miniUSB Programmer is suitable for firmware download to Flyport modules on Nest boards.
http://www.eikonsite.it/products/MINIUSB+PROGRAMMER+FLYPORT/MINIUSB+PROGRAMMER.aspx
1. compact USB Programmer
Introduction
Each Flyport module has a serial bootloader preloaded onboard.
• Mini USB connector
The miniUSB PROGRAMMER is a USB to Serial (UART) con-
verter with a 6 ways female pin header connector. It is the • 6 pin programming
interface
standard programming interface for the expansion boards.
• Easy install drivers
The miniUSB PROGRAMMER provides 5V power supply to the
boards. • openPICUS Free IDE
The miniUSB PROGRAMMER is 100% compatible with the • Serial Bootloader
openPICUS Free IDE • 5V power supply
• 51*27.5mm
Facts
USB interface mini USB B-type (cable not provided)
Programming interface 6 ways pin header at 2.54mm (0.10”) pitch
Device Reset MOSFET onboard
Communication RESET and UART communication
Power supply 5V output
Compact dimensions 51 * 27.5 mm
Benefits Devices
• Easy to install • Flyport Wi-Fi
• Easy to manage and use • Flyport Ethernet
• Easy to interface • Expansion Nests
• Zero Time for development
• Open source
info@eikonsite.it www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy Rev.1 03/02/2012 P 1
2. compact USB Programmer
JP2 PINOUT — Programming Connector
Pin Name Function
1 +5V 5V power supply
2 NC NC
3 GND Ground power supply
4 RX UART RX signal
5 TX UART TX signal
6 RESET Flyport Modules Reset
Mechanical info
powered by technology
Technical Informations
Electrical USB
Power supply 5V from USB Cable USB 2.0 Full speed compatible
Onboard LEDs for TX and RX visual feedback
Mechanical
Operating Temperature -20..+85°C
Dimensions 51*27.5mm
info@eikonsite.it www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy Rev.1 03/02/2012 P 2
3. compact USB Programmer
Applications development
Please visit openPICUS project website www.openpicus.com to download the IDE, a
getting started guide and some apps examples and libraries.
The suggested starter kit is composed by:
• miniUSB PROGRAMMER (to download firmware) Code.015371
• Proto NEST Code.015376
• Flyport Wi-Fi module Code.015350 or Code.015353
• Flyport Ethernet module Code.015356 or Code.015357
Each FlyPort Module has a serial bootloader onboard.
ORDERING INFORMATION
Buy online from www.eikonsite.it or contact your local reseller.
miniUSB PROGRAMMER
Product Code 015371
Eikon srl Partner
Via Giacomo Peroni 442
00131 Rome (RM) Italy
Tel +39 06 92916378 Fax +39 0721 054588
Web www.eikonsite.it Email info@eikonsite.it
info@eikonsite.it www.eikonsite.it tel +39 0721 0730896 Eikon srl, Rome (RM), Italy Rev.1 03/02/2012 P 3