Methods of lawn making, concepts of rock and water garden
1. 1
Methods of lawn making, concepts of rock and
water garden
Lecture No. 4
2. LAWN
• It is the basic feature for home ground development
• In home garden
• improves the appearance of the house,
• enhances the beauty,
• Increase conveniences 2
• Lawn is beautiful green ground cover with perennial grass.
• Also called as a natural green carpet.
• A lawn is the heart of a garden.
3. 3
• Lawn also provide
–Perfect setting for
• flower beds
• A border
• A shrubbery
• A specimen of tree or a shrub
–Besides , the lawn has spiritual value too
• Lawn is source of charm and pride
• reducestension of mind after adays’hardwork
4. 4
IMPORTANCE
• Lawn is one of the most important features of a garden
• “Without a lawn no garden is complete and beautiful as the
beauty of the garden largely depends on the condition of the
lawn.”
• Main point of attraction of the garden.
• Providesaplacefor takingsrest after theday’s hard work.
• Ideal place for holding parties and different Social functions.
5. 5
Characters' of lawn grasses
It should develop quickly.
The grass must have compact growth.
It should withstand regular mowing.
It should tolerate Cold and drought.
The grass should be soft to touch and not patchy,
Should not give bad odour
Should look fresh and remain green throughout the year.
6. SOIL
…
6
• For establishment of a good lawn fertile loamy soil is ideal.
• Soil should be rich in humus content.
• It should have good moisture holding capacity and at the same
time it should have good drainage
• Depth of soil shold be at least 25-30 cm for luxuriant growth
• A slightly acidic soil having pH between 5. 0 to 6.0 is good growth
of grass.
– Low pH- 0.5 kg/m2 of chalk or grounded lime stone
– Alkaline soil- Gypsum- 0.5 kg/m2
7. Drainage…
• Selected site- proper drainage
• Grasses are shallow rooted herbs and no deep drainage is
necessary, but
• No water should stagnate in the root zone
• Clayey soils- Drainage pipes or by putting a layer of bricks and
rubbish 90cm bellow the surface
• Ordinary drainage –carried out with grading and levelling
13
8. • Rough surface leveling by eye estimation- prior to digging
• Shifting and filling of soil done –if necessary
• After rough levelling- thorough preparation of land is necessary-
by digging
• Digging should be done by trenching method- other wise the
gardener fail to dig to the desired depth
• Toensure proper depth- trench of 60cm deep and 45 cm width
dug at one side of the site
…Drainage..
8
9. • During digging- grass roots, stones etc., should be removed
• Special care should be taken to remove the roots of Motha
grass (Cyperus rotundus)
• Digging should be done during – April –May- sterilize the soil,
kill weed seeds, insects and harmful micro organisms
• Soil should be turned up subsequently 2-3 times at weekly
intervals, - each time clods of earth, if any are broken and roots of
weeds are removed
…
D
rainage
9
10. Manuring and Grading
• After digging is over – Soil is manured and graded
• If the soil is already fertile- Don’t apply organicmanure- weed seeds
• Poor soil-FYM, night soil manure, stable manure-
500kg/100 m2
• The manure is worked up to a depth of 15-20cm
• Any freshly dug soil will take long time for settleing
• In heavy rainfall areas- soil get settled due to pouring rain
• In low rainfall areas- flooding is done to notice the depression
and filled with soil and finally leveled using spirit level 16
12. Botanical Name Common name Situation
Cynodon
dactylon
Hariyali /Arugu
/Doob grass
Suitable for open sunny
location; drought resistant
Stenotaphrum
secundatum
St. Augustine grass
or Buffalo grass
Suitable for shady situation;
requires frequent watering
Sporobolus
tremulus
Chain grass (or)
Upparugu
Suitable for saline soils and
open sunny locations
Poa annua Annual blue grass Suitable for acid soils and
suitable for higher elevations
Pennisetum
clandestinum
Kikuyu grass Grow well in acids soils, suitable
for higher elevations.
Zoisia japonica Japan grass Suitable for poor sandy soil;
open sunny situation, slow in
growth
Selection of lawn grass species
13. Botanical Name Common name Situation
Z. matrella Manila grass Suitable for open sunny
situation
Z. tenuifolia Korean grass or
velvet grass or carpet
grass
Suitable for open sunny
situation
Cynodon sp. Bermuda grass (or)
Hyderabad grass
Suitable for open sunny
situation, needs mowing
Cynodon sp. Dwarf Bermuda Suitable for open sunny
situation
Festuca sp. Fescue grass Shade tolerant, survive on
inferior soils
Paspalum
vaginatum
Paspalum grass Suitable for open sunny
situation
Selection of lawn grass species
25. Surface soil and sub – soil should be retain moisture
Adequate drainage must be provided.
