected in an “A” formation on a
Polygroundslab and both faces are plastered. By using a Polyfloor
the upper space can be used for additional accommodation

18. RDP Housing

19. NEW APPLICATION OF POLYWALLS
• 20 storey photo
This type of building can
now be constructed
manually using the new
Polyform technique
NEW APPLICATION OF POLYWALLS
Ground floor wall panel
used in a 20 storey building
can be handled by 2 men

20. MOBILE POLYSTRUCTURES
The patent allows Polystructures to be manufactured in a factory and transported to site
using a crane truck and placed on a level compacted sand bed.
10. Versatile- The Polyroofscan be flat or pitched up to 15
degrees.
11. By raising the ceiling Polybunks can be installed providing
extra accommodationor storage.
12. Shaped polystyrene copings can be supplied for aesthetic
effects and deeper ones can be used on flat Polyroofsto
provide water storage.
13. Mobile structures can be docked together or placed on top of
one another.
14. Some municipalities do not charge rates as mobile
structures can be considered temporary.
MOBILE POLYSTRUCTURES
The patent allows Polystructures to be manufactured in a factory and transported to site
using a crane truck and placed on a level compacted sand bed.

21. Polypartitions
Both internal and external Polypartitions are further expressions of the
The advantages over standard dry wall partitioning are cost, fire and acoustic resistance. The advantage over
brick or block partitions is that they are far lighter which saves on the design of suspended slabs and the whole
structure including foundations and reduces lateral forces generated by earthquakes.
The ground partitions do not require any foundations at all and are installed once the roof is in place.
The Internal Polypartitions generally use 5O mm x 500 mm thick recycled polystyrene panels either full height or
lower level. The latter fit into inverted cold formed steel channels at the top spanning between the end
walls. The former are taken into the ceiling and are supported with battens on either side.
the concrete slab and the screed is used to provide lateral support.
Generally there are 50 mm gaps left between the panels which are filled
with the plaster mix. Reinforcement as required by design is pushed flush into each side of the joint filler.
polystyrene faces are plastered to the specification provided by `Contest’ on the website.
Polypartitions
are further expressions of the Polystructures patent.
The advantages over standard dry wall partitioning are cost, fire and acoustic resistance. The advantage over
brick or block partitions is that they are far lighter which saves on the design of suspended slabs and the whole
structure including foundations and reduces lateral forces generated by earthquakes.
The ground partitions do not require any foundations at all and are installed once the roof is in place.
generally use 5O mm x 500 mm thick recycled polystyrene panels either full height or
lower level. The latter fit into inverted cold formed steel channels at the top spanning between the end
The former are taken into the ceiling and are supported with battens on either side. The bottoms sit on
the concrete slab and the screed is used to provide lateral support.
Generally there are 50 mm gaps left between the panels which are filled
with the plaster mix. Reinforcement as required by design is pushed flush into each side of the joint filler. Both
polystyrene faces are plastered to the specification provided by `Contest’ on the website.

22. POLYPARTITIONSPOLYPARTITIONS
• Text & construction drawingBoth internal and external
Polypartitions are further expressions of the
Polystructures patent. The advantages over standard dry
wall partitioning are cost, fire and acoustic resistance.
The Advantage over brick or block partitions is that they
are far lighter which saves on the design of suspended
slabs and the whole structure including the foundations
and reduces lateral forces generated by earthquakes.
•
• The ground partitions do not require any foundations at
all and are installed once the roof is in place. The
internal Polypartitions generally use 50 mm x 50 mm
thick recycled polystyrene panels either full height or
lower level. The latter fit into inverted cold formed steel
channels at the top spanning between the end walls.
The former are taken into the ceiling and are supported
with battens on either side. The bottoms sit on the
concrete slab and the screed is used to provide lateral
support.
• Generally there are 50 mm gaps left between the panels
which are filled with the plaster mix. Reinforcement as
required by design is pushed flush into each side of the
joint filler. Both faces are then Ferro-cement plaster to a
specification provided by Contest which adds to the
overall strength of the wall

