1. Curriculum Vitae
Mohamed EL-Badawy
SENIOR CIVIL STRUCTURAL ENGINEER
Objective
 Seeking a challenging career in a well-established, dynamic organization where
I can assist in achieving great organizational accomplishments, and acquire
personal actualization & development. Fully aware of the global codes (A.C.I.,
S.B.C., B.S., UBC1997, ASCE, IBC 2003 & IBC 2006 ...)
Personal Information
 Full Name : Mohamed Abd-Allah Mohamed EL-Badawy.
 Date of Birth : 22th
May 1984.
 Nationality : Egyptian.
 Gender : Male.
 Marital Status: Married.
 Address : El Zaher district, Makkah. Saudi Arabia. (Current address).
33 Baha El Din El-Ghatwary St., Smouha, Alexandria, Egypt.
 Cell phone : (+966)597217425 Saudi – (+2012)26566642 Egypt.
 Email : eng_mohammed_badawy@yahoo.com
Education
 Bsc in civil engineering- Alexandria University-2006.
Computer Skills & Training
Computer Skills:
 Word, Excel, Auto Cad 2000+
(2D), Surfer.
 SAP 2000.(May.2007)
 SAP 2000 v.16, SAFE v.14, ETAP v.9. (40hrs.) (Aug.2014).
 Primavera v6.8. (24hrs.) (Aug.2014).
Training courses:
 PMP Exam preparation course 4th
edition. (44hrs.) (Dec.2011).
 PMP Exam preparation course 5th
edition. (35hrs.) (Jan.2016).
 Negotiation Skills – Basics course.

2.  Introduction to Operation Management course (Dec. 2015).
 Completing the course SWOT Analysis.
 Completing the course Professional Conduct in Project Management (Jan. 2016).
 Attended 0ccupational safety comply with OSHA (10 hrs.) (Oct.2011).
 Completing the Safety & Health in Construction course (Jan. 2016).
 Design of Reinforced Concrete Structures due to ACI. using SAFE v.12. (Dec. 2014).
Languages
Arabic: Mother Tongue.
English: Very Good.
Experiences
Working at Saudi Binladin Group From Nov.2009 till Now:
Experience in Saudi Binladin Group.
Architecture & Building Construction Div.
From Nov.2014 till now:
Project: ABRAJ KUDAI Project (High Rise Building)
“ the largest hotel in the world (383.05m TALL) consisting of a ring of 12 towers 45
stories high, with more than 10,000 bedrooms, 70 restaurants, 5 rooftop helipads, 5
floors for the sole use of the Saudi royal family “
 Designer: Dar Al – Handasah.
 Owner: KSA Ministry of Finance.
 Consultant: Dar Al – Handasah.
 Estimated budget: 14.00 Billion SAR
 Location: Makkah – Saudi Arabia.
Position: Senior Technical office engineer.
Main job duties:
 Revise the shop drawing submitted from subcontractors.
 Preparing shop drawing (excavation levels, foundations, pedestals, huge columns,
shear & retaining walls, cores, corbels, all slabs types & beams, ramps, sump-pits,
tanks) & bar bending schedule (BBS). According to A.C.I Code.
 Quantity take-off for structural elements.
 Tower & Mobile Cranes Management Plan.( selection of locations for cranes due
to miscellaneous design drawing, critical area loads, erection, climbing &
dismantling , handling, maneuvering, bracing system, access roads serve project).
 Selection and follow up vertical elements which erecting by climbing formwork
system.

