SlideShare uma empresa Scribd logo
1 de 27
CHAPTER 19
Rapid Prototyping Operations
Rapid prototyping
• Introduction
• Subtractive processes
• Additive process
• Virtual Prototyping
• Applications
Rapid prototyping
• Technology which considerably speeds the iterative product
development process
Fig: a) Examples of parts made by rapid prototyping b) Stereolithography model of cellular phone
Advantages
• CAD data files can be manufactured in hours.
• Tool for visualization and concept verification.
• Prototype used in subsequent manufacturing
operations to obtain final part
• Tooling for manufacturing operations can be
produced
Classification of Rapid Prototyping
• Rapid prototyping is classified to 3-major groups
Subtractive ( Removal of material )
Additive ( Adding of material )
Virtual ( Advanced computer base
visualization)
Subtractive Process
• Subtractive process use computer based Prototype technology to
speed the process
• Essential Technologies for subtractive prototyping :
• Computer – based drafting packages ( 3-D representation of parts)
• Interpretation software (Translation of cad file to manufacturing
software)
• Manufacturing Software (Planning Machining operations)
• Computer-Numerical Control Machinery
Additive Process
• Build parts in layer by layer (slice by slice as stacking a loaf of bread)
Fig: The computational steps in
producing a stereolithography
file a) Three dimensional
description of part b)The part
is divides into slices (only one
in 10 is shown) c)support
material is planned d)A set of
tool directions is determined to
manufacture each slice.
Shown is the extruder path at
section A-A from c) For a
fused-deposition-modeling
operation
Require elaborate software
1 : Obtain cad file
2 : Computer then constructs slices of a 3-dimensional
part
3 : slice analyzed and compiled to provide the rapid
prototyping machine
4 : setup of the proper unattended and provide rough
part after few hours
5 : Finishing operations and sanding and painting
6:labor intensive and production time varies from few
minutes to few hours
Additive Process
Fused Deposition Modeling
• A gantry robot controlled extruder
head moves in two principle
directions over a table
• Table can be raised or lowered as
needed
• Thermo plastic or wax filament is
extruded through the small orifice
of heated die
• Initial layer placed on a foam
foundation with a constant rate
• Extruder head follows a
predetermined path from the file
• After first layer the table is
lowered and subsequent layers are
formed
Fig : (a)Fused-deposition-modeling process.
(b)The FDM 5000, a fused-decomposition-
modeling-machine.
Fused Deposition Modeling
Fig: a)A part with protruding section which requires support material b) Common support structures used in
rapid-prototyping machines
Stereolithiography
• Works based on the principle of
curing liquid photomer into specific
shape
• A vat which can be lowered and
raised filled with photocurable liquid
acrylate polymer
• Laser generating U-V beam is
focused in x-y directions
• The beam cures the portion of photo
polymer and produces a solid body
• This process is repeated till the level
b is reached as shown in the figure
• Now the plat form is lowered by
distance ab
• Then another portion of the cylinder
is shaped till the portion is reached
Fig :Stereolithiography Process
Selective laser sintering (SLS) :
Fig: The selective laser sintering process
Selective laser sintering
• SLS based on sintering of nonmetallic powders onto a
selective individual objects
• Basic elements in this process are bottom of processing
chambers equipped with 2 cylinders
• Powder feed cylinder which is raised incrementally to
supply powder to part-build cylinder through a roller
mechanism
• Part-build cylinder which is lowered incrementally to where
the sintered part is formed.
• Set of the proper computer files and the initiation of
