Ensure the security of your HCL environment by applying the Zero Trust princi...
equipment
1. 1. Take the camera and gently put the battery into the
slot shown above
2. Push in the battery
3. Make sure the battery is secure and in place.
2. 1. Then gently place the tape into the case
2. The case should then automatically accept the tape and
go down (Do not push the tape with force for the case to
close)
3. Lastly shut the case so that the tape is inside the camera.
3. 1. Place the tripod on the floor
2. Using two hands slide the legs out
3. Personal choice: if you want the tripod to be taller , take out the leg stands further
4. 1. Click the button to release the dolly
, so it is easier to open it.
2. Open the dolly bit by bit.
3. Place the dolly on the floor
5. 1.Place the microphone cable into the plug without any force (make sure it clicks_
2.Attach the microphone to the boom
3. Plug the microphone into the camera