The Mark 86 Ambient Temperature Regulator is designed to control steam-tracing lines based on ambient temperatures. Steam tracing lines are commonly used to protect outdoor instrumentation, pipelines, and tanks from freezing. The Mark 86 allows steam to flow through the tracer lines only when it is needed and remains closed when the ambient temperature rises above a predetermined set point.

1. Jordan Valve a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
info@richardsind.com • www.jordanvalve.com
Mark 86 Series
Steam Tracing Temperature Regulators
The Mark 86 ambitemp regulator is designed to
control steam tracing lines based on ambient
temperatures. These steam tracing lines are com-
monly used to protect outdoor instrumentation,
pipelines and tanks from freezing. The Mark 86
allows steam to flow through the tracer lines only
when it is needed, and remains closed when the
ambient temperature rises above a predetermined
set point.
Sealed Welded Actuator (SWA)
The Mark 86, like our other self-acting tempera-
ture regulators, utilizes both Jordan's sliding gate
seat design and Jordan's seal-welded actuator.
The sealed welded actuator (SWA) has no elasto-
mer parts, and is utilized for its ability to provide
longer lasting service. With all steel construc-
tion, there are no parts that will wear out from
temperature effects. Although it is made with the
same materials and design, the SWA on the Mark
86 is different from our standard sealed welded
actuator. Our Jordan temperature regulators
have an SWA that consists of bulb, capillary and
diaphragm assembly. As the ambitemp valve is
only sensing the ambient temperature, the sens-
ing bulb and capillary are eliminated from the
construction.
The Mark 86 is generally installed as a normally
closed valve. As the ambient temperature falls
below the set point, the valve will open, allowing
steam to enter the tracing line system. The Mark
86 may also be set up as a normally open valve
and stroke toward closed as the ambient tem-
perature rises. TemperatureRegulators Mark86SteamTracingTemperatureRegulators
Features
• Sealed Welded Actuator – no elastomer parts
providing longer service life
• Sliding Gate Seats – features advanced slid-
ing gate seat technology
— Straight-through flow for reduced
turbulence and quiet operation
— Short stroke for fast response and
accurate regulation
— Easily interchangeable Cv's
— Tight shutoff

2. Mark 86 Steam Tracing Temperature Regulators
Specifications
-2-
Sizes: 1/2" (DN15) through 2" (DN50)
End Connections
• Threaded – FNPT, BSPT, BSPP
• ANSI Flanges – 150#, 300#
• DIN Flanges – PN 10/16, PN 25/40
• JIS Flanges – 10K, 20K
Body Materials
• Ductile Iron
• Bronze
• Carbon Steel
• Stainless Steel
Trim Materials
• 303SS for DI, BRZ & CS body valves
• 316SS for SS body valves
Seat Materials
• Jorcote on SST — Standard
• Other materials available — Consult factory
Yoke Material: Cast Iron
Stem Packing Materials