the production processes
• Machine operate unattended and provide rough part
after few hours
• Finishing operations as sanding and painting
• Labor intensive & production time varies from few
minutes to few hours
Selective laser sintering
• Layer of powder is first deposited on part build
cylinders
• A laser beam controlled by instruction from 3-
D file is focused on that layer tracing &
sintering a particular cross-section into a solid
mass & dust is taken off.
• Another layer of powder is now deposited this
cycle is repeated again and dust is shaken off
Selective laser sintering
Solid Base curing :
• Also called Solid ground
curing
• Entire slices of part are
manufactured at one time
• So large throughput is
achieved
• Most expensive & time
consuming
• The entire process is shown
Fig:The solid based curing process
• Ballistic particle manufacturing
• Stream of material , such as plastic ,ceramic, metal or
wax ejected through small orifice at a surface
• Mechanism similar to inkjet mechanism ( piezo-electric
pump)
• Operation repeats similar to other process to form a part
with layers of wax deposited on top of each other
• Ink jet heat guided by three-axis robot
Ballistic Particle Manufacturing
3-D Printing process
Similar to ballistic particle manufacturing
Fig:Three dimensional printing process
• Print head deposits an inorganic binder material
• Binder directed onto a layer of ceramic metal powder
• A piston supporting the powder bed is lower incrementally with
each step a layer is deposited and unified by binder
• Commonly used materials – Aluminum oxide, silicon carbide,silica
and zirconium.
• Common part produced by 3-D printing is a ceramic casting shall
• Curing around 150 C – 300 F
• Firing – 1000 C – 1500 C
3-D Printing process
Laminated object manufacturing (LOM )
• Laminated implies laying down of layers which are adhesively
bonded to one another
• Uses layer of paper or plastic sheets with heat activated glue
on one side of the product parts
• Excess material to be removed manually
• Simplified by preparing the laser to burn perforations in cross-
sectional pattern
• LOM uses sheets as thin as 0.05mm
• Compressed paper has appearance and strength of soft wood ,
and often mistaken for elaborate wood carvings.
Laminated Object Material (LOM)
Fig : (a) Laminated object-manufacturing process (b)Crankshaft-part example made by LOM
Virtual prototyping
• Virtual prototyping (modeling and simulation
of all aspects of a prototype, i.e. mechanical
design, kinematics, dynamics, and controls
accompanied by a realistic visualization).
• Realizing the best design in the shortest lead-
time of complex products/processes
• Allows the exotic, unconventional designs be
prototyped, rapidly and cost-effectively
Applications of Rapid Prototyping
• Production of individual parts
• Production of tooling by Rapid Prototyping (Rapid Tooling)
Fig: Manufacturing steps for investment casting that uses rapid prototyped wax parts as blanks.
Rapid Tooling
The term Rapid Tooling (RT) is typically used to describe a process which
either uses a Rapid Prototyping (RP) model as a pattern to create a mold
quickly or uses the Rapid Prototyping process directly to fabricate a tool
for a limited volume of prototypes .
a)Tooling time is much shorter than for a conventional tool. Typically, time to
first articles is below one-fifth that of conventional tooling.
b) Tooling cost is much less than for a conventional tool. Cost can be below
five percent of conventional tooling cost.
c) Tool life is considerably less than for a conventional tool.
d) Tolerances are wider than for a conventional tool.
Rapid Tooling
Fig: Manufacturing steps in sand casting that causes that uses rapid-prototyped patterns
Rapid Tooling
Fig: Manufacturing steps in sand casting that causes that uses rapid-prototyped patterns
THE END

