1. CURRICULAM VITAE
Muhammad Irshad Ali
Madinat Khalifa South
Doha-Qatar.
E-mail: irshad_2409@yahoo.com
Contact -: +974 70146553
Visa Status : Resident Valid Visa with NOC and Qatar driving license
Position Applied:
Civil Engineer
Objectives and Goals:
Expecting a challenging and dynamic career in civil engineering where I can apply my
knowledge and skill development. To work in a company with an effective environment
conductive for personnel success, intellectual growth and career advancement and to achieve
a position that would offer job satisfaction and channels for knowledge gained.
Educational Qualification:
Civil Engineering from Board of Technical, Bangalore-India.
Worked Experience: Ten Years (10 yrs)
Experience in Gulf:
1).Currently working in Gulf Engineering and Industrial Consultancy New industrial, Doha-
Qatar as a Civil Engineer.
Project handle:
I: Project title : CONSTRUCTION OF LOGISTIC VILLAGE QATAR PHASE-2 &3
Position : Civil Engineer
Location : New Industrial Area - DOHA-QATAR
Client : GULF WAREHOUSING COMPANY.
Job Responsibilities
Achieving Construction Activities like Excavation, Foundation, PCC, Waterproofing, RCC
and Shuttering, steel fixing, casting concrete, masonry for brick works and plastering Tile
fixing Etc.up to completion. Independently following with Design engineers of, Architecture,
and Structural Updated drawing for minor changes, as per site requirement needed and
Inspection before casting Columns, Slabs.Etc…
Looking after construction activities, making requisition and facilitating the arrangement
Procurement of construction materials. Executions of civil, interior and exterior ground finish
works and Site Supervision.
Project handle:
I: Project title : CONSTRUCTION & COMPLETION FOR THE RENOVATION OF
CAMEL RACE TRACK AT SHAHANIYA
Position : Civil Engineer
Location : Al-Shahaniya - DOHA-QATAR
Client : PRIVATE ENGINEERING OFFICE.
Job Responsibilities:
2. Achieving Construction Activities like Excavation, Foundation, PCC, Waterproofing, RCC
and Shuttering, steel fixing, casting concrete, masonry for brick works and plastering Tile
fixing Etc.up to completion. Independently following with Design engineers of, Architecture,
and Structural Updated drawing for minor changes, as per site requirement needed and
Inspection before casting Columns, Slabs.Etc…
Looking after construction activities, making requisition and facilitating the arrangement
Procurement of construction materials. Executions of civil, interior and exterior ground finish
works and Site Supervision.
Experience in Gulf:
2).Worked in Fugro-Suhaimi Ltd.Dammam, kingdom of Saudi Arabia,as a Civil Site
Engineer(JAN 2006 to MAR 2009)
Project handle:
I: Project title: SAUDI ARAMCO SHBAB-1P/L CAPACITY EXPANSION SHBAB-2P/L
Position : Civil Site Engineer
Location : Shaybha-GOSP-4 Sabkha-39(Shaybah-K.S.A)
Client : STROYTRANSGAZ CO.
Job Responsibilities:
Inspection activities on civil works,civil erection accordance to the approved quality
assurance plan
Inspection of QA/QC procedures of client/consultant.
Conduct daily surveillance and civil works inspection in accordance to approved
plans and standards.
Check and monitoring all incoming materials utilization with vendor’s approvals as
per client’s standard.
Prepare a request for inspection (RFI) and checklist in accordance to approved
inspection technical procedures (ITP) prior to commence of work.
Inspection of concrete and Asphalt batch plants productions, inspection of Uniformity
testing of Batch plants as per Saudi Aramco Engineering standards and specifications.
Witnessing the backfilling, earth works, concreting, grouting and Asphalt Quality
testing on construction sites and batch plants.
III : Project title: SAUDI ARAMCO250 MBCD AXL SHAYBAH EXPANSION
PROJECT OVER HEAD TRANMISSION LINE II
Position : Civil Site Engineer
Location : Shaybha-GOSP-4 Sabkha-39
Client : Energy and Power Contracting Company
Job Responsibilities:
Concreting for tower foundation 1 to 44 no’s, Erection of towers and access road from
tower 1 to 44 toatal 10Km road.
Inspection and checking of elevations as per approved plans.
All calibration of concrete and Asphalt Batch Plants submitted to Project Engineer for
approval of concrete and Asphalt work.
Inspection of form works before concreting, rebars and spacing.
Inspection of concrete before pouring, Witnessing quality testing on site.
Witnessing compaction testing, asphalt quality testing on site and plant.
