1. Diamond wire saw machine(Diesel)
Wire saw used demolition
Noise-free, vibration-free, dust-free, high-speed section, no relation to thickness
Use of the device
It’s a section device for marbles at stony mountain or concrete
or a reinforcing bar structure and mostly used for structure renovation or dismantling work.
It can be used without any interruption to other structures or traffic transit when dismantling a damaged
structure for bridge removal and renovation of dams as well as removal work of subways, paper mills,
hospitals, and schools.
Features
F t
□ Available for free running into rubber crawler type
□ Greater power efficacy (available ton choose between 143hp
diesel engine and 75kw electric motor)
□ Basic installation of wireless remote control
□ Apply a boom with less feed load - rack gear
□ Built-in programmable logic controller for feed control – lengthening of the wire duration
□ Out-trigger installed for fixing in time of work
□ Idle pulley not required in time of simple section work
□ Maximum towing length – for stony mountains :64㎡(8mx8m)
□ Reduction of hours for preparatory work
□ Minimum wear & tear or wires
Applications
□ Section work for steel concrete reinforcing rod, high rigidity large-sized concrete structure
□ Section of various marbles at large-scaled stony mountains
□ Renovation work of the interior sensitive to noise and vibration
□ Section work of the dismantled materials within a concentrated area full of buildings without any
damage to its surrounding structures
Foretec Co., Ltd.
1391-29, Sinnam-dong, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel +82 31 355 4241 Fax +82 31 355 4310
E-mail : kang@dxkorea.com website : www.dxkorea.com www.foretec.co.kr

2. Wire Saw
It’s a cutting edge dismantling device affording to cut a target subject without any vibration and noise
by hanging up & winding a wire attached by a lot of diamond tips to a wire saw and steel wire on to a
target subject to be dismantled.
And let the main pulley be rotated by a running gear using an electric motor or power source of engine.
▣Technical Data ▣
MODEL NO. FT-DX100 FT-DX150
Diesel Engine
Motor manufacture Hyundai Motors Hyundai Motors
Max Output 100ps / 2000rpm 138ps / 2200rpm
Hydraulic
Hydraulic Pump 91cc 96cc
Max. Operating Pressure 300bar 350bar
Traveling wheel Rubber crawler Rubber crawler
Cutting Equipment
Pulley Speed Adjustable at 0~650rpm Adjustable at 0~650rpm
Feeding Speed Adjustable at 0~35m/h Adjustable at 0~35m/h
Main Pulley Diameter 850mm*1ea 850mm*1ea
Idle Wheel Diameter 250mm*8ea 250mm*10ea
Boom Feeding Length 3500mm 3500mm
Wire Storage 27.5m 27.5m
Dimensions
Weight Approx. 2600kg Approx. 3150kg
Product at Standby(mm) 2482*1720*1890(L*W*H)
Size at Working(mm) 3982*1720*1890(L*W*H)
※ The contents specified in the item description are up to the standard product and according to the
demand of a user, this machine can be designed and made for using to meet a specific purpose.
Foretec Co., Ltd.
1391-29, Sinnam-dong, Hwaseong-si, Gyeonggi-do, Republic of Korea Tel +82 31 355 4241 Fax +82 31 355 4310
E-mail : kang@dxkorea.com website : www.dxkorea.com www.foretec.co.kr