Mais conteúdo relacionado

Mais procurados

TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESSTYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESSNurhuda Hayati
 
4.selective laser sintering (by Hari Prasad)
4.selective laser sintering (by Hari Prasad)4.selective laser sintering (by Hari Prasad)
4.selective laser sintering (by Hari Prasad)Sachin Hariprasad
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototypingAjaa Tahir
 
RAPID PROTOTYPING(RPT)
RAPID PROTOTYPING(RPT)RAPID PROTOTYPING(RPT)
RAPID PROTOTYPING(RPT)Manoj Gowda K
 
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING 3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING S. Sathishkumar
 
Thermal jet printer
Thermal jet printerThermal jet printer
Thermal jet printerManju Sonu
 
Rapid prototyping and modelling
Rapid prototyping and modellingRapid prototyping and modelling
Rapid prototyping and modellingAmar Vamsi Krishna
 
rapit prototyping
rapit prototypingrapit prototyping
rapit prototypingsankar n
 
Rapid prototyping seminar
Rapid prototyping seminarRapid prototyping seminar
Rapid prototyping seminaravwhysoserious
 
Lecture # 02 Rapid Prototyping Techniques
Lecture # 02 Rapid Prototyping TechniquesLecture # 02 Rapid Prototyping Techniques
Lecture # 02 Rapid Prototyping TechniquesSolomon Tekeste
 
Rapid prototyping ppt by Manoj k.
Rapid prototyping ppt by Manoj k.Rapid prototyping ppt by Manoj k.
Rapid prototyping ppt by Manoj k.Manoj kumar Kuna
 
Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)ROLWYN CARDOZA
 
180180708010 - RAPID PROTOTYPING
180180708010 - RAPID PROTOTYPING180180708010 - RAPID PROTOTYPING
180180708010 - RAPID PROTOTYPINGMilan Pithva
 
Direct Metal Laser Sintering(DMLS)
Direct Metal Laser Sintering(DMLS)Direct Metal Laser Sintering(DMLS)
Direct Metal Laser Sintering(DMLS)Pramol Jain M N
 

Mais procurados (20)

TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESSTYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
TYPES OF RAPID PROTOTYPING - ADDITIVE PROCESS
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
 
Rapid tooling (rt)
Rapid tooling (rt)Rapid tooling (rt)
Rapid tooling (rt)
 
4.selective laser sintering (by Hari Prasad)
4.selective laser sintering (by Hari Prasad)4.selective laser sintering (by Hari Prasad)
4.selective laser sintering (by Hari Prasad)
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
 
Rapid prototyping
Rapid prototypingRapid prototyping
Rapid prototyping
 
RAPID PROTOTYPING(RPT)
RAPID PROTOTYPING(RPT)RAPID PROTOTYPING(RPT)
RAPID PROTOTYPING(RPT)
 
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING 3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
3D PRINTING- POWDER BASED ADDITIVE MANUFACTURING
 
Rapid prototyping and tooling
Rapid prototyping and toolingRapid prototyping and tooling
Rapid prototyping and tooling
 
Thermal jet printer
Thermal jet printerThermal jet printer
Thermal jet printer
 
Rapid prototyping and modelling
Rapid prototyping and modellingRapid prototyping and modelling
Rapid prototyping and modelling
 
rapit prototyping
rapit prototypingrapit prototyping
rapit prototyping
 
Rapid prototyping seminar
Rapid prototyping seminarRapid prototyping seminar
Rapid prototyping seminar
 
Rapid Prototyping
Rapid PrototypingRapid Prototyping
Rapid Prototyping
 
Lecture # 02 Rapid Prototyping Techniques
Lecture # 02 Rapid Prototyping TechniquesLecture # 02 Rapid Prototyping Techniques
Lecture # 02 Rapid Prototyping Techniques
 
Rapid Prototyping
Rapid PrototypingRapid Prototyping
Rapid Prototyping
 
Rapid prototyping ppt by Manoj k.
Rapid prototyping ppt by Manoj k.Rapid prototyping ppt by Manoj k.
Rapid prototyping ppt by Manoj k.
 
Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)Rapid prototyping( additive manufacturing)
Rapid prototyping( additive manufacturing)
 
180180708010 - RAPID PROTOTYPING
180180708010 - RAPID PROTOTYPING180180708010 - RAPID PROTOTYPING
180180708010 - RAPID PROTOTYPING
 
Direct Metal Laser Sintering(DMLS)
Direct Metal Laser Sintering(DMLS)Direct Metal Laser Sintering(DMLS)
Direct Metal Laser Sintering(DMLS)
 

Destaque

Chapter 10 class
Chapter 10 classChapter 10 class
Chapter 10 classdx3driver
 
Assessment and the ifsp
Assessment and the ifspAssessment and the ifsp
Assessment and the ifspblantoncd
 
Developing instructional materials
Developing instructional materialsDeveloping instructional materials
Developing instructional materialsMichael8531
 
Overview of Rapid Prototyping
Overview of Rapid PrototypingOverview of Rapid Prototyping
Overview of Rapid PrototypingSuhaimi Alhakimi
 
