SRv6 Mobile User Plane : Initial POC and Implementation

SRv6 Mobile User Plane
Initial POC and Implementation
ENOG55 @新潟燕三条｜ 2019年2月22日
海老澤健太郎 Kentaro Ebisawa
Toyota InfoTechnology Center Co., Ltd.
SRv6データプレーン実装とモバイルへの適用
SRv6 Mobile User Plane ~ Initial POC and Implementation | ENOG55 in Nigata Tsubame Sanjyo | 2019/02/22
Happy cat’s day ☺

• Deployment options of “SRv6 Mobile User Plane”
• draft-ietf-dmm-srv6-mobile-uplane
• https://datatracker.ietf.org/doc/draft-ietf-dmm-srv6-mobile-uplane/
• Proof Of Concept ... Topology and Results
• Partial migration of GTP to SRv6 without Control Plane change
• POC Findings
• POC SRv6 Implementations
• VPP / FD.io (customized by Pablo@Cisco)
• Barefoot SRv6 P4-16 on Tofino Switch (customized by Apresia Systems)
• POC Future plans
Table of Contents

• POC in this document was conducted during Nov ~ Dec 2018 by the “SRv6 Consortium” ... https://seg6.net/
POC Participants and roles
• Satoru Matsushima (Softbank)
• Overall organization. Packet bare metal cloud setup including Cisco vRouter config.
• Hitoshi Kuwata (Apresia Systems)
• P4 SRv6 custom development. Wedge 100BF (Tofino Switch).
• Kentaro Ebisawa (Toyota ITC) (Editor of this document)
• Overall deployment and testing of VPP, P4 SRv6 and GTPing.
Contributors outside of the SRv6 Consortium
• Physical Lab environment (Rack/Server/Switch) was provided by Yuji Sekiya Lab @ The University of Tokyo
• https://www.sekiya-lab.info/
• Physical Lab and Server & Switch setup was by Ryo Nakamura (upa)
• VPP used in this POC is a privately customized version developed by Pablo@Cisco
• P4 SRv6 source code (without Mobile functions) was provided from Milad@Barefoot
About the POC and this document

https://seg6.net/

Deployment options of
“SRv6 Mobile User Plane”
draft-ietf-dmm-srv6-mobile-uplane-03
https://datatracker.ietf.org/doc/draft-ietf-dmm-srv6-mobile-uplane/

Deployment options of “SRv6 Mobile User Plane”
4G / 5G Core Network (focused in Uplane)
U
E
eNB PGW
Internet
GTPv1-U over IPv4
User Data
User Data
Wireless SGi
S1-U
gNB
SGW
UPF
User Data
U
E
GTPv1-U over IPv4
User Data
N3
UPF
N9 N6Wireless
4G (LTE)
5G
“SRv6 Mobile User Plane” is
an alternative User Plane option to GTPv1-U

5.1. Traditional mode
https://datatracker.ietf.org/doc/draft-ietf-dmm-srv6-mobile-uplane/
In existing 3GPP mobile networks, an UE session is mapped 1-for-1
with a specific GTP tunnel (TEID). This 1-for-1 mapping is
replicated here to replace GTP encapsulation with the SRv6
encapsulation, while not changing anything else.
Uplink Packet Flow Downlink Packet Flow

5.2. Enhanced Mode
... use of multiple SIDs, instead of a single SID as
done in the Traditional mode.
The main difference is that the SR policy MAY include
SIDs for traffic engineering and service programming
in addition to the UPFs SIDs.
Uplink Packet Flow Downlink Packet Flow

5.3. Enhanced mode with unchanged gNB GTP behavior
This section describes two mechanisms for interworking with legacy
gNBs that still use GTP: one for IPv4, the other for IPv6.
In the interworking scenarios as illustrated in Figure 4, gNB does
not support SRv6. gNB supports GTP encapsulation over IPv4 or IPv6.
To achieve interworking, a SR Gateway (SRGW-UPF1) entity is added.
The SRGW maps the GTP traffic into SRv6.
The SRGW is not an anchor point, and maintains very little state.
For this reason, both IPv4 and IPv6 methods scale to millions of UEs.

