E profiil references

2. Wireline Riser Tensioners Systems
 Client National Oilwell Varco Norway AS
 Project Wireline Riser Tensioners Systems
 Period 2013/2014
 Vessel Seadrill No 12 Hull No 2101
 Dimensions Weight 20 000kg
 Description
 Scope of work: steel manufacturing, surface treatment, NDT,
hydraulic and electrical assembly, functional test.
 The wireline riser tensioner system is installed on the floating
drilling rig or drillship to maintain a pre-selected vertical tension
in the riser.
 E-Profiil has produced 100+shipsets of wireline
tensioner systems for Drillships

3. Azipod mounting block X-S3000
 Client ABB OY
 Project Azipod X-S3000
 Period 2013/2014
 Vessel Shipyard Fincantieri Italy.
Hull No 6278
 Dimensions Ø 5340mm, height 1600mm
Weight 29 800kg
 Description
 Scope of work: Steel manufacturing, heat treatement, NDT,
surface treatment.
 Steel plates Mounting Block weld. / AZIPOD X.

4. Azipod Thruster
 Client ABB OY
 Project Azipod XO2300
 Period 2015/2016
 Vessel B34
 Dimensions 7534x 7678x 3035mm
Weight 66 126kg
 Description
 Scope of work: Steel manufacturing, heat treatement, NDT,
surface treatment, machining.
 The Azipod (which stands for Azimuthing electric podded drive)
unit is an electrically driven propeller mounted on a pod, which
rotates 360° around its vertical axis and delivers thrust in any
direction for unprecedented maneuverability.

5. Catwalk Pipe Conveyor
 Client Cameron Sense AS
 Project Catwalk, Hebron Topside Project
 Period 2013/2014
 Dimensions 4074x 18460x 3320mm
Weight 27 000kg
 Description
 Scope of work: steel manufacturing, surface treatment, assembly
-mechanical, electrical and hydraulical, manufacturing
acceptance and functional test.
 Catwalk moves multiple joints to and from the drillfloor at one
time, reducing catwalk running time. The catwalk controls
horizontal handling of tubulars, and is safe and easy to work
with.

6. HMF 2500 A- Frame
 Client MCG Cargotec Norway AS
 Project HMF 2500 A-frame
 Period 2013/2014
 Vessel Havila Phoenix Conversion
 Dimensions 17268x 26004x 15090mm
Weight 249 000kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
trial assembly.
 A-Frames are designed to perform a broad range of operations,
such as offshore load handling (plough deployment), subsea
load handling (anchor handling) and launch and recovery of
special tools and equipment.

7. Winch Foundation
 Client MCG Cargotec Norway AS
 Project HMW 2500 Winch Foundation
 Period 2013/2014
 Vessel Volstad Marine, Hull No 91
 Dimensions 6630x 5550x 4800mm
Weight 35 000kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
machining.

8. Winch Flanges
 Client MCG Cargotec Norway AS
 Project HMW-6000 Winch Flanges
 Period 2013/2014
 Vessel Sealion MOCV, Hull No 2649
 Dimensions  7500x1450mm
Weight: 2 x 55 806kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
machining.

9. Lattice Booms
 Client Kenz Figee, Kenz Cranes BV
 Project Lattice Booms (primary & secondary
structures)
 Period 2013
 Dimensions 50 951x 3524mm
Weight 37 400kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
control assembly, shipping.
 Main Boom and Boom Head for Pedestal Crane.

10. Riser Clamps
 Client Technip Norge AS
 Project 7 ROV clamps for a project West of Shetland
 Period 2014 Fast Track (8 weeks)
 Dimensions Total weight of 7 clamps 75 000 kg,
relevant size 3,5 m long
 Description
 Scope of work: Project involved manufacturing, hydraulical
assembly and functional testing. Test frame was designed and
built by E-Profiil.
 Production time from drawings to painting 8 weeks. Assembly
mechanical and hydraulical 2 weeks. Factory acceptance test 2
weeks.
 The clamps were used for the riser recovery operations during
the spring 2014.

