EMERGE IE1 Motors are TEFC squirrel cage motors are known for their compact structured, low noise, high efficiency, high torque, excellent starting performance and easy servicing design.Efficient Electric Motors
The Path to Product Excellence: Avoiding Common Pitfalls and Enhancing Commun...
Certified three phase induction motors
1. IE2/IE3 Certified Three Phase Induction Motors
EMERGE IE2 certified Energy Efficient High Efficiency Motors are TEFC squirrel cage motors
manufactured exactly in the same IEC frame sizes as IE1 motors for easy interchange ability and
replacement with the existing running IE1 / EFF2 or older motors. They have all the features and
specifications as offered in the IE1 range, but offer higher full load efficiencies and also higher flat
uniform horizontal efficiency curve from part loads as low as 40% to 100% than the standard IE1 / EFF2
or older motors with no efficiency category or marking.
EMERGE IE2 Energy Efficient High Efficiency Motors, like all high efficiency motors will offer and deliver
better savings and results for motors with S1 duty cycles, operating continuously for long durations than
motors which operate for short times or with frequent starts and stops. Hence, they are recommended
for use in applications where motors run continuously. Since the IE2 motors cost more than the
standard and IE1 motors due to use higher content of low loss magnetic materials, more winding to
reduce thermal losses and manufactured to closer tolerances to reduce air gap etc., the benefit analysis
or value for money is done based on pay back of the extra cost incurred. The long continuously running
applications lead to more savings and reduction in the payback period to offset the additional cost
incurred. These are especially so for the lower frames from 80 to 160 where the difference in efficiency
& hence savings is substantial than the standard motors in same frames. In many of the higher frames in
our IE1 series, we offer the IE2 efficiency levels as our standard and hence there may not be a need to
go in for separate IE2 series. This applies to all our motors in 280 frames and above. For frames 160 –
250, the application can be studied or an energy audit conducted to estimate the difference in
efficiencies and the resultant savings and then a decision can be made.
EMERGE Motors are manufactured in high efficiency production lines with high quality machining
centers, high speed stamping system and automatic winding machines with a strict quality control
process in selection of materials, in manufacturing, assembly and testing with an automated microcomputer test centre and a well-coordinated measurement system.
Other Features
Energy efficient IE3 certified Motors can also be offered
Protection class : IP55
Rated Voltage 415V. Can offer 380V, 400V and 440V also.
Rated frequency 50HZ, can offer 60HZ also.
Various cooling arrangements
Ambient temperature 400 C.
Standard motors performance for altitudes 1000M above sea level.
2. Dynamically balanced rotor & shaft
Vacuum Pressure Impregnated Motor
Low noise level
CE / SA certified Motors
If you Want to More Information Please visit our website: http://www.emerge-india.com