Assembly of Tail stock
•Transferir como PPS, PDF•
33 gostaram•33,655 visualizações
Assembly of Tail stock, Computer Aided Machine Drawing (CAMD) of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Recomendados
Mais conteúdo relacionado
Mais procurados
Mais procurados (20)
Destaque
Destaque (11)
Mais de Hareesha N Gowda, Dayananda Sagar College of Engg, Bangalore
Mais de Hareesha N Gowda, Dayananda Sagar College of Engg, Bangalore (20)
Último
Último (20)
Assembly of Tail stock
- 1. Tutorial on Tails Stock Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78 Hareesha N Gowda, DSCE, 1 Blore-78
- 2. PART 1: BODY STEP 1: Protrusion Sketch on YZ plane or right plane as shown in fig Symmetric protrude distance 312 mm Hareesha N Gowda, DSCE, 2 Blore-78
- 3. STEP 2: Cutout Sketch on XZ plane or front plane as shown in fig cutout depth mm 150 mm Hareesha N Gowda, DSCE, 3 Blore-78
- 4. STEP 3: Cutout Sketch on YZ plane or right plane as shown in fig cutout depth up to next surface Hareesha N Gowda, DSCE, 4 Blore-78
- 5. STEP 4: Cutout Sketch on YZ plane or right plane as shown in fig cutout depth up to next surface Hareesha N Gowda, DSCE, 5 Blore-78
- 6. STEP 5: Cutout Sketch on XZ plane or front plane as shown in fig cutout depth through all Hareesha N Gowda, DSCE, 6 Blore-78
- 7. STEP 6: Cutout Sketch on XZ plane or front plane as shown in fig cutout depth through all Hareesha N Gowda, DSCE, 7 Blore-78
- 8. STEP 7: Revolved Protrusion Sketch on XZ plane or front plane as shown in fig revolve protrusion angle 3600 Hareesha N Gowda, DSCE, 8 Blore-78
- 9. STEP 8: Protrusion Sketch on XY plane or Top plane as shown in fig Symmetric protrusion distance 70 mm Hareesha N Gowda, DSCE, 9 Blore-78
- 10. STEP 9: Cutout Sketch on YZ plane or front plane as shown in fig cutout depth 70 mm Hareesha N Gowda, DSCE, 10 Blore-78
- 11. STEP 10: Hole Hole 1 of diameter 38 mm through all Hole 2 of diameter 22 mm depth 35 mm Hole 3 of diameter 8 mm, 4 holes depth 15 mm Hareesha N Gowda, DSCE, 11 Blore-78
- 12. PART 3:BARREL Sketch on XZ plane or front plane as shown in fig Use revolve protrusion angle 360o cutout dimension 4.5 x 3 mm length 245 mm Hareesha N Gowda, DSCE, 12 Blore-78
- 13. PART 4:SCREW SPINDLE Sketch on XZ plane or front plane as shown in fig Use revolve protrusion angle 360o cut out 4.5 x2.25 and 28 mm length Hareesha N Gowda, DSCE, 13 Blore-78
- 14. PART13 handle Sketch on XZ plane or front plane as shown in fig Use revolve protrusion angle 360o sketch on XY or top plane as shown Symmetric protrusion distance 40 mm Hareesha N Gowda, DSCE, 14 Blore-78
- 15. PART19 CENTRE Sketch on XZ plane or front plane as shown in fig Use revolve protrusion angle 360o Hareesha N Gowda, DSCE, 15 Blore-78
- 16. PART 8 HAND WHEEL Step 1: Sketch on XZ plane or front plane as shown in fig Use revolve protrusion angle 360o Hareesha N Gowda, DSCE, 16 Blore-78
- 17. PART 8 HAND WHEEL Step 2: Sketch on XZ plane or front plane as shown in fig Use revolve protrusion angle 360o Hareesha N Gowda, DSCE, 17 Blore-78
- 18. PART 8 HAND WHEEL Step 3: Sketch on YZ plane or right plane as shown in fig Use lofted protrusion Hareesha N Gowda, DSCE, 18 Blore-78
- 19. PART 8 HAND WHEEL Step 4: circular pattern according to the requirement Hareesha N Gowda, DSCE, 19 Blore-78