The ground should be perfectly levelled and smooth.
Ploughing is required to loosen the soil.
Digging up to 35-45 cm depth is very important.
The soil should be exposed to the sun for 15 to 20 days.
Undesirable material like roots of the weeds, hard stones,
rocks, etc. is removed.
The soil should be flooded with water several times to
encourage the growth of weeds
About 5-7 cm depth of cowdung manure, activated
sludge or any other organic manure along with lime, is
to be added to the soil.
Final weeding and watering should be given after
application of the manure.
Soil preparation
26. 26
PLANTING OF GRASS
• Planting of grass can be done at anytime of
the year.
• But in the tropical country like India it is better to
start the work of planting the grass in the beginning
of rainy season, because grass thus planted will get
quicker growth and better establishment..
27. 27
KOREAN GRASS
This grass is native of Japan and Korea.
It has recently been introduced in India
Korean grass has velvety growth besides having more
tolerance to cold.
This grass is highly suitable for making lawn in small
areas and home gardens.
28. 28
DOOB OR BERMUDA GRASS
It is used very commonly for making lawn due to
its faster growth, hardiness, less water
requirements.
This grass makes excellent turf.
it can be grown on any type of soil.
30. 1. SEED SOWING
Before sowing of seeds divide the entire plot.
It should be 200 -300sq meter.
500 g of seed will be required for 200 sq metre area.
The entire amount of seeds should be mixed with double the
quantity of fine soil.
Then the soil should be raked over in two directions so as to
mix the seeds uniformly with the soil.
Then the ground should be rolled..
Then watering must be done. 78
31. 31
The seeds will germinate within 3-5 weeks.
After few weeks when the grass attains the height of
about 4-5 cm the first cutting should be done and
then the surface is rolled.
The grass on the lawn should never be allowed to
grow more than 5 cm.
1. SEED SOWING
33. 33
2. DIBBLING
• It is cheapest and slowest method of lawn
making but it is the most common method.
• A small bunch of grass along with roots and
little stem is taken.
• Planting is done at a spacing of 7-9 cm apart both row to
row and plant to plant, preferably when the soil is slightly
moist.
• The roots spread and grow underground in the course of 3-4
months making a fairly compact lawn.
34. 34
3. TURFING
• It is also called sod method quickest method of forming a lawn.
• Small pieces of well prepared lawn or turf are cut into square
or rectangular shape preferably.
• Turf is a piece of earth with compact grass on it.
• Selected small piece of grass should be cut uniformly thick selected
from a place free from weeds and grasses along with soil are
placed on prepared ground side by side closely
• Slightly beat down flat into position.
• Any cavity or interspaces found should be filled with fine soil.
• It is the most costly way of making a lawn.
37. 37
4. BRICKING
• It is done to replace few unhealthy patches in a well
maintained lawn.
• In this methods pieces of lawn along with soil in the shape
of bricks are planted and watered immediately.
38. 38
• Grass roots with little stem of 4-5 cm long pieces are
mixed with garden soil, fresh cow dung water and roots i
e., rhizomes or stolons of doob grass.
• Spread this paste evenly over prepared field during
raining season.
• It is then covered by 2 cm soil and watered regularly.
5. Turf Plastering method
39. 39
6. PLANTING ON POLYTHENE SHEET
• In this method lawn is grown on thick
polyethylene (800 gauge thickness)
• First cut the polyethylene into suitable pieces of desired
dimension.
• Spread a mixture of soil (3-4 cm thick) over the
polyethylene sheets & grow grass on it.
• It can be rolled and taken when temporary effect is to
be created.
41. Introduction:
• Rock garden - Chief landscape
elements
• Mimics the mountains
• Easiest to build up & maintain.
Alpine / Rock plants:
• Grow high up in mountains & comes up well in extreme
conditions even freezing point.
• Normally drought tolerant cacti & succulents also
grown under tropical & sub tropical conditions.
42. Alphine garden
• These plants are found on
mountain tops and tend to be
dwarfed with showy blooms.
• They grow on a medium consisting
of sand, organic matter and gravel.
• These plants are used to cool
climates.
• They include ferns, as well as many
kinds of begonias, peperomias, and
other plants
43.
44. Rock Garden
• A rock garden, also known as a rockery or an alpine garden, is a
type of garden that features extensive use of rocks or stones, along
with plants native to rocky or alpine environments.
• The usual form of a rock garden is a pile of rocks, large and small,
esthetically arranged, and with small gaps between, where the plants
will be rooted.
