ABB_REVISTA

1. 1MRS752805-MZA
February 7, 2006
Page 1 (7)
Relay Product Engineering Tools, CAP 505
Release Note
Handled by: Leif Williamsson
CAP 505 2.4.0
Release Note
Distribution Automation
Power technology
products
Business identity code:
0763403-0
Domicle: Helsinki
Visiting Address
Strömberg Park,
Muottitie 2A
FI-65100 Vaasa
FINLAND
Postal Address
P.O. Box 699
FI-65100 Vaasa
FINLAND
Telephone
+358 10 2211
Telefax
+358 10 22 41599
+358 10 22 41094 Sales
Internet
www.abb.com/
substationautomation
e-mail:
firstname.lastname@fi.abb.com
Introduction
Delivery
This document describes the new features of the CAP 505 Relay Product Engineering Tools version
2.4.0 and the corrections made.
The CAP 505 2.4.0 release delivery includes the following major improvements:
• Support for REX 521 protection relay, revision G
• Support for the REU 610 voltage protection relay
• Improvements and corrections according to customer feedback
• Documentation updates:
- LIB, CAP and SMS, Tools for Relays and Terminals, User's Guide
- CAP 505 Installation and Commissioning Manual
- CAP 505 User's Guide
Supported operating systems:
• Microsoft Windows NT 4.0 Workstation
• Microsoft Windows 2000
• Microsoft Windows XP Professional
CAP 505 2.4.0 supports the following protection and control terminals:
• SPACOM product family including SACO annunciators
• Multi-purpose protection relay series REJ/REU 5xx
• Basic range protection relays REM/REF/REU 610
• Medium voltage protection and control terminals REF 541/543/545, REM 543/545 and
RET 541/543/545 as well as protection and control relays REC 523 and REX 521
Software Requirements
Supported Devices

2. 1MRS752805-MZA
February 7, 2006
Page 2 (7)
Relay Product Engineering Tools, CAP 505
Release Note
CD Contents PrPrPrPrProgram filesogram filesogram filesogram filesogram files
The CAP 505 Program CD contains the following files:
emaneliF emaneliF emaneliF emaneliF emaneliF noitpircseD noitpircseD noitpircseD noitpircseD noitpircseD
EXE.505PAC 505PACrofnoitacilppanoitallatsnI
TXT.EMDAER
noitallatsni505PACehtgnitratsrofsnoitcurtsnI
noitacilppa
The installation application file CAP505.EXE is located in the root directory
of the Program CD.
Additional softwarAdditional softwarAdditional softwarAdditional softwarAdditional softwareeeee
The CAP 505 Program CD contains also the installation applications for
the following 3rd party software in the subdirectory 'SETUP':
– Adobe Reader 6.02
– LonWorks® PCLTA-10/PCLTA-20/PCC-10 ver. 1.05 for
Windows NT
– LonWorks® PCLTA-10/PCLTA-20/PCC-10 ver. 2.01B for
Windows 2000
– LonWorks® PCLTA-10/PCLTA-2X/PCC-10 ver. 2.02 for
Windows 2000 & XP
The installation of these programs/drivers is optional. For more informa-
tion, see the CAP 505 Installation and Commissioning Manual.
Introduction
Delivery
System Requirements
Supported Devices
CD Contents
Ordering CAP 505
CAP 505 accessories
Document addendum
Requirements
Installation
Changes from previous
versions

3. 1MRS752805-MZA
February 7, 2006
Page 3 (7)
Relay Product Engineering Tools, CAP 505
Release Note
DocumentationDocumentationDocumentationDocumentationDocumentation
The product documentation comprises the following documents:
tnemucoD tnemucoD tnemucoD tnemucoD tnemucoD edoctnemucoD edoctnemucoD edoctnemucoD edoctnemucoD edoctnemucoD emaneliF emaneliF emaneliF emaneliF emaneliF
esaeleR505PAC
)tnemucodsiht(etoN
AZM-508257SRM1 FDP.NENR0.4.2_505PAC
noitallatsnI505PAC
gninoissimmoCdna
launaM
HNEM-109157SRM1 FDP.NECI_505PAC
s'resU505PAC
ediuG
NMUM-292257SRM1 FDP.NEMO_505PAC
dnasyaleRrofslooT
s'resU,slanimreT
ediuG
PMUM-800257SRM1 FDP.NEMU_TRT
noitarugifnoCyaleR
lairotuT,looT
DNEM-309157SRM1 FDP.DNETUT_OCLER
,noitarugifnoCyaleR
tratSkciuQ
ecnerefeR
DNEM-509157SRM1 FDP.NERSQ_OCLER
,rotidEcimiMyaleR
ediuGnoitarugifnoC
CNEM-409157SRM1 FDP.CNEMC_IMLER
gnippaMlocotorP
noitarepO,looT
launaM
D772557SRM1 FDP.NEMO_TMP
,looTgnitidElocotorP
ediuGs'resU
AMUM-289157SRM1 FDP.ANEMO_DOP
noitarugifnoCOTPS
noitarugifnoC,looT
ediuG
BNEM-609157SRM1 FDP.BNEMC_OTPS
syawetaGNOL
,noitarugifnoC
ediuGnoitarugifnoC
CNEM-078157SRM1 FDP.NEMC_WGNOL
Except for the Release Note, the above listed document files are stored
under the 'Doc' subdirectory on the Program CD. When you install CAP 505
2.4.0 for the first time, the product documentation will also be installed on
the hard disk. The Release Note can be found in the root directory of the
Program CD. The documentation is only available in electronic format.
Introduction
Delivery
System Requirements
Supported Devices
CD Contents
Ordering CAP 505
CAP 505 accessories
Document addendum
Requirements
Installation
Changes from previous
versions