5.3. Enhanced mode with unchanged gNB GTP behavior
5.3.1. / 5.3.2. | Interworking with IPv6 / IPv4 GTP
End.M.GTP6.D End.DT4 or End.DT6
PSP
End
T.M.Tmap End.DT4 or End.DT6
PSP
End
T.Encaps.Red
<C1, S1, SRGW::TEID,gNB>End.M.GTP4.E
End.M.GTP6.E
T.Encaps.Red
<C1, S1, SRGW::TEID,gNB>

Slide 6 : https://datatracker.ietf.org/meeting/103/materials/slides-103-dmm-a-smooth-migration-of-mobile-core-user-plane-from-gtp-to-srv6-00
“A Smooth Migration of Mobile Core User Plane from GTP to SRv6”
IETF103 Bangkok, November, 2018 | Arashmid Akhavain, Chenchen Liu @Huawei / Pablo Camarillo @Cisco

Proof Of Concept ... Topology and Results

POC Topology and Results
Partial migration of GTP to SRv6 without Control Plane change
SRv6 Drop-In Replacement for GTP
GTP
Client
SRGW
(P4 Switch)
SRGW
(VPP)
GTP
ServerGTP/IPv4 GTP/IPv4
<= End.M.GTP4.E <= T.M.Tmap
SRv6
• GTP to SRv6 stateless translation
• No SRH overhead (one segment)
• No change in Control Plane
=> T.M.Tmap => End.M.GTP4.E

GTP  SRv6 Translation Logic
GTP
Client
SRGW
(P4 Switch)
SRGW
(VPP)
GTP
ServerGTP/IPv4 GTP/IPv4
<= End.M.GTP4.E
<= T.M.Tmap
SRv6
① ②
SRv6 SID : fc34:5678:ac14:0002:ac14:0001:0000:0064
Dst: 172.20.0.2
Src: 172.20.0.1
TEID: 100
PREFIX
SRv6 SID
① ①②
① ①②
Packet Captured
in private network
different from POC

GTP
Client
SRGW
(P4 Switch)
(Tofino)
SRGW
(VPP)
GTP
Server
GTP/IPv4 GTP/IPv4
<= End.M.GTP4.E
<= T.M.Tmap
SRv6
Dst: 2604:1380:3000:757f:a00:1ce1:0:2 TEID
48.0.117.127
10.0.28.225
48.0.117.127
10.0.28.225
2604:1380::
2001:200::
Eyes Only
Includes Public IP used in actual POC environment

GTP
Client
SRGW
(P4 Switch)
(Tofino)
SRGW
(VPP)
GTP
Server
GTP/IPv4 GTP/IPv4
<= End.M.GTP4.E
<= T.M.Tmap
SRv6
Dst: 2001:200:0:1ce1:3000:757f:0:2 TEID
0.0.28.225 (*)
48.0.117.127
48.0.117.127
10.0.28.225
2604:1380::
2001:200::
Eyes Only
Includes Public IP used in actual POC environment
(*) SRGW (P4 Switch)
translates dst addr
with mask 10.x.x.x to
workaround limitation
due to available public
IPv6 address range.

Proof Of Concept ... Findings

• (T.M.Tmap) (End.M.GTP4.E) Should we (not) add SRH when single SID was
specified?
• “6.6. T.M.Tmap” psudo code does NOT insert SRH, but just encap in IPv6 packet.
• “6.5. End.M.GTP4.E” assumes there is SRH (4. pop the SRH).
• If not having SRH is acceptable, then we should update End.M.GTP4.E description
(psudo code) as well.
• We might want to do traffic engineering together with GTP to SRv6 translation.
Thus, we should update T.M.Tmap to support both cases … no SRH with single SID,
push SRH when two or more SIDs was specified including the one generated as
“SRGW-IPv6-LOC-FUNC:IPv4DA:IPv4SA:TUN-ID”
Error in the Mobile Uplane draft & Improvements

• (T.M.Tmap) GTP header info other than TEID will be lost.
• Flags ... has_seq (and others)
• Message Type ... GTPMSG_ECHO(1), GTPMSG_ECHOREPLY(2),
GTPMSG_TPDU(255)
• (T.M.Tmap) How to set correct “Next Header” to SRv6 packet?
• Protocol in GTP Payload cannot be identified from the packet itself. Assumption is
GTP in/out gateway understands the protocol the user (UE) is using.
• Maybe “T.M.Tmap” should have a parameter to specify “Next Header” value and
let controller configure it?
• What will be the number for unstructured data? 59??
Issues due to protocol design

