2. I began creating my digipak by creating the base colour of the panels. I selected white as I believe all other
colours stand out above this. I also selected my photograph that I had produced from a Terry Richardson style
photo combined with a Holgaart effect. I did this at this stage as this also had a white background that
matched all the other panels. I did this by using the select feature, cropping out bits I didn’t need and shaping
it appropriately using CTRL+T with shift to prevent it becoming distorted.
3. In this next stage I added the font to the front cover of my digipak. I used three copies of the same fonts
(done using the duplication feature). However, I varied the colours of these fonts with one to match each
colour used in the shadowing of the image. I did this using the colour select tool. I shaped it
appropriately and placed it in the left hand top corner of the panel, leaving some negative space which
ensured that the image and text stood out and was the main focal point of the panel.
4. After this I added all relevant information to the spine of the digipak, including the catalogue number
inclusive partly of the name of the record label and a combination of numbers. I also included the name of
the artist and the album title, so that if the digipack were to be displayed and shelved, the audience would
be able to see this vital information which is a major factor in an individual purchasing the item.
5. The next step was to include my second image in the inside cover. For this panel I used the same techniques
as in the first such as the select feature and CTRL+T to shape it correctly. I chose a slightly more lighthearted
photograph than the one used on the front cover as I intended to include a thank you message to all of Luna’s
co-workers and fans, therefore it required something friendly and approachable. I chose to use the same
effect-Holgaart- on this as I believe to include a normal image would totally clash with the front cover and
also it helped to create consistency throughout the digipak. I placed this image in the right hand corner, so
6. After this I added the text as intended as mentioned on the previous slide. I
placed this in a central positioning to fit the negative space most effectively. I
made the font relatively small but still easily readable. This also ensured that the
font did not deter attention from the image, the centre of visual interest.
7. The next step was to fill up the two remaining inside panels. Feedback suggested that I did not want too many
images throughout my digipak and therefore I was advised to include the lyrics in these blank spaces. To
begin with, I designed spaces around which the font could fit. I divided the different sections with a series of
lines, mainly corresponding to the colours used in the images in the digipak. This was apart from the four
black lines that I used to make the rectangles clearer, more visible and bolder.
8. After this, I added the lyrics for two of the shorter songs into the central regions of the
digipak. I aligned these to be central and placed them inside the dividing lines. I used
a font that corresponded with that on the back cover and four other panels apart from
9. After this I added the 6 remaining song lyrics into the left and right designated spaces. I aligned these to the
left and placed them within the dividing lines. I used the grid that is available on Photoshop to make sure that
everything was in line. I also made sure the spacing of these were identical with the panel using the grid
function.
10. I then added the barcode and the production company logo to the back cover of
the digpak. I also included here the price of the CD underneath the barcode. I
placed these in the bottom right hand side of the panel to try and place them out
11. Next I added the track listings down the left hand side of the back cover, keeping this information separated from the barcode
and logo in order to ensure it had a clear and structured layout on the panel. I also added the legal information required on the
bottom right hand side of the panel. I used the same font as I did for the lyrics and the thankyou message, however for the
track listings capitalised it in order to make it bolder and stand out more.
12. Finally, I added the coloured CD template. I chose to put this in black as I wanted the font (the title of the
album) to stand out clearly above this and I believed it looked most effective in black. This colour
corresponds with the majority of the font used, as well as the black dividers on the lyric panels and the
logo on the back cover.