Chapter 10 Designing and Conducting Formative Evaluations
Chapter 10 Designing and Conducting Formative EvaluationsChapter 10 Designing and Conducting Formative Evaluations
Chapter 10 Designing and Conducting Formative Evaluationscdjhaigler
 
Revising Instructional Materials
Revising Instructional MaterialsRevising Instructional Materials
Revising Instructional MaterialsRaheen26
 
New venture financing
New venture financingNew venture financing
New venture financingZiya-B
 
Laminated object manufacturing
Laminated object manufacturingLaminated object manufacturing
Laminated object manufacturingAnkit Raghuwanshi
 
Chapter 9 developing instructional materials
Chapter 9 developing instructional materialsChapter 9 developing instructional materials
Chapter 9 developing instructional materialsSidney Lanier High School
 
Optimization of wedm process parameters using taguchi method
Optimization of wedm  process parameters using taguchi methodOptimization of wedm  process parameters using taguchi method
Optimization of wedm process parameters using taguchi methodDharam Deo Prasad
 
Introduction to energy management system
Introduction to energy management system Introduction to energy management system
Introduction to energy management system ZAINI ABDUL WAHAB
 
Developing Instructional Materials
Developing Instructional MaterialsDeveloping Instructional Materials
Developing Instructional Materialscdjhaigler
 
RAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdateRAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdateKerrie Noble
 
Developing instructional materials
Developing instructional materialsDeveloping instructional materials
Developing instructional materialsLarry Cobb
 
Case Study of Energy Audit
Case Study of Energy Audit Case Study of Energy Audit
Case Study of Energy Audit Darshan Vithani
 
INSTRUCTIONAL PLANNING
INSTRUCTIONAL PLANNINGINSTRUCTIONAL PLANNING
INSTRUCTIONAL PLANNINGAllaine Santos
 

Destaque (20)

Chapter 10 class
Chapter 10 classChapter 10 class
Chapter 10 class
 
Assessment and the ifsp
Assessment and the ifspAssessment and the ifsp
Assessment and the ifsp
 
Developing instructional materials
Developing instructional materialsDeveloping instructional materials
Developing instructional materials
 
Overview of Rapid Prototyping
Overview of Rapid PrototypingOverview of Rapid Prototyping
Overview of Rapid Prototyping
 
Chapter 10 Designing and Conducting Formative Evaluations
Chapter 10 Designing and Conducting Formative EvaluationsChapter 10 Designing and Conducting Formative Evaluations
Chapter 10 Designing and Conducting Formative Evaluations
 
Revising Instructional Materials
Revising Instructional MaterialsRevising Instructional Materials
Revising Instructional Materials
 
Chapter 9
Chapter 9Chapter 9
Chapter 9
 
New venture financing
New venture financingNew venture financing
New venture financing
 
Laminated object manufacturing
Laminated object manufacturingLaminated object manufacturing
Laminated object manufacturing
 
Chapter 9 developing instructional materials
Chapter 9 developing instructional materialsChapter 9 developing instructional materials
Chapter 9 developing instructional materials
 
Ent300 Module04
Ent300 Module04Ent300 Module04
Ent300 Module04
 
Optimization of wedm process parameters using taguchi method
Optimization of wedm  process parameters using taguchi methodOptimization of wedm  process parameters using taguchi method
Optimization of wedm process parameters using taguchi method
 
Chapter 11 revising instructional materials
Chapter 11 revising instructional materialsChapter 11 revising instructional materials
Chapter 11 revising instructional materials
 
Introduction to energy management system
Introduction to energy management system Introduction to energy management system
Introduction to energy management system
 
Developing Instructional Materials
Developing Instructional MaterialsDeveloping Instructional Materials
Developing Instructional Materials
 
RAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdateRAPID TOOLING - presentationupdate
RAPID TOOLING - presentationupdate
 
Formative evaluation
Formative evaluationFormative evaluation
Formative evaluation
 
Developing instructional materials
Developing instructional materialsDeveloping instructional materials
Developing instructional materials
 