Inspection and checking of elevations cables, sub grade, sub base, aggregate base
course, mc-1, Asphalt thickness and final grading Asphalt road as per approved plans.
3. Installation of precast panel foundation slab, column and walls at site.
IV: Project title: SAUDI ARAMCO SHAYBAH POWER GENERATION PROJECT.
Position : Site Engineer
Location : Shay bah, K.S.A
Client : HYUNDAI HEAVY INDUSTRIES CO.LTD
Job Responsibilities:
Prepare a Request for Inspection (RFI) and checklist in accordance to Ministry of
Defense approved inspection procedures and standards.
Inspection and checking of elevations as per approved plans.
Inspection of concrete and Asphalt batch plants. Checking calibration of batch plants,
laboratory equipments and calibration certificates.
All calibration of concrete and Asphalt Batch Plants submitted to Project Engineer for
approval of concrete and Asphalt work.
Inspection of form works before concreting, rebar and spacing.
Quality test reports of materials, concrete and Asphalt mix design reports submitted to
Project Engineer for approval of concrete and Asphalt work.
Inspection of concrete before pouring, Witnessing quality testing on site.
Inspection and checking of elevations cables, sub grade, sub base, aggregate base
course, mc-1, Asphalt thickness and final grading Asphalt road as per approved plans.
Experience in India:
1).Worked in Arman and Anna Infra-Project Andhra Pradesh India as Civil Site
Engineer.
Project title: Arman and Anna Infrastructure.
Position : Civil Engineer (AUG 2009 to DEC 2010)
Location : Vizag steel plant, A.P, India.
Job Responsibilities:
Supervision for all construction activities including estimating costing for steel and
concrete works.
Check plumbing for chimney alignment and check radius, wall thickness as per the
drawing.
Installation of Wind stake plates, corbels and other plates as per the angle mention in
the drawing.
Check submittals of dismantling procedures for client approval.
2). Worked in S.F Construction Co.Ltd, Mumbai India as a Civil engineer
Project title: Maintenance Of Building Works
Position : Civil Engineer( APR 2001 to MAR 2002)
Location : Mumbai, India
Project Description:
The project involves supervisor for Plaster and panting for Walls, Doors and windows
Etc.Arranging of Materials & scheduling of Manpower, scheduling of activity as per given
time.
3). Worked in Bharat Builders & Developers. Karnataka, India. As Civil engineer.
Project title: INDERDAS SHOPPING MALL BUILDING.
Position : Civil Engineer(APRIL 2002 to DEC 2004)
Location : Karnataka, India
4. Project Description:
The project involves supervisor for checking concrete of Beams, column & slabs, flooring
water proof & plaster works. Plumbing & Electrical works for Doors, Windows, Sliding,
Frames fixing etc.Arranging of Materials and scheduling of Manpower, scheduling of activity
as per given time.
4). Worked in G.M Bijlani Construction Ltd. In Mumbai as Civil Engineer
Project title: COSTRUCTION OF G-14 BUILDING FOR RELIANCE LTD.
Position : Civil Engineer
Date : JAN 2005 to OCT 2005
Location : Mumbai, India
Project Description:
This project is situated in one of the exclusive subdivision in India. Which involve for
excavation and backfilling for foundation and grade slab, concreting works, installation of
Electrical ,water and sewer utilities, finishing and other activities.
Technical Skills:
Oil & Gas Construction, Buildings, Road constructions and supervision.
Worked in accordance with Saudi Aramco Standards.(SAIC-Q-1060/1061,SAIC-Q-
1001/1002,SAIC-Q-1005/1006,SAES-A-114,SAES-Q-006 and SAES-Q-010)
Implementation of QA/QC program.
Inspection activities on earth works, concrete, cement grouting, asphalt works, civil
structural works and civil erection in accordance to the approved Quality Assurance
Plan (QAP).
Computer Skills:
Drafting tools: AutoCAD 2006/2007.
Packages: MS Office Applications
Operating systems: Windows 9x/2000/XP/Vista.
Personal Strength:
Excellent communication skills.
Hardworking Sincerity and Honesty
Individual & team working Capability
Knowledge of 5M ( Minutes, Manpower, Material, Machine, Management )
Manage development of program strategies
Personal Details:
Date of Birth : 24th September 1978
Nationality : Indian
Religion : Islam
Marital Status : Married
5. Passport # : J3007549
Language Proficiency : Excellent in both Written & Spoken English, Arabic,
Hindi, Kannada
Email ID : irshad_2409@yahoo.com
Phone No : +974 70146553, +91 8867796805
Permanent Address : Islamabad Colony Gulbarga,
Karnataka-India
Place: Doha-Qatar
Date:
(Muhammad Irshad Ali)