3.  Check and Redesign for some structure elements due to arch. modification and
consultant requirement.
 Design structural elements relative with escalators, elevators (Otis requirements)
and ensure implementation according to ACI.
 Design temporary structural members which support construction steps and
mobilization plan.
 Reviewing design calculations for formwork.
 Participating in logistic plan.
 Participate in preparing the construction method statements.
 Technical support by anticipated standard solutions and take initiative and provide
suggestions for site field.
 Preparation of R.F.I's (request for information) for any missing data or
contradictions in design drawings.
 Managing the approval with the consultant.
 Liaise with consultant and subcontractors.
 Lead brainstorming meetings including most involved stakeholders.
From Feb.2011 up to Nov.2014
Project: Haramain High Speed Rail Project (Makkah Station)” Project
designed over 320.000 m2
closed area with the facility of Concourse Building, Train
platform with 5 tracks, VIP drop of area, short stay car park, long stay car park,
mosque, helipad, fire station and other facility buildings”
 Designer: FOSTER+PARTNERS Buro Happold.
 Owner: KSA Saudi Railways Organization.
 Consultant: Dar Al – Handasah
 Estimated budget: 3.60 Billion SAR.
 Location: Makkah – Saudi Arabia.
Position (1): Technical office engineer.
Main job duties:
 Quantity Survey for structural elements.
 Estimate project’s needs & processing requirements of the Resources Plan (RC &
PC concrete, Rebar steel, formwork, backfill material, bearing pads …..)
 Partially Preparation for subcontractor’s contract. (B.O.Q's- special conditions.)
 Provide QC department by information (stages-construction ways-sketches) to
preparing Method of Statement.
 Preparing logistic and mobilization plan.

4.  Management plan for tower & mobile cranes layout. (Selection of locations for
cranes due to miscellaneous design drawing, critical area loads, erection, climbing
& dismantling, handling, maneuvering, access roads serve project).
 Preparing construction joints plans & details for all project buildings.
 Preparing shop drawing (excavation levels, foundations, pedestals, columns, shear
& retaining walls, cores, corbels, all slabs types & beams, ramps, sump-pits, tanks)
& bar bending schedule (BBS). According to B.S.
 Preparing details drawing for infra-structure works as per specifications.
 Technical support to find solution for site problems.
 Preparation of TQ's (Technical query).
 Managing the approval with the consultant.
 Providing recommended ways to improve the efficiency of project operations.
Position (2): Site Sector Manager.
Main job duties:
Concourse building ( 26000 m
2
area ) all Civil & Structure site works.
 Follow-up rock cutting works, blasting & earthworks.
 follow-up dewatering system ( deep well points- shallow pumps)
 Formwork (Doka, GHI, PERI, SGB scaffolding, Geoplast).
 Reinforcement steel fixing, backfilling, insulation, precast installing, landscape
 Concrete pouring, de-shuttering, curing treatment for white cement concrete.
 Preparing plan for concrete cast by stationery pump with 100 m length pipeline or
crane or movable pump.
 Check for workability of concrete by field tests.
 Ensure of pouring concrete (self-compacted concrete - High Strength Concrete)
according to specifications.
 Executing all civil works, Support for the implementation MEP works such as
storm (grade/forced), grey & foul water pipelines ,sand traps, manholes(ring
precast –cast in situ) , tanks , wet well whose conjunction with civil works.
 Coordinate construction activities with all relevant parties.
 Solving any unexpected technical difficulties and other problems that may arise.
 Ensure that all products are delivered on-time within scope, budget and quality.
 Support/coordinate with department managers to ensure resource availability and
allocation.
 Lead & evaluate manpower more than 200 persons.
 Put system to prevent material losses depend on daily consumption rate.
 Responsible for safety of labors, equipments, tools & machineries to ensure that
end the project with less the number of incidents.

