STANDARD OF TOILET FOR HANDICAPED PEOPLE OR FOR DESABLE PERSON

1. DESIGN FOR DISABLE
– TOILET DETAILS
MUKUND SUTHAR & SAKSHAM GOYAL9/18/2016
1DESIGN FOR DISABLE - TOILET DETAILS

2. AIM
AS AN ARCHITECTOUR RESPONSIBILITY IS TO INTEGRATE DISABLE
PEOPLE INTO THE SOCIETY IN ORDER FOR THEM TO TAKES AN
ACTIVE PART IN SOCIETY AND LEAD A NORMAL LIFE. TO BE ACTIVE, A
DISABLE PERSON SHOULD ABLE TO COMMUTT BETWEEN HOME,
WORK AND OTHER DESTINATIONS THE TECHNICAL AIM OF THE
PRESENTATON IS TO PROVIDE A BARRIER-FREE ENVIRONMENT FOR
THE INDEPENDENCE, CONVENIENCE AND SAFETY OF ALL PEOPLE
WITH DISABILITY.
IN THE PHYSICAL TERMS, THE PROVISIONAL OF A BARRIAER-FREE
ENVIROMENT CAN BE THE UNDERSTAND IN FOUR COMPLEMENTARY
DOMAIN :-
INSIDE BUILDING
IN THE IMMEDIATE VICINITY OF BUILDINGS
ON THE LOCAL ROAD AND PATHS
IN OPEN AREA AND RECREATIONAL AREAS. 9/18/2016
2
DESIGN FOR DISABLE - TOILET DETAILS

3. SIGNAGES
9/18/2016
3
DESIGN FOR DISABLE - TOILET DETAILS

4. SPACE REQUIREMENT
9/18/2016
4
DESIGN FOR DISABLE - TOILET DETAILS

5. TOILET LAYOUT
SOME POINTS TO REMEMBER :-
 THE MIN. SIZE SHALL BE 1500 X 1750 mm.
 TURNING CIRCLE OF 1500mm DIA ARE RECOMMENDED
INSIDE THE WASHROON TO ALLOW FOR FULL TURN
MOVEMENT OF A WHEELCHAIR.
 THE PARALLEL APPOACH, WHICH IS THE EASIEST.
 THE DIAGONAL
APPROACH. WHICH
IS DIFFCULT
9/18/2016
5
DESIGN FOR DISABLE - TOILET DETAILS

6. 9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
6
 TOILET FLOOR SHALL HAVE A NON-SLI SURFACE
WITHOUT ANY LVL. DIFFERECE.
 GUIDING BLOCK NEAR THE ENTRY SHOULD BE
HAVE A TEXTURAL DIFFERENCE, (E.G. DIAMON
TILES, PRIMA REGINA TILES, UNDRESSED
GRANITE).
 LIGHT WEIGHT PVC DOOR SHUTTER SHOULD BE
PROVIDED AS A SLIDING DOOR.
 PROVISIONAL OF VERTICAL & HORZONTAL RAIL AS
40mm C.P. STEEL PIPE.

7. TOILET LAYOUT - 1
9/18/2016
7
DESIGN FOR DISABLE - TOILET DETAILS

8. TOILET DETAIL – DOOR
9/18/2016
8
DESIGN FOR DISABLE - TOILET DETAILS

9. TOILET DETAIL – HAND RAIL
9/18/2016
9
DESIGN FOR DISABLE - TOILET DETAILS

10. TOILET DETAIL–
WATERCLOSET(WC)
9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
10
 FLUSH VALVE IS ON WIDE SIDE OF THE
ACCESSIBLR WATER CLOSET
 GRAB BARS REQUIRED

11. TOILET DETAIL–
WATERCLOSET(WC)
9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
11
 HEIGHT OF ACCESSIBLE WATER CLOSET SHALL BE
430 – 485 mm MEASURED TO THE TOP OF THE
TOILET SEAT.

12. TOILET DETAILS – SPACE &
REACH
9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
12
SPACE ALLOWANCE & REACH RANGES
 MIN CLEAR WIDTH FOR WHEELCHAIR
PASSAGE – 800 – 1000 mm.

13. TOILET DETAILS–
LAVATORIES&MIRRORS
9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
13
 Lavatories shall be mounted with the rim or
counter surface no higher than 850mm above
the finished floor Provide a clearance of at least
725mm above the finished floor to the bottom of
the apron.
 Clear floor space- 750mm X1200mm shall be
provided in front of lavatory.

14. 9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
14
TOILET DETAILS–
LAVATORIES&MIRRORS

15. 9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
15
 Hot water and drain pipes under lavatories
shall be insulated or otherwise configured
to protect against contact.
TOILET DETAILS–
LAVATORIES&MIRRORS

16. TOILET LAYOUT - 2
9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
16
 ACCESSIBLE TOILET AND SHOWER
COMPARTMENT

17. 9/18/2016DESIGN FOR DISABLE - TOILET DETAILS
17
TOILET LAYOUT - 2
 ACCESSIBLE TOILET AND SHOWER
COMPARTMENT