Already bought VCDS VAG 11.11 or vag com 11.8 diagnostic interface. You may meet problem--error: does not work , (not plugged into car message / interface worx) and cant update it to Vag com 12.10.3. Below OBD2Tuning sharing How to fix China vag com VCDS diagnsotic interface FT232R chip protection.
How to fix China vag com VCDS diagnsotic interface FT232R chip protection2
1. ADK obd2tuning technology CO.,LTD
Web: www.obd2tuning.com
Skype: ADKobdtools
How to fix China vag com VCDS diagnsotic interface
FT232R chip protection
Already bought VCDS VAG 11.11 or vag com 11.8
diagnostic interface. You may meet problem--error: does
not work , (not plugged into car message / interface worx)
and cant update it to Vag com 12.10.3. Below OBD2Tuning
sharing How to fix China vag com VCDS diagnsotic
interface FT232R chip protection.
Vag com 11.11 cable vcds 11.11 crack vcds hex usb
interface
2. What we need do to fix VCDS interface FT232R chip
protection error?
Here OBD2Tuning share with you the solution steps
Step 1: Reflash Atmega with dump. Firstly, supply 12V power
to the Vag com VCDS interface, Connect ATMEGA 162 chip
with port LPT of the pc to program it as shown on this picture:
3. Step 2: Remove components IC8, R50, R51, D7 as shown on
the pic with red arrows.
4. Step 3: Reflash FTDI with dump.
Step 4: Reflash GAL16V8 (ATF16V8) with dump.
5. Step 5: Solder 3 wires as shown on the pic with blue lines.
Step 6:Copy loader to your VCDS directory.
Q: When plug the vag com 11.11 with your pc, it is not
recognised and comes up as "FFFFFFFFFFFFF". It worked
fine for the first 2-3 times. Any advise please?
A: Reprogram it, you need Reflash the china vag com
6. When vag com have any question, you must program
Atmega162 with an external programmer. After that you need
to program FTDI over USB with Mprog
For RL cable you must program GAL/ATF - I assume that you
have a RL cable because you asked loader and for RL cable
you need to do some modifications to the PCB, then install
VCDS 11.11.0 and copy loader to installation folder. Make a
shortcut to your desktop (loader). Every time you want to use
VCDS -- click the shortcut on the desktop
Here you have a tutorial for programming Atmega chip(vag
com)
The document free download:
Chinese RL cable repair.rar
vag com 11.11 full dump.rar
FT232RL.rar