• Some rock gardens incorporate bonsai
45. Soil for rock garden
• It is always better to select plants that
grow in the soil available instead of
changing the soil to suit the plant.
• As such, rock garden plants do not
require heavy soil.
• Chips of crushed rock, coarse sand,
perlite or crushed limestone or chrushed
oyster shells can be used to improve the
soil texture in rock gardens.
• Leaf mold, peat moss, compost and
organic material can also be used.
• Use soil that has been fertilized and light
in texture.
• This soil will facilitate water drainage.
46. Conditions to be considered
• Lay out must be simple
• Rocks native to the area will look natural
• Large rocks with irregular shapes breaks monotony
• The rock is soft and porous, allowing moisture to seep through,
and some determined roots will be able to make their way
through the rock.
• Limestone perform better & solid rocks not suitable
• Limestone usually has depressions in it that can be filled with
dirt for planting mosses and lichens.
Plants:
• Wide species is available ( perennials, bulbous, cacti, succulents,
etc.,)
• Plant should tolerate harsh conditions
• Selection according to climate is must
47. Key for the success
• Requires full sun for most of the
day
• Requires shade for at least 3
hours during the hottest part of
the day
• Little or no direct sunlight
• Some or all parts of this plant
may be toxic
• Once established, these plants
require little or no supplemental
watering
• These plants will tolerate some
drought, but benefit from
periodic watering
• Needs regular weekly watering,
more often in extreme heat
• Keep constantly moist
52. Rock Garden Care
• Occasional addition of manure or compost will give them
a boost.
• Cutting back any leggy plants after flowering, clipping off
dead stems and foliage, and dividing any plants that
become root-bound or too large for its space.
• Check for insects and diseases regularly.
• Slugs may be present because they enjoy the shelter found
among the rocks.
• Periodical weeding is must
61. INTRODUCTION
• Planned planting of aquatic and semi-aquatic plants in and
around pool is known as water gardening”.
• Water gardens or garden pools have become a popular part of
landscape architecture .
• The aesthetic value of water gardens is enhanced by the almost
endless variety of design and planting options that make each
one a unique and personal creation.
62.
63.
64. STEPS TO BE CONSIDERED
• Try laying out possible water garden designs using a garden hose
or rope
• Plan where pipes , filters and water pumps etc will be located and
how they will be concealed
• Plan where electrical and water lines should be placed for night
lighting, pumps, Fountains or water-falls and set foundations for
those structures as stepping stones, walking bridge, or the base of
a fountain
• Plan how the water will be drained
• Construct a catch basin in the deepest part of the water garden
will concentrate fish during drainings and make it easy to
capture them.
65. • To protect a liner from being punctured by roots and rocks, firmly
compact the dirt along the pool sides and bottom and covered it
with sand or old carpet before installing the liner.
• The water gardens interior may be decorated with sand , gravel or
rocks.
• Much of the enjoyment of owning a water garden is in designing
and landscaping the pool and the surrounding area
• Consider using rocks of various colors and shapes , fountains,
water falls , under water lighting , islands, bridges and
surrounding flower gardens.
STEPS TO BE CONSIDERED
66. Selecting a Site
• The location of the water garden is critical to its ecology
and maintenance.
• A water garden should be situated to receive at least 6
hours of sunlight each day.
• Away from tall shrubs and trees.
• Locating the water garden so that it can be viewed from
the house will increase your enjoyment and allow you to
supervise it.
• Easy access to water and electricity.
67. Pond Styles
It may be
(a) Natural (b) Artificial or Informal (c) Formal.
Installing pond
• While building a pond plant shelves should be included.
• Most water plants stay in pots placed on a pond shelf.
• Ponds need to be at least 600cm deep to allow for the water to
stay cool and deep enough for water plants and fish.
68.
69. Pond Liner
• Ponds can be constructed with concrete base or liners.
• Concrete ponds- For a formal fountain with an intricate shape
the best choice may be concrete.
• Ponds with Liners - The average person who decides to build a
pond will use either a plastic or rubber flexible liner or a
preformed hard plastic liner.
71. Flexible liner installation
• Outline with hose
• Excavate-9-12” deep and wide
• Level top ledges
• Install protective liner
• Secure with edging –
• Rock, stone or paver to the
• waters edge add a great
finish.
72.
73. Installation of pumps
• A pump allows you to move water from one place to another,
such as from the pond to a waterfall or through a fountain.
• This action aerates the water and improves the water quality.
• A pump is also necessary to operate a filter that will further clean
the pond.
Submersible pumps
External pumps
74. Filters
• Mechanical filters that physically remove particles from the
water.
• A biological filter may take many forms but basically it is a
container that holds a filter media into which water flows.
