This document discusses equilibrium of particles and free body diagrams. It provides an example of drawing a free body diagram for a cylinder suspended by two cables, and using the equations of equilibrium to solve for the unknown tensions in the cables. It also discusses 3D equilibrium, giving an example problem of finding an unknown force on a particle given its position and four other forces.
2. Condition for the Equilibrium
of a Particle
• A particle is said to be in equilibrium if:
– remains at rest (originally at rest)
– has a constant velocity (originally in motion)
• Newton’s first law of motion ΣF=0
• Newton’s second law of motion ΣF=ma a=0
Question: Does moving with constant speed implies static
conditions?
3. To determine the tensions in
the cables for a given weight
of cylinder, you need to
learn how to draw a free-
body diagram and apply the
equations of equilibrium.
This is an example of a 2-D or
coplanar force system.
If the whole assembly is in
equilibrium, then particle A is
also in equilibrium.
4. THE WHAT, WHY, AND HOW OF A
FREE-BODY DIAGRAM (FBD)
Free-body diagrams are one of the most important things for
you to know how to draw and use for statics and other subjects!
What? - It is a drawing that shows all external forces
acting on the particle.
Why? - It is key to being able to write the equations of
equilibrium—which are used to solve for the unknowns
(usually forces or angles).
5. How?
Active forces: They want to move the particle.
Reactive forces: They tend to resist the motion.
Note : Cylinder mass = 40 Kg
1. Imagine the particle to be isolated or cut free from its
surroundings.
A
3. Identify each force and show all known magnitudes and
directions. Show all unknown magnitudes and / or
directions as variables.
FC = 392.4 N (What is this?)
FB
FD
30˚
2. Show all the forces that act on the particle.
FBD at A
A
y
x
6. EQUATIONS OF 2-D EQUILIBRIUM
Or, written in a scalar form,
Fx = 0 and Fy = 0
These are two scalar equations of equilibrium (E-of-E).
They can be used to solve for up to two unknowns.
Since particle A is in equilibrium, the
net force at A is zero.
So FB + FC + FD = 0
or F = 0
FBD at A
A
In general, for a particle in equilibrium,
F = 0 or
Fx i + Fy j = 0 = 0 i + 0 j (a vector equation)
FBD at A
A
FB
FD
A
FC = 392.4 N
y
x
30˚
FBD at A
7. Write the scalar E-of-E:
+ Fx = FB cos 30º – FD = 0
+ Fy = FB sin 30º – 392.4 N = 0
Solving the second equation gives: FB = 785 N →
From the first equation, we get: FD = 680 N ←
Note : Cylinder mass = 40 Kg
FBD at A
A
FB
FD
A
FC = 392.4 N
y
x
30˚
EQUATIONS OF 2-D EQUILIBRIUM (continued)
8. SIMPLE SPRINGS
(linearly elastic spring)
Spring Force = spring constant (or stiffness) x deformation of spring
or F = k * s
the length of the spring will
change in direct proportion to
the force F acting on it.
Elongation or
compression
9. CABLES AND PULLEYS
With a frictionless pulley and cable
T1 = T2 for any θ
T1
T2
Unless otherwise stated, all cables (or cords):
1) Negligible weight
2) Can support only tension (or pulling force)
3) Force always acts in the direction of
the cable
10. Example 3-1: The sphere in Fig. 3–3 a
has a mass of 6 kg and is supported as
shown. Draw a free-body diagram of
the sphere, the cord CE , and the knot
at C .
Sphere Cord CE Knot
11. EXAMPLE
Plan:
1. Draw a FBD for point A.
2. Apply the E-of-E to solve for the forces in ropes AB
and AC.
Given: The box weighs 550 N and
geometry is as shown.
Find: The forces in the ropes AB
and AC.
12. EXAMPLE (continued)
FBD at point AFC
FB
A
FD = 550 N
y
x
30˚
3
4
5
Applying the scalar E-of-E at A, we get;
+ F x = FC (4/5) – FB cos 30°= 0
+↑ F y = FB sin 30° + FC (3/5) - 550 N = 0
Solving the above equations, we get;
FB = 478 N and FC = 518 N
13. 3–19 The unstretched length of spring AB is 3 m. If the block is held in the
equilibrium position shown, determine the mass of the block at D .
14. THE EQUATIONS OF 3-D EQUILIBRIUM
This vector equation will be satisfied only when
Fx = 0
Fy = 0
Fz = 0
These equations are the three scalar equations of equilibrium.
They are valid for any point in equilibrium and allow you to
solve for up to three unknowns.
When a particle is in equilibrium, the vector
sum of all the forces acting on it must be
zero ( F = 0 ) .
This equation can be written in terms of its
x, y, and z components. This form is written
as follows.
( Fx) i + ( Fy) j + ( Fz) k = 0
15. EXAMPLE
1) Draw a FBD of particle O if needed.
2) Write the unknown force as
F5 = {Fx i + Fy j + Fz k} N
3) Write F1, F2 , F3 , F4 , and F5 in Cartesian vector form.
4) Apply the three equilibrium equations to solve for the three
unknowns Fx, Fy, and Fz.
Given: The four forces and
geometry shown.
Find: The force F5 required to
keep particle O in
equilibrium.
Plan:
16. EXAMPLE (continued)
Point B (3,-4,6)
F4 = F4 (rB/ rB)
= 200 N [(3i – 4 j + 6 k)/(32 + 42 + 62)½]
= {76.8 i – 102.4 j + 153.6 k} N
F1 = {300(4/5) j + 300 (3/5) k} N
F1 = {240 j + 180 k} N
F2 = {– 600 i} N
F3 = {– 900 k} N
F5 = { Fx i + Fy j + Fz k} N
Solution:
B
17. Equating the respective i, j, k components to zero, we have
Fx = 76.8 – 600 + Fx = 0 ; solving gives Fx = 523.2 N
Fy = 240 – 102.4 + Fy = 0 ; solving gives Fy = – 137.6 N
Fz = 180 – 900 + 153.6 + Fz = 0 ; solving gives Fz = 566.4 N
Thus, F5 = {523 i – 138 j + 566 k} N
Using this force vector, you can determine the force’s
magnitude and coordinate direction angles as needed.
EXAMPLE (continued)
18. 3–67 The shear leg derrick is used to haul the 200-kg net of fish onto the
dock. Determine the compressive force along each of the legs AB and CB and
the tension in the winch cable DB. Assume the force in each leg acts along its
axis.