Case Study of Energy Audit
Case Study of Energy Audit Case Study of Energy Audit
Case Study of Energy Audit
 
INSTRUCTIONAL PLANNING
INSTRUCTIONAL PLANNINGINSTRUCTIONAL PLANNING
INSTRUCTIONAL PLANNING
 

Semelhante a RP CHAPTER 19: RAPID PROTOTYPING PROCESSES

Rapidprototyping
RapidprototypingRapidprototyping
Rapidprototypingnavdeep6123
 
Rapid Prototyping_April18_2022.ppt
Rapid Prototyping_April18_2022.pptRapid Prototyping_April18_2022.ppt
Rapid Prototyping_April18_2022.pptKPShrestha
 
Rapid-prototyping ( mechanical )
Rapid-prototyping ( mechanical )Rapid-prototyping ( mechanical )
Rapid-prototyping ( mechanical )Nad Nadira
 
rapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdf
rapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdfrapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdf
rapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdfmuradismail9
 
CNC_RP_12212122121125817Presentation.ppt
CNC_RP_12212122121125817Presentation.pptCNC_RP_12212122121125817Presentation.ppt
CNC_RP_12212122121125817Presentation.pptAshishKumar42163
 
CNC Technology.pptx
CNC Technology.pptxCNC Technology.pptx
CNC Technology.pptxSameerUtekar
 
additivemanufacturingppt-161015184713.pdf
additivemanufacturingppt-161015184713.pdfadditivemanufacturingppt-161015184713.pdf
additivemanufacturingppt-161015184713.pdfSahilS39
 
Build Orientation Analysis in fused deposition modeling
Build Orientation Analysis in fused deposition modelingBuild Orientation Analysis in fused deposition modeling
Build Orientation Analysis in fused deposition modelingkhushalkatore
 
rapid_prototyping classification.ppt
rapid_prototyping classification.pptrapid_prototyping classification.ppt
rapid_prototyping classification.pptdferedrghhr
 
3d printing in prosthodontics K V G
3d printing in prosthodontics  K V G3d printing in prosthodontics  K V G
3d printing in prosthodontics K V GSai Bharath
 
additivemanufacturingppt-161015184713.pptx
additivemanufacturingppt-161015184713.pptxadditivemanufacturingppt-161015184713.pptx
additivemanufacturingppt-161015184713.pptxAdharchandsaha
 

Semelhante a RP CHAPTER 19: RAPID PROTOTYPING PROCESSES (20)

Rapidprototyping
RapidprototypingRapidprototyping
Rapidprototyping
 
Module 1.pptx
Module 1.pptxModule 1.pptx
Module 1.pptx
 
Rapid Prototyping_April18_2022.ppt
Rapid Prototyping_April18_2022.pptRapid Prototyping_April18_2022.ppt
Rapid Prototyping_April18_2022.ppt
 
Rapid-prototyping ( mechanical )
Rapid-prototyping ( mechanical )Rapid-prototyping ( mechanical )
Rapid-prototyping ( mechanical )
 
rapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdf
rapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdfrapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdf
rapidprototyping-130214024311-phpapp01-140307000659-phpapp01.pdf
 
CNC_RP_12212122121125817Presentation.ppt
CNC_RP_12212122121125817Presentation.pptCNC_RP_12212122121125817Presentation.ppt
CNC_RP_12212122121125817Presentation.ppt
 
CNC Technology.pptx
CNC Technology.pptxCNC Technology.pptx
CNC Technology.pptx
 
AMppt2.pptx
AMppt2.pptxAMppt2.pptx
AMppt2.pptx
 
Additive manufacturing ppt
Additive manufacturing pptAdditive manufacturing ppt
Additive manufacturing ppt
 
additivemanufacturingppt-161015184713.pdf
additivemanufacturingppt-161015184713.pdfadditivemanufacturingppt-161015184713.pdf
additivemanufacturingppt-161015184713.pdf
 
Build Orientation Analysis in fused deposition modeling
Build Orientation Analysis in fused deposition modelingBuild Orientation Analysis in fused deposition modeling
Build Orientation Analysis in fused deposition modeling
 