• From here, water is pumped into and then back into the pond.
• Several types of bacteria
then live on this media and
do the work of cleaning the
pond water by converting
one chemical into another.
• This makes the water safe
for fish and helps reduce the
amount of algae.
75. Skimmers
• Pond skimmers are used to keep ponds cleaner and clear of debris.
• Skimmers are a type of mechanical filter, which means that some
sort of net, basket or screen is used to capture debris as the water
passes through.
76. WATER QUALITY
• The first consideration is a supply of good quality water to fill the
pond
• Surface water from the creek or pond is not recommended as it
may contain contaminants, diseases and wild fish harms the water
garden ecosystem
• City water must be de-chlorinated before adding fish and ponds
• Water quality factors to consider are dissolved oxygen, ammonia,
nitrate, pH alkalinity, hardness, carbon-dioxide, and
contaminants or pollutants
77. Building the Waterfall
• The lush, calming noise of water hitting rocks begins to drown out the
sound of noisy cars, transporting you away into a more serene setting.
78. Building Fountains
• A fountain is composed of three things:
• water, which flows up a pipe and trickles back down in a
continuous cycle; a pump, which propels the water; and a piece of
sculpture, over which the water flows.
• The sculpture can be built from any material that will withstand
constant water.
79.
80. Aquatic flora
• Water garden plants are divided into Three main categories: submerged,
marginal, and floating.
• Submerged plants are those that live almost completely under the water,
sometimes with leaves or flowers that grow to the surface such as with the water
lily.
• These plants are placed in a pond or container usually 1–2 ft (0.30–0.61 m)
below the water surface.
• Some of these plants are called oxygenators because they create oxygen for the
fish that live in a pond. Examples of submerged plants are:
– Water lily (Hardy and Tropical)
– Hornwort (Ceratophyllum demersum)
81. • Marginal plants are those that live with their roots under the water but the restof
the plant above the surface.
• These are usually placed so that the top of the pot is at or barely below thewater
level. Examples of these are:
– Iris or Flag (Iris spp.)
– Water-crowfoot (Ranunculus fluitans)
– Bulrush (Scirpus lacustris)
– Cattail (Typha latifolia)
– Taro (Colocasia esculenta)
– Arrowhead (Sagittaria latifolia)
– Lotus (Nelumbo spp.)
– Pickerelweed (Pontederia cordata)
82. • Floating plants are those that are not anchored to the soil at all, but arefree-floating
on the surface.
• In water gardening, these are often used as a provider of shade to reducealgae
growth in a pond.
• These are often extremely fast growing/multiplying. Examples of these are:
– Mosquito ferns (Azolla spp.)
– Water-spangle (Salvinia spp.)
– Water-clover (Marsilea vestita)
– Water Lettuce (Pistia stratiotes)
– Water Hyacinth (Eichhornia crassipes)
• Some areas of the United States do not allow certain of these plants to be sold or
kept, as they have become invasive species in warmer areas of the country, such
as Florida and California.
84. B) Oxygenators
• The submerged oxygenating plants are vital in any pool, as
they maintain hygiene and balance.
• Elodea canadensis
• Vallisneria spiralis
85. C) Floating plants
• The speciality of the plants in this group is that no anchorage in
soil is needed for survival
• Eichhornia crassipes
• Lemna gibba
86. ADDITION OF FISH AND SNAILS
• First, do not open the bags immediately upon receiving the fish.
• Simply put the bags in the pond or quarantine tank and let
them float for at least 30 minutes so that the temperature of
the water in the bag can slowly adjust to that of the pond
water.
• Make sure that the water is dechlorinated and check the
water’s pH, ammonia and nitrite levels
• A good rule of thumb is to use 1-2 inches of fish for every
square foot of water surface
• Snails help to dispose of algae, fish waste and other decaying
matter.
87.
88. Care and maintenance
• Aquatic plants need very little care.
• However some species grow very vigorously and need
trimming to avoid over-crowding and smothering of weaker
species.
• Sometimes the water of the ponds becomes green, popularly
known as ‘Blanket of weed’ covers the surface and side walls of
the pool.
• This is overcome by adding 1kg potassium permanganate (or)
120g copper sulphate to every 24,000 litres of water.
89. Longstock Park, Hampshire
• Park of the Leckford Estate, Longstock Park’s extensive water garden
was created in the 1940s, comprising seven acres of garden, with
over 40 different types of water lily throughout the two acres of
lakes
90. • Longstock Park, Hampshire
• Park of the Leckford Estate, Longstock Park’s extensive water garden
was created in the 1940s, comprising seven acres of garden, with
over 40 different types of water lily throughout the two acres of
lakes