23. POLYSTRUCTURES ARE EARTHQUAKE AND
STORM RESISTANT
The invention grew out of a visit to the earthquake devastated
areas in Turkey
There are some 50 countries which are earthquake prone which
includes Turkey and South Africa. Many more are also prone to
other natural disasters like tornados & cyclones which cause
massive destruction to lives and structures.
http://mceer.buffalo.edu
( Multidisciplinary Center for Earthquake Engineering Research )
Issued a paper substantiating that POLYSTRUCTURES have 5
unique earthquake resistant qualities
POLYSTRUCTURES ARE EARTHQUAKE AND
STORM RESISTANT
The invention grew out of a visit to the earthquake devastated
There are some 50 countries which are earthquake prone which
includes Turkey and South Africa. Many more are also prone to
other natural disasters like tornados & cyclones which cause
( Multidisciplinary Center for Earthquake Engineering Research )
Issued a paper substantiating that POLYSTRUCTURES have 5
EARTHQUAKE DAMAGES LOW &
HIGH RISE BUILDINGS
PREVENTION IS BETTER THAN CURE !!
- * Specify POLYSTRUCTURES *

24. 1. LIGHT WEIGHT
Newton's Law
Acceleration has this important influence on damage,
because, as an object in movement, the building
obeys Newton' famous Second Law of Dynamics. The
simplest form of the equation which expresses the
Second Law of Motion is
F = MA. ( force = mass x acceleration )
LIGHT WEIGHT
The Polyslab was used in this building which saves 50 % over
a solid reinforced concrete slab.
If the brickwork was replaced by Polywalls the total reduction
in weight would be 70%
Therefore the reduction of the destructive force is a massive
70%!!!

25. 2. SHALLOW FOUNDATIONS
Earthquakes shake the building via the foundations.
NORMAL DEEP FOUNDATIONS
ALLOWS SEVERE SHAKING OF BUILDINGS
SHALLOW FOUNDATIONS
SHALLOW POLYSTRUCTURES FOUNDATIONS
“RIDE” EARTHQUAKES
Earthquakes shake the building via the foundations.

26. 3. FLEXIBLE
The reinforcement in the
therefore causes
its original shape The polystyrene is soft and cannot cause
injury to occupants
FLEXIBLE
The reinforcement in the Polypanels is ductile and
therefore causes Polystructures to be flexible and restore
its original shape The polystyrene is soft and cannot cause
injury to occupants
Conventional construction of brick or block
work are rigid and therefore subject to
cracking and disintegration causing injury
and fatalities to occupants.

27. 4. POLYSTRUCTURES ABSORB DESTRUCTIVE
VIBRATIONS
Polystyrene is used universally in packaging
to protect goods from shock damage
POLYSTRUCTURES ABSORB DESTRUCTIVE
VIBRATIONS
Brick building shattered by earth quake
vibrations

28. 5. COHESIVE CAGE
Polystructures retain the integrity and shape of the
buildings like a cage
The reinforcement in the ribs to the
Polywallpanels in Polystructures is
built into the ground and roof slabs forming
frames every 250 mm centres thus surrounding
and holding the structures together. This is
further assisted by the reinforced ring beam
over the openings
COHESIVE CAGE
Conventional construction disintegrating

29. POLYRESERVOIRS &
POLYPOOLS
The poly reservoir system is an adaptation
of the circular precast Ongamanzi system
which we used in rural Umgeni Water
projects in KZN.
They have the further advantages that
they do not require foundations and arte
a lot cheaper and easier to construct.
Because of the predominant use of
polystyrene they also are more
waterproof.
The Polypools also have these advantages
and the insulation allows them to be used
throughout the year. The rectangular
version requires small footings and the
corners require to be strapped after
plaster has been applied. These can also
be used above ground level to provide
security to toddlers and double up as
reservoirs or below ground level.
POLYRESERVOIRS &
POLYPOOLS

30. POLYRETAINING
• Photoof circular reservoir & drawing
POLYRETAINING WALLS
•
They can be used for basements and
freestanding situations
The Polyfloor can span some 4 metres
without temporary supports and is
inexpensive
The Polywalls need only be some 100
mm thick with light reinforcement
The foundations can be small as the
wall is designed as a propped retaining
wall
The panels for the walls and floor can
be manufactured on site
The construction is very quick and easy
Only the 800 mm high part of the wall
in contact with the soil requires
waterproofing