AM
AMAM
AM
 
rapid_prototyping classification.ppt
rapid_prototyping classification.pptrapid_prototyping classification.ppt
rapid_prototyping classification.ppt
 
3D printing by soumya.pptx
3D printing by soumya.pptx3D printing by soumya.pptx
3D printing by soumya.pptx
 
Case studies.pptx
Case studies.pptxCase studies.pptx
Case studies.pptx
 
3d printing in prosthodontics K V G
3d printing in prosthodontics  K V G3d printing in prosthodontics  K V G
3d printing in prosthodontics K V G
 
3D PRINTING
3D PRINTING3D PRINTING
3D PRINTING
 
additivemanufacturingppt-161015184713.pptx
additivemanufacturingppt-161015184713.pptxadditivemanufacturingppt-161015184713.pptx
additivemanufacturingppt-161015184713.pptx
 
RP.ppt
RP.pptRP.ppt
RP.ppt
 
3 d printing
3 d printing3 d printing
3 d printing
 

Último

(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...ranjana rawat
 
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130Suhani Kapoor
 
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Dr.Costas Sachpazis
 
Call Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service Nashik
Call Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service NashikCall Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service Nashik
Call Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service NashikCall Girls in Nagpur High Profile
 
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICSAPPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICSKurinjimalarL3
 
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escortsranjana rawat
 
(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...
(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...
(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...ranjana rawat
 
MANUFACTURING PROCESS-II UNIT-2 LATHE MACHINE
MANUFACTURING PROCESS-II UNIT-2 LATHE MACHINEMANUFACTURING PROCESS-II UNIT-2 LATHE MACHINE
MANUFACTURING PROCESS-II UNIT-2 LATHE MACHINESIVASHANKAR N
 
SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )Tsuyoshi Horigome
 
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur High Profile
 
Microscopic Analysis of Ceramic Materials.pptx
Microscopic Analysis of Ceramic Materials.pptxMicroscopic Analysis of Ceramic Materials.pptx
Microscopic Analysis of Ceramic Materials.pptxpurnimasatapathy1234
 
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130Suhani Kapoor
 
(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service
(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service
(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Serviceranjana rawat
 
Processing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxProcessing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxpranjaldaimarysona
 
Porous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writingPorous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writingrakeshbaidya232001
 
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...Soham Mondal
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxJoão Esperancinha
 
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...ranjana rawat
 
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSMANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSSIVASHANKAR N
 
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur EscortsHigh Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur High Profile
 

Último (20)

(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
(ANJALI) Dange Chowk Call Girls Just Call 7001035870 [ Cash on Delivery ] Pun...
 
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
VIP Call Girls Service Hitech City Hyderabad Call +91-8250192130
 
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
Structural Analysis and Design of Foundations: A Comprehensive Handbook for S...
 
Call Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service Nashik
Call Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service NashikCall Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service Nashik
Call Girls Service Nashik Vaishnavi 7001305949 Independent Escort Service Nashik
 
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICSAPPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
APPLICATIONS-AC/DC DRIVES-OPERATING CHARACTERISTICS
 
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
(MEERA) Dapodi Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Escorts
 
(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...
(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...
(TARA) Talegaon Dabhade Call Girls Just Call 7001035870 [ Cash on Delivery ] ...
 
MANUFACTURING PROCESS-II UNIT-2 LATHE MACHINE
MANUFACTURING PROCESS-II UNIT-2 LATHE MACHINEMANUFACTURING PROCESS-II UNIT-2 LATHE MACHINE
MANUFACTURING PROCESS-II UNIT-2 LATHE MACHINE
 
SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )SPICE PARK APR2024 ( 6,793 SPICE Models )
SPICE PARK APR2024 ( 6,793 SPICE Models )
 
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur EscortsCall Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
Call Girls in Nagpur Suman Call 7001035870 Meet With Nagpur Escorts
 