4. 1MRS752805-MZA
February 7, 2006
Page 4 (7)
Relay Product Engineering Tools, CAP 505
Release Note
For information on ordering CAP 505, refer to the chapter Introduction of
the CAP 505 Installation and Commissioning Manual.
• It is possible to order the main package containing the CAP 505
main release. The orThe orThe orThe orThe ordering number for the main package isdering number for the main package isdering number for the main package isdering number for the main package isdering number for the main package is
1MRS151017.1MRS151017.1MRS151017.1MRS151017.1MRS151017.
• An upgrade package to CAP 505 2.4.0 is also available for users
who already have a previous licensed version of CAP 505 2.3.0
installed on their PC. The orThe orThe orThe orThe ordering number for the upgradedering number for the upgradedering number for the upgradedering number for the upgradedering number for the upgrade
package is 1MRS151028.package is 1MRS151028.package is 1MRS151028.package is 1MRS151028.package is 1MRS151028. The upgrade package can also be
downloaded via the Internet. The site is found at the address
www.abb.com/substationautomation.
The communication cables listed in the chapter Introduction of the CAP
505 Installation and Commissioning Manual are accessories and have to
be ordered separately.
This section contains documentation that cannot be found anywhere else
in the product documentation.
Relay Configuration TRelay Configuration TRelay Configuration TRelay Configuration TRelay Configuration Tool compatibilityool compatibilityool compatibilityool compatibilityool compatibility
It is recommended not to modify the relay configuration saved with a newer
Relay Configuration Tool version with an older tool version (of older CAP 505),
since upwards compatibility of the tools is never guaranteed.
In CAP 505 2.2.0-1 and later versions, for example, the Relay Configura-
tion Tool has been modified to support the new virtual channels of REF 541/
543/545. This may cause some compatibility problems, if a configuration
modified with the new version of the Relay Configuration Tool is used with
an older version of the tool.
MMITEXT object in Relay Mimic EditorMMITEXT object in Relay Mimic EditorMMITEXT object in Relay Mimic EditorMMITEXT object in Relay Mimic EditorMMITEXT object in Relay Mimic Editor
It is no longer possible to add a new MMITEXT object (dynamic point for
texts) to a mimic picture. This object is not currently supported by any
terminal type.
Due to this, chapter 2.8 in the Relay Mimic Editor Configuration Guide is
obsolete, and so are all the other references to the MMITEXT object in that
manual.
Introduction
Delivery
System Requirements
Supported Devices
CD Contents
Ordering CAP 505
CAP 505 accessories
Document addendum
Requirements
Installation
Changes from previous
versions
Document addendum
Ordering CAP 505
CAP 505 accessories

5. 1MRS752805-MZA
February 7, 2006
Page 5 (7)
Relay Product Engineering Tools, CAP 505
Release Note
Changes from previous
version
The CAP 505 2.4.0 requires a valid 2.4.0 license. The upgrade package
requires a valid 2.3.0 license. Other CAP 505 2.4.0 requirements can be
found in the CAP 505 Installation and Commissioning manual. The manual
is located in the 'doc' subfolder on the CD.
Installation notesInstallation notesInstallation notesInstallation notesInstallation notes
The installation procedure for the CAP 505 software is described in the
CAP 505 Installation and Commissioning manual.
Installing CAP 505 2.4.0Installing CAP 505 2.4.0Installing CAP 505 2.4.0Installing CAP 505 2.4.0Installing CAP 505 2.4.0
To install the program package, run the installation program (CAP505.EXE)
for the package and follow the instructions given by the installation pro-
gram.
The CAP 505 can also be installed on top of any previous CAP 505 instal-
lation. When doing so, all projects including the relay configurations are
preserved unchanged.
Compared to the previous CAP 505 2.3.0 Add-On 6 release, the CAP 505
2.4.0 release includes the following improvements and corrections:
Support added for the following terminals and rSupport added for the following terminals and rSupport added for the following terminals and rSupport added for the following terminals and rSupport added for the following terminals and relayselayselayselayselays
- REX 521, revision G
- REU 610, revision A
General CAP 505 changesGeneral CAP 505 changesGeneral CAP 505 changesGeneral CAP 505 changesGeneral CAP 505 changes
- The login dialog of CAP 505 is not shown any more on starting or
closing the program, but instead the program is started directly in
the Project Structure Navigator view. Information provided by the
removed login dialog is now shown on the new About dialog started
from the Help menu of the Project Structure Navigator.
- The title and icon for the CAP 505 main window is improved.
- Tooltips are added to the tools containing toolbars.
- Support for the SPA communication protocol over a TCP/IP net-
work has been added. The use of the SPA TCP/IP requires that
an Ethernet adapter has been connected to the protection de-
vice.
Introduction
Delivery
System Requirements
Supported Devices
CD Contents
Ordering CAP 505
CAP 505 accessories
Document addendum
Requirements
Installation
Changes from previous
versions
Requirements
Installation