• Spring-loaded Teflon (up to 500°F, 260°C max)
• Braided (above 500°F/260°C)
Service: Steam, water, oil, gas, air and chemicals
Shutoff: ANSI Class IV
Action
• Direct (increase in temperature closes valve)
• Reverse (increase in temperature opens valve)
Body Rating: Ductile Iron up to 988 psi (68,1 bar)
and 650°F (343,3°C); Carbon Steel and Stainless
Steel up to 1480 psi (102 bar) and 650°F (343,3°C);
Bronze up to 500 psi (34,5 bar) and 500°F (260°C)
depending on specific construction. -20°F (28,9°C)
temperature limit on all materials; for other tempera-
tures, consult factory
Overheat Protection: 100°F (38°C) above top of
control range
Cv (Kv) Values & Maximum Differential Pressures:
Low Flow Cv's (Kv's) Available: reduced Cv's (Kv's)
can be used in a valve of any size as long as the
required Cv (Kv) is a smaller value than the standard
for that particular size. In addition, the following Cv
(Kv) values can be provided:
1.6
(1,4)
0.8
(0,7)
0.4
(0,4)
0,2 (0,18)
0.08
(0,07)
0.04
(0,03)
0.02
(0,017)
0.008
(0,007)
0.004
(0,003)
0.002
(0,0017)
0.0008 (0,0007)
(N/A in 316SS)
Available Temperature Control Ranges & Spans
• Standard Spring #37
Temperature Control Ranges, °F (°C)
5 to 40
(-15 to 4,4)
30 to 80
(-1 to 27)
50 to 100
(10 to 38)
80 to 130
(27 to 54)
100 to 150
(38 to 66)
115 to 170
(46 to 77)
155 to 210
(68 to 99)
Valve Size Temperature span from closed to open, °F (°C)
1/4" to 3/4"
(DN8 to DN20)
10 (6)
1" to 1-1/4"
(DN25 to DN32)
15 (8)
1-1/2" to 2"
(DN40 to DN50)
20 (11)
Note: consult factory for spans on ranges 115 - 170°F
(64 - 95°C) and 155 - 210°F (86 - 117°C)
• Light Spring #152
Temperature Control Ranges, °F (°C)
0 to 20
(-18 to -7)
25 to 60
(-4 to 16)
45 to 80
(7 to 27)
75 to 110
(24 to 43)
100 to 130
(38 to 54)
115 to 150
(46 to 66)
155 to 190
(68 to 88)
Valve Size Temperature span from closed to open, °F (°C)
1/4" to 3/4"
(DN8 to DN20)
6 (3)
1" to 1-1/4"
(DN25 to DN32)
10 (6)
1-1/2" to 2"
(DN40 to DN50)
13 (7)
Note: consult factory for spans on ranges 95 - 130°F
(53 - 72°C), 115 - 160°F (64 - 89°C), 145 - 180°F
(81 - 100°C), and 155 - 190°F (86 - 106°C)
Valve Size Flow Coefficient Seat
Material
Max ∆P
Inches DN Cv Kv PSI Bar
1/2" or
3/4"
15 or 20
2.5 or
4.4
2,2 or
3,8
SST 125 8,6
Jorcote 300 20,7
1" or
1-1/4"
25 or 32
6.4 or
9.5
5,5 or
8,2
SST 125 8,6
Jorcote 250 17,2
1-1/2" 40 15 12,9
SST 75 5,2
Jorcote 175 12,1
2" 50 25 or 30
21,5 or
25,8
SST 75 5,2
Jorcote 175 12,1

3. Mark 86 Steam Tracing Temperature Regulators
-3-
Dimensions
2" (51mm)
D
B
C
A
A1
Valve
Size
Material
Dimensions (Inches) Weight
lbsA B C D
1/2" &
3/4"
DI/BRZ 3.62 12.00 2.18 7.00 20
CS/SS 3.62 12.00 2.18 7.00 21
1"
DI/BRZ 4.12 12.25 2.62 7.00 22
CS/SS 4.12 12.25 2.62 7.00 23
1-1/4" DI/BRZ 4.12 12.25 2.62 7.00 22
1-1/2"
DI/BRZ 4.50 12.75 2.75 7.00 24
CS/SS 4.65 12.75 2.75 7.00 25
2"
DI/BRZ 4.50 12.81 3.00 7.00 24
CS/SS 5.50 12.81 3.00 7.00 27
Valve
Size
Material
Dimensions (Metric) Weight