11. Åsgard Subsea Compression
 Client Technip Norge AS
 Project CSB Tulip (moonpool deflector)
 Period 2014 Fast Track (7 weeks)
 Vessel North Sea Giant
 Dimensions 5190x 5510x 8284mm,
Weight 16 306kg
 Description
 Scope of work: steel manufacturing, surface treatment, NDT,
control assembly and testing of pad eyes.

12. Hang-off tower
 Client Technip Norge AS
 Project NR013041 Goliat Development
 Period 2015 Fast Track (10 weeks)
Assembly in Hammerfest (1,5 weeks)
 Dimensions 13 600x 16800x 6450mm
Weight 52 300kg
 Description
 Scope of work: Project involve manufacturing, NDT, control
assembly, final assembly in Norway.

13. Module Handling Compensator
• Client National Oilwell Varco Norway AS
• Project G1361 Module Handling Compensator
• Vessel Saipem FDS 2
• Period May – October 2015
• Dimensions 10 750x 6000x 4085mm
Weight 135 195kg
• Description:
• Scope of work: Steel manufacturing, heat treatement, surface
treatment, trial assembly.

14. Chain stopper DACS & LAW
 Client Scana Offshore Vestby
 Project Dual Axis Chain stopper, DACS & LAW
 Period August – December 2015
 Dimensions 6992x 1323x 2270mm
Weight 19 000kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
mechanical , electrical, hydraulical assembly, final assembly and
FAT in Paldiski Offshore Base.
 Can be installed on all types of vessels and for all chain sizes.
Their function is to arrest a rendering chain and protect the motor
for abnormal forces thus contributing to a safer anchoring
operation.

15. Block assembly & Hook test
 Client National Oilwell Varco, Hydralift AmClyde
 Project 900 MT block
 Period Dec 2015
 Dimensions 7031x4980x1440mm (9748mm with hook)
47 487kg
 Description
 Scope of work: Steel manufacturing, heat treatement, NDT,
machining, surface treatment, assembly, FAT, load test 1100t.

16. 400T crane G1705
 Client National Oilwell Varco Norway AS
 Project AHC Knuckle Boom Crane
 Period 2013/2014
 Vessel STX OSV SØVIKNES,
Normand Vision
 Dimensions 34414x 10360x 12454mm
Weight 419 808kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
mechanical , electrical, hydraulical assembly, final assembly in
Paldiski Offshore Base.

17. Dredger Cranes
 Client IHC Holland B.V.
 Project Gantries
 Period Oct 2016 – Jan. 2017
 Vessel Beagle 8
 Dimensions 7268x 2829x 1866mm
6-8 tons
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
mechanical assembly, functional testing.

18. Spiral Case and Stay Ring
 Client Andritz Hydro GmbH
 Project Sogamoso, Columbia powerplant
 Period 2010/2011
 Dimensions 17 442x 6854x 6400 mm
Weight 251 767kg
 Description
 Scope of work: Steel manufacturing, heat treatement, surface
treatment, trial assembly.
 Spiral casing of a hydraulic turbine is very essential part for even
distribution of kinetic energy of water along the periphery of the
guide vanes and runner.
 Stay ring of the spiral casing is responsible for mechanical
strength of the spiral casing and it guides the water at proper
angle through stay vanes.

19. Välimerenkadu bridge
• Client M.Rautio OY
• Project Välimerenkadu bridge
• Period 2016/2017
• Dimensions 42000x 12000x 6850mm
Weight 90 000kg
• Description:
• Scope of work: Steel manufacturing, surface treatment, NDT, final
assembly in Paldiski Offshore Base.