31. POLYPALISADE FENCING
text
• Drawing of Polypalisade
3. Polypalisade and footing
POLYPALISADE FENCING

32. SUMMARY OF POLYFORM PATENTS AND OTHER ADVANTAGES
1. THE POLYSLAB & STAIR PATENT IS VALID FOR ANOTHER 5 YEARS IN S
2. THEY HAVE GAINED THE HIGHEST AWARDS WITH THE SPECIAL COMMENDATION OF THE INTERNATIONAL JURY
PRESTIGIOUS GENEVA INTERNATIONAL EXHIBITION FOR INVENTORS IN 1999
3. THEY NOW HAVE A 15 YEAR TRACK- RECORD WITHOUT A SINGLE FAILURE
4. THE NEW POLYRIBSLAB INVENTION PROVIDES AN EVEN MORE COST EFFECTIVE
PROTECTION PERIOD BY A FULL 20 YEARS. THEY USE THE WAIST CUT
IN POINT 8. BELOW.
5. THIS, TOGETHER WITH THE POLYFLOOR SYSTEM WHICH IS PART OF THE
OPTIMUM FLOOR THICKNESS FOR ANY SPAN UP TO 10 METRES.
HAVE NO RIVAL IN THE WORLDWIDE USE OF CONVENTIONAL REINFORCED CONCRETE AND
SYSTEMS FOR SUSPENDED SLABS.
6. POLYFORM HAS A TRADEMARK WHICH PROTECTS THE NAME
7. THE POLYSTRUCTURES INVENTION HAS 54 UNCONTESTED NOVEL FEATURES
FOR 20 YEARS AGAINST BEING COPIED. THEY PROVIDE GOOD ASSETS
8. THE SAME BASIC PANEL IS USED FOR THE CONSTRUCTION OF SUSPENDED & GROUND SLABS, STAIRS,
STRUCTURES, BRIDGES, CULVERTS, PROPPED RETAINING WALLS, FENCING, SWIMMING
9. THERE ARE FURTHER RELATED PRODUCTS AVAILABLE IN THE LICENSE PACKAGE:
PARTITIONS & POLYSTYRENE MOULDS FOR PRECAST CONCRETE PRODUCTS.
IMPROVEMENTS TO ALL FORMS OF CONSTRUCTION SYSTEMS IN EVERY USE OF CONVENTIONAL REINFORCED CONCRETE OR
ALTERNATIVE SYSTEMS.
10. POLYSTRUCTURES ARE UNIQUELY RESISTANT TO ALL FORMS OF NATURAL DISASTERS
FIRE. THE `A’ FRAME PROVIDES IMMEDIATE LONG-TERM SHELTER IN REFUGEE AND DISA
11. THE BUILT-IN RECYCLED POLYSTYRENE PERFORMS WELL IN GREEN
and other resources; Protecting occupant health and improving employee productivity
environmental degradation
12. THEY HAVE BEEN FULLY TESTED AND CERTIFIED BY AGREMENT
BRICK WALL STRUCTURES WITH SHEETED ROOFS. DOCUMENTATION WITH CALCULATIONS PROVING THEY CAN BE USED
10 STOREY STRUCTURES HAS BEEN SUBMITTED FOR CERTIFICATION BY AGREMENT.
13. THEY ARE VERY EASILY MANUFACTURED ON SITE IN COMMUNITY HOUSING PROJECTS
PROVIDING LABOUR OPPORTUNITIES FOR THE COMMUNITY
14. WE HAVE EXHIBITED OUR PRODUCTS AT SHOWS IN MID-RAND
ANGOLA.
15. THE DEPARTMENT OF TRADE AND INDUSTRIES[DTI] INVITED US TO BE PART OF A
TO DAR ES SALAAM, A NATIONAL PAVILLION IN CHINA AND SUBSIDISED PRIMARY MARKETING TRIPS TO THE USA, UAE
HONG KONG
16. WOLF HAS BEEN ON FOLLOW-UP TRIPS TO TURKEY WHERE WE HAD AN AGENCY FOR 2 YEARS, TWICE TO CHINA AND INDIA AND
THREE TIMES TO NEPAL
17. POLYSTRUCTURES PATENTS ARE BEING REGISTERED IN SA, CHINA, USA AND NEPAL
SUBSIDISED BY THE DTI IN THEIR PLANS TO GENERATE 2 WAY TR
NATIONS.
18. POLYFORM LICENCES HAVE A LOW ENTRY FEE MAKING THEM EASILY AFFORDABLE TO ALL
19. THE POLYFORM SYSTEMS DO NOT REQUIRE EXPENSIVE EQUIPMENT
20. THE POLYFORM SYSTEMS DO NOT REQUIRE EXPENSIVE MOULDS
MANUFACTURED ON SITE
21. WE GET INVOLVED IN DISASTER AREAS OFTEN OFFERING OUR EXPERTISE AND SERVICES PRO
