Huawei Switch How To - TIME SCHEDULED POE
•
0 gostou•2,819 visualizações
In this lesson HOW TO, TIME SCHEDULED POE. Follow us!
![SETTING TIME SCHEDULED POE
At this time energy costs are slowly growing day by day. Within each network infrastructure, energy conservation
has become very important to be considered by all businesses. In a network infrastructure that include hundreds of
POE IP phones, you can save hundreds of kWh per year and $ by switching off all unused POE IP phones during
non-business hours. In the description of this basic procedure we will assume that we are able to log in to the switch
through telnet or through the console port. We desire to power off a specific port of the switch for a specific period
of time. At the end of specified period of time POE will resume automatically.
<Huawei> system-view
[Huawei] time-range Telephony 19:00 to 23:59 working-day
[Huawei] time-range Telephony 00:00 to 07:00 working-day
[Huawei] time-range Telephony 00:00 to 23:59 off-day
Enter the configuration view
Define a time range, setting a name.
Here «Telephony». Then set this period
inside a week. Options available are
«working-day» or «off-day» for
weekend days.
Neverassign a time range as 19:00 to 07:00. This will cause an error, instead use multiple line to cover all the day round if multiple intervals are desired
1. First of all set a time range](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recomendados
Recomendados
Mais conteúdo relacionado
Último
Último (20)
Destaque
Destaque (20)
Huawei Switch How To - TIME SCHEDULED POE
- 1. HUAWEI QUIDWAY S5700 HOW-TO TIME SCHEDULED POE www.ipmax.it
- 2. SETTING TIME SCHEDULED POE At this time energy costs are slowly growing day by day. Within each network infrastructure, energy conservation has become very important to be considered by all businesses. In a network infrastructure that include hundreds of POE IP phones, you can save hundreds of kWh per year and $ by switching off all unused POE IP phones during non-business hours. In the description of this basic procedure we will assume that we are able to log in to the switch through telnet or through the console port. We desire to power off a specific port of the switch for a specific period of time. At the end of specified period of time POE will resume automatically. <Huawei> system-view [Huawei] time-range Telephony 19:00 to 23:59 working-day [Huawei] time-range Telephony 00:00 to 07:00 working-day [Huawei] time-range Telephony 00:00 to 23:59 off-day Enter the configuration view Define a time range, setting a name. Here «Telephony». Then set this period inside a week. Options available are «working-day» or «off-day» for weekend days. Neverassign a time range as 19:00 to 07:00. This will cause an error, instead use multiple line to cover all the day round if multiple intervals are desired 1. First of all set a time range
- 3. ASSIGN TIME SCHEDULED POE TO A SPECIFIC INTERFACE [Huawei] interface GigabitEthernet0/0/1 [Huawei-GigabitEthernet0/0/1]poe power-off time-range Telephony [Huawei-GigabitEthernet0/0/1]quit [Huawei] quit <Huawei> 2. Select interface to apply POE scheduling Apply the time range previously defined, at the interface
- 4. VERIFYING POE SETUP -<Huawei> display poe power-state interface GigabitEthernet0/0/1 - Port legacy detect : disable - Port power enabled : enable - Port power ON/OFF : on - Port power status : Powered - Port PD class : 2 - Port reference power(mW) : 7000 - Port power priority : Low - Port max power(mW) : 30000 - Port current power(mW) : 1961 - Port peak power(mW) : 2067 - Port average power(mW) : 1603 - Port current(mA) : 37 - Port voltage(V) : 53 3. During business hours displaying POE port status will result:
- 5. VERIFYING POE SETUP -<Huawei> display poe power-state interface GigabitEthernet0/0/1 - Port legacy detect : disable - Port power enabled : enable - Port power ON/OFF : off - Port power status : Time-range power-off - Port PD class : - - Port reference power(mW) : - - Port power priority : Low - Port max power(mW) : 30000 - Port current power(mW) : 0 - Port peak power(mW) : 0 - Port average power(mW) : 0 - Port current(mA) : 0 - Port voltage(V) : 0 4. During NON business hours, displaying POE port status will result: A last note. Transition from «Time-range powered-off» status to a stable «Powered» status will take a couple of minutes.
- 6. MORE NEEDS? See hints on www.ipmax.it Or email us your questions to info_ipmax@ipmax.it
- 7. IPMAX IPMAX is a Huawei Partner in Italy. IPMAX is the ideal partner for companies seekingquality in products and services. IPMAX guaranteesmethod and professionalismto support its customers in selecting technologieswith the best quality / price ratio, in the design, installation, commissioning and operation. IPMAX srl Via Ponchielli, 4 20063 Cernusco sul Naviglio (MI) – Italy +39 02 9290 9171