Microscopic Analysis of Ceramic Materials.pptx
Microscopic Analysis of Ceramic Materials.pptxMicroscopic Analysis of Ceramic Materials.pptx
Microscopic Analysis of Ceramic Materials.pptx
 
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
VIP Call Girls Service Kondapur Hyderabad Call +91-8250192130
 
(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service
(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service
(RIA) Call Girls Bhosari ( 7001035870 ) HI-Fi Pune Escorts Service
 
Processing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptxProcessing & Properties of Floor and Wall Tiles.pptx
Processing & Properties of Floor and Wall Tiles.pptx
 
Porous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writingPorous Ceramics seminar and technical writing
Porous Ceramics seminar and technical writing
 
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
OSVC_Meta-Data based Simulation Automation to overcome Verification Challenge...
 
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptxDecoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
Decoding Kotlin - Your guide to solving the mysterious in Kotlin.pptx
 
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
(SHREYA) Chakan Call Girls Just Call 7001035870 [ Cash on Delivery ] Pune Esc...
 
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLSMANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
MANUFACTURING PROCESS-II UNIT-5 NC MACHINE TOOLS
 
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur EscortsHigh Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
High Profile Call Girls Nagpur Meera Call 7001035870 Meet With Nagpur Escorts
 

RP CHAPTER 19: RAPID PROTOTYPING PROCESSES

  • 2. Rapid prototyping • Introduction • Subtractive processes • Additive process • Virtual Prototyping • Applications
  • 3. Rapid prototyping • Technology which considerably speeds the iterative product development process Fig: a) Examples of parts made by rapid prototyping b) Stereolithography model of cellular phone
  • 4. Advantages • CAD data files can be manufactured in hours. • Tool for visualization and concept verification. • Prototype used in subsequent manufacturing operations to obtain final part • Tooling for manufacturing operations can be produced
  • 5. Classification of Rapid Prototyping • Rapid prototyping is classified to 3-major groups Subtractive ( Removal of material ) Additive ( Adding of material ) Virtual ( Advanced computer base visualization)
  • 6. Subtractive Process • Subtractive process use computer based Prototype technology to speed the process • Essential Technologies for subtractive prototyping : • Computer – based drafting packages ( 3-D representation of parts) • Interpretation software (Translation of cad file to manufacturing software) • Manufacturing Software (Planning Machining operations) • Computer-Numerical Control Machinery
  • 7. Additive Process • Build parts in layer by layer (slice by slice as stacking a loaf of bread) Fig: The computational steps in producing a stereolithography file a) Three dimensional description of part b)The part is divides into slices (only one in 10 is shown) c)support material is planned d)A set of tool directions is determined to manufacture each slice. Shown is the extruder path at section A-A from c) For a fused-deposition-modeling operation
  • 8. Require elaborate software 1 : Obtain cad file 2 : Computer then constructs slices of a 3-dimensional part 3 : slice analyzed and compiled to provide the rapid prototyping machine 4 : setup of the proper unattended and provide rough part after few hours 5 : Finishing operations and sanding and painting 6:labor intensive and production time varies from few minutes to few hours Additive Process
  • 9. Fused Deposition Modeling • A gantry robot controlled extruder head moves in two principle directions over a table • Table can be raised or lowered as needed • Thermo plastic or wax filament is extruded through the small orifice of heated die • Initial layer placed on a foam foundation with a constant rate • Extruder head follows a predetermined path from the file • After first layer the table is lowered and subsequent layers are formed Fig : (a)Fused-deposition-modeling process. (b)The FDM 5000, a fused-decomposition- modeling-machine.
  • 10. Fused Deposition Modeling Fig: a)A part with protruding section which requires support material b) Common support structures used in rapid-prototyping machines
  • 11. Stereolithiography • Works based on the principle of curing liquid photomer into specific shape • A vat which can be lowered and raised filled with photocurable liquid acrylate polymer • Laser generating U-V beam is focused in x-y directions • The beam cures the portion of photo polymer and produces a solid body • This process is repeated till the level b is reached as shown in the figure • Now the plat form is lowered by distance ab • Then another portion of the cylinder is shaped till the portion is reached Fig :Stereolithiography Process