kgsA B C D
DN15,
DN20
DI/BRZ 91,9 304,8 55,4 178 9
CS/SS 91,9 304,8 55,4 178 9,5
DN25
DI/BRZ 104,6 311,2 66,5 178 10
CS/SS 104,6 311,2 66,5 178 10,5
DN32 DI/BRZ 104,6 311,2 66,5 178 10
DN40
DI/BRZ 114,3 323,9 69,9 178 11
CS/SS 118,1 323,9 69,9 178 11
DN50
DI/BRZ 114,3 325,4 76,2 178 11
CS/SS 139,7 325,4 76,2 178 12
• Threaded & FSW Ends
• Threaded & FSW Ends, DIN
• Flanged Ends
Valve
Size
ANSI
Flange
Dimensions (Inches) Weight lbs
A1
B C D DI/BRZ CS/SS
1/2"
150# 7.25 12.00 2.18 7.00 21 23
300# 7.50 12.00 2.18 7.00 22 24
3/4"
150# 7.25 12.00 2.18 7.00 22 25
300# 7.62 12.00 2.18 7.00 23 28
1"
150# 7.25 12.25 2.62 7.00 24 28
300# 7.75 12.25 2.62 7.00 25 30
1-1/4"
150# 7.87 12.25 2.62 7.00 25 30
300# 8.37 12.25 2.62 7.00 26 32
1-1/2"
150# 8.75 12.25 2.75 7.00 27 32
300# 9.25 12.75 2.75 7.00 30 38
2"
150# 10.00 12.81 3.00 7.00 29 38
300# 10.50 12.81 3.00 7.00 31 42
Valve
Size
Flange
(PN)
Dimensions (Metric) Weight kgs
A1
B C D DI/BRZ CS/SS
DN15
10/16 184,2 304,8 55,4 177,8 9,5 10,5
25/40 190,5 304,8 55,4 177,8 10 11
DN20
10/16 184,2 304,8 55,4 177,8 10 11
25/40 193,5 304,8 55,4 177,8 10,5 13
DN25
10/16 184,2 311,2 66,5 177,8 11 13
25/40 196,9 311,2 66,5 177,8 11 13,5
DN32
10/16 199,9 311,2 66,5 177,8 11 13,5
25/40 212,6 311,2 66,5 177,8 12 14,5
DN40
10/16 222,3 311,2 69,9 177,8 12 14,5
25/40 235,0 323,9 69,9 177,8 13,5 17
DN50
10/16 254,0 325,4 76,2 177,8 13 17
25/40 266,7 325,4 76,2 177,8 14 19
• Flanged Ends, DIN

4. MK86/0517
Jordan Valve a division of Richards Industries
3170 Wasson Road • Cincinnati, OH 45209
513.533.5600 • 800.543.7311 • 513.871.0105 (f)
info@richardsind.com • www.jordanvalve.com
Mark 86 Steam Tracing Temperature Regulators
Ordering Schematic
Model
86 Standard
Size
025 1/4" (DN8)
038 3/8" (DN10)
050 1/2" (DN15)
075 3/4" (DN20)
100 1" (DN25)
125 1-1/4" (DN32)
150 1-1/2" (DN40)
200 2" (DN50)
Body Material
DI Ductile Iron
BR Bronze
CS Carbon Steel (WCB)
S6 Stainless Steel (CF8M)
1 & 2 End Connections
PT NPT
BT BSPT
BP BSPP
SW FSW
I5 150# IFE CS or SST valves
I3 300# IFE CS or SST valves
I7 IFE PN10 CS or SST valves
I6 IFE PN16 CS or SST valves
I8 IFE PN25 CS or SST valves
I4 IFE PN40 CS or SST valves
16 Action
D Direct
R Reverse
9 & 10 Thermowell
00 None
Model No Size Body Mat'l 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
7 & 8 Range
10 5~40 (-15~4) 09 0~20 (-18~-7)
18 30~80 (-1~27) 15 25~60 (-4~16)
25 50~100 (10~38) 22 45~80 (7~27)
34 80~130 (27~54) 31 75~110 (24~43)
39 100~150 (38~66) 38 100~130 (38~54)
48 115~170 (46~77) 45 115~150 (46~66)
57 155~210 (68~99) 55 155~190 (68~88)
ZZ Non-Standard
11 & 12 Bulb
00 None
3 & 4 Trim
T3 303SS
T6 316SS
ZZ Non-standard
13 & 14 Capillary/Armor
00 None
15 Actuator
A Standard
5 & 6 Seats
Material Cv (Kv)
A 303 SST 1 0.21 (0.18)
B 316 SST 2 0.42 (0,36)
V 303SS/Jorcote 3 0.84 (0,72)
W 316SS/Jorcote 4 1.6 (1,4)
5 2.5 (2,2)
6 4.4 (3,8)
7 6.4 (5,5)
8 9.5 (8,2)
9 15.0 (12,9)
A 25.0 (21,5)
B 30.0 (25,8)
ZZ Non-Standard