A qualified electrician indicates that there are two electrical installation classifications based on types of installations according to their voltage and their use for residential buildings.
High voltage electrical installations
These high voltage electrical installations are mostly used by industrial facilities. On the other hand, in this type of electrical installation, energy is transformed into low voltage so that the end user can consume it. The sectors that use high voltage are usually the industrialists and then the consumer.
Low voltage electrical installations
Low voltage installations are those that generate or distribute electrical energy for the own consumption of final customers, although the definition is extended to AC receivers of 1000 volts or less and DC receivers of 1500 volts or less.
BASIC ELECTRICAL INSTALLATIONS INSIDE THE HOUSE
Socket: Sockets are better known as plugs. They are measured by the amount of intensity (amps) they support.
Unipolar switch: Allows you to control one or more luminaires from a single point.
https://pointaelectric.com/
2. • Power: the energy from the outside reaches the
receiving installation through this section.
• Protections and safety features: they prevent
overloads and short circuits, as they ensure the
health of people and the integrity of goods.
• Conductors: the conductors of an electrical
installation are the wires and cables through which
the current circulates to the components of the
entire installation.
The receiving electrical installations have
five distinct parts:
3. • Control and maneuver: switches and relays are
responsible for intervening in the flow of energy.
They are used to regulate the electric current,
disconnect it and connect it when necessary.
• Consumption points: they are the final
receivers of energy and those responsible for
transforming it into another type such as
luminous, thermal, or mechanical, among
others.
4. Now that we know the different types of
installation that distribute electricity to a
home, the best electrician indicates that
these are the basic facilities for your home.
6. • Socket: Sockets are better known as plugs. They
are measured by the amount of intensity (amps)
they support.
• Unipolar switch: Allows you to control one or
more luminaires from a single point.
• Two Switches: Allows to control one or more
lamps from two different points.
7. • Two switches and crossover key: It allows to
control one or more lamps from three different
points.
• Pushbutton: Allows you to act on a device during
the time the pushbutton is pressed.
8. An expert electrician recommends knowing
what type of installation you have to supply
electricity to your home.
9. Fortunately, a qualified electrician may
provide electrical installation and
maintenance services.