20. Azipod flange rough machining
 Client Baltic Workboats
 Project Azipod flange machining
 Period Nov 2016
 Dimensions Ø 3220 – Ø 2860
 Scope of work:
 Azipod flanges machining OD-ID Ø3220-Ø 2860; O-ring groove
machining;
 Thread holes M24x48pcs; Machining allowance 10mm
 Requirements for machining: Flange flatness after machining –
max 1,0 mm; Ra 6,3
 Result: Flange flatness after machining – max 0,25 mm; Ra 3,2

21. Skidshoes & Starterbeams
 Client ALE Heavylift
 Project 50x800t skidshoes & 12x starterbeams
 Period Sept 2016 – January 2017
 Dimensions 4700x1250x800mm & 5650x1700x630mm
Weight 1x4647kg & 1x10522kg
 Description
 Scope of work: Steel manufacturing, heat treatement, NDT,
surface treatment, machining, material S690.
 These high capacity skid shoes are suited for site moves, load-
outs and other heavy transport work globally.

22. Levelwind and Take-Up Winch
 Client Hydralift AmClyde Inc.
 Project Levelwind and Take-Up Winch
 Period March –September 2015
 Dimensions Winch 8208 x Ø5200mm
Weight 57 700kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
mechanical, electrical, hydraulical assembly, final assembly and
functional test in Paldiski Offshore Base.

23. Hose Reel & Hawser Winch
 Client Scana Offshore Vestby AS
 Project Hose Reel fabrication,
LIBRA project, for FPSO
 Period 2016
 Dimensions 15 319x11 057x11 089mm
Weight 85 000kg
 Description
 Scope of work: steel manufacturing, surface treatment, NDT,
assembly, testing.
 The Hose Reel is located on the aft end of the FPSO and
designed for storage of the floating hose in one layer, and
mooring to the Shuttle Tanker.
 The Offloading Hose Reel has 2 purposes, storage of the hose
between offloading and as a part of the oil transfer system when
offloading to a shuttle tanker.

24. 250T crane L4517
 Client National Oilwell Varco Norway AS
 Project AHC Knuckle Boom Crane
manufacturing with testing
 Vessel Hull no 237
 Period 2014/2015
 Dimensions 39 228x11 345x10 496mm
Weight 585 795kg
 Description
 Scope of work: Steel manufacturing, surface treatment, NDT,
mechanical , electrical, hydraulical assembly, final assembly and
testing in Paldiski Offshore Base.

25. AGV all- electric automated guided vehicle
• Client Cargotec Finland Oy
• Project 18 x AGV - all-electric automated
guided vehicle (prototype)
• Period 2016/2017
• Dimensions 14 670x3000x1960mm
Weight 25 000kg
• Description:
• Scope of work: Steel manufacturing, surface treatment,
mechanical , electrical, hydraulical assembly, final
assembly in Paldiski Offshore Base.

26. Lattice Boom Crane
• Client National Oilwell Varco Norway AS
• Project Asgard Lattice Boom Crane,
manufacturing with testing
• Period 2016/2017
• Dimensions 9588x20 377x59 638 mm
Weight 146 000 kg
• Description:
• Scope of work: Steel manufacturing, surface treatment,
mechanical , electrical, hydraulical assembly, final assembly and
testing in Paldiski Offshore Base.

27. K-WALK GANGWAY FOR OFFSHORE WIND
• Client Kongsberg
• Project Olympic Shipping Gangway for Offshore Wind
manufacturing with testing and mobilization
• Period 2017/2018
• Dimensions 9000 x 30 000 x 60 000 mm
Weight 160 000 kg
• Description:
• Scope of work: Steel manufacturing, surface treatment,
mechanical , electrical, hydraulical assembly, final assembly and
testing & mobilization in Paldiski Offshore Base.

28. Phone: +372 686 9201
Fax: +372 686 9200
info@eprofiil.ee
eprofiil.ee
GET IN TOUCH TO
DISCUSS YOUR NEEDS
E-Profiil AS
Valukoja 7/2
11415 Tallinn
Estonia