6. 1MRS752805-MZA
February 7, 2006
Page 6 (7)
Relay Product Engineering Tools, CAP 505
Release Note
Changes to the PrChanges to the PrChanges to the PrChanges to the PrChanges to the Project Structuroject Structuroject Structuroject Structuroject Structure Navigatore Navigatore Navigatore Navigatore Navigator
- The COM 610 gateway object type has been added.
- Different object types (structurization items, gateways, different
relay types) have their own icon representations in the project view.
- Support for user-definable background colors of the project tree
has been implemented. Separate view colors can be used to dif-
ferentiate between separate projects and/or separate views of
one project.
- A file history list of the previously opened projects has beens added
to the File menu of the Project Structure Navigator. It helps to
quicikly open some recently used local project.
- A toolbar button for the DR-Collector Tool has been added.
- The relay object configuration dialogs are now placed on top of
the Project Structure Navigator window, so they can not be lost
behind all the other dialogs anymore.
Changes to the System Configuration toolChanges to the System Configuration toolChanges to the System Configuration toolChanges to the System Configuration toolChanges to the System Configuration tool
- It is now possible to select the baud rates 38400 and 57600 for a
serial port.
- It is now possible to change the value of the Header Timeout
attribute of the SPA lines. The value defines the maximum waiting
time in milliseconds within which the first byte of a response from
the slave should have been received after the transmission of a
message.
- It is no longer possible to start the installation program for the
LON adapter driver from the System Configuration tool. The driver
installation must be done outside CAP 505.
Changes to the Communication Manager servicesChanges to the Communication Manager servicesChanges to the Communication Manager servicesChanges to the Communication Manager servicesChanges to the Communication Manager services
- The upload time of the disturbance recordings from REJ 5xx, REU
5xx and REx 61x relays has been shortened.
- If a data block was lost due to communication disturbance during
the uploading of a REX 521 disturbance recording by the SPA file
transfer, this previously cancelled the whole uploading process.
Now the uploading is attempetd to be restarted from the breaking
point after a 10 s time-out.
- If the SPA password of the relay is not the default one, the user is
asked to submit the password when e.g. downloading param-
eters. Previously it was not possible to enter a SPA password
containing the number 0 (e.g. 40) into the password dialog.
Introduction
Delivery
System Requirements
Supported Devices
CD Contents
Ordering CAP 505
CAP 505 accessories
Document addendum
Requirements
Installation
Changes from previous
versions

7. 1MRS752805-MZA
February 7, 2006
Page 7 (7)
Relay Product Engineering Tools, CAP 505
Release Note
ImprImprImprImprImprovements to the RED Relay Setting Tovements to the RED Relay Setting Tovements to the RED Relay Setting Tovements to the RED Relay Setting Tovements to the RED Relay Setting Tooloolooloolool
- Support of bit-wise setting of the event masks has now been
extended to the REF 541/543/545 rel. 3.0, RET 541/543/545
rel. 3.0 and REM 543/545 rel. 2.5 terminals.
- The event mask dialog for REX 521 rev. E and later now also
contains the event texts in addition to the event codes.
- If, based on the registered time stamps, some parameter values
have never been uploaded from the relay unit, a warning is shown
before executing the download operation.
- It is now possible to import all event masks at once, and the
importing can also be canceled.
- It is now possible to import only event mask values which differ
from the values of the relay object.
CorrCorrCorrCorrCorrections to the Tections to the Tections to the Tections to the Tections to the Transducer Linearization Transducer Linearization Transducer Linearization Transducer Linearization Transducer Linearization Tooloolooloolool
- Partial import of exported input linearizations is now allowed. All
inputs having input mode parameter set will get values imported,
and inputs not having input mode parameter set will have no val-
ues imported.
- Entering only one line of data with a negative value used to cause
an error.
CorrCorrCorrCorrCorrections to the SPections to the SPections to the SPections to the SPections to the SPACOM modulesACOM modulesACOM modulesACOM modulesACOM modules
Invalid setting of 0V151 parameter for SPOC 110 has been fixed.
Yours Faithfully
Leif Williamsson
Product Manager
ABB Oy, Distribution Automation
Introduction
Delivery
System Requirements
Supported Devices
CD Contents
Ordering CAP 505
CAP 505 accessories
Document addendum
Requirements
Installation
Changes from previous
versions