• (T.M.Tmap) UDP source port number would not be stored when
“T.M.Tmap” is applied.
• GTP packet could change before / after going through SRv6. (Unless it is 2152)
• Use port “2152” for both source and destination packet.
• This should NOT be a problem because actual GTP-U session is uni-directional.
• (T.M.Tmap) (End.M.GTP4.E) PREFIX length longer than 32 bits?
• Operator might only have PREFIX longer than 32bits available.
• ex: Very small MVNO, Private LTE or POC testing like we did.
• Possible solution is to configure PREFIX with length “32+n” and set IPv4 higher n
bits as part of SRv6 function parameter.
Minor Issues / Improvements

• (End.M.GTP4.E) Should SRGW drop packet when header of SRv6
payload was invalid from the one specified in “Next Header” field?
• Or should SRGW blindly translate SRv6 to GTP?
• Should SRGW log this when it found the mismatch?
• Cons are too many logs generated while operator is aware (so mismatch
would not happen) or doesn’t need to be aware of what UE is sending.
Implementation considerations

Proof Of Concept
... SRv6 Implementations

POC SRv6 Implementations
Mobile functions (T.M.Tmap, End.M.GTP4.E) developed by ...
VPP ... by Pablo@Cisco
P4 Switch ... by Apresia Systems,
based on P4-16 SRv6 by Milad@Barefoot
But both VPP and P4 implementations are closed source (as of today)
.....
Seeking to develop Open Source implementations,
so anyone can reproduce POC and expand !! ☺

SRv6 on VPP (Vector Packet Processing)
https://fd.io/technology/
• Input as Packet Vector
• Process based on graph of nodes
(ethernet, mpls, ip6, arp …)
• New functionality could be added by
customizing node or creating plugin
SRv6 node: sr_localsid_node, sr_policy_*_node
DPDK (User Land)

SRv6 on VPP (by FD.io project)
Supported functions as of 2019/01/16
http://www.segment-routing.net/open-software/vpp/

Extending SRv6 functions
https://docs.fd.io/vpp/19.04/srv6_plugin_doc.html
$ git clone https://gerrit.fd.io/r/vpp
~/vpp/src/examples/srv6-sample-localsid$ ls
node.c srv6_localsid_sample.h
srv6_localsid_sample.c
srv6_sample_localsid_doc.md

IETF 104 Hackathon @Prague, Czech
https://trac.ietf.org/trac/ietf/meeting/wiki/104hackathon

Reference: P4 Workshop 2018 in Tokyo
“Wedge 100 BF Switch Introduction and SRv6 Demonstration | APRESIA Systems & Edgecore” Slide 8 https://www.barefootnetworks.com/products/brief-tofino/
P4-16 SRv6 Implementation running on Wedge100BF-32X

p4srv6 ... Open Source P4-16 SRv6 on BMv2

Proof Of Concept ... Future plans

POC Future plans
• Feedback findings to IETF DMM working group and SRv6 Mobile Uplane draft
• https://datatracker.ietf.org/doc/draft-ietf-dmm-srv6-mobile-uplane/
• Develop Open Source P4 SRv6 implementations (p4srv6 and more?)
• Develop and upstream SRv6 Mobile Functions on VPP (at IETF)
• POC next Phase
• TE enabled GTP to SRv6 translation (T.M.Tmap with SRH)
• Direct SRv6 to DN translation
• 5.3. Enhanced mode with unchanged gNB GTP behavior 5.3.2. Interworking with IPv4 GTP
• User data  GTP  SRv6  User data (DN: upstream) | Requires control plane change (S11)
• Wireless UE
Next Steps

SRv6 Mobile User Plane : Initial POC and Implementation

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Semelhante a SRv6 Mobile User Plane : Initial POC and Implementation

Semelhante a SRv6 Mobile User Plane : Initial POC and Implementation (20)

Mais de Kentaro Ebisawa

Mais de Kentaro Ebisawa (20)

Último

Último (20)

SRv6 Mobile User Plane : Initial POC and Implementation