22. WE PROMOTE GOOD LIVING STANDARDS AND GODLY BEHAVIOUR THROUGH OUR MISSION STATEMENT.
Polyform Polystructures (Pty) Ltd Reg No/22/07/2013
SUMMARY OF POLYFORM PATENTS AND OTHER ADVANTAGES
IS VALID FOR ANOTHER 5 YEARS IN SOUTH AFRICA.
WITH THE SPECIAL COMMENDATION OF THE INTERNATIONAL JURY AT THE MOST
PRESTIGIOUS GENEVA INTERNATIONAL EXHIBITION FOR INVENTORS IN 1999
WITHOUT A SINGLE FAILURE
AN EVEN MORE COST EFFECTIVE ALTERNATIVE SYSTEM EXTENDING THE
THEY USE THE WAIST CUT-OUTS FORMING THE SLOTS IN THE POLYPANELS ENUMERATED
TOGETHER WITH THE POLYFLOOR SYSTEM WHICH IS PART OF THE POLYSTRUCTURES PATENT GIVES THE CHOICE OF THE
FOR ANY SPAN UP TO 10 METRES. ADD TO THIS THE SAVING IN ENERGY COSTS AND WEIGHT THEY
CONVENTIONAL REINFORCED CONCRETE AND ALTERNATIVE PRECAST CONCRETE
WHICH PROTECTS THE NAME FROM BEING USED BY OTHER COMPANIES IN SA
E POLYSTRUCTURES INVENTION HAS 54 UNCONTESTED NOVEL FEATURES WHICH PROVIDES EXTREMELY GOOD PROTECTION
THEY PROVIDE GOOD ASSETS FOR THOSE BUYING POLYFORM LICENCES
IS USED FOR THE CONSTRUCTION OF SUSPENDED & GROUND SLABS, STAIRS,, EXTERNAL WALLS,, MOBILE
STRUCTURES, BRIDGES, CULVERTS, PROPPED RETAINING WALLS, FENCING, SWIMMING POOLS & CIRCULAR RESERVOIRS,.
THERE ARE FURTHER RELATED PRODUCTS AVAILABLE IN THE LICENSE PACKAGE: BEAMS, LINTELS, FOUNDATIONS, INTERNAL
PARTITIONS & POLYSTYRENE MOULDS FOR PRECAST CONCRETE PRODUCTS. IN OTHER WORDS POLYFORM OFFERS VAST
LL FORMS OF CONSTRUCTION SYSTEMS IN EVERY USE OF CONVENTIONAL REINFORCED CONCRETE OR
UNIQUELY RESISTANT TO ALL FORMS OF NATURAL DISASTERS - EARTHQUAKES, HURRICANES, FLOODING &
TERM SHELTER IN REFUGEE AND DISASTER CAMPS
GREEN CONSTRUCTION DEFINED AS: Efficiently using energy, water,
Protecting occupant health and improving employee productivity; Reducing waste, pollution and
CERTIFIED BY AGREMENT WHO STATE THEY PERFORM EQUAL TO OR BETTER THAN 230 MM
DOCUMENTATION WITH CALCULATIONS PROVING THEY CAN BE USED FOR UP TO
SUBMITTED FOR CERTIFICATION BY AGREMENT.
COMMUNITY HOUSING PROJECTS AND ERECTED BY UNSKILLED LABOUR THUS
RAND, 3 ROYAL SHOWS, TWICE IN GENEVA, ONCE IN TURKEY AND ONCE IN
INVITED US TO BE PART OF A TRADE MISSION TO TURKEY IN 2013 AND NOW
NATIONAL PAVILLION IN CHINA AND SUBSIDISED PRIMARY MARKETING TRIPS TO THE USA, UAE, EGYPT, &
TURKEY WHERE WE HAD AN AGENCY FOR 2 YEARS, TWICE TO CHINA AND INDIA AND
PATENTS ARE BEING REGISTERED IN SA, CHINA, USA AND NEPAL. WE HAVE BECOME RECOGNISED AND
SUBSIDISED BY THE DTI IN THEIR PLANS TO GENERATE 2 WAY TRADE AND GENERATE FOREIGN EXCHANGE IN THESE AND OTHER
MAKING THEM EASILY AFFORDABLE TO ALL
DO NOT REQUIRE EXPENSIVE EQUIPMENT
DO NOT REQUIRE EXPENSIVE MOULDS – THE POLYSTYRENE IS THE MOULD AND THE PRODUCTS CAN BE
WE GET INVOLVED IN DISASTER AREAS OFTEN OFFERING OUR EXPERTISE AND SERVICES PRO-BONO
WE PROMOTE GOOD LIVING STANDARDS AND GODLY BEHAVIOUR THROUGH OUR MISSION STATEMENT.