  • 12. Selective laser sintering (SLS) : Fig: The selective laser sintering process
  • 13. Selective laser sintering • SLS based on sintering of nonmetallic powders onto a selective individual objects • Basic elements in this process are bottom of processing chambers equipped with 2 cylinders • Powder feed cylinder which is raised incrementally to supply powder to part-build cylinder through a roller mechanism • Part-build cylinder which is lowered incrementally to where the sintered part is formed.
  • 14. • Set of the proper computer files and the initiation of the production processes • Machine operate unattended and provide rough part after few hours • Finishing operations as sanding and painting • Labor intensive & production time varies from few minutes to few hours Selective laser sintering
  • 15. • Layer of powder is first deposited on part build cylinders • A laser beam controlled by instruction from 3- D file is focused on that layer tracing & sintering a particular cross-section into a solid mass & dust is taken off. • Another layer of powder is now deposited this cycle is repeated again and dust is shaken off Selective laser sintering
  • 16. Solid Base curing : • Also called Solid ground curing • Entire slices of part are manufactured at one time • So large throughput is achieved • Most expensive & time consuming • The entire process is shown Fig:The solid based curing process
  • 17. • Ballistic particle manufacturing • Stream of material , such as plastic ,ceramic, metal or wax ejected through small orifice at a surface • Mechanism similar to inkjet mechanism ( piezo-electric pump) • Operation repeats similar to other process to form a part with layers of wax deposited on top of each other • Ink jet heat guided by three-axis robot Ballistic Particle Manufacturing
  • 18. 3-D Printing process Similar to ballistic particle manufacturing Fig:Three dimensional printing process
  • 19. • Print head deposits an inorganic binder material • Binder directed onto a layer of ceramic metal powder • A piston supporting the powder bed is lower incrementally with each step a layer is deposited and unified by binder • Commonly used materials – Aluminum oxide, silicon carbide,silica and zirconium. • Common part produced by 3-D printing is a ceramic casting shall • Curing around 150 C – 300 F • Firing – 1000 C – 1500 C 3-D Printing process
  • 20. Laminated object manufacturing (LOM ) • Laminated implies laying down of layers which are adhesively bonded to one another • Uses layer of paper or plastic sheets with heat activated glue on one side of the product parts • Excess material to be removed manually • Simplified by preparing the laser to burn perforations in cross- sectional pattern • LOM uses sheets as thin as 0.05mm • Compressed paper has appearance and strength of soft wood , and often mistaken for elaborate wood carvings.
  • 21. Laminated Object Material (LOM) Fig : (a) Laminated object-manufacturing process (b)Crankshaft-part example made by LOM
  • 22. Virtual prototyping • Virtual prototyping (modeling and simulation of all aspects of a prototype, i.e. mechanical design, kinematics, dynamics, and controls accompanied by a realistic visualization). • Realizing the best design in the shortest lead- time of complex products/processes • Allows the exotic, unconventional designs be prototyped, rapidly and cost-effectively
  • 23. Applications of Rapid Prototyping • Production of individual parts • Production of tooling by Rapid Prototyping (Rapid Tooling) Fig: Manufacturing steps for investment casting that uses rapid prototyped wax parts as blanks.
  • 24. Rapid Tooling The term Rapid Tooling (RT) is typically used to describe a process which either uses a Rapid Prototyping (RP) model as a pattern to create a mold quickly or uses the Rapid Prototyping process directly to fabricate a tool for a limited volume of prototypes . a)Tooling time is much shorter than for a conventional tool. Typically, time to first articles is below one-fifth that of conventional tooling. b) Tooling cost is much less than for a conventional tool. Cost can be below five percent of conventional tooling cost. c) Tool life is considerably less than for a conventional tool. d) Tolerances are wider than for a conventional tool.
  • 25. Rapid Tooling Fig: Manufacturing steps in sand casting that causes that uses rapid-prototyped patterns
  • 26. Rapid Tooling Fig: Manufacturing steps in sand casting that causes that uses rapid-prototyped patterns