5. From Nov.2009 up to Feb.2011
Project: JABAL OMAR DEVELOPMENT PROJECT (MAKKAH) – High Rise
Building” The project is a mixed-use development that includes residential
apartments, hotels, commercial uses, public parking and associated support facilities
such as public assembly and prayer areas. The project with a land area of 230,000m2
and built-up floor area of approximately 2 million square meters is intended to be a
high-density development (1,500 persons/hectare).”
 Conceptual Designer: Ateliers Lion & Ingerop International.
 Project Manager: PSDC / KLCC Projecks SDN BHD.
 Consultant: DIWI.
 Estimated budget: 11.50 Billion SAR.
 Location: Makkah – Saudi Arabia.
Position: Technical office engineer.
Main job duties:
 Review, comments and agree the Subcontractors Baseline Schedules.
 Develop the project schedule.
 Preparing charts, diagrams, graphs and presentations to illustrate logistics issues.
 Preparing progress reports ( monthly, bi-weekly reports)
 Quantity Survey for structure elements.
 Prepare shop drawing, as built drawing & bar bending schedule due to A.C.I.
 Preparation of R.F.I's (request for information) for any missing data or
contradictions in design drawings.
From June.2007 till Nov.2009:
Experience in the Arab contractors company.
ALEXANDRIA BRANCH
From June.2007 up to Nov.2009
Project: Dekhela port Development (Agriculture , Electrical , Supplies, Sanitary &
drainage works, Sumps , telecommunication networks , Fire & potable water
networks ,Roads ( rigid – flexible ), service building , fences , VIP hall )
 Owner : Alexandria port authority
 Estimated budget: 389 million EGP
 Location: Alexandria – Egypt.
Position (1): Technical office Manager.
Main job duties:
Manage Evaluate, Follow up & solving problems.

6.  Current & Final Invoices with client.
 Participating in Studying Prices Analysis.
 Symmetrizing between client & sub-contractor invoices.
 Ensure control of material losses (Reinforcement steel – cement, sand – stone –
pipes – paints ... etc).
 Preparing Initial Handing over Documents.
 Representative of the main Contractor for handling a client.
 Resolve disputes in relation to client / subcontractor issues.
 Coordinator for layout: shop drawings, as built drawings, proposal designed
drawings Analyzing project requirements and systems operations capacities.
 Preparing analysis reports to track the progress of each phase of construction.
 Pinpointing project possible risks.
Position (2): Technical office engineer:
Main job duties:
 Sub-contractors contacts (Quantity Survey & Measurement, Making a Tender
,Preparing Time Schedule, Current & Final Invoices by excel, Evaluation of Sub
contractor, Submittal specimens)
 Analysis Tender Documents received with the RFP's.
 Comparing subcontractors offers to provide a clear image of whom to base the
price upon.
 Negotiating sub-Contractors and suppliers for items costs and contract conditions.
 Handling bidders Inquiries.
 Preparation of procurement packages and RFQs.
Position (3): Site engineer to work infrastructure / landscape.
Main job duties:
 Rapidly accomplishing road length of 2 km [Sanitary & drainage works, Roads
(rigid – flexible), concrete fences with 500 m length, flowers basins, paving,
afforestation, Irrigation systems]
 Rehabilitation of building’s façade.
 Implement VIP hall.
Experience in Engineering Consulting Corporation
From Jan.2007 up to May.2007
Project: Alex West (The project is a residential and commercial project for
accommodation, built on 600 acres)
 Owner : Barons Court resort
 Consultant: Engineering Consulting Corporation

7.  Location : West of Alexandria – Egypt
Position: Site engineer.
Main job duties:
 Supervision the executing for 20 Villa (concrete works).
 Survey works (Total Station SOKKIA 3030 R)
 Ensure quality and validity of structure site activities.
 Give proper directions to sub-contractor to avoid future conflict.
 Prepare daily report.
Experience in African Consultant Office
From Oct.2006 up to Jan.2007
Project(1): Zomorodt Al Saraya “2 Residential Buildings- land area 2000 m2 –
concrete work “
 Designer/ Consultant: African Consultant Office
 Owner: Alsaraya real estate investments
 Location : Gleem- Alexandria – Egypt
Project(2): Residential Buildings (Concrete and finishing works).
 Designer/ Consultant: African Consultant Office
 Location : Maamora beach- Alexandria – Egypt
Position: supervision site engineer.
Main job duties:
 Supervise the work to ensure quality and validity of structure site activities.
 Obtain proper directions to contractor to avoid future conflict.
 Review take-off sheets and invoices.
 Prepare daily report.
Working at EL SARAYA for Construction (Dr.Zakaria Sheloma )
From June.2006 up to Oct.2006
Project: Hacienda beach (The project is a tourism village located at north coast-
Egypt).
Position: Site Engineer.
Main job duties:
 Implementing Constructions for 4 VIP Villas.
 Execute foundation (Piles CFA).
Reference
Available upon request.