33. LUCRATIVE EXCLUSIVE POLYFORM LICENCES
Attention all Builders, Entrepreneurs,
Limited exclusive Polyform Licences
Besides Agrement certification Polystructures
•Half the price of the standard brick house
even less
•Very easily constructed – ideal for DIY and
•Resistant to earthquakes, violent storms
•Internal partitions require no foundations
•Patented & Trademarked - only Polyform
Polyform & Polystructure Building Systems
and improved. A provisional patent is being
systems which means that Polyform has
reinforced concrete systems.
•Licensees only pay a once off fee valid
licence is R99 000 and for a NATIONAL is
•Their Structural Engineer pays Polyform
R10 000
•One day’s training at Polyform Headquarters
•A 9% royalty on the polystyrene from
into the rates for the products
LICENCES ON OFFER
Developers & Polystyrene factories
are on offer in each province
Polystructures are normally
house and the Poly A frame structures are
and mass housing projects [RDP]
storms and flooding, burglar proof roofing
foundations
Polyform Licensees can trade with all the
Systems which are constantly being added to
being registered for a further six products
has an alternative to most conventional
valid for 1 year. The fee for a PROVINCIAL
is R190 000
Polyform a yearly technical support fee of
Headquarters is included in these fees
from the factory they choose which is built

34. REQUIREMENTS TO OPPERATE A POLYFORM
LICENCES
WHAT DO YOU NEED TO RUN A POLYFORM LICENCE BESIDES THE FEES
1. A POLYSTYRENE MANUFACTURER WITHIN 5OOkm
2. AN OFFICE WITH A SECRETARY/RECEPTIONIST
3. A FOREMAN, WELDER, 2 LABOURERS + A PLASTERER
4. WHEELBARROWS, WELDING MACHINE, SPADES , TOOLS
5. AN APPROXIMATELY 200 SQM PAVED LEVEL AREA
FOR MANUFACTURE
6. A PICK UP VAN AND TEMPORARY SUPPORTS AND A TEAM FOR
ERECTION & CONSTRUCTION
7. STORE ROOM FOR CEMENT ETC.
8. ADVERTISING FOR WHICH WE PROVIDE THE ARTWORK. THE WEBSITE
IS CONSTANTLY BEING UPDATED WITH NEWS TO WHICH YOU CAN
CONTRIBUTE
9. A LOCAL STRUCTURAL ENGINEER
IF YOU ARE CONTRACTOR YOU WILL HAVE MOST OF
THESE, SO AT VERY LITTLE EXTRA RUNNING COST YOU
HAVE THE POTENTIAL OF VASTLY INCREASING YOUR
INCOME.
REQUIREMENTS TO OPPERATE A POLYFORM
LICENCES
WHAT DO YOU NEED TO RUN A POLYFORM LICENCE BESIDES THE FEES ?
6. A PICK UP VAN AND TEMPORARY SUPPORTS AND A TEAM FOR
8. ADVERTISING FOR WHICH WE PROVIDE THE ARTWORK. THE WEBSITE
IS CONSTANTLY BEING UPDATED WITH NEWS TO WHICH YOU CAN