mos transistor

Digital Integrated Circuits © Prentice Hall 1995Introduction
MOS Transistor

MOS Structure
( Two Terminal MOS Structure )

Metal Oxide(Sio2) Semiconductor
MOS Structure
( Energy band diagram for Metal, Oxide(Sio2) and
Semiconductor )

MOS Structure

( Energy band diagram of Combined MOS system )
E0
E0
E0 E0
MOS Structure

MOS System under External Bias

MOS System under External Bias
( N MOS operating in surface inversion region )

Structure and Operation of MOSFET
( N channel Enhancement MOSFET )

( Formation of Depletion Region in N type
Enhancement type MOSFET )

Threshold voltage
( N channel depletion MOSFET )

Operation of MOSFET Transistor
a) Linear region

b) Saturation region

c) Beyond Saturation region

Characteristics of MOSFET
a) Gradual Channel Approximation

a) Gradual Channel Approximation
( V- I characteristics of nMOS Transistor )

Depletion Region
hole diffusion
electron diffusion
p n
hole drift
electron drift
Charge
Density
Distance
x+
-
Electrical
xField
x
Potential
V


W2-W1

(a) Current flow.
(b) Charge density.
(c) Electric field.
(d) Electrostatic
potential.

The Diode
n
p
p
n
B A
SiO2
Al
A
B
Al
A
B
Cross-section of pn-junction in an IC process
One-dimensional
representation diode symbol

Diode Current

Forward Bias
x
pn0
np0
-W1 W2
0
pn(W2)
n-regionp-region
Lp
diffusion

Reverse Bias
x
pn0
np0
-W1 W2
0
n-regionp-region
diffusion

SPICE Parameters

nMOS Transistor - Structure

The MOS Transistor
n+n+
p-substrate
Field-Oxyde
(SiO2)
p+ stopper
Polysilicon
Gate Oxyde
DrainSource
Gate
Bulk Contact
CROSS-SECTION of NMOS Transistor

Carriers and Current
 Carriers always flow from the Source to Drain
 NMOS: Free electrons move from Source to Drain.
 Current direction is from Drain to Source.
• PMOS: Free holes move from Source to Drain.
 Current direction is from Source to Drain.

IGFET
 The dimension of SiO2 layer is about 0.02 to 0.1
micron.
 Gate is isolated thus Insulated-Gate FET
 Due to insulation the current flowing through the gate
terminal is extremely small of the order of 10^-15 A.
 Drain is always kept as more positive than the
source.
 The current flows from the Drain to Source
 P-n junctions are kept under the reverse bias
conditions
 Typically the Length of the device is from 1 to 10
micron.

MOS Transistor
structure
 Polysilicon –Heavily doped noncrystalline silicon.
 Polysilicon allows the dimensions of the transistor to
be realized accurately.
 Gate Oxide – Silicon dioxide.
 Thickness of gate oxide – 7 to 20nm.
 No d.c. through gate.
 Normally, p substrate is connected to 0V in digital
circuits and to negative voltage in analog circuits.

Symmetry
The transistor is symmetric: The Drain
(which is equivalent to a BJT’s
Collector) and the Source (which is
equivalent to a BJT’s Emitter) are fully
symmetric and therefore
interchangeable

All MOS p-n Junctions
Unlike a BJT transistor, in which one of
the p-n junctions is typically forwardly
biased, and the other reversely biased,
in a MOSFET all p-n junctions must
always be kept reversely biased!

The MOSFET Channel
 Under certain conditions, a thin channel can
be formed right underneath the Silicon-
Dioxide insulating layer, electrically
connecting the Drain to the Source. The
depth of the channel (and hence its
resistance) can be controlled by the Gate’s
voltage. The length of the channel (shown in
the figures above as L) and the channel’s
width W, are important design parameters.

REGION OF OPERATION
CASE-1 (No Gate Voltage)
 Two diodes back to back exist in series.
 One diode is formed by the pn junction
between the n+ drain region and the p-type
substrate
 Second is formed by the pn junction between
the n+ source region and the p-type substrate
 These diodes prevent any flow of the current.
 There exist a very high resistance.

REGION OF OPERATION
Creating a channel
 Apply some positive voltage on the gate
terminal.
 This positive voltage pushes the holes
downward in the substrate region.
 This causes the electrons to accumulate
under the gate terminal.
 At the same time the positive voltage on the
gate also attracts the electrons from the n+
region to accumulate under the gate terminal.

REGION OF OPERATION
Creating a channel
 When sufficient electrons are accumulated under the
gate an n-region is created, connecting the drain and
the source
 This causes the current to flow from the drain to
source
 The channel is formed by inverting the substrate
surface from p to n, thus induced channel is also
called as the inversion layer.
 The voltage between gate and source called vgs at
which there are sufficient electron under the gate to
form a conducting channel is called threshold voltage
Vth.

MOS Channel Formation

Current-Voltage Relations
n+
n+
p-substrate
D
S
G
B
VGS
xL
V(x)
+–
VDS
ID
MOS transistor and its bias conditions

MOS Transistor Current direction
 The source terminal of an n-channel(p-channel)
transistor is defined as whichever of the two terminals
has a lower(higher) voltage.
 When a transistor is turned ON, current flows from
the drain to source in an n-channel device and from
source to drain in a p-channel transistor.
 In both cases, the actual carriers travel from the
source to drain.
 The current directions are different because n-
channel carriers are negative, whereas p-channel
carriers are positive.

Threshold Voltage: Concept
n+n+
p-substrate
DS
G
B
VGS
+
-
Depletion
Region
n-channel

MOS I/V
For a NMOS, a necessary
condition for the channel to exist is:
THGS VV 

REGION OF OPERATION
Applying small Vds
 Now we applying some small voltage
between source and drain say 0.3V.
 The voltage Vds causes a current to flow from
drain to gate.
 Now as we increase the gate voltage, more
current will flow.
 Increasing the gate voltage above the
threshold voltage enhances the channel,
hence this mode is called as enhancement
mode operation.

MOSFET Current-Voltage Relationships
•The DC gate current is always zero: IG = 0
•Therefore, when a channel is created, the drain
current equals the source current: ID =IS

MOS Transistor - Symbols
pMOS Transistor nMOS Transistor

Operation – nMOS Transistor
 Accumulation Mode - If Vgs < 0, then an electric field
is established across the substrate.
 Depletion Mode -If 0<Vgs< Vtn, the region under gate
will be depleted of charges.
 Inversion Mode – If Vgs > Vtn, the region below the
gate will be inverted.

V =0

mos transistor

Recomendados

Recomendados

Mais conteúdo relacionado

Mais procurados

Mais procurados (20)

Destaque

Destaque (20)

Semelhante a mos transistor

Semelhante a mos transistor (20)

Último

Último (20)

mos transistor